Battery Management System with State ofCharge Indicator for Electric Vehicles

Aim To research and develop a battery management system(BMS)with the state of charge(SOC)indicator for electric vehicles (EVs).Methods On the basis of analyzing the electro-chemical characteristics of lead-acid. battery, the state of charge indicator for lead-acid battery was developed by means of an algorithm based on combination of ampere-hour, Peukert's equation and open-voltage method with the compensation of temperature,aging,self- discharging,etc..Results The BMS based on this method can attain an accurate surplus capa- city whose error is less than 5% in static experiments.It is proved by experiments that the BMS is reliable and can give the driver an accurate surplus capacity,precisely monitor the individual battery modules as the same time,even detect and warn the problems early,and so on. Conclusion A BMS can make the energy of the storage batteries used efficiently, develop the batteries cycle life,and increase the driving distance of EVs.

Hybrid Excited Permanent Magnet Machines for Electric and Hybrid Electric Vehicles

This paper reviews various hybrid excited(HE)machines from the perspective of location of PM and DC excitation,series/parallel connection of PM and DC excited magnetic fields,and 2D/3D magnetic fields,respectively.The advantages as well as drawbacks of each category are analyzed.Since an additional control degree,i.e.DC excitation,is introduced in the HE machine,the flux weakening control strategies are more complex.The flux weakening performance as well as efficiency are compared with different control strategies.Then,the potential to mitigate the risk of uncontrolled overvoltage fault at high speed operation is highlighted by controlling the field excitation.Since additional DC coils are usually required for HE machines compared with pure PM excitation,the spatial confliction inevitably results in electromagnetic performance reduction.Finally,the technique to integrate the field and armature windings with open-winding drive circuit is introduced,and novel HE machines without a DC coil are summarized.

Auto-Test on Motor Temperature Rising in Electric Vehicles with Mutual MRAS

A new method to calculate the motor temperature rising in electric vehicle （EV） is proposed based on the stator resistance identification. The measure theory of the motor temperature rising with the stator resistance is discussed at first. An enhanced magnetism motor dynamic math model is built which is the research object. Then the resistance identification system model is built on the mutual model reference adaptive,system （MRAS） theory. The simulation diagram of the mutual MRAS model is constructed and the resistance identification performance is studied in different motor states. Simulation results indicate that the stator resistance identification model with the mutual MRAS is effective. At the same time, the identification of motor temperature rising is possible with the identification of the stator resistance.

A Multi-Objective Coordinated Charging and Discharging Strategy for Electric Vehicles Based on Stackelberg Game

For the negative impact of large-scale electric vehicles (EVs) disorderly charging on the power grid, a multi-objective optimization strategy for coordinated charging and discharging of EVs based on Stackelberg game is proposed. As the leader, the grid company aims to stabilize load fluctuations and formulate a reasonable electricity price strategy to guide EVs to participate in vehicle-to-grid (V2G);As followers, EV users optimize their charging plans based on electricity price information with the objective of reducing costs and obtaining good comfort. This paper uses the MOPSO algorithm to solve the proposed multi-objective Stackelberg problem, and calculates the optimization results under various preferences, which proves the effectiveness of the proposed model and method.

Optimization of Vibration and Noise Performance of Permanent Magnet Synchronous Motor for Electric Vehicles

In the design of the motor used for electric vehicles(EVS),vibration and noise problems are often ignored,which reduce the reliability and service life of the motor.In this paper,an interior permanent magnet synchronous motor(IPMSM)with high power density is taken as an example,and its electromagnetic vibration and noise problem is investigated and optimized.Firstly,the factors that generate the electromagnetic force harmonic of IPMSM are analyzed by theoretical derivation.Furthermore,the mode and electromagnetic harmonic distribution of the motor are calculated and analyzed by establishing the electromagnetic-structure-sound coupling simulation model.Then,by combining finite element method(FEM)with modern optimization algorithm,an electromagnetic vibration and noise performance optimization method is proposed in the electromagnetic design stage of the motor.Finally,an IPMSM is optimized by this method for electromagnetic vibration and noise performance.The results of comparison between before and after optimization prove the feasibility of the method.

Optimization and Performance Comparison of Hairpin?Winding PMSM for Electric Vehicles Under Drive Cycle

Aiming at the problem of large AC copper loss caused by skin effects and proximity effects,and low efficiency at high speed of the hairpin-winding permanent magnet synchronous motor(PMSM)for electric vehicles(EVs),this paper firstly established the electromagnetic analytical model of the hairpin winding to calculate AC resistance.And the finite element model(FEM)of the hairpin-winding driving motor is established to calculate the AC characteristic of the hairpin winding at different speeds and temperatures.Then,combining modified particle swarm optimization(MPSO)and FEM,a 60 k W hairpin-winding PMSM is optimized under driving cycle conditions,and the electromagnetic performance and heat dissipation performance are compared with that of the traditional strand-winding motor.Finally,a prototype is made and an experimental platform is built to test the efficiency Map and temperature rise of the hairpin-winding motor over the whole speed range and verify the accuracy of the proposed optimization design method.The results show that the hairpin-winding PMSM not only has higher slot filling rate,high?efficiency range and power density,but also has better heat dissipation performance,which is suitable for application in the field of electric vehicles.

Flexible predictive power-split control for battery-supercapacitor systems of electric vehicles using IVHS

The utilization of traffic information received from intelligent vehicle highway systems(IVHS) to plan velocity and split output power for multi-source vehicles is currently a research hotspot. However, it is an open issue to plan vehicle velocity and distribute output power between different supply units simultaneously due to the strongly coupling characteristic of the velocity planning and the power distribution. To address this issue, a flexible predictive power-split control strategy based on IVHS is proposed for electric vehicles(EVs) equipped with battery-supercapacitor system(BSS). Unlike hierarchical strategies to plan vehicle velocity and distribute output power separately, a monolayer model predictive control(MPC) method is employed to optimize them online at the same time. Firstly, a flexible velocity planning strategy is designed based on the signal phase and time(SPAT) information received from IVHS and then the Pontryagin’s minimum principle(PMP) is adopted to formulate the optimal control problem of the BSS. Then, the flexible velocity planning strategy and the optimal control problem of BSS are embedded into an MPC framework, which is online solved using the shooting method in a fashion of receding horizon. Simulation results verify that the proposed strategy achieves a superior performance compared with the hierarchical strategy in terms of transportation efficiency, battery capacity loss, energy consumption and computation time.

Reinforcement Learning-Based Electric Vehicles Energy Management Strategy with Battery Thermal Model

The promotion of electric vehicles(EVs)is restricted due to their short cruising range.It is desirable to design an effective energy management strategy to improve their energy efficiency.Most existing work concerning energy management strategies focused on hybrids rather than the EVs.The work focusing on the energy management strategy for EVs mainly uses the traditional optimization strategies,thereby limiting the advantages of energy economy.To this end,a novel energy management strategy that considered the impact of battery thermal effects was proposed with the help of reinforcement learning.The main idea was to first analyze the energy flow path of EVs,further formulize the energy management as an optimization problem,and finally propose an online strategy based on reinforcement learning to obtain the optimal strategy.Additionally,extensive simulation results have demonstrated that our strategy reduces energy consumption by at least 27.4%compared to the existing methods.

Applications of Serial-Parallel Compensated Resonant Topology in Wireless Charger System Used in Electric Vehicles

There are lots of factors that can influence the wireless charging efficiency in practice, such as misalignment and air-gap difference, which can also change all the charging parameters. To figure out the relationship between those facts and system, this paper presents a serial-parallel compensated(SPC) topology for electric vehicle/plug-in hybrid electric vehicle(EV/PHEV) wireless charger and provides all the parameters changing with corresponding curves. An ANSYS model is built to extract the coupling coefficient of coils. When the system is works at constant output power, the scan frequency process can be applied to wireless power transfer(WPT) and get the resonant frequency. In this way, it could determine the best frequency for system to achieve zero voltage switching status and force the system to hit the maximum transmission efficiency. Then frequency tracking control(FTC) is used to obtain the highest system efficiency. In the paper, the designed system is rated at 500 W with 15 cm air-gap, the overall efficiency is 92%. At the end, the paper also gives the consideration on how to improve the system efficiency.

Electric Vehicles Lithium-Polymer Ion Battery Dynamic Behaviour Charging Identification and Modelling Scheme

Lithium-ion batteries are considered the substantial electrical storage element for electric vehicles(EVs). The battery model is the basis of battery monitoring, efficient charging, and safety management. Non-linearmodelling is the key to representing the battery and its dynamic internal parameters and performance. This paperproposes a smart scheme to model the lithium-polymer ion battery while monitoring its present charging currentand terminal voltage at various ambient conditions (temperature and relative humidity). Firstly, the suggestedframework investigated the impact of temperature and relative humidity on the charging process using the constantcurrent-constant voltage (CC-CV) charging protocol. This will be followed by monitoring the battery at thesurrounding operating temperature and relative humidity. Hence, efficient non-linear modelling of the EV batterydynamic behaviour using the Hammerstein-Wiener (H-W) model is implemented. The H-W model is considered ablack box model that can represent the battery without any mathematical equivalent circuit model which reducesthe computation complexity. Finally, the model beholds the boundaries of the charging process, not affecting onthe lifetime of the battery. Several dynamic models are applied and tested experimentally to ensure theeffectiveness of the proposed scheme under various ambient conditions where the temperature is fixed at40°C and the relative humidity (RH) at 35%, 52%, and 70%. The best fit using the H-W model reached 91.83% todescribe the dynamic behaviour of the battery with a maximum percentage of error 0.1 V which is in goodagreement with the literature survey. Besides, the model has been scaled up to represent a real EV and expressedthe significance of the proposed H-W model.

Phases-Controlled Coordinated Charging Method for Electric Vehicles

When private electric vehicles(EVs),which will be the main part of the EVs’cluster in the future,are plugged in power system by single phase power line,can result to three-phase unbalance problem of distribution network.In this work,a phased-controlled coordinated charging method was put forward to solve this problem.Firstly,the impacts of charging load to distribution network was analyzed based on the equivalent circuit;and then an architecture of the control method and its corresponding optimal control model were introduced.The optimal model is a multi-objective optimization model,which includes minimizing load variance of each phase and minimizing the power asymmetrical degree of three-phase load;lastly,three scenarios considering balance and unbalance cases were envisioned to verify the reasonableness of this control method based on IEEE-37 distribution network.Results show that the phased-controlled coordinated charging method can minimize the load variance as well as the negative sequence current.

Optimum Driving System Design for Dual-Motor Pure Electric Vehicles

A pure electric vehicle driven by dual motors is taken as the research object and the driving scheme of the driving motor is improved to increase the transmission efficiency of existing electric vehicles.Based on the architecture of the transmission system,we propose vehicle performance parameters and performance indexes of a pure electric vehicle,a time-sharing driving strategy of dual motors.First,the parameters of the battery,motor,and transmission system are matched.Then,the electric vehicle transmission model is built in Amesim and the control strategy is designed in Simulink.With the optimization goal of improving the vehicle’s dynamic performance and driving range,the optimal parameters are determined through analysis.Finally,the characteristics of the motor are tested on the bench.The results show that the energy-saving potential of the timesharing driven double motor is higher,and the driving mileage of the double motor drive is increased by 4%.

A New Coordinated Fuzzy-PID Controller for Power System Considering Electric Vehicles

With penetration growing of renewable energy sources which integrated into power system have caused problems on grid stability. Electric Vehicles (EV) are one of the renewable energy sources that can bring significant impacts to power system during their charging and discharging operations. This article established a model of single machine infinite bus (SMIB) power system considering EV as a case study of load disturbance for power system oscillation. The objective of this research is to enhance stability and overcome the drawbacks of traditional control algorithms such as power system stabilizer (PSS), PID controller and fuzzy logic controller (FLC). The implementation’s effect of FLC parallel with PID controller (Fuzzy-PID) has been shown in this paper. The speed deviation (?ω) and electrical power (Pe) are the important factors to be taken into consideration without EV (only change in mechanical torque), EV with change in the mechanical torque and sudden plug-in EV. The obtained result by nonlinear simulation using Matlab/Simulink of a SMIB power system with EV has shown the effectiveness of using (Fuzzy-PID) against all disturbances.

Electric Vehicles Analysis inside Electric Mobility Looking for Energy Efficient and Sustainable Metropolis

This paper aims to study and evaluate electric mobility over time, focusing on the development of the electric car. Methodologically, in order to accomplish this intent, the characterization of the electric vehicle (EV) is made based on the variables which determine its performance, such as: assessment of speeds, distance traveled, analysis of facts related to the energy source (electro-chemical accumulators) and analysis of the determining system of electric mobility (the electric engine as a function of power (W) and voltage (V)). This way, to demonstrate the effects of time, this process will be analyzed from the beginning of the 20th century (1930s) to the present (the first decade of the 21st century), methodologically structured in 4 cycles that show the performance of the EV. The results show the existence of vulnerabilities and of electric mobility potential, as well as the nuances of the development of the electric vehicle along the years and along the transformations in what is considered state-of-the-art. Thus, in the case of batteries, it is evident that the lithium-ion type used nowadays reveals better results due to its higher specific efficient energy, which maximizes energy autonomy to 200 km. In the beginning, the insertion of the electric vehicle was commercially harmed by the fundamental limitations of batteries as a power source. Conclusively, on certain occasions there have been improvements in the aerodynamics, engines, weight and size of the batteries, demonstrating the maturity of EVs.

Management of Charging Load of Electric Vehicles for Optimal Capacity Utilisation of Distribution Transformers

A de-centralised load management technique exploiting the flexibility in the charging of Electric Vehicles (EVs) is presented. Two charging regimes are assumed. The Controlled Charging Regime (CCR) between 16:30 hours and 06:00 hours of the next day and the Uncontrolled Charging Regime (UCR) between 06:00 hours and 16:30 hours of the same day. During the CCR, the charging of EVs is coordinated and controlled by means of a wireless two-way communication link between EV Smart Charge Controllers (EVSCCs) at EV owners’ premises and the EV Load Controller (EVLC) at the local LV distribution substation. The EVLC sorts the EVs batteries in ascending order of their states of charge (SoC) and sends command signals for charging to as many EVs as the transformer could allow at that interval based on the condition of the transformer as analysed by the Distribution Transformer Monitor (DTM). A real and typical urban LV area distribution network in Great Britain (GB) is used as the case study. The technique is applied on the LV area when its transformer is carrying the future load demand of the area on a typical winter weekday in the year 2050. To achieve the load management, load demand of the LV area network is decomposed into Non-EV load and EV load. The load on the transformer is managed by varying the EV load in an optimisation objective function which maximises the capacity utilisation of the transformer subject to operational constraints and non-disruption of daily trips of EV owners. Results show that with the proposed load management technique, LV distribution networks could accommodate high uptake of EVs without compromising the useful normal life expectancy of distribution transformers before the need for capacity reinforcement.

Fault Tree Analysis of the Reliability of Electric Vehicles in India

Innovations for electric vehicles have advanced quickly in latest decades. Large-scale business use of these vehicles is still constrained by reliability-related issues. By utilising fault tree (FT) and Monte Carlo simulation, a mathematical prototype is created that includes the reliability traits of all major electrical parts of the vehicle system, including the battery, motor, drive, controllers. The research demonstrates that by raising the component restoration rates, the vehicle’s survivability can be raised. A thorough discussion of this paradigm is provided, along with a presentation and analysis of the reliability estimations based on an electric vehicle. This research on the reliability design and maintenance of an electric vehicle can be supported by the ideas that are outlined in the paper. Additionally, the findings of this study may be helpful to those who build electric vehicle, especially when upgrading the components efficiency and planning for reliability increase.

Study on site selection planning of urban electric vehicle charging station

The large-scale development of electric vehicles(EVs)requires numerous charging stations to serve them,and the charging stations should be reasonably laid out and planned according to the charging demand of electric vehicles.Considering the costs of both operators and users,a site selection model for optimal layout planning of charging stations is constructed,and a queuing theory approach is used to determine the charging pile configuration to meet the charging demand in the planning area.To solve the difficulties of particle swarm global optimization search,the improved random drift particle swarm optimization(IRDPSO)and Voronoi diagram are used to jointly solve for the optimal layout of electric vehicles.The final arithmetic analysis verifies the feasibility and practicality of the model and algorithm,and the results show that the total social cost is minimized when the charging station is 9,the location of the charging station is close to the center of gravity and the layout is reasonable.

EVs聚合主动支撑的有源配电网协同调压策略

针对配电网因“双碳”目标下分布式电源与柔性负荷规模化接入导致的系统过/欠电压问题,提出了一种基于电动汽车(EVs)聚合主动支撑的有源配电网协同调压策略,并充分利用了柔性负荷聚合的调节作用,以支撑配电网安全高效运行。首先,提出了基于“出行链”概念的EVs聚合预测模型,以提高EVs聚合预测的精确性。其次,针对多个节点存在的电压问题,依据电压-功率灵敏度,提出了一种基于“EVs聚合-光伏多功能逆变器-无功治理设备”的协同调压策略,以促使节点电压的有效调节,减少无功治理设备的配置成本并保证系统安全供电。最后,通过不同方法的对比与多场景的测试,验证了所提EVs聚合预测方法与协同调压策略的有效性。

Designing an Effective Method for Automatic Electric Vehicle Charging Stations in a Static Environment

This article outlines an Effective Method for Automatic Electric Vehicle Charging Stations in a Static Environment. It consists of investigated wireless transformer structures with various ferrite forms. WPT technology has rapidly advanced in the last few years. At kilowatt power levels, the transmission distance grows from a few millimeters to several hundred millimeters with a grid to load efficiency greater than 90%. The improvements have made the WPT more appealing for electric vehicle (EV) charging applications in both static and dynamic charging scenarios. Static and dynamic WEVCS, two of the main applications, are described, and current developments with features from research facilities, academic institutions, and businesses are noted. Additionally, forthcoming concepts based WEVCS are analyzed and examined, including “dynamic” wireless charging systems (WCS). A dynamic wireless power transfer (DWPT) system, which can supply electricity to moving EVs, is one of the feasible alternatives. The moving secondary coil is part of the dynamic WPT system, which also comprises of many fixed groundside (primary) coils. An equivalent circuit between the stationary system and the dynamic WPT system that results from the stationary system is demonstrated by theoretical investigations. The dynamic WPT system’s solenoid coils outperform circular coils in terms of flux distribution and misalignment. The WPT-related EV wireless charging technologies were examined in this study. WPT can assist EVs in overcoming their restrictions on cost, range, and charging time.

From Trends to Drivers:Key Factors Propelling Electric Vehicle Sales

With the rapid advancement of human economic levels and modern civilization,the automobile manufacturing industry is increasingly confronted with challenges related to energy scarcity and environmental pollution.Low carbon emissions and energy savings have become the main focus of automotive development.Under the influence of government incentives,the sales of household electric vehicles(EVs)have increased significantly,although they still represent a small share of the overall car market.To examine the factors influencing consumer purchases of household EVs,this report integrates both qualitative and quantitative analyses,controlling for single variables.Using linear regression,an empirical analysis was conducted on 18 BYD models with varying ranges and prices.The results indicate a strong positive correlation between driving range,selling price,and EV sales.Looking ahead,the development of new energy vehicles should prioritize longer ranges,high-quality features,and cost-effective performance.