Research on Co-simulation with ADAMS and MATLAB for Servo Tracking System Mounted with a Small Arm

Research on a servo tracking system mounted with a small arm for robot fighting platform based on multi-body system dynamics and intelligent control theory is presented.A multi-body dynamic model which can accurately express dynamic performances of the system is built in ADAMS.In addition,an intelligent PID control model is built with MATLAB/Simulink,and the two models are integrated and co-simulated by the interface of ADAMS/Controls.Simulation experiments indicate that co-simulation technique used for design of the servo tracking system mounted with a small arm can effectively improve its design efficiency,and can also provide theoretical bases for the motion control and performance improvement of the servo tracking system mounted with a small arm.

Parameterized design of nonlinear feedback controllers for servo positioning systems

To achieve fast, smooth and accurate set point tracking in servo positioning systems, a parameterized design of nonlinear feedback controllers is presented, based on a so-called composite nonlinear feedback （CNF） control technique. The controller designed here consists of a linear feedback part and a nonlinear part. The linear part is responsible for stability and fast response of the closed-loop system. The nonlinear part serves to increase the damping ratio of closed-loop poles as the controlled output approaches the target reference. The CNF control brings together the good points of both the small and the large damping ratio cases, by continuously scheduling the damping ratio of the dominant closed-loop poles and thus has the capability for superior transient performance, i.e. a fast output response with low overshoot. In the presence of constant disturbances, an integral action is included so as to remove the static bias. An explicitly parameterized controller is derived for servo positioning systems characterized by second-order model. Practical application in a micro hard disk drive servo system is then presented, together with some discussion of the rationale and characteristics of such design. Simulation and experimental results demonstrate the effectiveness of this control design methodology.

SPATIAL TRAJECTORY PREDICTION OF VISUAL SERVOING

Target tracking is one typical application of visual servoing technology. It is still a difficult task to track high speed target with current visual servo system. The improvement of visual servoing scheme is strongly required. A position-based visual servo parallel system is presented for tracking target with high speed. A local Frenet frame is assigned to the sampling point of spatial trajectory. Position estimation is formed by the differential features of intrinsic geometry, and orientation estimation is formed by homogenous transformation. The time spent for searching and processing can be greatly reduced by shifting the window according to features location prediction. The simulation results have demonstrated the ability of the system to track spatial moving object.