To implement the multi-way phase shifting maintaining the compact size and simplicity in structure,the uniform reference line concept was proposed for the differential phase shifter.However,the performance in bandwidt...To implement the multi-way phase shifting maintaining the compact size and simplicity in structure,the uniform reference line concept was proposed for the differential phase shifter.However,the performance in bandwidth and phase range deteriorates with the additional requirements considered.To solve this problem,a quarter wavelength coupled line section loaded with open/short stubs is proposed as the basic element to implement the main line and also reference line.According to the theoretical analysis on this basic element,the loading stubs can be used to control the phase shift and also the phase slope of the basic element without affecting the amplitude property.With the predetermined parameters of the uniform reference line,only two parameters are required for the implementation of different differential phase shifts.This demonstrates the high simplicity of the proposed structure.For demonstration,an eight-way differential phase shifter operating at 3.5 GHz was implemented using the vertically installed planar structure.The prototype was further fabricated and measured.Good agreement between simulation and measurement can be observed.The implemented phase shifter can provide a wide range of phase shifting values from 45°to 315°with reference to the uniform reference line over a relative bandwidth of 62.3%.展开更多
A novel MOS-only voltage reference is presented,which is based on the threshold voltage difference between p-type and n-type MOSFETs. Its precision is improved by the cancellation of the process variation. The referen...A novel MOS-only voltage reference is presented,which is based on the threshold voltage difference between p-type and n-type MOSFETs. Its precision is improved by the cancellation of the process variation. The reference has been successfully implemented in a Chartered 0.35μm CMOS process. The occupied chip area is 0. 022mm^2. Measurements indicate that without trimming, the average output voltage error is 6mV at room temperature compared with the simulation result. The temperature coefficient is 180ppm/℃ in the worst case in the temperature range of 0 to 100℃ ,and the line regulation is ± 1.1%. The reference is applied in an adaptive power MOSFET driver.展开更多
An on-chip voltage reference with a wide supply voltage range is required by some applications,especially that of power management （PM） controller chips applied to telecommunication, automotive, lighting equipment, ...An on-chip voltage reference with a wide supply voltage range is required by some applications,especially that of power management （PM） controller chips applied to telecommunication, automotive, lighting equipment, etc., when high power supply voltage is needed. Accordingly,a new bandgap reference with a wide supply voltage range is proposed. Due to the improved structure,it features a high power supply rejection ratio （PSRR） and high temperature stability. In addition, an auxiliary micro-power reference is introduced to support the sleep mode of the PM chip and reduce its standby power consumption. The auxiliary reference provides bias currents in normal mode and a 1.28V reference voltage in sleep mode to replace the main reference and save power. Simulation results show that the reference provides a reference volt- age of 1.27V,which has a 3.5mV drift over the temperature range from -20 to 120~C and 56t^V deviation over a supply voltage range from 3 to 40V. The PSRR is higher than 100dB for frequency below 10kHz. The circuit was completed in 1.5tzm BCD （Bipolar-CMOS-DMOS） technology. The experimental results show that all main expectations are achieved.展开更多
通信网络是输电线路在线监测系统的重要组成部分,关系到监测数据的完整性和安全性。由于现行通信网络在实际监测中的数据通信效果并不理想,吞吐量较低且丢包率较高,通信网络性能存在一定缺陷。为解决这一问题,文章提出基于5G的输电线路...通信网络是输电线路在线监测系统的重要组成部分,关系到监测数据的完整性和安全性。由于现行通信网络在实际监测中的数据通信效果并不理想,吞吐量较低且丢包率较高,通信网络性能存在一定缺陷。为解决这一问题,文章提出基于5G的输电线路在线监测通信网络设计。利用5G技术来设计输电线路在线监测的通信网络模型和信道,同时基于开放式系统互连(Open System Interconnect,OSI)参考模型来设计通信网络协议,从而完成基于5G的输电线路在线监测通信网络的整体设计。经实验验证,所设计的通信网络吞吐性能良好,丢包率在1%以下,输电线路在线监测通信效果良好。展开更多
Based on the characteristics of line structured light sensor, a speedy method for the calibration was established. With the coplanar reference target, the spacial pose between camera and optical plane can be calibrate...Based on the characteristics of line structured light sensor, a speedy method for the calibration was established. With the coplanar reference target, the spacial pose between camera and optical plane can be calibrated by using of the camera’s projective center and the light’s information in the camera’s image surface. Without striction to the movement of the coplanar reference target and assistant adjustment equipment, this calibration method can be implemented. This method has been used and decreased the cost of calibration equipment, simplified the calibration procedure, improved calibration efficiency. Using experiment, the sensor can attain relative accuracy about 0.5%, which indicates the rationality and effectivity of this method.展开更多
基金The work described in this paper was supported by the National Natural Science Foundation of China(No.62071503).
文摘To implement the multi-way phase shifting maintaining the compact size and simplicity in structure,the uniform reference line concept was proposed for the differential phase shifter.However,the performance in bandwidth and phase range deteriorates with the additional requirements considered.To solve this problem,a quarter wavelength coupled line section loaded with open/short stubs is proposed as the basic element to implement the main line and also reference line.According to the theoretical analysis on this basic element,the loading stubs can be used to control the phase shift and also the phase slope of the basic element without affecting the amplitude property.With the predetermined parameters of the uniform reference line,only two parameters are required for the implementation of different differential phase shifts.This demonstrates the high simplicity of the proposed structure.For demonstration,an eight-way differential phase shifter operating at 3.5 GHz was implemented using the vertically installed planar structure.The prototype was further fabricated and measured.Good agreement between simulation and measurement can be observed.The implemented phase shifter can provide a wide range of phase shifting values from 45°to 315°with reference to the uniform reference line over a relative bandwidth of 62.3%.
文摘A novel MOS-only voltage reference is presented,which is based on the threshold voltage difference between p-type and n-type MOSFETs. Its precision is improved by the cancellation of the process variation. The reference has been successfully implemented in a Chartered 0.35μm CMOS process. The occupied chip area is 0. 022mm^2. Measurements indicate that without trimming, the average output voltage error is 6mV at room temperature compared with the simulation result. The temperature coefficient is 180ppm/℃ in the worst case in the temperature range of 0 to 100℃ ,and the line regulation is ± 1.1%. The reference is applied in an adaptive power MOSFET driver.
文摘An on-chip voltage reference with a wide supply voltage range is required by some applications,especially that of power management （PM） controller chips applied to telecommunication, automotive, lighting equipment, etc., when high power supply voltage is needed. Accordingly,a new bandgap reference with a wide supply voltage range is proposed. Due to the improved structure,it features a high power supply rejection ratio （PSRR） and high temperature stability. In addition, an auxiliary micro-power reference is introduced to support the sleep mode of the PM chip and reduce its standby power consumption. The auxiliary reference provides bias currents in normal mode and a 1.28V reference voltage in sleep mode to replace the main reference and save power. Simulation results show that the reference provides a reference volt- age of 1.27V,which has a 3.5mV drift over the temperature range from -20 to 120~C and 56t^V deviation over a supply voltage range from 3 to 40V. The PSRR is higher than 100dB for frequency below 10kHz. The circuit was completed in 1.5tzm BCD （Bipolar-CMOS-DMOS） technology. The experimental results show that all main expectations are achieved.
文摘通信网络是输电线路在线监测系统的重要组成部分,关系到监测数据的完整性和安全性。由于现行通信网络在实际监测中的数据通信效果并不理想,吞吐量较低且丢包率较高,通信网络性能存在一定缺陷。为解决这一问题,文章提出基于5G的输电线路在线监测通信网络设计。利用5G技术来设计输电线路在线监测的通信网络模型和信道,同时基于开放式系统互连(Open System Interconnect,OSI)参考模型来设计通信网络协议,从而完成基于5G的输电线路在线监测通信网络的整体设计。经实验验证,所设计的通信网络吞吐性能良好,丢包率在1%以下,输电线路在线监测通信效果良好。
文摘Based on the characteristics of line structured light sensor, a speedy method for the calibration was established. With the coplanar reference target, the spacial pose between camera and optical plane can be calibrated by using of the camera’s projective center and the light’s information in the camera’s image surface. Without striction to the movement of the coplanar reference target and assistant adjustment equipment, this calibration method can be implemented. This method has been used and decreased the cost of calibration equipment, simplified the calibration procedure, improved calibration efficiency. Using experiment, the sensor can attain relative accuracy about 0.5%, which indicates the rationality and effectivity of this method.
