The separation of halogens and recovery of heavy metals from secondary copper smelting(SCS)dust using a sulfating roasting−water leaching process were investigated.The thermodynamic analysis results confirm the feasib...The separation of halogens and recovery of heavy metals from secondary copper smelting(SCS)dust using a sulfating roasting−water leaching process were investigated.The thermodynamic analysis results confirm the feasibility of the phase transformation to metal sulfates and to gaseous HF and HCl.Under the sulfating roasting conditions of the roasting temperature of 250℃ and the sulfuric acid excess coefficient of 1.8,over 74 wt.%of F and 98 wt.%of Cl were volatilized into flue gas.Approximately 98.6 wt.%of Zn and 96.5 wt.%of Cu in the roasting product were dissolved into the leaching solution after the water leaching process,while the leaching efficiencies of Pb and Sn were only 0.12%and 0.22%,respectively.The mechanism studies indicate the pivotal effect of roasting temperature on the sulphation reactions from various metal species to metal sulfates and the salting out reactions from various metal halides to gaseous hydrogen halides.展开更多
Flow visualization was used to investigate experimentally the evolution process from symmetrical shedding to staggered shedding of the starting vortex and the phenomenon of secondary separation on an elliptic cylinder...Flow visualization was used to investigate experimentally the evolution process from symmetrical shedding to staggered shedding of the starting vortex and the phenomenon of secondary separation on an elliptic cylinder at moderate Reynolds numbers.The vortex structure of the flow separation was studied.The temporal variation of separation angle and length of wake vortex were given. The photographs and experimental results provided basis for further investigation of the complicated feature of the starting process of unsteady separated flows around an elliptic cylinder.展开更多
China's rural land rights are incomplete in structure of land rights and functions due to status restriction. Settling dispute and problem of status in rural land right and function structure is of great significa...China's rural land rights are incomplete in structure of land rights and functions due to status restriction. Settling dispute and problem of status in rural land right and function structure is of great significance for determining and guaranteeing subjects of rural land rights. The point connecting and solving rural land circulation issue is demonstration and settlement of status. Separating the status right from rural land property right,namely the secondary separation of right,is to realize such purpose. Currently,China's rural land right is a bundle of rights,not the right described in property pedigree in strict sense. Using theory of rights of Hohfeld,this paper discussed and analyzed legal relationship of secondary separation of China's rural land rights,in the hope of realizing real return from practice to theory and to practice again.展开更多
The synthesis of a continuous IMF zeolite membrane was fabricated on tubular substrates by seeded growth for the first time. The straight channels of IMF zeolite with diameters of 0.53–0.59 nm are distinguishable for...The synthesis of a continuous IMF zeolite membrane was fabricated on tubular substrates by seeded growth for the first time. The straight channels of IMF zeolite with diameters of 0.53–0.59 nm are distinguishable for p-xylene from o-xylene molecules. Pure IMF-phase high-silica IM-5 zeolite seeds with uniform and fine crystal size were fabricated by a new sonication-assisted aging process. The seeds were coated on the support by dipcoating and induced the formation of continuous membrane. Separation performance in p-/o-xylene mixture was investigated at various temperature and pressure. The typical IM-5zeolite membrane had p-/o-xylene separation factor of 3.7. Our results suggest that IM-5 zeolite is a potentially good membrane material for the separation of xylene mixtures.展开更多
This study synthesised a zincic salt(ZS)as a depressant for marmatite-galena separation.The effect of ZS on the flotation of marmatite and galena was investigated through micro-flotation tests.88.89%of the galena was ...This study synthesised a zincic salt(ZS)as a depressant for marmatite-galena separation.The effect of ZS on the flotation of marmatite and galena was investigated through micro-flotation tests.88.89%of the galena was recovered and 83.39%of the marmatite was depressed with ZS dosage of 750 mg·L^(−1)at pH=4.The depression mechanism of ZS on marmatite was investigated by a variety of techniques,including adsorption measurements,Fourier transform infrared(FTIR),X-ray photoelectron spectroscopic(XPS)analysis,and time of flight secondary ion mass spectrometry(ToF-SIMS).Results of adsorption tests and FTIR reveal that ZS adsorbed on marmatite surface and impeded the subsequent adsorption of butyl xanthate(BX).The results of XPS and ToF-SIMS indicate that the ZnO_(2)^(3-)released by ZS could be chemisorbed on the marmatite surface and depress marmatite flotation.展开更多
A DTM map of the study area in the Taiwan Shoal was drawn based on precise and high- density data acquired in a field survey by a multi-beam sounding system (R2Sonic2024). We identified sand waves in the study area ...A DTM map of the study area in the Taiwan Shoal was drawn based on precise and high- density data acquired in a field survey by a multi-beam sounding system (R2Sonic2024). We identified sand waves in the study area at water depths of 13.89-49.12 m; the main sand waves had heights of 5- 25 m, lengths of 0.1-2.0 km, and crest lines 0.1-6.5 km long. The spatial distribution of the sand waves on the seabed is dense in the north and sparse in the south and the directions range between 50°-80° and 90°-135°. Between the main sand waves, secondary sand waves develop with heights of 0.1-5.0 m and lengths of 10-100 m, which are difficult to detect by satellite remote sensing. By comparing the evolution structures of the secondary and main sand waves, we identified three evolution modes of the secondary sand waves: parallel, oblique, and divergent modes according to the relative crest directions. Suitable water depth, reciprocating current speeds between 40 and 100 cm/s, and abundant sediment supply create favorable conditions for the formation of linear sand waves. Comparing the DTM maps and profiles of the June 2012 and June 2013 surveys of the same area, we found that the shape and morphology of the sand waves remained mostly unchanged under normal hydrodynamic conditions.展开更多
Flow and thermal field of a parallel flow vortex tube has been simulated and analyzed numerically. A secondary zone model is found at the core region near the inlet to the middle of the vortex tube. Blockage effect du...Flow and thermal field of a parallel flow vortex tube has been simulated and analyzed numerically. A secondary zone model is found at the core region near the inlet to the middle of the vortex tube. Blockage effect due to a narrow area of the hot exit has deflected air flow towards the cold exit, caused expansion and compression at the cold and hot outlet, respectively. The cooling and heating effect due to energy separation is contributed by expansion and compression of air near the outlet. Coeficient of performance (COP) for a refrigerator is higher as cold mass fraction increases due to a higher temperature difference and cold mass flow rate.展开更多
The airwave effect greatly influences the observational data from controlledsource electromagnetic exploration in shallow seas, which obscures the abnormal effects generated by exploration targets and, hence, affects ...The airwave effect greatly influences the observational data from controlledsource electromagnetic exploration in shallow seas, which obscures the abnormal effects generated by exploration targets and, hence, affects the accuracy of the late exploration data interpretation. In this study, we propose a method to separate the main part from the anomalous field of marine controlled-source electromagnetic method (MCSEM) data based on Stratton-Chu integral transforms to eliminate the airwave effect, which dominates observed electromagnetic (EM) response in shallow seawater. This method of separating the main part from the anomalous field is a type of finite impulse response filter based on a discrete data set. Theoretical analysis proved that the method is stable and able to effectively depress noise. A numerical test indicated that the method could successfully eliminate the airwave effect from the observed EM signals generated by an air water interface and a seawater layer. This technique is applicable for seawater models with either flat or rough seabeds.展开更多
Granular wastes have negative effects on the environment due to contamination. On the other hand, stony components in granular wastes have a potential good perspectives for utilization in civil engineering works as se...Granular wastes have negative effects on the environment due to contamination. On the other hand, stony components in granular wastes have a potential good perspectives for utilization in civil engineering works as secondary raw building materials. To reuse such materials without environmental risks, all contaminants must be removed or reduced to an acceptable level. Therefore liberation of materials is an important step in waste treatment. For this purpose, separation and cleansing techniques are suitable. Based on the analysis of contaminants in wastes, it is discussed how to select suitable techniques. The rules for technique selection and processes for quality improvement are set up. To evaluate the environmental quality and technical quality of output products, it is necessary to check leaching behaviours and physical properties.展开更多
On the basis of reviewing the progress in the high efficient enrichment from secondary resources of low grade precious metals at home and abroad, a process route of the high efficient enrichment precious metals from s...On the basis of reviewing the progress in the high efficient enrichment from secondary resources of low grade precious metals at home and abroad, a process route of the high efficient enrichment precious metals from secondary resources of low-grade metals by adding iron oxide as the trapping agent, reducing agent, additive, mixing uniformly and grinding, pelletizing, reduction, grinding and separation, and selectively acid leaching iron has been put forward in this paper. The experiments of reduction, grinding and separation, and selectively acid leaching iron were carried out mainly. Under the decided experiment parameters and conditions, iron generated during the reduction can trap precious metals during reduction, high active alloy powders were obtained from the reduced products by grinding and separation, the concentration of precious metals was obtained by acid leaching high active alloy powders. The better enrichment effect was obtained by adopting the technical route of processing. Other low grade noble metal materials and enrichment ratio of precious metals from the materials to acid products was high through acid leaching. This process has the advantages of simple process, environmental-friendly, strong adaptability of raw materials, high concentration ratio, which was regarded as a kind of the general efficient enrichment technology of low grade precious metal materials.展开更多
Classification,superimposed evolution and sedimentary filling of prototype basins are analyzed based on the Wilson cycle principle of plate theory,by dissecting the evolution history of 483 sedimentary basins around t...Classification,superimposed evolution and sedimentary filling of prototype basins are analyzed based on the Wilson cycle principle of plate theory,by dissecting the evolution history of 483 sedimentary basins around the world since the Pre-cambrian,combined with the three stress environments of tension,compression and shear.It is found that plate tectonic evo-lution controls the superimposed development process and petroleum-bearing conditions of the prototype basins in three as-pects:first,more than 85%of the sedimentary basins in the world are developed from the superimposed development of two or more prototype basins;second,the superposition evolution process of the prototype basin takes Wilson cycle as the cycle and cycles in a fixed trajectory repeatedly.In each stage of a cycle,a specific type of prototype basin can be formed;third,each prototype basin can form a unique tectonic-sedimentary system,which determines its unique source,reservoir,cap conditions etc.For hydrocarbon accumulation,the later superimposed prototype basin can change the oil and gas accumulation conditions of the earlier prototype basin,and may form new petroleum systems.Based on this,by defining the type of a current basin as its prototype basin formed by the latest plate tectonic movement,14 types of prototype basins can be classified in the world,namely,intracontinental growth rift,intr acontinental aborted rift,intercontinental rift,passive continental margin,interior craton,trench,fore-arc rift,ba ck-arc rift,back-arc de pression,back-arc small ocean,peri pheral foreland,back-arc foreland,strike-slip pull-apart,and strike-slip flexural basins.The classification scheme can ensure the uniqueness of the types of in di-vidual sedimentary basin,and make it possible to predict their oil and gas potential scientifically through analogy.展开更多
The aim of this article is to present the principles of the operation of the Warsaw Stock Exchange (WSE), which is the most important institution of the capital market in Poland. The article is an attempt to explore...The aim of this article is to present the principles of the operation of the Warsaw Stock Exchange (WSE), which is the most important institution of the capital market in Poland. The article is an attempt to explore the history and structure of the exchange and its investment possibilities in order to understand the number of existing security features which make cooperation with this institution-with appropriate assumptions and diversification-an activity providing profits to potential investors who are aware of its operating rules. This topic deserves a historical outline because of the socialist past and the current status of the WSE, now called the most dynamically growing capital market in Central and Eastern Europe.展开更多
The equivalent damage calculation formulae of fatigue crack formation andgrowth are established. In order to compile the fatigue crack formation and growth accelerated loadspectra, the main wave shapes and load sequen...The equivalent damage calculation formulae of fatigue crack formation andgrowth are established. In order to compile the fatigue crack formation and growth accelerated loadspectra, the main wave shapes and load sequence of the actual load spectrum are kept constant, andthe carrier waves are cut off. And secondary waves are put together into new secondary waves toshorten the test time according to the equivalent damage calculation formulae respectively. Then bythe fatigue cumulative damage calculation of the fatigue crack formation and growth accelerated loadspectra, the one corresponding to the bigger damage is determined as the fatigue accelerated testload spectrum. Therefore in the test process, the fatigue accelerated test spectrum may be appliedtill fatigue failure, the engineering fatigue crack length of full-scale structure need not beinspected, and the fatigue crack formation accelerated load spectrum need not be transferred intothe fatigue crack growth accelerated load spectrum. Finally, it is verified by tests of two kinds ofspecimens that the damages of the specimens caused by the accelerated load spectra are near tothose by the actual load spectra; namely, the tested life of actual load spectra is similar to thatof accelerated load spectra. But the test time of accelerated load spectra is shortened by aboutthree-quarters that of actual load spectra. From these tests, it is also found that the fatigueaccelerated test spectrum has an advantage over FALSTAFF spectra.展开更多
For a cyclone, it is possible to improve separation efficiency and reduce pressure drop by increasing the cyclone height. However, an exceeded height increase could result in a dramatical drop in separation efficiency...For a cyclone, it is possible to improve separation efficiency and reduce pressure drop by increasing the cyclone height. However, an exceeded height increase could result in a dramatical drop in separation efficiency. In this study, experimental and computational fluid dynamics simulation results exhibit that the introduction of an apex cone at the dust outlet could avoid the risk of separation efficiency drop but lead to a continuous reducing of the pressure drop. Generally, the optimal cyclone height should be closely related to the natural vortex length. While, when the vortex end contracts into the separation space in the cyclone with an exceeded height, severe back-mixing of particles always occurs, which will result in the decrease of separation efficiency. Herein, it is found that when an apex cone is installed at the dust outlet, the vortex end can be grasped by the cone so as to weaken the back-mixing of particles.Meanwhile, the introduction of this apex cone can enhance the secondary separation to capture the back-mixed particles again so as to protect the efficiency. In addition, it is found that the enhanced secondary separation could come from either the stagnant current of axial velocity in the center or the improved tangential velocity of inner vortex whereas the forcibly extending the length of vortex to exceed its natural length will not significantly increase efficiency.展开更多
In this paper,two new concepts—“main out-of-step mode” and “minor out-of-step mode”—are proposed for power system reliability analysis. Large-scale power system studies found that out-of-step generator groups ma...In this paper,two new concepts—“main out-of-step mode” and “minor out-of-step mode”—are proposed for power system reliability analysis. Large-scale power system studies found that out-of-step generator groups may have characteristics of the main out-of-step mode and the minor out-of-step mode. The generator groups with main out-of-step modes can determine the out-of-step interface of the large-scale power system,while generators with the minor out-of-step modes cannot play such a role. Therefore,the method of capturing the out-of-step interface by seeking the lowest voltage point(the out-of-step center) can only group the generators with the main out-of-step modes,and may fail to combine the generators with the minor out-of-step modes into proper coherent generator groups. Thus,it is necessary in engineering applications to equip the generators that are likely to have the characteristics of the minor out-of-step modes with separation devices based on off-line simulation studies in order to reduce the risk of further accidents caused by these generators after system separation.展开更多
In a Zippe-type 3-pole gas centrifuge, feed gas is introduced through a sonic nozzle into the rarefied region in the rotor. Introduction of the nonrotating feed gas will slow the whirl flow and introduce a secondary r...In a Zippe-type 3-pole gas centrifuge, feed gas is introduced through a sonic nozzle into the rarefied region in the rotor. Introduction of the nonrotating feed gas will slow the whirl flow and introduce a secondary recirculating flow in the meridian plane. The effects of feed gas on the output of a gas centrifuge are investigated. The non-linear. axisymmetric N-S equations are used to calculate the secondary flow induced by the feed gas. Three types of numerical schemes. an implicit scheme similar to the Beam-Warming scheme. an implicit unfactorized scheme and an improved Newton-Raphson scheme are used. The Cohen separation theory with axial variation is used forcalculating the isotope concentration. Optimization of the output is achieved by automatic variation of the weighting factors for a number of linear flow solutions which can be superimposed. A Rome type centrifuge is analyzed as an example. Results show the recirculating flow caused by the feed gas. especially the acceleration loss. has an important effect on the output of a gas centrifuge.展开更多
基金the National Key Research and Development Program of China(No.2019YFC1908400)the National Natural Science Foundation of China(Nos.52174334,52374413)+3 种基金the Jiangxi Provincial Cultivation Program for Academic and Technical Leaders of Major Subjects,China(Nos.20212BCJ23007,20212BCJL23052)the Jiangxi Provincial Natural Science Foundation,China(Nos.20224ACB214009,20224BAB214040)the Double Thousand Plan of Jiangxi Province,China(No.S2021GDQN2970)the Distinguished Professor Program of Jinggang Scholars in Institutions of Higher Learning of Jiangxi Province,China.
文摘The separation of halogens and recovery of heavy metals from secondary copper smelting(SCS)dust using a sulfating roasting−water leaching process were investigated.The thermodynamic analysis results confirm the feasibility of the phase transformation to metal sulfates and to gaseous HF and HCl.Under the sulfating roasting conditions of the roasting temperature of 250℃ and the sulfuric acid excess coefficient of 1.8,over 74 wt.%of F and 98 wt.%of Cl were volatilized into flue gas.Approximately 98.6 wt.%of Zn and 96.5 wt.%of Cu in the roasting product were dissolved into the leaching solution after the water leaching process,while the leaching efficiencies of Pb and Sn were only 0.12%and 0.22%,respectively.The mechanism studies indicate the pivotal effect of roasting temperature on the sulphation reactions from various metal species to metal sulfates and the salting out reactions from various metal halides to gaseous hydrogen halides.
基金The project supported by the National Natural Science Foundation of China.
文摘Flow visualization was used to investigate experimentally the evolution process from symmetrical shedding to staggered shedding of the starting vortex and the phenomenon of secondary separation on an elliptic cylinder at moderate Reynolds numbers.The vortex structure of the flow separation was studied.The temporal variation of separation angle and length of wake vortex were given. The photographs and experimental results provided basis for further investigation of the complicated feature of the starting process of unsteady separated flows around an elliptic cylinder.
基金Supported by Doctoral Dissertation Grant Program of China University of Political Science and Law in 2015(2015BSLW07)
文摘China's rural land rights are incomplete in structure of land rights and functions due to status restriction. Settling dispute and problem of status in rural land right and function structure is of great significance for determining and guaranteeing subjects of rural land rights. The point connecting and solving rural land circulation issue is demonstration and settlement of status. Separating the status right from rural land property right,namely the secondary separation of right,is to realize such purpose. Currently,China's rural land right is a bundle of rights,not the right described in property pedigree in strict sense. Using theory of rights of Hohfeld,this paper discussed and analyzed legal relationship of secondary separation of China's rural land rights,in the hope of realizing real return from practice to theory and to practice again.
基金the financial supports that are from the National Natural Science Foundation of China (21921006, U22A20414 and 21938007)the Natural Science Foundation of Jiangsu Province (BK20220002)the open project of the State Key Laboratory of China (KL21-04 and D2021FK055)。
文摘The synthesis of a continuous IMF zeolite membrane was fabricated on tubular substrates by seeded growth for the first time. The straight channels of IMF zeolite with diameters of 0.53–0.59 nm are distinguishable for p-xylene from o-xylene molecules. Pure IMF-phase high-silica IM-5 zeolite seeds with uniform and fine crystal size were fabricated by a new sonication-assisted aging process. The seeds were coated on the support by dipcoating and induced the formation of continuous membrane. Separation performance in p-/o-xylene mixture was investigated at various temperature and pressure. The typical IM-5zeolite membrane had p-/o-xylene separation factor of 3.7. Our results suggest that IM-5 zeolite is a potentially good membrane material for the separation of xylene mixtures.
基金financially supported by the National Natural Science Foundation of China(No.52274283)the Fundamental Research Funds for the Central Universities(No.2022JCCXHH09)+1 种基金the Yueqi Outstanding Scholar award of CUMTB,the Science and Technology Major Project of Ordos City-Iconic Innovation Team(No.202204)the National Key R&D Program of China(Nos.2022YFC2900065 and 2021YFC2902602).
文摘This study synthesised a zincic salt(ZS)as a depressant for marmatite-galena separation.The effect of ZS on the flotation of marmatite and galena was investigated through micro-flotation tests.88.89%of the galena was recovered and 83.39%of the marmatite was depressed with ZS dosage of 750 mg·L^(−1)at pH=4.The depression mechanism of ZS on marmatite was investigated by a variety of techniques,including adsorption measurements,Fourier transform infrared(FTIR),X-ray photoelectron spectroscopic(XPS)analysis,and time of flight secondary ion mass spectrometry(ToF-SIMS).Results of adsorption tests and FTIR reveal that ZS adsorbed on marmatite surface and impeded the subsequent adsorption of butyl xanthate(BX).The results of XPS and ToF-SIMS indicate that the ZnO_(2)^(3-)released by ZS could be chemisorbed on the marmatite surface and depress marmatite flotation.
基金Funding was provided by the Marine Public Special Project (201105001 and 201205004)the Natural Science Foundation (China project, 41276058)
文摘A DTM map of the study area in the Taiwan Shoal was drawn based on precise and high- density data acquired in a field survey by a multi-beam sounding system (R2Sonic2024). We identified sand waves in the study area at water depths of 13.89-49.12 m; the main sand waves had heights of 5- 25 m, lengths of 0.1-2.0 km, and crest lines 0.1-6.5 km long. The spatial distribution of the sand waves on the seabed is dense in the north and sparse in the south and the directions range between 50°-80° and 90°-135°. Between the main sand waves, secondary sand waves develop with heights of 0.1-5.0 m and lengths of 10-100 m, which are difficult to detect by satellite remote sensing. By comparing the evolution structures of the secondary and main sand waves, we identified three evolution modes of the secondary sand waves: parallel, oblique, and divergent modes according to the relative crest directions. Suitable water depth, reciprocating current speeds between 40 and 100 cm/s, and abundant sediment supply create favorable conditions for the formation of linear sand waves. Comparing the DTM maps and profiles of the June 2012 and June 2013 surveys of the same area, we found that the shape and morphology of the sand waves remained mostly unchanged under normal hydrodynamic conditions.
文摘Flow and thermal field of a parallel flow vortex tube has been simulated and analyzed numerically. A secondary zone model is found at the core region near the inlet to the middle of the vortex tube. Blockage effect due to a narrow area of the hot exit has deflected air flow towards the cold exit, caused expansion and compression at the cold and hot outlet, respectively. The cooling and heating effect due to energy separation is contributed by expansion and compression of air near the outlet. Coeficient of performance (COP) for a refrigerator is higher as cold mass fraction increases due to a higher temperature difference and cold mass flow rate.
基金supported by the National Natural Science Foundation of China(No.41574067)863 Program(No.2012AA09A404)
文摘The airwave effect greatly influences the observational data from controlledsource electromagnetic exploration in shallow seas, which obscures the abnormal effects generated by exploration targets and, hence, affects the accuracy of the late exploration data interpretation. In this study, we propose a method to separate the main part from the anomalous field of marine controlled-source electromagnetic method (MCSEM) data based on Stratton-Chu integral transforms to eliminate the airwave effect, which dominates observed electromagnetic (EM) response in shallow seawater. This method of separating the main part from the anomalous field is a type of finite impulse response filter based on a discrete data set. Theoretical analysis proved that the method is stable and able to effectively depress noise. A numerical test indicated that the method could successfully eliminate the airwave effect from the observed EM signals generated by an air water interface and a seawater layer. This technique is applicable for seawater models with either flat or rough seabeds.
文摘Granular wastes have negative effects on the environment due to contamination. On the other hand, stony components in granular wastes have a potential good perspectives for utilization in civil engineering works as secondary raw building materials. To reuse such materials without environmental risks, all contaminants must be removed or reduced to an acceptable level. Therefore liberation of materials is an important step in waste treatment. For this purpose, separation and cleansing techniques are suitable. Based on the analysis of contaminants in wastes, it is discussed how to select suitable techniques. The rules for technique selection and processes for quality improvement are set up. To evaluate the environmental quality and technical quality of output products, it is necessary to check leaching behaviours and physical properties.
基金The National Basic Research Program( 973 Plan) of China(2012CB724201)
文摘On the basis of reviewing the progress in the high efficient enrichment from secondary resources of low grade precious metals at home and abroad, a process route of the high efficient enrichment precious metals from secondary resources of low-grade metals by adding iron oxide as the trapping agent, reducing agent, additive, mixing uniformly and grinding, pelletizing, reduction, grinding and separation, and selectively acid leaching iron has been put forward in this paper. The experiments of reduction, grinding and separation, and selectively acid leaching iron were carried out mainly. Under the decided experiment parameters and conditions, iron generated during the reduction can trap precious metals during reduction, high active alloy powders were obtained from the reduced products by grinding and separation, the concentration of precious metals was obtained by acid leaching high active alloy powders. The better enrichment effect was obtained by adopting the technical route of processing. Other low grade noble metal materials and enrichment ratio of precious metals from the materials to acid products was high through acid leaching. This process has the advantages of simple process, environmental-friendly, strong adaptability of raw materials, high concentration ratio, which was regarded as a kind of the general efficient enrichment technology of low grade precious metal materials.
基金Supported by the National Science and Technology Major Project of China(2016ZX0602900)。
文摘Classification,superimposed evolution and sedimentary filling of prototype basins are analyzed based on the Wilson cycle principle of plate theory,by dissecting the evolution history of 483 sedimentary basins around the world since the Pre-cambrian,combined with the three stress environments of tension,compression and shear.It is found that plate tectonic evo-lution controls the superimposed development process and petroleum-bearing conditions of the prototype basins in three as-pects:first,more than 85%of the sedimentary basins in the world are developed from the superimposed development of two or more prototype basins;second,the superposition evolution process of the prototype basin takes Wilson cycle as the cycle and cycles in a fixed trajectory repeatedly.In each stage of a cycle,a specific type of prototype basin can be formed;third,each prototype basin can form a unique tectonic-sedimentary system,which determines its unique source,reservoir,cap conditions etc.For hydrocarbon accumulation,the later superimposed prototype basin can change the oil and gas accumulation conditions of the earlier prototype basin,and may form new petroleum systems.Based on this,by defining the type of a current basin as its prototype basin formed by the latest plate tectonic movement,14 types of prototype basins can be classified in the world,namely,intracontinental growth rift,intr acontinental aborted rift,intercontinental rift,passive continental margin,interior craton,trench,fore-arc rift,ba ck-arc rift,back-arc de pression,back-arc small ocean,peri pheral foreland,back-arc foreland,strike-slip pull-apart,and strike-slip flexural basins.The classification scheme can ensure the uniqueness of the types of in di-vidual sedimentary basin,and make it possible to predict their oil and gas potential scientifically through analogy.
文摘The aim of this article is to present the principles of the operation of the Warsaw Stock Exchange (WSE), which is the most important institution of the capital market in Poland. The article is an attempt to explore the history and structure of the exchange and its investment possibilities in order to understand the number of existing security features which make cooperation with this institution-with appropriate assumptions and diversification-an activity providing profits to potential investors who are aware of its operating rules. This topic deserves a historical outline because of the socialist past and the current status of the WSE, now called the most dynamically growing capital market in Central and Eastern Europe.
基金This project is supported by National Natural Science and Aeronautic Science Foundation of China (No. 50005003, No. 01A51011)
文摘The equivalent damage calculation formulae of fatigue crack formation andgrowth are established. In order to compile the fatigue crack formation and growth accelerated loadspectra, the main wave shapes and load sequence of the actual load spectrum are kept constant, andthe carrier waves are cut off. And secondary waves are put together into new secondary waves toshorten the test time according to the equivalent damage calculation formulae respectively. Then bythe fatigue cumulative damage calculation of the fatigue crack formation and growth accelerated loadspectra, the one corresponding to the bigger damage is determined as the fatigue accelerated testload spectrum. Therefore in the test process, the fatigue accelerated test spectrum may be appliedtill fatigue failure, the engineering fatigue crack length of full-scale structure need not beinspected, and the fatigue crack formation accelerated load spectrum need not be transferred intothe fatigue crack growth accelerated load spectrum. Finally, it is verified by tests of two kinds ofspecimens that the damages of the specimens caused by the accelerated load spectra are near tothose by the actual load spectra; namely, the tested life of actual load spectra is similar to thatof accelerated load spectra. But the test time of accelerated load spectra is shortened by aboutthree-quarters that of actual load spectra. From these tests, it is also found that the fatigueaccelerated test spectrum has an advantage over FALSTAFF spectra.
基金sponsored by the National Natural Science Foundation of China (21506139 and U1710101)。
文摘For a cyclone, it is possible to improve separation efficiency and reduce pressure drop by increasing the cyclone height. However, an exceeded height increase could result in a dramatical drop in separation efficiency. In this study, experimental and computational fluid dynamics simulation results exhibit that the introduction of an apex cone at the dust outlet could avoid the risk of separation efficiency drop but lead to a continuous reducing of the pressure drop. Generally, the optimal cyclone height should be closely related to the natural vortex length. While, when the vortex end contracts into the separation space in the cyclone with an exceeded height, severe back-mixing of particles always occurs, which will result in the decrease of separation efficiency. Herein, it is found that when an apex cone is installed at the dust outlet, the vortex end can be grasped by the cone so as to weaken the back-mixing of particles.Meanwhile, the introduction of this apex cone can enhance the secondary separation to capture the back-mixed particles again so as to protect the efficiency. In addition, it is found that the enhanced secondary separation could come from either the stagnant current of axial velocity in the center or the improved tangential velocity of inner vortex whereas the forcibly extending the length of vortex to exceed its natural length will not significantly increase efficiency.
基金Project (No. 50277034) supported by the National Natural ScienceFoundation of China
文摘In this paper,two new concepts—“main out-of-step mode” and “minor out-of-step mode”—are proposed for power system reliability analysis. Large-scale power system studies found that out-of-step generator groups may have characteristics of the main out-of-step mode and the minor out-of-step mode. The generator groups with main out-of-step modes can determine the out-of-step interface of the large-scale power system,while generators with the minor out-of-step modes cannot play such a role. Therefore,the method of capturing the out-of-step interface by seeking the lowest voltage point(the out-of-step center) can only group the generators with the main out-of-step modes,and may fail to combine the generators with the minor out-of-step modes into proper coherent generator groups. Thus,it is necessary in engineering applications to equip the generators that are likely to have the characteristics of the minor out-of-step modes with separation devices based on off-line simulation studies in order to reduce the risk of further accidents caused by these generators after system separation.
文摘In a Zippe-type 3-pole gas centrifuge, feed gas is introduced through a sonic nozzle into the rarefied region in the rotor. Introduction of the nonrotating feed gas will slow the whirl flow and introduce a secondary recirculating flow in the meridian plane. The effects of feed gas on the output of a gas centrifuge are investigated. The non-linear. axisymmetric N-S equations are used to calculate the secondary flow induced by the feed gas. Three types of numerical schemes. an implicit scheme similar to the Beam-Warming scheme. an implicit unfactorized scheme and an improved Newton-Raphson scheme are used. The Cohen separation theory with axial variation is used forcalculating the isotope concentration. Optimization of the output is achieved by automatic variation of the weighting factors for a number of linear flow solutions which can be superimposed. A Rome type centrifuge is analyzed as an example. Results show the recirculating flow caused by the feed gas. especially the acceleration loss. has an important effect on the output of a gas centrifuge.