Stabilizing zinc anode using zeolite imidazole framework functionalized separator for durable aqueous zinc-ion batteries

Aqueous zinc-ion batteries(AZIBs) hold great promise as a viable alternative to lithium-ion batteries owing to their high energy density and environmental friendliness.However,AZIBs are consistently plagued by the formation of zinc dendrites and concurrent side reactions,which significantly diminish their overall service life,In this study,the glass fiber separator(GF) is modified using zeolite imidazole salt framework-8(ZIF-8),enabling the development of efficient AZIBs.ZIF-8,which is abundant in nitrogen content,efficiently regulates the desolvation of [Zn(H_(2)O)_(6)]^(2+) to inhibit hydrogen production.Moreover,it possesses abundant nanochannels that facilitate the uniform deposition of Zn~(2+) via a localized action,thereby hindering the formation of dendrites.The insulating properties of ZIF-8 help prevent Zn^(2+) and water from trapping electron reduction at the layer surface,which reduces corrosion of the zinc anode.Consequently,ZIF-8-GF achieves the even transport of Zn^(2+) and regulates the homogeneous deposition along the Zn(002) crystal surface,thus significantly enhancing the electrochemical performance of the AZIBs,In particular,the Zn|Zn symmetric cell with the ZIF-8-GF separator delivers a stable cycle life at0.5 mA cm^(-2) of 2300 h.The Zn|ZIF-8-GF|MnO_(2) cell exhibits reduced voltage polarization while maintaining a capacity retention rate(93.4%) after 1200 cycles at 1.2 A g^(-1) The unique design of the modified diaphragm provides a new approach to realizing high-performance AZIBs.

Amphoteric Supramolecular Nanofiber Separator for High-Performance Sodium-Ion Batteries

The separator is an essential component of sodium-ion batteries(SIBs)to determine their electrochemical performances.However,the separator with high mechanical strength,good electrolyte wettability and excellent electrochemical performance remains an open challenge.Herein,a new separator consisting of amphoteric nanofibers with abundant functional groups was fabricated through supramolecular assembly of natural polymers for SIB.The uniform nanoporous structure,remarkable mechanical properties and abundant functional groups(e.g.-COOH,-NH_(2)and-OH)endow the separator with lower dissolution activation energy and higher ion migration numbers.These metrics enable the separator to lower the barrier for desolvation of Na^(+),accelerate the migration of Na^(+),and generate more stable solid electrolyte interphase(SEI)and cathode electrolyte interphase(CEI).The battery assembled with the amphoteric nanofiber separator shows higher specific capacity and better stability than that assembled with glass fiber(GF)separator.

Converting an O-vacancy-rich oxide into a multifunctional separator modifier for long-lifespan lithium metal batteries

The lithium metal anode is hailed as the desired "holy grail" for the forthcoming generation of highenergy-density batteries,given its astounding theoretical capacity and low potential.Nonetheless,the formation and growth of dendrites seriously compromise battery life and safety.Herein,an yttriastabilized bismuth oxide(YSB) layer is fabricated on the polypropylene(PP) separator,where YSB reacts with Li anode in-situ in the cell to form a multi-component composite interlayer consisting of Li_(3)Bi,Li_(2)O,and Y_(2)O_(3).The interlayer can function not only as a redistributor to regulate Li^(+) distribution but also as an anion adsorber to increase the Li^(+) transference number from 0.37 to 0.79 for suppressing dendrite nucleation and growth.Consequently,compared with the cell with a baseline separator,those with modified separators exhibit prolonged lifespan in both Li/Li symmetrical cells and Li/Cu half-cells.Notably,the full cells coupled with ultrahigh-loading LiFePO_(4) display an excellent cycling performance of 1700 cycles with a high capacity retention of ~80% at 1 C,exhibiting great potential for practical applications.This work provides a feasible and effective new strategy for separator modification towards building a much-anticipated dendrite-free Li anode and realizing long-lifespan lithium metal batteries.

S-doped mesoporous graphene modified separator for high performance lithium-sulfur batteries

Due to their low cost,environmental friendliness and high energy density,the lithium-sulfur batteries(LSB)have been regarded as a promising alternative for the next generation of rechargeable battery systems.However,the practical application of LSB is seriously hampered by its short cycle life and high self-charge owing to the apparent shuttle effect of soluble lithium polysulfides.Using MgSO_(4)@MgO composite as both template and dopant,template-guided S-doped mesoporous graphene(SMG)is prepared via the fluidized-bed chemical vapor deposition method.As the polypropylene(PP)modifier,SMG with high specific surface area,abundant mesoporous structures and moderate S doping content offers a wealth of physical and chemical adsorptive sites and reduced interfacial contact resistance,thereby restraining the serious shuttle effects of lithium polysulfides.Consequently,the LSB configured with mesoporous graphene(MG)as S host material and SMG as a separator modifier exhibits an enhanced electrochemical performance with a high average capacity of 955.64 mA h g^(-1) at 1C and a small capacity decay rate of 0.109%per cycle.Additionally,the density functional theory(DFT)calculation models have been rationally constructed and demonstrated that the doped S atoms in SMG possess higher binding energy to lithium polysulfides than that in MG,indicating that the SMG/PP separator can effectively capture soluble lithium polysulfides via chemical binding forces.This work would provide valuable insight into developing a versatile carbon-based separator modifier for LSB.

Rational design on separators and liquid electrolytes for safer lithium-ion batteries

As the energy density of lithium-ion batteries (LIBs) continues to increase,their safety has become a great concern for further practical large-scale applications.One of the ultimate solution of the safety issue is to develop intrinsically safe battery components,where the battery separators and liquid electrolytes are critical for the battery thermal runaway process.In this review,we summarize recent progress in the rational materials design on battery separators and liquid electrolyte towards the goal of improving the safety of LIBs.Also,some strategies for further improving safety of LIBs are also briefly outlooked.

Ultra-lightweight Ti3C2Tx MXene modified separator for Li–S batteries:Thickness regulation enabled polysulfide inhibition and lithium ion transportation

The practical application of lithium–sulfur(Li–S)batteries is limited by the easy dissolution of polysulfides in the electrolyte,resulting in the lithium polysulfide(LPS)shuttle effect.Several two-dimensional(2D)materials with abundant active binding sites and high surface-to-volume ratios have been developed to prepare functional separators that suppress the diffusion of polysulfides.However,the influence of modified layer thickness on Li+transport has not been considered.Herein,we synthesized individual and multilayered 2D Ti3C2Tx MXene nanosheets and used them to fabricate a series of Ti3C2Tx-PP modified separators.The separators had mass loadings ranging from 0.16 to 0.016 mg cm-2,which is the lowest value reported for 2D materials to the best of our knowledge.The corresponding reductions in thickness ranged from 1.2μm to 100 nm.LPS shuttling was effectively suppressed,even at the lowest mass loading of 0.016 mg cm-2.Suppression was due to the strong interaction between LPS intermediates and Ti atoms and hydroxyl functional groups on the separator surface.The lithium-ion diffusion coefficient increased with the reduction of Ti3C2Tx layers on the separator.Superior cycling stability and rate performance were attained when the separator with a Ti3C2Tx-PP mass loading of 0.016 mg cm-2 was incorporated into a Li–S battery.Carbon nanotubes(CNTs)were introduced into the separators to further improve the electrical and Li+ionic conductivity in the cross-plane direction of the 2D Ti3C2Txlayers.With the ultralightweight Ti3C2Tx/CNTs modified PP separator,the cell maintained a capacity of 640 m Ah g-1after 200cycles at 1C with a capacity decay of only 0.079%per cycle.

A polyethylene microsphere-coated separator with rapid thermal shutdown function for lithium-ion batteries

Thermal runaway is the main factor contributing to the unsafe behaviors of lithium-ion batteries(LIBs)in practical applications.The application of separators for the thermal shutdown has been proven as an effective approach to protecting LIBs from thermal runaway.In this work,we developed a thermal shutdown separator by coating a thin layer of low-density polyethylene microspheres(PM)onto a commercial porous polypropylene(PP)membrane and investigated the thermal response behaviors of the as-prepared PM/PP separator in LIBs.The structural and thermal analysis results revealed that the coated PM layer had a porous structure,which facilitated the occurrence of normal charge-discharge reactions at ambient temperature,although it could melt completely and fuse together within very short time periods:3 s at 110℃and 1 s at 120℃,to block off the pores of the PP substrate,thereby cutting off the ion transportation between the electrodes and interrupting the battery reaction.Consequently,the PM/PP separator exhibits very similar electrochemical performance to that of a conventional separator at ambient temperature.However,it performs a rapid thermal shutdown at an elevated temperature of^110℃,thus controlling the temperature rise and maintaining the cell in a safe status.Due to its synthetic simplicity and low cost,this separator shows promise for possible application in building safe LIBs.

Polyimide separators for rechargeable batteries

Separators are indispensable components of modern electrochemical energy storage devices such as lithium-ion batteries(LIBs).They perform the critical function of physically separating the electrodes to prevent short-circuits while permitting the ions to pass through.While conventional separators using polypropylene(PP) and polyethylene(PE) are prone to shrinkage and melting at relatively high temperatures(150℃ or above) causing short circuits and thermal runaway,separators made of thermally stable polyimides(PIs) are electrochemically stable and resistant to high temperatures,and possess good mechanical strength-making them a promising solution to the safety concerns of LIBs.In this review,the research progress on PI separators for use in LIBs is summarized with a special focus on molecular design and microstructural control.In view of the significant progress in advanced chemistries beyond LIBs,recent advances in PI-based membranes for applications in lithium-sulfur,lithium-metal,and solid-state batteries are also reviewed.Finally,practical issues are also discussed along with their prospects.

Metal-Organic Frameworks Functionalized Separators for Robust Aqueous Zinc-Ion Batteries

Aqueous zinc-ion batteries(AZIBs)are one of the promising energy storage systems,which consist of electrode materials,electrolyte,and separator.The first two have been significantly received ample development,while the prominent role of the separators in manipulating the stability of the electrode has not attracted sufficient attention.In this work,a separator(UiO-66-GF)modified by Zr-based metal organic framework for robust AZIBs is proposed.UiO-66-GF effectively enhances the transport ability of charge carriers and demonstrates preferential orientation of(002)crystal plane,which is favorable for corrosion resistance and dendrite-free zinc deposition.Consequently,Zn|UiO-66-GF-2.2|Zn cells exhibit highly reversible plating/stripping behavior with long cycle life over 1650 h at 2.0 mA cm^(−2),and Zn|UiO-66-GF-2.2|MnO_(2) cells show excellent long-term stability with capacity retention of 85%after 1000 cycles.The reasonable design and application of multifunctional metal organic frameworks modified separators provide useful guidance for constructing durable AZIBs.

Comparative study of different membranes as separators for rechargeable lithium-ion batteries

Membranes of polypropylene （PP）, PP coated with nano-A1203, PP electrospun with polyvinylidene fluoride- hexafluoropropylene （PVdF-HFP）, and trilayer laminates of polypropylene-polyethylene-polypropylene （PP/PE/PP） were comparatively studied. Their physical properties were characterized by means of thermal shrinkage test, liquid electrolyte uptake, and field emission scanning electron microscopy （FESEM）. Results show that, for the different membranes as PP, PP coated with nanowA1203, PP electrospun with PVdF-HFP, and PP/PE/PP, the thermal shrinkages are 14%, 6%, 12.6%, and 13.3%, while the liquid electrolyte uptakes are 110%, 150%, 217%, and 129%, respectively. In addition, the effects on the performance of lithium-ion batteries （LiFePO4 and LiNil/3Col/3Mn1/302 as the cathode material） were investigated by AC impedance and galvanostatic charge/discharge test. It is found that PP coated with A1203 and PP electrospun with PVdF-HFP can effectively increase the wettability between the cathode material and liquid electrolyte, and therefore reduce the charge transfer resistance, which improves the capacity retention and battery performance.

Surface modification of polyolefin separators for lithium ion batteries to reduce thermal shrinkage without thickness increase

Surface chemical modification of polyolefin separators for lithium ion batteries is attempted to reduce the thermal shrinkage, which is im- portant for the battery energy density. In this study, we grafted organic/inorganic hybrid crosslinked networks on the separators, simply by grafting polymerization and condensation reaction. The considerable silicon-oxygen crosslinked heat-resistance networks are responsible for the reduced thermal shrinkage. The strong chemical bonds between networks and separators promise enough mechanical support even at high temperature. The shrinkage at 150 ℃ for 30 min in the mechanical direction was 38.6% and 4.6% for the pristine and present graft-modified separators, respectively. Meanwhile, the grafting organic-inorganic hybrid crosslink networks mainly occupied part of void in the internal pores of the separators, so the thicknesses of the graft-modified separators were similar with the pristine one. The half cells prepared with the modified separators exhibited almost identical electrochemical properties to those with the commercial separators, thus proving that, in order to enhance the thermal stability of lithium ion battery, this kind of grafting-modified separators may be a better alternative to conventional silica nanoparticle layers-coated polyolefin separators.

Separator coatings as efficient physical and chemical hosts of polysulfides for high-sulfur-loaded rechargeable lithium–sulfur batteries

Lithium-sulfur batteries(LSBs)are promising alternative energy storage devices to the commercial lithium-ion batteries.However,the LSBs have several limitations including the low electronic conductivity of sulfur(5×10^-30S cm^-1),associated lithium polysulfides(PSs),and their migration from the cathode to the anode.In this study,a separator coated with a Ketjen black(KB)/Nafion composite was used in an LSB with a sulfur loading up to 7.88 mg cm^-2to mitigate the PS migration.A minimum specific capacity(Cs)loss of 0.06%was obtained at 0.2 C-rate at a high sulfur loading of 4.39 mg cm^-2.Furthermore,an initial areal capacity up to 6.70 mAh cm^-2 was obtained at a sulfur loading of 7.88 mg cm^-2.The low Cs loss and high areal capacity associated with the high sulfur loading are attributed to the large surface area of the KB and sulfonate group(SO3^-)of Nafion,respectively,which could physically and chemically trap the PSs.

Safer Lithium-Ion Batteries from the Separator Aspect:Development and Future Perspectives

With the rapid development of lithium-ion batteries(LIBs),safety problems are the great obstacles that restrict large-scale applications of LIBs,especially for the high-energy-density electric vehicle industry.Developing component materials(e.g.,cathode,anode,electrolyte,and separator)with high thermal stability and intrinsic safety is the ultimate solution to improve the safety of LIBs.Separators are crucial components that do not directly participate in electrochemical reactions during charging/discharging processes,but play a vital role in determining the electrochemical performance and safety of LIBs.In this review,the recent advances on traditional separators modified with ceramic materials and multifunctional separators ranging from the prevention of the thermal runaway to the flame retardant are summarized.The component–structure–performance relationship of separators and their effect on the comprehensive performance of LIBs are discussed in detail.Furthermore,the research challenges and future directions toward the advancement in separators for high-safety LIBs are also proposed.

Cellulose nanofiber separator for suppressing shuttle effect and Li dendrite formation in lithium-sulfur batteries

Lithium-sulfur battery(LSB) has high energy density but is limited by the polysulfides shuttle and dendrite growth during cycling. Herein, a free-standing cellulose nanofiber(CNF) separator is designed and fabricated in isopropanol/water suspension through vacuum filtration progress. CNFs with abundant polar oxygen-containing functional groups can chemically immobilize the polysulfides, and suppress the formation of the dendrites by controlling the surface morphology of the SEI on lithium metal in LSB. The isopropanol content in a suspension can fine-tune the pore structure of the membrane to achieve optimal electrochemical performance. The prepared separator displays integrated advantages of an ultrathin thickness(19 μm), lightweight(0.87 mg cm^(-2)), extremely high porosity(98.05%), and decent electrolyte affinity. As a result, the discharge capacity of the LSB with CNF separator at the first and 100 th cycle is 1.4 and 1.3 times that of PP separator, respectively. Our research provides an environmentalfriendly and facile strategy for the preparation of multifunctional separators for LSBs.

Radiation graft of acrylamide onto polyethylene separators for lithium-ion batteries

To improve the affinity between separators and electrolyte in lithium-ion battery,microporous polyethylene(PE) separator was grafted of polyacrylamide(PAAm) by radiation.Chemical structure of the PAAmgrafted PE separators(denoted as PE-g-PAAm) was characterized by Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy.Properties of the pristine PE and PE-g-PAAm were tested by scanning electron microscope,liquid electrolyte uptake and lithium-ion conductivity.Electrochemical performances of the grafted PE separators(up to 0.76 × 10^(-3) S/cm of ionic conductivity at room temperature) were much better than pristine PE,and performance of the battery with the grafted separator behaved better than with the virgin PE separator,under the same condition(assembled in Ar-filled glove box).

Recent advances in interlayer and separator engineering for lithium-sulfur batteries

Lithium-sulfur(Li-S)batteries have great potential in next-generation energy storage due to its high theoretical specific capacity and energy density.However,there are several challenges to the practical application of Li-S batteries including the growth of lithium dendrites and the shuttle effect of polysulfide.Introducing interlayeres(freestanding or coated on the separator)is an effective approach to reduce these obstacles and improve the electrochemical performance of Li-S batteries.In this review,we briefly summarize the interlayer materials and structures modified on both cathodic and anodic sides including(ⅰ)carbon-based materials,(ⅱ)polymers,(ⅲ)inorganic metal compounds,(iv)metal-organic frameworks,as well as(v)the novel separators in recent years.We also systematically address the fabrication processes,assembling methods,and functions of interlayers for enhancing the performance of Li-S batteries.Furthermore,the prospects and outlooks of the future development of advanced interlayers and separators are also presented.

A thermoresponsive composite separator loaded with paraffin@SiO_(2) microparticles for safe and stable lithium batteries

Lithium-ion batteries (LIBs)-related accidents have been reported for years and safety issues are stumbling blocks for the practical applications of lithium metal batteries (LMBs) with higher energy density. More effective strategies to shut down the battery at the early stage of thermal runaway with less side effects on the electrochemical performance are greatly desired. In this work, the core–shell structural paraffin@SiO_(2) microparticles were synthesized by in situ emulsion interfacial hydrolysis and polycondensation and the paraffin@SiO_(2)-loaded separator (PSS) was prepared by a facile filtration method. The introduction of hydrophilic silica shells in paraffin@SiO_(2) enhanced the wettability of carbonate electrolyte with the composite separator and improved the processability of soft paraffin. As a result, when used in LMBs at room temperature, the cell with PSS inside had a more uniform deposition of lithium, a much lower overpotential and a more stable electrochemical performance than the cell with the blank separator or the conventional pure paraffin-loaded separator inside. More significantly, when a heating stimulation (i.e. 115 ℃) was subjected to the cell with PSS inside, the paraffin in the core of paraffin@SiO_(2) could be released, blocking the gaps between particles and the pores in the separator and efficiently stopping the transportation of Li+ between two electrodes, resulting in the thermally-induced shutdown of the cell below the melting temperature of PE (~135 ℃) in the Celgard2325 separator. The core–shell structure of paraffin@SiO_(2) enables the maintaining of each component’s benefits while avoiding each one’s drawbacks by elaborating microstructural design. Therefore, the conventional dilemma between the electrochemcial performance and safety of LMBs could be solved in the future.

A phase inversion based sponge-like polysulfonamide/SiO_2 composite separator for high performance lithium-ion batteries

In this work,a sponge-like polysulfonamide(PSA)/SiO_2 composite membrane is unprecedentedly prepared by the phase inversion method,and successfully demonstrated as a novel separator of lithium-ion batteries(LIBs).Compared to the commercial polypropylene(PP) separator,the sponge-like PSA/SiO_2 composite possesses better physical and electrochemical properties,such as higher porosity,ionic conductivity,thermal stability and flame retarding ability.The LiCoO_2/Li half-cells using the sponge-like composite separator demonstrate superior rate capability and cyclability over those using the commercial PP separator.Moreover,the sponge-like composite separator can ensure the normal operation of LiCoO_2/Li half-cell at an extremely high temperature of 90 °C,while the commercial PP separator cannot.All these encouraging results suggest that this phase inversion based sponge-like PSA/SiO_2 composite separator is really a promising separator for high performance LIBs.

Simple electrode assembly engineering:Toward a multifunctional lead-acid battery

Electrochemical energy storage is a promising technology for the integration of renewable energy.Lead-acid battery is perhaps among the most successful commercialized systems ever since thanks to its excellent cost-effectiveness and safety records.Despite of 165 years of development,the low energy density as well as the coupled power and energy density scaling restrain its wider application in real life.To address this challenge,we optimized the configuration of conventional Pb-acid battery to integrate two gas diffusion electrodes.The novel device can work as a Pb-air battery using ambient air,showing a peak power density of 183 mW cm^(−2),which was comparable with other state-of-the-art metal-O_(2)batteries.It can also behave as a fuel cell,simultaneously converting H_(2)and air into electricity with a peak power density of 75 mW cm^(−2).Importantly,this device showed little performance degradation after 35 h of the longevity test.Our work shows the exciting potential of lead battery technology and demonstrates the importance of battery architecture optimization toward improved energy storage capacity.

Effects of Catalysis and Separator Functionalization on High-Energy Lithium–Sulfur Batteries:A Complete Review

Lithium–sulfur(Li-S)batteries have the advantages of high theoretical specific capacity(1675 mAh g^(−1)),rich sulfur resources,low production cost,and friendly environment,which makes it one of the most promising next-generation rechargeable energy storage devices.However,the“shuttle effect”of polysulfide results in the passivation of metal lithium anode,the decrease of battery capacity and coulombic efficiency,and the deterioration of cycle stability.To realize the commercialization of Li-S batteries,its serious“shuttle effect”needs to be suppress.The commercial separators are ineffective to suppress this effect because of its large pore size.Therefore,it is an effective strategy to modify the separator surface and introduce functional modified layer.In addition to the blocking strategy,the catalysis of polysulfide conversion reaction is also an important factor hindering the migration of polysulfides.In this review,the principles of separator modification,functionalization,and catalysis in Li-S batteries are reviewed.Furthermore,the research trend of separator functionalization and polysulfide catalysis in the future is prospected.