The linear shaped charge cutting technology is an effective technology for aircraft separation.It can separate invalid components from aircrafts timely to achieve light-weight.Magnesium alloy is the lightest metal mat...The linear shaped charge cutting technology is an effective technology for aircraft separation.It can separate invalid components from aircrafts timely to achieve light-weight.Magnesium alloy is the lightest metal material,and can be used to cast effective light-weight components of an aircraft construction.However,the application study of the linear shaped charge cutting technology on magnesium alloy components is basically blank.In response to the demand for the linear separation of magnesium alloys,the Mg-12Gd-0.5Y-0.4Zn alloy is selected to carry out the target shaped charge cutting test.The effects of the shaped charge line density,cutting thickness,and mechanical properties on the cutting performance of the alloy are studied.The shaped charge cutting mechanism is analyzed through the notch structure.The results show that the linear shaped charge cutting performance is significantly affected by the penetration and the collapse.The higher the linear density is,the stronger the ability of the linear shaped charge cutter is,and the greater the penetration depth is,which is advantageous.However,the target structure will be damaged when it is too large(e.g.,4.5 g·m^(-1)).Within 12 mm,when the cutting thickness of the target increases,the penetration depth increases.The lower the tensile strength is,the greater the penetration depth is,and the more conducive the penetration depth to the shaped charge cutting is.When the elongation(EL)increases to 12%,the collapse of the target is incomplete and the target cannot be separated.When the tensile strength of the Mg-Gd-Y-Zn alloy is less than 350 MPa,the EL is less than 6.5%,the cutting thickness is less than 12 mm,and the linear shaped charge cutting of the magnesium alloy can be achieved stably.展开更多
The bore-center annular shaped charge(BCASC)is a new type of shaped charge which can generate a larger-diameter hole in steel targets than classical shaped charges.In this paper,the influence of three liner materials,...The bore-center annular shaped charge(BCASC)is a new type of shaped charge which can generate a larger-diameter hole in steel targets than classical shaped charges.In this paper,the influence of three liner materials,i.e.molybdenum,nickel and copper,on BCASC formation and penetrating into steel targets was investigated by experiment and numerical simulation.The simulation results were well consistent with the experimental results.This study showed that,at 0.50D standoff distance,the axial velocity of the molybdenum projectile was lower than that of the nickel and copper projectiles.The nickel and copper projectiles had almost the same head velocity.The absolute values of the radial velocity of the molybdenum projectile head was lower than that of the nickel and copper projectiles.However,at 0.75D standoff distance,the absolute values of the radial velocity of the molybdenum projectile head became much greater than that of the nickel and copper projectile heads.The projectile formed by BCASC with the molybdenum liner had the highest penetration depth of 61.5 mm,which was 10.0%and 21.3%higher than that generated by the copper and nickel projectiles.展开更多
The mechanic affection on the blast holewalls is simply analyzed and cracking propaga-tion caused by shaped charge is explained inthis paper. In the rock materials cutting, pri-
基金the National Natural Science Foundation of China(No.U2037601)。
文摘The linear shaped charge cutting technology is an effective technology for aircraft separation.It can separate invalid components from aircrafts timely to achieve light-weight.Magnesium alloy is the lightest metal material,and can be used to cast effective light-weight components of an aircraft construction.However,the application study of the linear shaped charge cutting technology on magnesium alloy components is basically blank.In response to the demand for the linear separation of magnesium alloys,the Mg-12Gd-0.5Y-0.4Zn alloy is selected to carry out the target shaped charge cutting test.The effects of the shaped charge line density,cutting thickness,and mechanical properties on the cutting performance of the alloy are studied.The shaped charge cutting mechanism is analyzed through the notch structure.The results show that the linear shaped charge cutting performance is significantly affected by the penetration and the collapse.The higher the linear density is,the stronger the ability of the linear shaped charge cutter is,and the greater the penetration depth is,which is advantageous.However,the target structure will be damaged when it is too large(e.g.,4.5 g·m^(-1)).Within 12 mm,when the cutting thickness of the target increases,the penetration depth increases.The lower the tensile strength is,the greater the penetration depth is,and the more conducive the penetration depth to the shaped charge cutting is.When the elongation(EL)increases to 12%,the collapse of the target is incomplete and the target cannot be separated.When the tensile strength of the Mg-Gd-Y-Zn alloy is less than 350 MPa,the EL is less than 6.5%,the cutting thickness is less than 12 mm,and the linear shaped charge cutting of the magnesium alloy can be achieved stably.
基金supported by the National Natural Science Foundation of China(No.11732003)Beijing Natural Science Foundation(No.8182050)+1 种基金Science Challenge Project(No.TZ2016001)National Key R&D Program of China(No.2017YFC0804700)
文摘The bore-center annular shaped charge(BCASC)is a new type of shaped charge which can generate a larger-diameter hole in steel targets than classical shaped charges.In this paper,the influence of three liner materials,i.e.molybdenum,nickel and copper,on BCASC formation and penetrating into steel targets was investigated by experiment and numerical simulation.The simulation results were well consistent with the experimental results.This study showed that,at 0.50D standoff distance,the axial velocity of the molybdenum projectile was lower than that of the nickel and copper projectiles.The nickel and copper projectiles had almost the same head velocity.The absolute values of the radial velocity of the molybdenum projectile head was lower than that of the nickel and copper projectiles.However,at 0.75D standoff distance,the absolute values of the radial velocity of the molybdenum projectile head became much greater than that of the nickel and copper projectile heads.The projectile formed by BCASC with the molybdenum liner had the highest penetration depth of 61.5 mm,which was 10.0%and 21.3%higher than that generated by the copper and nickel projectiles.
文摘The mechanic affection on the blast holewalls is simply analyzed and cracking propaga-tion caused by shaped charge is explained inthis paper. In the rock materials cutting, pri-
