This paper investigates the related strength properties of 3D solid orthogonal panel fabrics under the condition of low strain, then analyses the response of these fabrics to low tensile loads, as well as presents how...This paper investigates the related strength properties of 3D solid orthogonal panel fabrics under the condition of low strain, then analyses the response of these fabrics to low tensile loads, as well as presents how it is possible to deduce the tensile properties of 3D solid orthogonal panel fabrics from the known properties of their constituent yarns and the fabric structural geometry while fabrics suffer from low strain (less than 10%). The experiments indicate that the relationship between stress and strain for 3D solid orthogonal panel fabrics is parabolic, and the relationship between fabric strain and yarn strain is linear. In addition, yarn strain is much less than fabric strain.展开更多
The woven fabric can be defined as orthogonal elastomer if the extension force that puts on the fabric is very small. Based on the precondition, the apparent elasticity constants of a woven fabric were analyzed theore...The woven fabric can be defined as orthogonal elastomer if the extension force that puts on the fabric is very small. Based on the precondition, the apparent elasticity constants of a woven fabric were analyzed theoretically in the paper. The bias angle (which is between weft yarns and extension direction ) affects apparent elasticity modulus and elasticity coefficient of the fabric in the extension direction. And the experiment describes fluxes of elasticity constants going with the bias angle of the fabric.展开更多
Nowadays,more and more natural or functional fibers are being investigated due to their utilization in thermal underwear.Kapok fiber is one of the natural cellulosic fibers whose source is the kapok plant. It has holl...Nowadays,more and more natural or functional fibers are being investigated due to their utilization in thermal underwear.Kapok fiber is one of the natural cellulosic fibers whose source is the kapok plant. It has hollow body and sealed tail,which exhibits desirable features required for functional textiles of this nature. In this study,cotton / kapok( 80 /20 by mass) blended yarn with two types of yarn size 18. 5 and 14. 8 tex,respectively are knitted into plain stitches. The fabrics are undergone with an optimal preparation plan according to orthogonal design. Then,after dyeing and softening,fabric properties including thermal and water-vapour resistances, wicking property, pilling behaviour, and surface morphology,are tested and scrutinized for their candidacy for thermal underwear. The results showed that cotton / kapok blended fabrics have good thermal resistance which is significantly higher than those of cotton / modal blended fabrics,and the same water vapour resistance compared with cotton / modal blended fabrics which are normally used as underwear. Cotton / modal blended knitted fabrics has better pilling grade than cotton / kapok blended fabrics. Meanwhile, the cotton / kapok blends fabrics have good wicking property. Collectively,it was concluded that cotton / kapok blended fabric was appropriate for thermal underwear. However,the main limitation of these fabrics is their pilling properties.展开更多
Five parameters of fabric structure are selected to study the relationship between fabric structure and fabric air permeability by orthogonal test . The influencing rule and influencing order of these factors on air p...Five parameters of fabric structure are selected to study the relationship between fabric structure and fabric air permeability by orthogonal test . The influencing rule and influencing order of these factors on air permeability are obtained.展开更多
Based on SIMA, the Al-Si alloy semi-solid billets were successfully fabricated by means of strain inducement and isothermal treatment for AlSi9Mg poured in the range of near-liquidus. Through orthogonal test, the effe...Based on SIMA, the Al-Si alloy semi-solid billets were successfully fabricated by means of strain inducement and isothermal treatment for AlSi9Mg poured in the range of near-liquidus. Through orthogonal test, the effects of combination action of near-liquidus casting, strain inducement and isothermal treatment on the morphology of primaryα-Al phase of AlSi9Mg close to eutectic point were investigated, and the optimal match relation between the processing parameters of solidification, deformation parameters of strain inducement, processing parameters of isothermal treatment and microstructure parameters of semi-solid alloy was established. The results indicate that compared with the single near-liquidus casting or SIMA, the microstructure of primaryα-Al phase in AlSi9Mg alloy prepared by compound fabrication process is more homogeneous, with more globular and finer particles, which has average grain size of 40-50 urn and shape factor of greater than 0.75. After holding at 605℃for 30-40 min under a certain cooling rate, increased deformation volume in SIMA benefits the refinement of the grain and the improvement of the morphology for primary phase.展开更多
文摘This paper investigates the related strength properties of 3D solid orthogonal panel fabrics under the condition of low strain, then analyses the response of these fabrics to low tensile loads, as well as presents how it is possible to deduce the tensile properties of 3D solid orthogonal panel fabrics from the known properties of their constituent yarns and the fabric structural geometry while fabrics suffer from low strain (less than 10%). The experiments indicate that the relationship between stress and strain for 3D solid orthogonal panel fabrics is parabolic, and the relationship between fabric strain and yarn strain is linear. In addition, yarn strain is much less than fabric strain.
文摘The woven fabric can be defined as orthogonal elastomer if the extension force that puts on the fabric is very small. Based on the precondition, the apparent elasticity constants of a woven fabric were analyzed theoretically in the paper. The bias angle (which is between weft yarns and extension direction ) affects apparent elasticity modulus and elasticity coefficient of the fabric in the extension direction. And the experiment describes fluxes of elasticity constants going with the bias angle of the fabric.
基金Technical Standards for the Development of Kinitted Jinlong Underw ear Factory of Guangdong Province,China(No.HX201303000008)
文摘Nowadays,more and more natural or functional fibers are being investigated due to their utilization in thermal underwear.Kapok fiber is one of the natural cellulosic fibers whose source is the kapok plant. It has hollow body and sealed tail,which exhibits desirable features required for functional textiles of this nature. In this study,cotton / kapok( 80 /20 by mass) blended yarn with two types of yarn size 18. 5 and 14. 8 tex,respectively are knitted into plain stitches. The fabrics are undergone with an optimal preparation plan according to orthogonal design. Then,after dyeing and softening,fabric properties including thermal and water-vapour resistances, wicking property, pilling behaviour, and surface morphology,are tested and scrutinized for their candidacy for thermal underwear. The results showed that cotton / kapok blended fabrics have good thermal resistance which is significantly higher than those of cotton / modal blended fabrics,and the same water vapour resistance compared with cotton / modal blended fabrics which are normally used as underwear. Cotton / modal blended knitted fabrics has better pilling grade than cotton / kapok blended fabrics. Meanwhile, the cotton / kapok blends fabrics have good wicking property. Collectively,it was concluded that cotton / kapok blended fabric was appropriate for thermal underwear. However,the main limitation of these fabrics is their pilling properties.
文摘Five parameters of fabric structure are selected to study the relationship between fabric structure and fabric air permeability by orthogonal test . The influencing rule and influencing order of these factors on air permeability are obtained.
基金Project(04044058) supported by the Excellent Youths Science and Technology Foundation of Anhui, China
文摘Based on SIMA, the Al-Si alloy semi-solid billets were successfully fabricated by means of strain inducement and isothermal treatment for AlSi9Mg poured in the range of near-liquidus. Through orthogonal test, the effects of combination action of near-liquidus casting, strain inducement and isothermal treatment on the morphology of primaryα-Al phase of AlSi9Mg close to eutectic point were investigated, and the optimal match relation between the processing parameters of solidification, deformation parameters of strain inducement, processing parameters of isothermal treatment and microstructure parameters of semi-solid alloy was established. The results indicate that compared with the single near-liquidus casting or SIMA, the microstructure of primaryα-Al phase in AlSi9Mg alloy prepared by compound fabrication process is more homogeneous, with more globular and finer particles, which has average grain size of 40-50 urn and shape factor of greater than 0.75. After holding at 605℃for 30-40 min under a certain cooling rate, increased deformation volume in SIMA benefits the refinement of the grain and the improvement of the morphology for primary phase.
