A grading parameter for evaluating the grading-dependence of the shear stiffness of granular aggregates

To capture the grading-dependence of the shear stiffness of heterogeneous granular aggregates, a new grading parameter that considered the size distribution of the entire aggregates was developed. Both the coefficient of uniformity and median particle size decreased with increasing the grading parameter. A general increase of the shear stiffness with increasing the grading parameter was observed. Compari- son with experimental results revealed that the proposed grading parameter had a stronger correlation with the material constants of Hardin＇s stiffness formula than the coefficient of uniformity, which is a traditional grading parameter.

Characteristics of root-permeated soil under simple-shear and direct-shear conditions

The simple-shear condition is closer to reality than the direct-shear condition for simulating the mechanical behavior of vegetated soil slope under shallow failure.However,study on simple-shear characteristics for vegetated slope is still insufficient,and there lacks intuitive comparison of characteristics between these two shear conditions.In this study,large-scale simple-shear and direct-shear experiments were conducted on soil permeated by roots of Amorpha fruticosa to investigate the shear strength and stiffness.The stress-displacement relationship of each sample was obtained and further normalized to unify the influence of root content.The results reveal that the direct-shear condition overestimates the shear strength of root-permeated soils(by 41%)and thus the estimation of slope stability based on the parameters of direct-shear condition is not conservative.Furthermore,the initial stiffness of root-permeated soil under simple-shear condition is 34%lower than that under direct-shear condition.The higher strength and stiffness under direct-shear condition are caused by the following reasons:the shear plane does not have the lowest strength,the shear area is decreasing,and the shear zone is thinner.The significant deformation(lower stiffness)revealed by the simple-shear condition facilitates the application of early warning for vegetated shallow landslides.

A New Modification to Shear Lag Model as Applied to Stiffness and Yield Strength of Short Fiber Reinforced Metal Matrix Composites

A new modification for the shear lag model is given and the expressions for the stiffness and yield Strength of short fiber metal matri×composite are derived. These expressions are then compared with our experimental data in a SiCw/Al-Li T6 composite and the published experimental data on different SiCw/Al T6 composites and also compared with the previous shear lag models and the other theoretical models.

Human Eosinophil Cell Manipulation by Optical Tweezers

In this work, lateral deformation of human eosinophil cell during the lateral indentation by an optically trapped microbead of diameter 4.5 µm is studied. The images were captured using a CCD camera and the Boltzmann statistics method was used for force calibration. Using the Hertz model, we calculated and compared the elastic moduli resulting from the lateral force, showing that the differences are important and the force should be considered. Besides the lateral component, the setup also allows us to examine the lateral cell-bead interaction. The mean values of the properties obtained, in particular the elastic stiffness and the shear stiffness, were Eh = (37.76 ± 2.85) µN/m and Gh = (12.57 ± 0.32) µN/m. These results show that the lateral indentation can therefore be used as a routine method for cell study, because it enabled us to manipulate the cell without contact with the laser.

Influence of anisotropic stress path and stress history on stiffness of calcareous sands from Western Australia and the Philippines

Investigation of dynamic properties of carbonate/calcareous soils is important in earthquake and offshore engineering as these soils are commonly encountered in large-scale projects related with energy geomechanics and land reclamation.In this study,the stiffness and stiffness anisotropy of two types of calcareous sands(CS)from the Western Australia and the Philippines were examined using bender elements configured in different directions in stress path setups.Stiffness measurements were taken on specimens subjected to constant p’compression/extension and biaxial stress paths and additional tests were performed on three types of silica sands with different geological origins and particle shapes,which were used as benchmark materials in the study.Compared with the three brands of silica sands,the stiffness of the CS was found to be more significantly influenced by anisotropic loading;an important observation of the experimental results was that stress anisotropy had different weighted influences on the stiffness in different directions,thus influencing stiffness anisotropy.Comparisons were made between the specimens subjected to complex loading paths,and respected model parameters as suggested from published expressions in the literature.These comparisons further highlighted that calcareous soils have different responses in terms of stiffness,stiffness anisotropy and loading history,compared with that of silica-based sands.

Modeling of Mechanical Behavior of Fractal Rock Joint

The present study shows that naturally developed fracture surfaces in rocks display the properties of self-affine fractals. Surface roughness can be quantitatively characterized by fractal dimension D and the intercept A on the log-log plot of variance: the former describes the irregularity and the later is statistically analogues to the slopes of asperities. In order to confirm the effects of these fractalparameters on the properties and mechanical behavior of rock joints, which have been observed in experiments under both normal andshear loadings, a theoretic model of rock joint is proposed on the basis of contact mechanics. The shape of asperity at contact is assumed to have a sinusoidal form in its representative scale r, with fractal dimension D and the intercept A. The model considers different local contact mechanisms, such as elastic deformation, frictional sliding and tensile fracture of the asperity. The empirical evolution law of surface damage developed in experiment is implemented into the model to up-date geometry of asperity in loading history. The effects of surface roughness characterized by D, A and re on normal and shear deformation of rock joint have been elaborated.

Freezing and thawing effects of sand-silt mixtures on elastic waves

Freezing and thawing during the winter season change soil properties such as density. The density change in the particulate media influences soil stiffness. In addition, freezing of partially or fully saturated soils changes the soil matrix from a particulate media to a continuum. The goal of this study is to investigate the cyclic freezing and thawing effects on elastic waves. Sand-silt mixtures with 10% silt fraction in weight and 40% saturation are prepared. The sand-silt mixtures are placed in a nylon cell, onto which a pair of bender elements and a pair of piezoelectric disk elements are installed for the measurement of shear and compressional waves, respectively. The temperature of the mixtures decreases from 20 ℃ to -10 ℃ to freezing. The frozen sample is gradually thawed at room temperature （20 ℃）, These freezing-thawing processes are repeated three times. The test result shows that the shear and compressional wave velocities significantly increase when the specimen is frozen. When the temperature is greater than 0 ℃, the elastic wave velocities are lower during thawing than during freezing due to soil structure change. This study demonstrates that soil strucre change during the winter season may be effectively estimated from elastic waves.

Effects of interface slip and semi-rigid joint on elastic seismic response of steel-concrete composite frames

The stiffness matrix of semi-rigidly connected composite beams considering interface slip was established and the calculation method for elastic seismic response of composite frame was derived.The corresponding calculation programs were developed.Introducing the dimensionless quantities that were related to the connector shearing stiffness and the joint rotation stiffness,the influences of interface slip and semi-rigid joint on composite frame were transferred to quantitative parameter analysis,taking account of cross sectional properties,materials and linear stiffness of composite beam synthetically.Based on the calculation programs,free vibration frequencies and seismic responses of semi-rigid joint steel-concrete composite frame considering interface slip were calculated.The influences of interface slip and semi rigid joint on dynamic characteristics and seismic response were analyzed and the seismic design advices were presented.The results show that the interface slip decreases the free vibration frequencies and increase the seismic responses of composite frame.The semi-rigid joint reduces the free vibration frequencies and increases seismic responses of composite frame compared with rigid joint.With the increase of joint rotational stiffness,the elastic seismic responses of composite frame increase firstly and then decrease.The effects are related to the ratio of joint rotation stiffness to linear stiffness of composite beam.

A nonlinear interface structural damage model between ice crystal and frozen clay soil

The shear properties of ice-frozen soil interface are important when studying the constitutive model of frozen soil and slope stability in cold regions. In this research, a series of cryogenic direct shear tests for ice-frozen clay soil interface were conducted. Based on experimental results, a nonlinear interface structural damage model is proposed to describe the shear properties of ice-frozen clay soil interface. Firstly, the cementation and friction structural properties of frozen soil materials were analyzed, and a structural parameter of the ice-frozen clay soil interface is proposed based on the cryogenic direct shear test results. Secondly, a structural coefficient ratio is proposed to describe the structural development degree of ice-frozen clay soil interface under load, which is able to normalize the shear stress of ice-frozen clay soil interface,and the normalized data can be described by the Duncan-Chang model. Finally, the tangent stiffness of ice-frozen clay soil interface is calculated, which can be applied to the mechanics analysis of frozen soil. Also, the shear stress of ice-frozen clay soil interface calculated by the proposed model is compared with test results.