Deep coal seams show low permeability,low elastic modulus,high Poisson’s ratio,strong plasticity,high fracture initiation pressure,difficulty in fracture extension,and difficulty in proppants addition.We proposed the...Deep coal seams show low permeability,low elastic modulus,high Poisson’s ratio,strong plasticity,high fracture initiation pressure,difficulty in fracture extension,and difficulty in proppants addition.We proposed the concept of large-scale stimulation by fracture network,balanced propagation and effective support of fracture network in fracturing design and developed the extreme massive hydraulic fracturing technique for deep coalbed methane(CBM)horizontal wells.This technique involves massive injection with high pumping rate+high-intensity proppant injection+perforation with equal apertures and limited flow+temporary plugging and diverting fractures+slick water with integrated variable viscosity+graded proppants with multiple sizes.The technique was applied in the pioneering test of a multi-stage fracturing horizontal well in deep CBM of Linxing Block,eastern margin of the Ordos Basin.The injection flow rate is 18 m^(3)/min,proppant intensity is 2.1 m^(3)/m,and fracturing fluid intensity is 16.5 m^(3)/m.After fracturing,a complex fracture network was formed,with an average fracture length of 205 m.The stimulated reservoir volume was 1987×10^(4)m^(3),and the peak gas production rate reached 6.0×10^(4)m^(3)/d,which achieved efficient development of deep CBM.展开更多
To achieve the goals of carbon peaking and carbon neutrality under the backgrounds of poor resource endowments, weak theoretical basis and other factors, the development of the coalbed methane industry of China faces ...To achieve the goals of carbon peaking and carbon neutrality under the backgrounds of poor resource endowments, weak theoretical basis and other factors, the development of the coalbed methane industry of China faces many bottlenecks and challenges. This paper systematically analyzes the coalbed methane resources, key technologies and progress, exploration effect and production performance in China and abroad. The main problems are summarized as low exploration degree, low technical adaptability, low return on investment and small development scale. This study suggests that the coalbed methane industry in China should follow the “two-step”(short-term and long-term) development strategy. The short-term action before 2030, can be divided into two stages:(1) From the present to 2025, to achieve new breakthroughs in theory and technology, and accomplish the target of annual production of 10 billion cubic meters;(2) From 2025 to 2030, to form the technologies suitable for most geological conditions, further expand the industry scale, and achieve an annual output of 30 billion cubic meters, improving the proportion of coalbed methane in the total natural gas production. The long-term action after 2030 is to gradually realize an annual production of 100 billion cubic meters. The strategic countermeasure to achieve the above goals is to adhere to “technology+management dual wheel drive”, realize the synchronous progress of technology and management, and promote the high-quality development of the coalbed methane industry. Technically, the efforts will focus on fine and effective development of coalbed methane in the medium to shallow layers of mature fields, effective development of coalbed methane in new fields, extensive and beneficial development of deep coalbed methane, three-dimensional comingled development of coalbed methane, applying new technologies such as coalbed methane displacement by carbon dioxide, microwave heating and stimulation technology, ultrasonic stimulation, high-temperature heat injection stimulation, rock breaking by high-energy laser. In terms of management, the efforts will focus on coordinative innovation of resource, technology, talent, policy and investment, with technological innovation as the core, to realize an all-round and integrated management and promote the development of coalbed methane industry at a high level.展开更多
Perforation and fracturing are typically associated with the development of coalbed methane wells.As the cement sheath is prone to failure during this process,in this work,the effects of the casing pressure,elastic mo...Perforation and fracturing are typically associated with the development of coalbed methane wells.As the cement sheath is prone to failure during this process,in this work,the effects of the casing pressure,elastic modulus of the cement,elastic modulus of the formation,and casing eccentricity on the resulting stresses are analyzed in the frame of a finite element method.Subsequently,sensitivity response curves of the cement sheath stress are plotted by normalizing all factors.The results show that the maximum circumferential stress and Mises stress of the cement sheath increase with the casing internal pressure,elastic modulus of the cement and casing eccentricity.As the elastic modulus of the formation increases,the maximum circumferential stress of the cement sheath decreases,and its maximum Mises stress increases slightly.The cement sheath undergoes tensile failure during coalbed methane fracturing.The stress sensitivity of the cement sheath to the influential parameters is in the following order:casing internal pressure>elastic modulus of cement sheath>casing eccentricity>elastic modulus of formation.展开更多
From the perspective of geological zone selection for coalbed methane(CBM) development, the evaluation parameters(covering geological conditions and production conditions) of geological sweetspot for CBM development a...From the perspective of geological zone selection for coalbed methane(CBM) development, the evaluation parameters(covering geological conditions and production conditions) of geological sweetspot for CBM development are determined, and the evaluation index system of geological sweetspot for CBM development is established. On this basis, the fuzzy pattern recognition(FPR) model of geological sweetspot for CBM development is built. The model is applied to evaluate four units of No.3 Coal Seam in the Fanzhuang Block, southern Qinshui Basin, China. The evaluation results are consistent with the actual development effect and the existing research results, which verifies the rationality and reliability of the FPR model. The research shows that the proposed FPR model of geological sweetspot for CBM development does not involve parameter weighting which leads to uncertainties in the results of the conventional models such as analytic hierarchy process and multi-level fuzzy synthesis judgment, and features a simple computation without the construction of multi-level judgment matrix. The FPR model provides reliable results to support the efficient development of CBM.展开更多
Coalbed methane (CBM) is an important type of unconventional gas. Commercial development of CBM in America has been very successful since the 1980s. The CBM industry in Australia and Canada has developed rapidly dur...Coalbed methane (CBM) is an important type of unconventional gas. Commercial development of CBM in America has been very successful since the 1980s. The CBM industry in Australia and Canada has developed rapidly during the last decade. Commercial development of CBM in China started in the 1990s, and has made great progress. The geological theory of CBM in China has achieved great advancement in genesis, occurrence and accumulation. On the aspect of CBM genesis, five CBM genetic types (primary biogenic gas, secondary biogenic gas, thermal degradation gas, pyrolysis gas and mixed gas) are identified by studying the geochemical characteristics of CBM, and a tracing indicator system is established. The discovery of secondary biogenic gas in medium-high rank coal reservoirs has widened the potential of CBM resources. On the aspect of CBM occurrence, the gas adsorption regulation under combined action of temperature and pressure is revealed by conducting adsorption experiments of different coal ranks under varying temperature and pressure conditions. Besides, by applying the adsorption potential theory in CBM research, the adsorption model under combined action of temperature and pressure is established. The new model can predict CBM resources accurately, and overcome the limitation of the traditional Langmuir model which uses just a single factor to describe the adsorption characteristics of deep buried coal. On the aspect of CBM accumulation, it is proposed that there are three evolutionary stages during CBM accumulation, including gas generation and adsorption, unsaturated gas adsorption, gas desorption-diffusion and preservation. Controlled by tectonic evolution, hydrodynamics and sealing conditions, CBM tends to be regionally enriched in synclines. Advances in geological theory of CBM in China can not only improve understanding of natural gas, but also provide new ideas for further exploration of CBM.展开更多
Coalbed methane has been explored in many basins worldwide for 30 years, and has been developed commercially in some of the basins. Many researchers have described the characteristics of coalbed methane geology and te...Coalbed methane has been explored in many basins worldwide for 30 years, and has been developed commercially in some of the basins. Many researchers have described the characteristics of coalbed methane geology and technology systematically. According to these investigations, a coalbed methane reservoir can be defined: 'a coal seam that contains some coalbed methane and is isolated from other fluid units is called a coalbed methane reservoir'. On the basis of anatomization, analysis, and comparison of the typical coalbed methane reservoirs, coalbed methane reservoirs can be divided into two classes: the hydrodynamic sealing coalbed methane reservoirs and the self-sealing coalbed methane reservoirs. The former can be further divided into two sub-classes: the hydrodynamic capping coalbed methane reservoirs, which can be divided into five types and the hydrodynamic driving coalbed methane reservoirs, which can be divided into three types. The latter can be divided into three types. Currently, hydrodynamic sealing reservoirs are the main target for coalbed methane exploration and development; self-sealing reservoirs are unsuitable for coalbed methane exploration and development, but they are closely related with coal mine gas hazards. Finally, a model for hydrodynamic sealing coalbed methane reservoirs is established.展开更多
Sequestration of CO2 in deep and unmineable coal seams is one of the attractive alternatives to reduce its atmospheric concentration. Injection of CO2 in coal seams may help in enhancing the recovery of coalbed methan...Sequestration of CO2 in deep and unmineable coal seams is one of the attractive alternatives to reduce its atmospheric concentration. Injection of CO2 in coal seams may help in enhancing the recovery of coalbed methane. An experimental study has been carried out using coal samples from three different coal seams, to evaluate the enhanced gas recovery and sequestration potential of these coals. The coals were first saturated with methane and then by depressurization some of the adsorbed methane was desorbed. After partial desorption, CO2 was injected into the coals and subsequently they were depressurized again. Desorption of methane after the injections was studied, to investigate the ability of CO2 to displace and enhance the recovery of methane from the coals. The coals exhibited varying behavior of adsorption of CO2 and release of methane. For one coal, the release of methane was enhanced by injection of CO2, suggesting preferential adsorption of CO2 and desorption of methane. For the other two coals, CO2 injection did not produce incremental methane initially, as there was initial resistance to methane release. However with continued CO2 injection, most of the remaining methane was produced. The study suggested that preferential sorption behavior of coal and enhanced gas recovery pattern could not be generalized for all coals.展开更多
The coalbed methane (CBM) resources in North China amounts up to 60% of total resources in China. North China is the most important CBM accumulation area in China. The coal beds of the Upper Paleozoic Taiyuan and Shan...The coalbed methane (CBM) resources in North China amounts up to 60% of total resources in China. North China is the most important CBM accumulation area in China. The coal beds of the Upper Paleozoic Taiyuan and Shanxi formations have a stable distribution. The coal reservoir of target areas such as Jincheng, Yanquan-Shouyang, Hancheng, Liulin, etc. have good CBM-bearing characteristics, high permeability and appropriate reservoir pressure, and these areas are the preferred target areas of CBM developing in China. The coal reservoirs of Wupu, Sanjiaobei, Lu'an, Xinmi, Anyang-Hebi, Jiaozuo, Xinggong and Huainan also have as good CBM-bearing characteristics, but the physical properties of coal reservoirs vary observably. So, further work should be taken to search for districts with high pressure, high permeability and good CBM-bearing characteristics. Crustal stresses have severe influence on the permeability of coal reservoirs in North China. From west to east, the crustal stress gradient increases, while the coal reservoirs permeability decreases.展开更多
Coalbed methane reservoir (CBMR) evaluation is important for choosing the prospective target area for coalbed methane exploration and production. This study aims at identifying the characteristic parameters and meth...Coalbed methane reservoir (CBMR) evaluation is important for choosing the prospective target area for coalbed methane exploration and production. This study aims at identifying the characteristic parameters and methods to evaluate CBMR. Based on the geological surveys, laboratory measurements and field works, a four-level analytic hierarchy process (AHP) model for CBMR evaluation is proposed. In this model, different weights are prioritized and assigned on the basis of three main criteria (including reservoir physical property, storage capacity and geological characteristics), 15 sub-criteria, and 18 technical alternatives; the later of which are discussed in detail. The model was applied to evaluate the CBMR of the Permo-Carboniferous coals in the Qinshui Basin, North China. This GIS-based fuzzy AHP comprehensive model can be used for the evaluation of CBMR of medium-high rank (mean maximum vitrinite reflectance 〉0.5 %) coal districts in China.展开更多
Effects of particle size on CH4 and CO2adsorption and desorption characteristics of coals are investigated at 308 K and pressures up to 5.0 MPa.The gas adsorption and desorption isotherms of coals with particle sizes ...Effects of particle size on CH4 and CO2adsorption and desorption characteristics of coals are investigated at 308 K and pressures up to 5.0 MPa.The gas adsorption and desorption isotherms of coals with particle sizes ranging from 250 μm to 840 μm are measured via the volumetric method,and the Langmuir model is used to analyse the experimental results.Coal particle size is found to have an obvious effect on the coal pore structure.With the decrease of coal particle size in the process of grinding,the pore accessibility of the coal,including the specific surface area and pore volume,increases.Hence,coal with smaller particle size has higher specific surface area and higher pore volume.The ability of adsorption was highly related to the pore structure of coal,and coal particle size has a significant influence on coal adsorption/desorption characteristics,including adsorption capacity and desorption hysteresis for CH4 and CO2,i.e.,coal with a smaller particle size achieves higher adsorption capacity,while the sample with a larger particle size has lower adsorption capacity.Further,coal with larger particle size is also found to have relatively large desorption hysteresis.In addition,dynamic adsorption performances of the samples are carried out at 298 K and at pressures of 0.1 MPa and 0.5 MPa,respectively,and the results indicate that with the increase of particle size,the difference between CO2 and CH4adsorption capacities of the samples decreases.展开更多
Fracture propagation mechanisms in coalbed methane(CBM) reservoirs are very complex due to the development of the internal cleat system. In this paper, the characteristics of initiation and propagation of hydraulic fr...Fracture propagation mechanisms in coalbed methane(CBM) reservoirs are very complex due to the development of the internal cleat system. In this paper, the characteristics of initiation and propagation of hydraulic fractures in coal specimens at different angles between the face cleat and the maximum horizontal principal stress were investigated with hydraulic fracturing tests. The results indicate that the interactions between the hydraulic fractures and the cleat system have a major effect on fracture networks. "Step-like’’ fractures were formed in most experiments due to the existence of discontinuous butt cleats. The hydraulic fractures were more likely to divert or propagate along the butt cleat with an increase in the angles and a decrease in the horizontal principal stress difference. An increase in the injection rate and a decrease in the fracturing fluid viscosity were more conducive to fracture networks. In addition, the influence on fracture propagation of the residual coal fines in the wellbore was also studied. The existence of coal fines was an obstacle in fracturing, and no effective connection can be formed between fractures. The experimental investigation revealed the fracture propagation mechanisms and can provide guidance for hydraulic fracturing design of CBM reservoirs.展开更多
The pool-forming mechanism of coalbed methane has its own characteristics.In this paper, based on studies on the typical coal-bearing basins in China,it is pointed out that the reservoir formation of medium- to high-r...The pool-forming mechanism of coalbed methane has its own characteristics.In this paper, based on studies on the typical coal-bearing basins in China,it is pointed out that the reservoir formation of medium- to high-rank coalbed methane has experienced three critical stages:the coalbed methane generation and adsorption stage,the coalbed adsorption capacity enhancement stage,and the coalbed methane desorption-diffusion and preservation stage.The regional tectonic evolution, hydrodynamic conditions and sealing conditions play important roles in the stage of coalbed methane desorption-diffusion and preservation.Medium- to high-rank coalbed methane has three types of enrichment models,that is,the most favorable,the relatively favorable,and the unfavorable enrichment models.展开更多
Because forecasting a development program during the target selection phase of exploration for coalbed methane (CBM) is impossible, the conventional method that relies on a conceptual (or detailed) development pro...Because forecasting a development program during the target selection phase of exploration for coalbed methane (CBM) is impossible, the conventional method that relies on a conceptual (or detailed) development pro- gram cannot be used during the economic evaluation of CBM resources. Hence, this study focuses on establishing an economic evaluation model based on the characteristics of the target selection phase. The discounted cashflow method is applied to the construction of the model with the assumption that there is a uniform distribution of produc- tion wells. The computational error generated by the assumption is corrected by introducing a correction factor based on the production profile of single CBM wells. The case study demonstrates that the blocks lacking economic value can be screened out, and the most advantageous targets can be found by computing the resource values in the best- and worst-case scenarios. This technique can help to reduce wasted investments and improve the quality of decision-making in selecting targets for exploration.展开更多
A new method based on the combination of a neural network and a genetic algorithm was proposed to rank the order of exploitation priority of coalbed methane reservoirs. The neural network was used to acquire the weigh...A new method based on the combination of a neural network and a genetic algorithm was proposed to rank the order of exploitation priority of coalbed methane reservoirs. The neural network was used to acquire the weights of reservoir parameters through sample training and genetic algorithm was used to optimize the initial connection weights of nerve cells in case the neural network fell into a local minimum. Additionally, subordinate functions of each parameter were established to normalize the actual values of parameters of coalbed methane reservoirs in the range between zero and unity. Eventually, evaluation values of all coalbed methane reservoirs could be obtained by using the comprehensive evaluation method, which is the basis to rank the coalbed methane reservoirs in the order of exploitation priority. The greater the evaluation value, the higher the exploitation priority. The ranking method was verified in this paper by ten exploited coalbed methane reservoirs in China. The evaluation results are in agreement with the actual exploitation cases. The method can ensure the truthfulness and credibility of the weights of parameters and avoid the subjectivity caused by experts. Furthermore, the probability of falling into local minima is reduced, because genetic the algorithm is used to optimize the neural network system.展开更多
Based on engineering tests in the Huainan coal mining area,we studied alternative well location to improve the performance of surface wells for remote pressure relief of coalbed methane in mining areas.The key factors...Based on engineering tests in the Huainan coal mining area,we studied alternative well location to improve the performance of surface wells for remote pressure relief of coalbed methane in mining areas.The key factors,affecting location and well gas production were analyzed by simulation tests for similar material.The exploitation results indicate that wells located in various positions on panels could achieve relatively better gas production in regions with thin Cenozoic layers,low mining heights and slow rate of longwall advancement,but their periods of gas production lasted less than 230 days,as opposed to wells in regions with thick Cenozoic layers,greater mining heights and fast rates of longwall advancement.Wells near panel margins achieved relatively better gas production and lasted longer than centerline wells.The rules of development of mining fractures in strata over panels control gas production of surface wells.Mining fractures located in areas determined by lines of compaction and the effect of mining are well developed and can be maintained for long periods of time.Placing the well at the end of panels and on the updip return airway side of panels,determined by lines of compaction and the effect of mining,would result in surface wells for remote pressure relief CBM obtaining their longest gas production periods and highest cumulative gas production.展开更多
A method is proposed to predict the flowing bottomhole pressures (FBHPs) for two-phase coalbed methane (CBM) wells. The mathematical models for both gas column pressure and two-phase fluid column pressure were dev...A method is proposed to predict the flowing bottomhole pressures (FBHPs) for two-phase coalbed methane (CBM) wells. The mathematical models for both gas column pressure and two-phase fluid column pressure were developed based on the well liquid flow equation. FBHPs during the production were predicted by considering the effect of entrained liquid on gravitational gradients. Comparison of calculated BHPs by Cullender-Smith and proposed method was also studied. The results show that the proposed algorithm gives the desired accuracy of calculating BHPs in the low- productivity and low-pressure CBM wells. FBHP is resulted from the combined action of wellhead pressure, gas column pressure and fluid column pressure. Variation of kinetic energy term, compressibility and friction factors with depth increments and liquid holdup with velocity should be considered to simulate the real BHPs adequately. BHP is a function of depth of each column segment. The small errors of less than 1.5% between the calculated and measured values are obtained with each segment within 25 m. Adjusting BHPs can effectively increase production pressure drop, which is beneficial to CBM desorption and enhances reservoir productivity. The increment of pressure drop from 5.37 MPa2 to 8.66 MPa2 leads to an increase of CBM production from 3270 m3/d to 6700 m3/d and is attributed to a decrease in BHP from 2.25 MPa to 1.33 MPa.展开更多
Inspired by successful development of shale gas in USA and influenced by hydrocarbon resources shortage currently, China has strengthened shale gas research and accelerated its exploration process. In order to enrich ...Inspired by successful development of shale gas in USA and influenced by hydrocarbon resources shortage currently, China has strengthened shale gas research and accelerated its exploration process. In order to enrich coalbed methane (CBM) and shale gas geological theory and promote their development process, this paper compared shale gas with CBM in accumulation, distribution, reservoir and production. It expatiated on the background and significance of the combined research and development, and analyzed the geological foundation and future prospects. Our investigation demonstrated that there are many sets of coal-bearing strata in Shanxi formation of Permian system in Ordos in North China, Longtan formation of Upper Permian and Xujiahe formation of Upper Triassic in Southern Yangtze region, Xishanyao formation of Middle Jurassic in Turpan-Hami Basin and Junggar Basin in Northwest China, and Shahezi formation of Cretaceous in Songliao Basin in northeast China. In these regions, shales which are interbeded with coal seams have the characters of big thickness, continuous distribution, high content of organic matter, good parent material and high maturity, accord with the basic geological conditions to format shale gas and CBM reservoir and composite gas reservoir, thus form appropriate regions and layers to carry out joint research and exploration with good prospects for development.展开更多
A deeper understanding of the mechanisms by which geological factors(depositional environment and tectonic evolution) control the occurrence of coalbed methane(CBM) is important for the utilization of CBM resources vi...A deeper understanding of the mechanisms by which geological factors(depositional environment and tectonic evolution) control the occurrence of coalbed methane(CBM) is important for the utilization of CBM resources via surface-drilled wells and the elimination of coal-methane outbursts, the latter of which is a key issue for coal mine safety. Based on drill core data, high-pressure isothermal adsorption experiments, scanning electron microscopy experiments, mercury intrusion porosimetry, and X-ray diffraction experiments, the impact of the depositional environment and tectonic evolution on CBM occurrence of the II-1 coal seam of the Shanxi Formation in West Henan was analyzed. Results showed that the depositional environment led to the epigenetic erosion of tidal flat coal-accumulating structures by shallow-delta distributary channel strata. This resulted in the replacement of the original mudstonesandy mudstone coal seam immediate roof with fine-to-medium grained sandstones, reducing methane storage capacity. Epigenetic erosion by the depositional environment also increased coal body ash content(from 6.9% to 21.4%) and mineral content, filling the cleat system and reducing porosity, reducing methane storage capacity. The maximum methane adsorption capacity of the coal body reduced from35.7 cm3/g to 30.30 cm3/g, and Langmuir pressure decreased from 1.39 MPa to 0.909 MPa. Hence, the methane adsorption capacity of the coal body decreased while its capacity for methane desorption increased. Owing to the tectonic evolution of West Henan, tectonically deformed coal is common; as it evolves from primary cataclastic coal to granulitic coal, the angle of the diffraction peak increases, d002 decreases, and La, Lc, and Nc increase; these traits are generally consistent with dynamic metamorphism.This is accompanied by increases in the total pore volume and specific surface area of the coal body, further increasing the capacity for methane storage. Increases in micropore volume and specific surface area also increase the ability of the coal body to adsorb methane.展开更多
Objective The production of coal fines is very common in the development of coalbed methane(CBM)in the eastern margin of the Ordos Basin,China.A large amount of produced coal fines seriously affect the productivity ...Objective The production of coal fines is very common in the development of coalbed methane(CBM)in the eastern margin of the Ordos Basin,China.A large amount of produced coal fines seriously affect the productivity of CBM wells(Wei Yingchun et al.,2013).Therefore,the production problems of CBM wells caused by coal fines have attracted extensive attention.展开更多
The China National Administration of Coal Geology accomplished an assessment of coalbed methane resources of China in 1988. The total amount of coalbed methane resources in China is 14336.944 billion m3, occurring in ...The China National Administration of Coal Geology accomplished an assessment of coalbed methane resources of China in 1988. The total amount of coalbed methane resources in China is 14336.944 billion m3, occurring in recoverable coal seams and beneath weathering zones, with coalbed methane content equal to or higher than 4 m3 per ton and buried depths smaller than 2000 m, among which there are 967.51 billion m3 of predicted reserves and 13369.434 billion m3 of future reserves. The resources in coal reservoirs with methane content of more than 8 m3 per ton are 12444.087 billion m3, and those with methane content between 4 to 8 m3 per ton are 1892.856 billion m3. There are 35 districts in which the resources abundance is higher than 150 million m3/km2, 49 districts with the abundance between 50 million and 150 million m3/km2, and 31 districts with the abundance less than 50 million m3/km2. There is 9256.078 billion m3 of methane occurring in coal seams with buried depths less than 1500 m, and 5080.866 billion m3 in coal seams with buried depths between 1500 and 2000 m. There are 28 large-scale districts in which coalbed methane resources are more than 100 billions m3, 28 medium-scale districts with coalbed methane resources between 20 billion and 100 billion m3 and 59 small-scale districts with resources amount less than 20 billion m3. The Jincheng area is one of the most favourable districts for coalbed methane resources in China.展开更多
基金Supported by the National Natural Science Foundation of China Project(52274014)Comprehensive Scientific Research Project of China National Offshore Oil Corporation(KJZH-2023-2303)。
文摘Deep coal seams show low permeability,low elastic modulus,high Poisson’s ratio,strong plasticity,high fracture initiation pressure,difficulty in fracture extension,and difficulty in proppants addition.We proposed the concept of large-scale stimulation by fracture network,balanced propagation and effective support of fracture network in fracturing design and developed the extreme massive hydraulic fracturing technique for deep coalbed methane(CBM)horizontal wells.This technique involves massive injection with high pumping rate+high-intensity proppant injection+perforation with equal apertures and limited flow+temporary plugging and diverting fractures+slick water with integrated variable viscosity+graded proppants with multiple sizes.The technique was applied in the pioneering test of a multi-stage fracturing horizontal well in deep CBM of Linxing Block,eastern margin of the Ordos Basin.The injection flow rate is 18 m^(3)/min,proppant intensity is 2.1 m^(3)/m,and fracturing fluid intensity is 16.5 m^(3)/m.After fracturing,a complex fracture network was formed,with an average fracture length of 205 m.The stimulated reservoir volume was 1987×10^(4)m^(3),and the peak gas production rate reached 6.0×10^(4)m^(3)/d,which achieved efficient development of deep CBM.
基金Supported by the China National Science and Technology Major Project (2016ZX05042)。
文摘To achieve the goals of carbon peaking and carbon neutrality under the backgrounds of poor resource endowments, weak theoretical basis and other factors, the development of the coalbed methane industry of China faces many bottlenecks and challenges. This paper systematically analyzes the coalbed methane resources, key technologies and progress, exploration effect and production performance in China and abroad. The main problems are summarized as low exploration degree, low technical adaptability, low return on investment and small development scale. This study suggests that the coalbed methane industry in China should follow the “two-step”(short-term and long-term) development strategy. The short-term action before 2030, can be divided into two stages:(1) From the present to 2025, to achieve new breakthroughs in theory and technology, and accomplish the target of annual production of 10 billion cubic meters;(2) From 2025 to 2030, to form the technologies suitable for most geological conditions, further expand the industry scale, and achieve an annual output of 30 billion cubic meters, improving the proportion of coalbed methane in the total natural gas production. The long-term action after 2030 is to gradually realize an annual production of 100 billion cubic meters. The strategic countermeasure to achieve the above goals is to adhere to “technology+management dual wheel drive”, realize the synchronous progress of technology and management, and promote the high-quality development of the coalbed methane industry. Technically, the efforts will focus on fine and effective development of coalbed methane in the medium to shallow layers of mature fields, effective development of coalbed methane in new fields, extensive and beneficial development of deep coalbed methane, three-dimensional comingled development of coalbed methane, applying new technologies such as coalbed methane displacement by carbon dioxide, microwave heating and stimulation technology, ultrasonic stimulation, high-temperature heat injection stimulation, rock breaking by high-energy laser. In terms of management, the efforts will focus on coordinative innovation of resource, technology, talent, policy and investment, with technological innovation as the core, to realize an all-round and integrated management and promote the development of coalbed methane industry at a high level.
基金funded by the Provincial Geological Exploration Fund of Guizhou Province(208-9912-JBN-UTS0).
文摘Perforation and fracturing are typically associated with the development of coalbed methane wells.As the cement sheath is prone to failure during this process,in this work,the effects of the casing pressure,elastic modulus of the cement,elastic modulus of the formation,and casing eccentricity on the resulting stresses are analyzed in the frame of a finite element method.Subsequently,sensitivity response curves of the cement sheath stress are plotted by normalizing all factors.The results show that the maximum circumferential stress and Mises stress of the cement sheath increase with the casing internal pressure,elastic modulus of the cement and casing eccentricity.As the elastic modulus of the formation increases,the maximum circumferential stress of the cement sheath decreases,and its maximum Mises stress increases slightly.The cement sheath undergoes tensile failure during coalbed methane fracturing.The stress sensitivity of the cement sheath to the influential parameters is in the following order:casing internal pressure>elastic modulus of cement sheath>casing eccentricity>elastic modulus of formation.
基金Key Project of China National Natural Science Foundation (42230814,52234002)Research Program Foundation of Key Laboratory of Tectonics and Petroleum Resources (China University of Geosciences),Ministry of Education (TPR-2022-17)。
文摘From the perspective of geological zone selection for coalbed methane(CBM) development, the evaluation parameters(covering geological conditions and production conditions) of geological sweetspot for CBM development are determined, and the evaluation index system of geological sweetspot for CBM development is established. On this basis, the fuzzy pattern recognition(FPR) model of geological sweetspot for CBM development is built. The model is applied to evaluate four units of No.3 Coal Seam in the Fanzhuang Block, southern Qinshui Basin, China. The evaluation results are consistent with the actual development effect and the existing research results, which verifies the rationality and reliability of the FPR model. The research shows that the proposed FPR model of geological sweetspot for CBM development does not involve parameter weighting which leads to uncertainties in the results of the conventional models such as analytic hierarchy process and multi-level fuzzy synthesis judgment, and features a simple computation without the construction of multi-level judgment matrix. The FPR model provides reliable results to support the efficient development of CBM.
基金supported by National Basic Research Program of China (2009CB219600), State Key Laboratory of Petroleum Resource and Prospecting, Key Laboratory of Basin Structure and Hydrocarbon Accumulation of CNPC
文摘Coalbed methane (CBM) is an important type of unconventional gas. Commercial development of CBM in America has been very successful since the 1980s. The CBM industry in Australia and Canada has developed rapidly during the last decade. Commercial development of CBM in China started in the 1990s, and has made great progress. The geological theory of CBM in China has achieved great advancement in genesis, occurrence and accumulation. On the aspect of CBM genesis, five CBM genetic types (primary biogenic gas, secondary biogenic gas, thermal degradation gas, pyrolysis gas and mixed gas) are identified by studying the geochemical characteristics of CBM, and a tracing indicator system is established. The discovery of secondary biogenic gas in medium-high rank coal reservoirs has widened the potential of CBM resources. On the aspect of CBM occurrence, the gas adsorption regulation under combined action of temperature and pressure is revealed by conducting adsorption experiments of different coal ranks under varying temperature and pressure conditions. Besides, by applying the adsorption potential theory in CBM research, the adsorption model under combined action of temperature and pressure is established. The new model can predict CBM resources accurately, and overcome the limitation of the traditional Langmuir model which uses just a single factor to describe the adsorption characteristics of deep buried coal. On the aspect of CBM accumulation, it is proposed that there are three evolutionary stages during CBM accumulation, including gas generation and adsorption, unsaturated gas adsorption, gas desorption-diffusion and preservation. Controlled by tectonic evolution, hydrodynamics and sealing conditions, CBM tends to be regionally enriched in synclines. Advances in geological theory of CBM in China can not only improve understanding of natural gas, but also provide new ideas for further exploration of CBM.
基金We wish to thank the Ministry of Science an d Technology of China for its finan cial support of the“Project 973”(No.2002CB211705)the Science and Technology Admi nistration of Henan Province.
文摘Coalbed methane has been explored in many basins worldwide for 30 years, and has been developed commercially in some of the basins. Many researchers have described the characteristics of coalbed methane geology and technology systematically. According to these investigations, a coalbed methane reservoir can be defined: 'a coal seam that contains some coalbed methane and is isolated from other fluid units is called a coalbed methane reservoir'. On the basis of anatomization, analysis, and comparison of the typical coalbed methane reservoirs, coalbed methane reservoirs can be divided into two classes: the hydrodynamic sealing coalbed methane reservoirs and the self-sealing coalbed methane reservoirs. The former can be further divided into two sub-classes: the hydrodynamic capping coalbed methane reservoirs, which can be divided into five types and the hydrodynamic driving coalbed methane reservoirs, which can be divided into three types. The latter can be divided into three types. Currently, hydrodynamic sealing reservoirs are the main target for coalbed methane exploration and development; self-sealing reservoirs are unsuitable for coalbed methane exploration and development, but they are closely related with coal mine gas hazards. Finally, a model for hydrodynamic sealing coalbed methane reservoirs is established.
文摘Sequestration of CO2 in deep and unmineable coal seams is one of the attractive alternatives to reduce its atmospheric concentration. Injection of CO2 in coal seams may help in enhancing the recovery of coalbed methane. An experimental study has been carried out using coal samples from three different coal seams, to evaluate the enhanced gas recovery and sequestration potential of these coals. The coals were first saturated with methane and then by depressurization some of the adsorbed methane was desorbed. After partial desorption, CO2 was injected into the coals and subsequently they were depressurized again. Desorption of methane after the injections was studied, to investigate the ability of CO2 to displace and enhance the recovery of methane from the coals. The coals exhibited varying behavior of adsorption of CO2 and release of methane. For one coal, the release of methane was enhanced by injection of CO2, suggesting preferential adsorption of CO2 and desorption of methane. For the other two coals, CO2 injection did not produce incremental methane initially, as there was initial resistance to methane release. However with continued CO2 injection, most of the remaining methane was produced. The study suggested that preferential sorption behavior of coal and enhanced gas recovery pattern could not be generalized for all coals.
基金These research results are a part of the National Key Foundation Research Development an d Plan ning Program of China(No.2002CB2ll702)National Natural Science Foundation of China(No.40272069)
文摘The coalbed methane (CBM) resources in North China amounts up to 60% of total resources in China. North China is the most important CBM accumulation area in China. The coal beds of the Upper Paleozoic Taiyuan and Shanxi formations have a stable distribution. The coal reservoir of target areas such as Jincheng, Yanquan-Shouyang, Hancheng, Liulin, etc. have good CBM-bearing characteristics, high permeability and appropriate reservoir pressure, and these areas are the preferred target areas of CBM developing in China. The coal reservoirs of Wupu, Sanjiaobei, Lu'an, Xinmi, Anyang-Hebi, Jiaozuo, Xinggong and Huainan also have as good CBM-bearing characteristics, but the physical properties of coal reservoirs vary observably. So, further work should be taken to search for districts with high pressure, high permeability and good CBM-bearing characteristics. Crustal stresses have severe influence on the permeability of coal reservoirs in North China. From west to east, the crustal stress gradient increases, while the coal reservoirs permeability decreases.
基金funded by the National Basic Research Program of China(Grant Nos.2006CB202202,2002CB211702,2009CB219600)National Natural Science Foundation of China(No.40572091)+1 种基金China Geological Survey(Grant Nos.20021010004,1212010534702)PetroChina Innovation Fundation(No.2008D-5006-01-04)
文摘Coalbed methane reservoir (CBMR) evaluation is important for choosing the prospective target area for coalbed methane exploration and production. This study aims at identifying the characteristic parameters and methods to evaluate CBMR. Based on the geological surveys, laboratory measurements and field works, a four-level analytic hierarchy process (AHP) model for CBMR evaluation is proposed. In this model, different weights are prioritized and assigned on the basis of three main criteria (including reservoir physical property, storage capacity and geological characteristics), 15 sub-criteria, and 18 technical alternatives; the later of which are discussed in detail. The model was applied to evaluate the CBMR of the Permo-Carboniferous coals in the Qinshui Basin, North China. This GIS-based fuzzy AHP comprehensive model can be used for the evaluation of CBMR of medium-high rank (mean maximum vitrinite reflectance 〉0.5 %) coal districts in China.
基金Project supported by the National Basic Research Program of China(Grant No.2011CB201202)
文摘Effects of particle size on CH4 and CO2adsorption and desorption characteristics of coals are investigated at 308 K and pressures up to 5.0 MPa.The gas adsorption and desorption isotherms of coals with particle sizes ranging from 250 μm to 840 μm are measured via the volumetric method,and the Langmuir model is used to analyse the experimental results.Coal particle size is found to have an obvious effect on the coal pore structure.With the decrease of coal particle size in the process of grinding,the pore accessibility of the coal,including the specific surface area and pore volume,increases.Hence,coal with smaller particle size has higher specific surface area and higher pore volume.The ability of adsorption was highly related to the pore structure of coal,and coal particle size has a significant influence on coal adsorption/desorption characteristics,including adsorption capacity and desorption hysteresis for CH4 and CO2,i.e.,coal with a smaller particle size achieves higher adsorption capacity,while the sample with a larger particle size has lower adsorption capacity.Further,coal with larger particle size is also found to have relatively large desorption hysteresis.In addition,dynamic adsorption performances of the samples are carried out at 298 K and at pressures of 0.1 MPa and 0.5 MPa,respectively,and the results indicate that with the increase of particle size,the difference between CO2 and CH4adsorption capacities of the samples decreases.
基金funded by the National Science and Technology Major Project of China (2016ZX05046004-003)Northeast Petroleum University Innovation Foundation for Postgraduate (YJSCX2017-010NEPU and YJSCX2017-009NEPU)
文摘Fracture propagation mechanisms in coalbed methane(CBM) reservoirs are very complex due to the development of the internal cleat system. In this paper, the characteristics of initiation and propagation of hydraulic fractures in coal specimens at different angles between the face cleat and the maximum horizontal principal stress were investigated with hydraulic fracturing tests. The results indicate that the interactions between the hydraulic fractures and the cleat system have a major effect on fracture networks. "Step-like’’ fractures were formed in most experiments due to the existence of discontinuous butt cleats. The hydraulic fractures were more likely to divert or propagate along the butt cleat with an increase in the angles and a decrease in the horizontal principal stress difference. An increase in the injection rate and a decrease in the fracturing fluid viscosity were more conducive to fracture networks. In addition, the influence on fracture propagation of the residual coal fines in the wellbore was also studied. The existence of coal fines was an obstacle in fracturing, and no effective connection can be formed between fractures. The experimental investigation revealed the fracture propagation mechanisms and can provide guidance for hydraulic fracturing design of CBM reservoirs.
基金supported by the project of China National 973 Program"Basic Research on Enrichment Mechanism and Improving the Exploitation Efficiency of Coalbed Methane Reservoir"(Grant No. 2009CB219600)
文摘The pool-forming mechanism of coalbed methane has its own characteristics.In this paper, based on studies on the typical coal-bearing basins in China,it is pointed out that the reservoir formation of medium- to high-rank coalbed methane has experienced three critical stages:the coalbed methane generation and adsorption stage,the coalbed adsorption capacity enhancement stage,and the coalbed methane desorption-diffusion and preservation stage.The regional tectonic evolution, hydrodynamic conditions and sealing conditions play important roles in the stage of coalbed methane desorption-diffusion and preservation.Medium- to high-rank coalbed methane has three types of enrichment models,that is,the most favorable,the relatively favorable,and the unfavorable enrichment models.
基金funded by the Beijing Natural Science Foundation (9144033)the National Social Science Fund for Major Projects (11&ZD164)
文摘Because forecasting a development program during the target selection phase of exploration for coalbed methane (CBM) is impossible, the conventional method that relies on a conceptual (or detailed) development pro- gram cannot be used during the economic evaluation of CBM resources. Hence, this study focuses on establishing an economic evaluation model based on the characteristics of the target selection phase. The discounted cashflow method is applied to the construction of the model with the assumption that there is a uniform distribution of produc- tion wells. The computational error generated by the assumption is corrected by introducing a correction factor based on the production profile of single CBM wells. The case study demonstrates that the blocks lacking economic value can be screened out, and the most advantageous targets can be found by computing the resource values in the best- and worst-case scenarios. This technique can help to reduce wasted investments and improve the quality of decision-making in selecting targets for exploration.
基金EU-China Energy and Environment Programme(Europe Aid/120723/D/SV/CN)Research Fund for the Doctoral Program of Higher Education of China(20030425001)
文摘A new method based on the combination of a neural network and a genetic algorithm was proposed to rank the order of exploitation priority of coalbed methane reservoirs. The neural network was used to acquire the weights of reservoir parameters through sample training and genetic algorithm was used to optimize the initial connection weights of nerve cells in case the neural network fell into a local minimum. Additionally, subordinate functions of each parameter were established to normalize the actual values of parameters of coalbed methane reservoirs in the range between zero and unity. Eventually, evaluation values of all coalbed methane reservoirs could be obtained by using the comprehensive evaluation method, which is the basis to rank the coalbed methane reservoirs in the order of exploitation priority. The greater the evaluation value, the higher the exploitation priority. The ranking method was verified in this paper by ten exploited coalbed methane reservoirs in China. The evaluation results are in agreement with the actual exploitation cases. The method can ensure the truthfulness and credibility of the weights of parameters and avoid the subjectivity caused by experts. Furthermore, the probability of falling into local minima is reduced, because genetic the algorithm is used to optimize the neural network system.
基金sponsored by the Hi-tech Research and Development Program of China (No.2007AA06Z220)the Key Science and Technology Program of the Geological Engineering Company of the Huinan Mining Group and the Panyi, Pansan, Guqiao and Dingji mines (No.307014)
文摘Based on engineering tests in the Huainan coal mining area,we studied alternative well location to improve the performance of surface wells for remote pressure relief of coalbed methane in mining areas.The key factors,affecting location and well gas production were analyzed by simulation tests for similar material.The exploitation results indicate that wells located in various positions on panels could achieve relatively better gas production in regions with thin Cenozoic layers,low mining heights and slow rate of longwall advancement,but their periods of gas production lasted less than 230 days,as opposed to wells in regions with thick Cenozoic layers,greater mining heights and fast rates of longwall advancement.Wells near panel margins achieved relatively better gas production and lasted longer than centerline wells.The rules of development of mining fractures in strata over panels control gas production of surface wells.Mining fractures located in areas determined by lines of compaction and the effect of mining are well developed and can be maintained for long periods of time.Placing the well at the end of panels and on the updip return airway side of panels,determined by lines of compaction and the effect of mining,would result in surface wells for remote pressure relief CBM obtaining their longest gas production periods and highest cumulative gas production.
基金part of a key project carried out in 2009–2010financially supported by the National Key Sci-Tech Major Special Item (Grant No. 2009ZX05038)
文摘A method is proposed to predict the flowing bottomhole pressures (FBHPs) for two-phase coalbed methane (CBM) wells. The mathematical models for both gas column pressure and two-phase fluid column pressure were developed based on the well liquid flow equation. FBHPs during the production were predicted by considering the effect of entrained liquid on gravitational gradients. Comparison of calculated BHPs by Cullender-Smith and proposed method was also studied. The results show that the proposed algorithm gives the desired accuracy of calculating BHPs in the low- productivity and low-pressure CBM wells. FBHP is resulted from the combined action of wellhead pressure, gas column pressure and fluid column pressure. Variation of kinetic energy term, compressibility and friction factors with depth increments and liquid holdup with velocity should be considered to simulate the real BHPs adequately. BHP is a function of depth of each column segment. The small errors of less than 1.5% between the calculated and measured values are obtained with each segment within 25 m. Adjusting BHPs can effectively increase production pressure drop, which is beneficial to CBM desorption and enhances reservoir productivity. The increment of pressure drop from 5.37 MPa2 to 8.66 MPa2 leads to an increase of CBM production from 3270 m3/d to 6700 m3/d and is attributed to a decrease in BHP from 2.25 MPa to 1.33 MPa.
文摘Inspired by successful development of shale gas in USA and influenced by hydrocarbon resources shortage currently, China has strengthened shale gas research and accelerated its exploration process. In order to enrich coalbed methane (CBM) and shale gas geological theory and promote their development process, this paper compared shale gas with CBM in accumulation, distribution, reservoir and production. It expatiated on the background and significance of the combined research and development, and analyzed the geological foundation and future prospects. Our investigation demonstrated that there are many sets of coal-bearing strata in Shanxi formation of Permian system in Ordos in North China, Longtan formation of Upper Permian and Xujiahe formation of Upper Triassic in Southern Yangtze region, Xishanyao formation of Middle Jurassic in Turpan-Hami Basin and Junggar Basin in Northwest China, and Shahezi formation of Cretaceous in Songliao Basin in northeast China. In these regions, shales which are interbeded with coal seams have the characters of big thickness, continuous distribution, high content of organic matter, good parent material and high maturity, accord with the basic geological conditions to format shale gas and CBM reservoir and composite gas reservoir, thus form appropriate regions and layers to carry out joint research and exploration with good prospects for development.
文摘A deeper understanding of the mechanisms by which geological factors(depositional environment and tectonic evolution) control the occurrence of coalbed methane(CBM) is important for the utilization of CBM resources via surface-drilled wells and the elimination of coal-methane outbursts, the latter of which is a key issue for coal mine safety. Based on drill core data, high-pressure isothermal adsorption experiments, scanning electron microscopy experiments, mercury intrusion porosimetry, and X-ray diffraction experiments, the impact of the depositional environment and tectonic evolution on CBM occurrence of the II-1 coal seam of the Shanxi Formation in West Henan was analyzed. Results showed that the depositional environment led to the epigenetic erosion of tidal flat coal-accumulating structures by shallow-delta distributary channel strata. This resulted in the replacement of the original mudstonesandy mudstone coal seam immediate roof with fine-to-medium grained sandstones, reducing methane storage capacity. Epigenetic erosion by the depositional environment also increased coal body ash content(from 6.9% to 21.4%) and mineral content, filling the cleat system and reducing porosity, reducing methane storage capacity. The maximum methane adsorption capacity of the coal body reduced from35.7 cm3/g to 30.30 cm3/g, and Langmuir pressure decreased from 1.39 MPa to 0.909 MPa. Hence, the methane adsorption capacity of the coal body decreased while its capacity for methane desorption increased. Owing to the tectonic evolution of West Henan, tectonically deformed coal is common; as it evolves from primary cataclastic coal to granulitic coal, the angle of the diffraction peak increases, d002 decreases, and La, Lc, and Nc increase; these traits are generally consistent with dynamic metamorphism.This is accompanied by increases in the total pore volume and specific surface area of the coal body, further increasing the capacity for methane storage. Increases in micropore volume and specific surface area also increase the ability of the coal body to adsorb methane.
基金financially supported by the National Natural Science Foundation of China(grants No.41402134 and 41272181)
文摘Objective The production of coal fines is very common in the development of coalbed methane(CBM)in the eastern margin of the Ordos Basin,China.A large amount of produced coal fines seriously affect the productivity of CBM wells(Wei Yingchun et al.,2013).Therefore,the production problems of CBM wells caused by coal fines have attracted extensive attention.
文摘The China National Administration of Coal Geology accomplished an assessment of coalbed methane resources of China in 1988. The total amount of coalbed methane resources in China is 14336.944 billion m3, occurring in recoverable coal seams and beneath weathering zones, with coalbed methane content equal to or higher than 4 m3 per ton and buried depths smaller than 2000 m, among which there are 967.51 billion m3 of predicted reserves and 13369.434 billion m3 of future reserves. The resources in coal reservoirs with methane content of more than 8 m3 per ton are 12444.087 billion m3, and those with methane content between 4 to 8 m3 per ton are 1892.856 billion m3. There are 35 districts in which the resources abundance is higher than 150 million m3/km2, 49 districts with the abundance between 50 million and 150 million m3/km2, and 31 districts with the abundance less than 50 million m3/km2. There is 9256.078 billion m3 of methane occurring in coal seams with buried depths less than 1500 m, and 5080.866 billion m3 in coal seams with buried depths between 1500 and 2000 m. There are 28 large-scale districts in which coalbed methane resources are more than 100 billions m3, 28 medium-scale districts with coalbed methane resources between 20 billion and 100 billion m3 and 59 small-scale districts with resources amount less than 20 billion m3. The Jincheng area is one of the most favourable districts for coalbed methane resources in China.