Spiral Torsion Spring Optimization Design for Separation Devices

As a driving element,the spiral torsion spring can control the release velocity by the optimization design of spring parameters and be used for separation devices,which is conducive to unlocking synchronicity and low-shock of the separation. On the basis of analyzing the performance requirements of the spiral torsion spring in a spacecraft device,the optimization design model of the spiral torsion spring is given, which takes the spiral torsion spring's length,width and thickness as the optimization variables,and the minimum volume as the optimization objective. The model considers output torque,strength,the maximal resetting load,holding force,and low shock as constraint conditions. A case is given to analyze the proposed model. The analysis results show the optimization scheme decreases the volume of the spiral torsion spring and meets the performance requirements of the separation device.

Preload relaxation analysis and reliable life prediction of space connection and separation device based on accelerated degradation tests

The safety and reliability of space connection and separation device has become a key issue due to the increasing service span of deep space exploration mission.The long-term preload relaxation(a key failure mode)of connection and separation devices is focused in this paper.A series of tests have been designed and implemented to investigate the preload relaxation regulation and a comprehensive method has been constructed to analyze and predict the reliable lifetime of the device.The two-stage preload relaxation law of the device is found and reasonably considered.Due to the different relaxation mechanism,the first-stage preload relaxation is assessed based on the working-condition test results,and the second-stage preload relaxation is characterized by accelerated test results.Finally,the service reliability and reliable life are evaluated.The experiment and assessment results demonstrate the reasonability and effectiveness of the proposed method which can achieve long-service reliability analysis for space connection and separation device within limited time.

WEAKLY SWIRLING TURBULENT FLOW IN TURBID WATER HYDRAULIC SEPARATION DEVICE

This article deals with the characteristics of weakly swirling turbulent flow field in a Turbid Water Hydraulic Separation Device （TWHSD） through experimental and numerical researches. The flow field was measured by PIV, which provided streamlines, vortex structure, vorticity and velocity distribution in different test planes in the TWHSD. On the basis of the experimental results, the tangential and radial velocity distributions of the swirling flow field were obtained. Meanwhile, the numerical simulations were conducted with the RNG κ-ε and RSM turbulence models, respectively. According to the experimental and numerical results, the characteristics of the clear water flow field inside the TWHSD were determined. In view of simulation accuracy and time consumption, it is suggested to apply the RNG κ-ε model instead of the RSM model, which is more time consuming, to make further study on two-phases flow fields in the device.

A New Heat Transfer Model for Multi-Gradient Drilling with Hollow Sphere Injection

Multi-gradient drilling is a new offshore drilling method.The accurate calculation of the related wellbore temperature is of great significance for the prediction of the gas hydrate formation area and the precise control of the wellbore pressure.In this study,a new heat transfer model is proposed by which the variable mass flow is properly taken into account.Using this model,the effects of the main factors influencing the wellbore temperature are analyzed.The results indicate that at the position where the separation injection device is installed,the temperature increase of the fluid in the drill pipe is mitigated due to the inflow/outflow of hollow spheres,and the temperature drop of the fluid in the annulus also decreases.In addition,a lower separation efficiency of the device,a shallower installation depth and a smaller circulating displacement tend to increase the temperature near the bottom of the annulus,thereby helping to reduce the hydrate generation area and playing a positive role in the prevention and control of hydrates in deepwater drilling.

Experimental Study on the Performance of an Onboard Hollow-Fiber-Membrane Air Separation Module

Onboard air separation devices,based on hollow fiber membranes,are traditionally used for the optimization of aircraft fuel tank inerting systems.In the present study,a set of tests have been designed and executed to assess the air separation performances of these systems for different air inlet temperatures(70°C∼110°C),inlet pressures(0.1∼0.4 MPa),volume flow rates of nitrogen-enriched air(NEA)(30∼120 L/min)and flight altitudes(1.5∼18 km).In particular,the temperature,pressure,volume flow rate,and oxygen concentration of air,NEA and oxygen-enriched air(OEA)have been measured.The experimental results show that the oxygen concentration of NEA,air separation coefficient,and nitrogen utilization coefficient decrease with the rising of air inlet temperature,air inlet pressure,and flight altitude.The effect of air inlet pressure on the above three parameters is significant,while the influence of air inlet temperature and flight altitude is relatively small.

Dynamic resistive switching in a three-terminal device based on phase separated manganites

A three-terminal device based on electronic phase separated manganites is suggested to produce high performance resistive switching. Our Monte Carlo simulations reveal that the conductive filaments can be formed/annihilated by reshaping the ferromagnetic metal phase domains with two cross-oriented switching voltages. Besides, by controlling the high resistance state（HRS） to a stable state that just after the filament is ruptured, the resistive switching remains stable and reversible, while the switching voltage and the switching time can be greatly reduced.

面向商业小卫星的记忆合金星箭分离装置研制

Non-pyrotechnic separation devices have been fully recognized for their high performance and high reliability.The focus of this paper is mainly around the development of memory alloy satellite and rocket separation devices.Due to the increasing demand for small-sized rockets and satellites,some suggestions and experiments for developing this new type of non-pyrotechnic device are proposed and conducted.

Hierarchical Porous Polymer Beads Prepared by Polymerization-induced Phase Separation and Emulsion-template in a Microfluidic Device

Porous polymer beads（PPBs） containing hierarchical bimodal pore structure with gigapores and meso-macropores were prepared by polymerization-induced phase separation（PIPS） and emulsion-template technique in a glass capillary microfluidic device（GCMD）. Fabrication procedure involved the preparation of water-in-oil emulsion by emulsifying aqueous solution into the monomer solution that contains porogen. The emulsion was added into the GCMD to fabricate the（water-in-oil）-in-water double emulsion droplets. The flow rate of the carrier continuous phase strongly influenced the formation mechanism and size of droplets. Formation mechanism transformed from dripping to jetting and size of droplets decreased from 550 μm to 250 μm with the increase in flow rate of the carrier continuous phase. The prepared droplets were initiated for polymerization by on-line UV-irradiation to form PPBs. The meso-macropores in these beads were generated by PIPS because of the presence of porogen and gigapores obtained from the emulsion-template. The pore morphology and pore size distribution of the PPBs were investigated extensively by scanning electron microscopy and mercury intrusion porosimetry（MIP）. New pore morphology was formed at the edge of the beads different from traditional theory because of different osmolarities between the water phase of the emulsion and the carrier continuous phase. The morphology and proportion of bimodal pore structure can be tuned by changing the kind and amount of porogen.

Study the Characteristics of Titanium Oxide Hydrogen Ion Sensor Using XRD and AES

We study the extended gate ion sensitive structure,and deposit the titanium oxide (TiO_2) thin film on p-type (100) silicon substrate.The device of the hydrogen ion sensing structure is TiO_2/Si-substrate,and a commercial device of the metal oxide semiconductor field effect transistor (MOSFET) is connected to the separative sensing device.The sensitivity and linearity are measured under different work pressures.When the mixed ratio of Ar/O_2 is 80 ml·min^(-1)/20 ml·min^(-1),the work pressure is 4 Pa,the sputtering power is 150 W,and the sputtering time is two hours,the better sensing properties of the sensitivity and linearity are 36.49 mV/pH and 0.99654,respectively.However,some instruments are analyzed the surface of TiO_2 membrane,such as X-ray diffraction (XRD) and Auger Electron Spectrometer (AES).The characteristics of TiO_2 thin film can be demonstrated.

Simulation and test on separating cleaning process of flax threshing material based on gas-solid coupling theory

In order to further clarify and improve the working performance of separating cleaning device of flax threshing material,and study the motion law and characteristics of components of flax threshing material,in this paper,numerical simulation was carried out on the separating cleaning process of flax threshing material based on CFD-DEM method.Simulation results showed that the components of flax threshing material were separated and cleaned under the influence of airflow field,meanwhile,variation curves of quantity and mean velocity of flax seeds in the separating cleaning system were obtained.By referring to streamline distribution of gas-solid coupling,the quantity variation law of components of flax threshing material with time was explored and their motion curves and variation tendency of average velocity were studied.Verification test results showed that the cleaning rate of separating cleaning device for flax threshing material was 92.66%with 1.58%of total separation loss.Compared with simulation results,the test results were 1.34%and 0.93%lower,showing that it is feasible to apply the gas-solid coupling theory and method to simulate the separating and cleaning operation of flax threshing material.