The Cr-plated coating inside a gun barrel can effectively improve the barrel’s erosion resistance and thus increase the service life.However,due to the cyclic thermal load caused by high-temperature gunpowder,micro-e...The Cr-plated coating inside a gun barrel can effectively improve the barrel’s erosion resistance and thus increase the service life.However,due to the cyclic thermal load caused by high-temperature gunpowder,micro-element damage tends to occur within the Cr coating/steel substrate interface,leading to a gradual deterioration in macro-mechanical properties for the material in the related region.In order to mimic this cyclic thermal load and,thereby,study the thermal erosion behavior of the Cr coating on the barrel’s inner wall,a laser emitter is utilized in the current study.With the help of in-situ tensile test and finite element simulation results,a shear stress distribution law of the Cr coating/steel substrate and a change law of the interface ultimate shear strength are identified.Studies have shown that the Cr coating/steel substrate interface’s ultimate shear strength has a significant weakening effect due to increasing temperature.In this study,the interfacial ultimate shear strength decreases from 2.57 GPa(no erosion)to 1.02 GPa(laser power is 160 W).The data from this experiment is employed to establish a Cr coating/steel substrate interface shear damage model.And this model is used to predict the flaking process of Cr coating by finite element method.The simulation results show that the increase of coating crack spacing and coating thickness will increase the service life of gun barrel.展开更多
Shear damage may occur in the process of metal machining such as blanking and cutting, where localized shear deformation is developed. Experimental findings indicate that microscopic shear damage evolution in aluminiu...Shear damage may occur in the process of metal machining such as blanking and cutting, where localized shear deformation is developed. Experimental findings indicate that microscopic shear damage evolution in aluminium alloy 2024T3 （A1 2024T3） is a multi-stage mechanism, including particle cracking, micro-shear banding, matrix microcracking and coalescence of microcracks. This study is an attempt to use a set of equations to describe the multi-stage shear damage evolution in Al 2024T3. The shear damage variables in terms of multi-couple parameters of a power-law hardening material have been defined. An evolution curve of shearing damage has been calculated from experimental data. The values of the shear damage variable at different stages of damage have also been calculated. By making use of the findings, the relation between the microscopic shear damage evolution and the macroscopic shear response of the material has been discussed.展开更多
The present study shows that naturally developed fracture surfaces in rocks display the properties of self-affine fractals. Surface roughness can be quantitatively characterized by fractal dimension D and the intercep...The present study shows that naturally developed fracture surfaces in rocks display the properties of self-affine fractals. Surface roughness can be quantitatively characterized by fractal dimension D and the intercept A on the log-log plot of variance: the former describes the irregularity and the later is statistically analogues to the slopes of asperities. In order to confirm the effects of these fractalparameters on the properties and mechanical behavior of rock joints, which have been observed in experiments under both normal andshear loadings, a theoretic model of rock joint is proposed on the basis of contact mechanics. The shape of asperity at contact is assumed to have a sinusoidal form in its representative scale r, with fractal dimension D and the intercept A. The model considers different local contact mechanisms, such as elastic deformation, frictional sliding and tensile fracture of the asperity. The empirical evolution law of surface damage developed in experiment is implemented into the model to up-date geometry of asperity in loading history. The effects of surface roughness characterized by D, A and re on normal and shear deformation of rock joint have been elaborated.展开更多
To pursue VNIIEF–VNIITF joint investigations,this paper briefly describes the experimental setup and provides numerical 3D-computation results(LEGAK-3D technique)on special features in the convergence dynamics of st...To pursue VNIIEF–VNIITF joint investigations,this paper briefly describes the experimental setup and provides numerical 3D-computation results(LEGAK-3D technique)on special features in the convergence dynamics of steel shells under their quasi-spherical explosive loading in the system with the 40-mm outer radius of the explosive layer.The computation results were compared with the data experimentally registered for shells of the 30KhGSA steel,both as-received and quenched to HRC 35...40,and the austenitic 12Kh18N10T stainless steel.The comparison was also made with laserinterferometry results obtained directly under explosive loading,as well as with gammatomography and scanning electron microscopy investigations of the recovered shells.展开更多
文摘The Cr-plated coating inside a gun barrel can effectively improve the barrel’s erosion resistance and thus increase the service life.However,due to the cyclic thermal load caused by high-temperature gunpowder,micro-element damage tends to occur within the Cr coating/steel substrate interface,leading to a gradual deterioration in macro-mechanical properties for the material in the related region.In order to mimic this cyclic thermal load and,thereby,study the thermal erosion behavior of the Cr coating on the barrel’s inner wall,a laser emitter is utilized in the current study.With the help of in-situ tensile test and finite element simulation results,a shear stress distribution law of the Cr coating/steel substrate and a change law of the interface ultimate shear strength are identified.Studies have shown that the Cr coating/steel substrate interface’s ultimate shear strength has a significant weakening effect due to increasing temperature.In this study,the interfacial ultimate shear strength decreases from 2.57 GPa(no erosion)to 1.02 GPa(laser power is 160 W).The data from this experiment is employed to establish a Cr coating/steel substrate interface shear damage model.And this model is used to predict the flaking process of Cr coating by finite element method.The simulation results show that the increase of coating crack spacing and coating thickness will increase the service life of gun barrel.
基金Project supported by the Research Grants Council of the Hong Kong Special Administrative Region (No. PolyU 5131/98E).
文摘Shear damage may occur in the process of metal machining such as blanking and cutting, where localized shear deformation is developed. Experimental findings indicate that microscopic shear damage evolution in aluminium alloy 2024T3 （A1 2024T3） is a multi-stage mechanism, including particle cracking, micro-shear banding, matrix microcracking and coalescence of microcracks. This study is an attempt to use a set of equations to describe the multi-stage shear damage evolution in Al 2024T3. The shear damage variables in terms of multi-couple parameters of a power-law hardening material have been defined. An evolution curve of shearing damage has been calculated from experimental data. The values of the shear damage variable at different stages of damage have also been calculated. By making use of the findings, the relation between the microscopic shear damage evolution and the macroscopic shear response of the material has been discussed.
文摘The present study shows that naturally developed fracture surfaces in rocks display the properties of self-affine fractals. Surface roughness can be quantitatively characterized by fractal dimension D and the intercept A on the log-log plot of variance: the former describes the irregularity and the later is statistically analogues to the slopes of asperities. In order to confirm the effects of these fractalparameters on the properties and mechanical behavior of rock joints, which have been observed in experiments under both normal andshear loadings, a theoretic model of rock joint is proposed on the basis of contact mechanics. The shape of asperity at contact is assumed to have a sinusoidal form in its representative scale r, with fractal dimension D and the intercept A. The model considers different local contact mechanisms, such as elastic deformation, frictional sliding and tensile fracture of the asperity. The empirical evolution law of surface damage developed in experiment is implemented into the model to up-date geometry of asperity in loading history. The effects of surface roughness characterized by D, A and re on normal and shear deformation of rock joint have been elaborated.
文摘To pursue VNIIEF–VNIITF joint investigations,this paper briefly describes the experimental setup and provides numerical 3D-computation results(LEGAK-3D technique)on special features in the convergence dynamics of steel shells under their quasi-spherical explosive loading in the system with the 40-mm outer radius of the explosive layer.The computation results were compared with the data experimentally registered for shells of the 30KhGSA steel,both as-received and quenched to HRC 35...40,and the austenitic 12Kh18N10T stainless steel.The comparison was also made with laserinterferometry results obtained directly under explosive loading,as well as with gammatomography and scanning electron microscopy investigations of the recovered shells.
