Direct shear tests were conducted to obtain both the shear strength ofcompacted clay liners (CCLs) specimens and the interface shear strength between compacted clay linerand base soil. These experiments were conducted...Direct shear tests were conducted to obtain both the shear strength ofcompacted clay liners (CCLs) specimens and the interface shear strength between compacted clay linerand base soil. These experiments were conducted under the conditions of five different watercontents. The experimental results show that shear strength of both CCLs and CCLs/base interfacedecreases with the increase in the water content of CCLs and base soil. In addition, the considerateconcentration of NaCl in leachate has no deteriorating effect on the shear strength of liners.Triaxial shear tests were also conducted on clay liner specimens to obtain total and effective shearstrength under a fast compression. The shear strength parameters with total stress are φ=18. 5°and c=30 kPa for clay-bentonite, and φ=48. 5° and c=90 kPa for sand-bentonite and those witheffective stress are φ'= 27. 2° and c'=25 kPa for clay-bentonite, and φ'=35° and c'=100 kPa forsand-bentonite, respectively. These results indicate that the compacted clay-bentonite shows normalconsolidation, but that the compacted sand-bentonite exhibits over-consolidation.展开更多
Rock joints are often subjected to dynamic loads induced by earthquake and blasting during mining and rock cutting. Hence, cyclic shear load can be induced along the joints and it is important to evaluate the shear be...Rock joints are often subjected to dynamic loads induced by earthquake and blasting during mining and rock cutting. Hence, cyclic shear load can be induced along the joints and it is important to evaluate the shear behavior of rock joint under this condition. In the present study, synthetic rock joints were prepared with plaster of Paris(Po P). Regular joints were simulated by keeping regular asperity with asperity angles of 15°-15° and 30°-30°, and irregular rock joints which are closer to natural joints were replicated by keeping the asperity angles of 15°-30° and 15°-45°. The sample size and amplitude of roughness were kept the same for both regular and irregular joints which were 298 mm×298 mm×125 mm and 5 mm, respectively. Shear test was performed on these joints using a large-scale direct shear testing machine by keeping the frequency and amplitude of shear load under constant cyclic condition with different normal stress values. As expected, the shear strength of rock joints increased with the increases in the asperity angle and normal load during the first cycle of shearing or static load. With the increase of the number of shear cycles, the shear strength decreased for all the asperity angles but the rate of reduction was more in case of high asperity angles. Test results indicated that shear strength of irregular joints was higher than that of regular joints at different cycles of shearing at low normal stress. Shearing and degradation of joint asperities on regular joints were the same between loading and unloading, but different for irregular joints. Shear strength and joint degradation were more significant on the slope of asperity with higher angles on the irregular joint until two angles of asperities became equal during the cycle of shearing and it started behaving like regular joints for subsequent cycles.展开更多
In the last two decades, the study of reinforced concrete (RC) structures elements such as bridge deck slabs, bridge girders, or offshore installations, which?are?subjected to cyclic action typically induced by seismi...In the last two decades, the study of reinforced concrete (RC) structures elements such as bridge deck slabs, bridge girders, or offshore installations, which?are?subjected to cyclic action typically induced by seismic motions has received the attention of many researchers.?Furthermore, the past two decades have witnessed rapid growth in the use of fiber-reinforced polymer (FRP) confining jackets for the strengthening/retrofit of reinforced concrete (RC) columns and beams. Moreover, several theoretical and empirical models?have been proposed for evaluating the?shear strength of beams, columns and beam-to-column joints. In this?paper, an overview of the models currently available in the scientific literature for?evaluating the?shear capacity of?beams, columns and?exterior beam-to-column joints?is reported.?Further, important practical issues which contribute in?shear strengthening of structures with different element types especially RC beams with different strengthening techniques, such as steel plate and FRP laminate are discussed.?Finally,?directions for future research based on the existing gaps of the existing works are presented.展开更多
文摘Direct shear tests were conducted to obtain both the shear strength ofcompacted clay liners (CCLs) specimens and the interface shear strength between compacted clay linerand base soil. These experiments were conducted under the conditions of five different watercontents. The experimental results show that shear strength of both CCLs and CCLs/base interfacedecreases with the increase in the water content of CCLs and base soil. In addition, the considerateconcentration of NaCl in leachate has no deteriorating effect on the shear strength of liners.Triaxial shear tests were also conducted on clay liner specimens to obtain total and effective shearstrength under a fast compression. The shear strength parameters with total stress are φ=18. 5°and c=30 kPa for clay-bentonite, and φ=48. 5° and c=90 kPa for sand-bentonite and those witheffective stress are φ'= 27. 2° and c'=25 kPa for clay-bentonite, and φ'=35° and c'=100 kPa forsand-bentonite, respectively. These results indicate that the compacted clay-bentonite shows normalconsolidation, but that the compacted sand-bentonite exhibits over-consolidation.
基金the financial support of this research from Indian Institute of Technology Delhi
文摘Rock joints are often subjected to dynamic loads induced by earthquake and blasting during mining and rock cutting. Hence, cyclic shear load can be induced along the joints and it is important to evaluate the shear behavior of rock joint under this condition. In the present study, synthetic rock joints were prepared with plaster of Paris(Po P). Regular joints were simulated by keeping regular asperity with asperity angles of 15°-15° and 30°-30°, and irregular rock joints which are closer to natural joints were replicated by keeping the asperity angles of 15°-30° and 15°-45°. The sample size and amplitude of roughness were kept the same for both regular and irregular joints which were 298 mm×298 mm×125 mm and 5 mm, respectively. Shear test was performed on these joints using a large-scale direct shear testing machine by keeping the frequency and amplitude of shear load under constant cyclic condition with different normal stress values. As expected, the shear strength of rock joints increased with the increases in the asperity angle and normal load during the first cycle of shearing or static load. With the increase of the number of shear cycles, the shear strength decreased for all the asperity angles but the rate of reduction was more in case of high asperity angles. Test results indicated that shear strength of irregular joints was higher than that of regular joints at different cycles of shearing at low normal stress. Shearing and degradation of joint asperities on regular joints were the same between loading and unloading, but different for irregular joints. Shear strength and joint degradation were more significant on the slope of asperity with higher angles on the irregular joint until two angles of asperities became equal during the cycle of shearing and it started behaving like regular joints for subsequent cycles.
文摘作为热结构材料,陶瓷基复合材料(ceramic matrix composites,CMC)在航空航天领域应用潜力巨大。连续纤维的引入解决了陶瓷脆性大的问题,而纤维与基体间微小区域——界面层的设计是保证CMC具有高韧性的关键。一直以来相关研究主要集中于界面层与CMC宏观力学性能之间的关系,受限于表征难以深入研究界面层微区力学行为的困难。随着微纳力学测试与聚焦离子束(focused ion beam,FIB)技术的发展,近些年来对于CMC界面层结合强度以及其失效行为的表征逐渐增多。在此基础上,本文综述CMC中界面层的作用以及界面剪切强度的影响因素与调控机制,同时汇总当下通过直接或间接手段测试界面剪切强度的方法,重点总结微纳力学手段下纤维push-out/push-in以及微柱压缩等方法的适用条件以及差异,报道这些方法在界面区失效机制研究方面的进展,并指明尚存在的一些问题。其中,纤维pushout/push-in可以反映基体应力作用对界面剪切强度的影响,但测试结果可能受到外部因素的影响;而微柱压缩测试则更多地反映界面层本征特性,无法反映基体应力对界面剪切强度的影响,也无法反映纤维拔出过程。最后展望未来的研究方向:进一步拓展界面微区力学行为的表征方法,同时确定微区力学与宏观力学性能间的影响机制并建立模型,最终实现CMC的界面层优化。
基金the National Natural Science Foundation of China(Nos.51675414,51805416)the Joint Fund for Aerospace Advanced Manufacturing Technology Research Key Program,China(No.U1937203).
文摘In the last two decades, the study of reinforced concrete (RC) structures elements such as bridge deck slabs, bridge girders, or offshore installations, which?are?subjected to cyclic action typically induced by seismic motions has received the attention of many researchers.?Furthermore, the past two decades have witnessed rapid growth in the use of fiber-reinforced polymer (FRP) confining jackets for the strengthening/retrofit of reinforced concrete (RC) columns and beams. Moreover, several theoretical and empirical models?have been proposed for evaluating the?shear strength of beams, columns and beam-to-column joints. In this?paper, an overview of the models currently available in the scientific literature for?evaluating the?shear capacity of?beams, columns and?exterior beam-to-column joints?is reported.?Further, important practical issues which contribute in?shear strengthening of structures with different element types especially RC beams with different strengthening techniques, such as steel plate and FRP laminate are discussed.?Finally,?directions for future research based on the existing gaps of the existing works are presented.
