Traditional methods focus on the ultimate bending moment of glulam beams and the fracture failure of materials with defects,which usually depends on empirical parameters.There is no systematic theoretical method to pr...Traditional methods focus on the ultimate bending moment of glulam beams and the fracture failure of materials with defects,which usually depends on empirical parameters.There is no systematic theoretical method to predict the stiffness and shear distribution of glulam beams in elastic-plastic stage,and consequently,the failure of such glulam beams cannot be predicted effectively.To address these issues,an analytical method considering material nonlinearity was proposed for glulam beams,and the calculating equations of deflection and shear stress distribution for different failure modes were established.The proposed method was verified by experiments and numerical models under the corresponding conditions.Results showed that the theoretical calculations were in good agreement with experimental and numerical results,indicating that the equations proposed in this paper were reliable and accurate for such glulam beams with wood material in the elastic-plastic stage ignoring the influence of mechanic properties in radial and tangential directions of wood.Furthermore,the experimental results reported by the previous studies indicated that the method was applicable and could be used as a theoretical reference for predicting the failure of glulam beams.展开更多
Shear stress distribution prediction in open channels is of utmost importance in hydraulic structural engineering as it directly affects the design of stable channels.In this study,at first,a series of experimental te...Shear stress distribution prediction in open channels is of utmost importance in hydraulic structural engineering as it directly affects the design of stable channels.In this study,at first,a series of experimental tests were conducted to assess the shear stress distribution in prismatic compound channels.The shear stress values around the whole wetted perimeter were measured in the compound channel with different floodplain widths also in different flow depths in subcritical and supercritical conditions.A set of,data mining and machine learning algorithms including Random Forest(RF),M5P,Random Committee,KStar and Additive Regression implemented on attained data to predict the shear stress distribution in the compound channel.Results indicated among these five models;RF method indicated the most precise results with the highest R2 value of 0.9.Finally,the most powerful data mining method which studied in this research compared with two well-known analytical models of Shiono and Knight method(SKM)and Shannon method to acquire the proposed model functioning in predicting the shear stress distribution.The results showed that the RF model has the best prediction performance compared to SKM and Shannon models.展开更多
Rock anchors are a common safety measure for stabilising large-scale infrastructure,such as bridge towers,retaining walls,rock slopes and windmills.There are four principal failure modes for rock anchors:(a)tensile fa...Rock anchors are a common safety measure for stabilising large-scale infrastructure,such as bridge towers,retaining walls,rock slopes and windmills.There are four principal failure modes for rock anchors:(a)tensile failure of the steel anchor,(b)anchor-grout interface failure,(c)grout-rock interface failure,and(d)rock mass uplift.Field tests were performed in a limestone quarry.These tests were designed to test failure modes B and C through pullout.In the tests of failure mode B,the shear stress on the anchor-grout interface is the largest at the top of the grout column and attenuates towards the distal end for small loads.The shear stress becomes uniformly distributed when the applied load is approximately 50%of the ultimate pullout load.The anchors designed to test failure mode C were installed with an endplate and had a higher toughness than the straight bar anchors.The shear stress on the grout-rock interface is the largest at the endplate and attenuates upward before slip starts along the interface.When the ultimate pullout load is reached,and the grout column starts to slip,the shear stress is approximately constant.The bond shear strength on the anchor-grout interface was approximately 20%of the uniaxial compressive strength of the grout,and the bond strength of the grout-rock interface was around 5%for that of the grout.The grout-rock interface is likely determined by whichever is weaker,the grout or the rock.展开更多
In dialysis treatment, the radio-cephalic arteriovenous fistula (RCAVF) is a commonly used fistula, yet its low maturation rate remains a challenge. To enhance surgical outcomes, the relationship between stenosis-pron...In dialysis treatment, the radio-cephalic arteriovenous fistula (RCAVF) is a commonly used fistula, yet its low maturation rate remains a challenge. To enhance surgical outcomes, the relationship between stenosis-prone locations and RCAVF anastomosis angle is studied during maturation by developing two sets of RCAVF models for early (non-mature) and mature RCAVFs at five anastomosis angles. The impact of hemodynamics and wall shear stress (WSS) is examined to determine optimal anastomotic angles. Results indicate that acute angles produce more physiological WSS distributions and fewer disturbed regions, with early stenosis-prone regions located near the anastomosis that shift to the bending venous segment during remodeling. A pilot study comparing clinical and numerical results is conducted for validation.展开更多
基金support from High-Level Natural ScienceFoundation of Hainan Province of China (Grant No. 2019RC055)National Natural Science Foundation ofChina (Grant No. 51808176) and the Project Funded by the National First-Class Disciplines (PNFD).
文摘Traditional methods focus on the ultimate bending moment of glulam beams and the fracture failure of materials with defects,which usually depends on empirical parameters.There is no systematic theoretical method to predict the stiffness and shear distribution of glulam beams in elastic-plastic stage,and consequently,the failure of such glulam beams cannot be predicted effectively.To address these issues,an analytical method considering material nonlinearity was proposed for glulam beams,and the calculating equations of deflection and shear stress distribution for different failure modes were established.The proposed method was verified by experiments and numerical models under the corresponding conditions.Results showed that the theoretical calculations were in good agreement with experimental and numerical results,indicating that the equations proposed in this paper were reliable and accurate for such glulam beams with wood material in the elastic-plastic stage ignoring the influence of mechanic properties in radial and tangential directions of wood.Furthermore,the experimental results reported by the previous studies indicated that the method was applicable and could be used as a theoretical reference for predicting the failure of glulam beams.
文摘Shear stress distribution prediction in open channels is of utmost importance in hydraulic structural engineering as it directly affects the design of stable channels.In this study,at first,a series of experimental tests were conducted to assess the shear stress distribution in prismatic compound channels.The shear stress values around the whole wetted perimeter were measured in the compound channel with different floodplain widths also in different flow depths in subcritical and supercritical conditions.A set of,data mining and machine learning algorithms including Random Forest(RF),M5P,Random Committee,KStar and Additive Regression implemented on attained data to predict the shear stress distribution in the compound channel.Results indicated among these five models;RF method indicated the most precise results with the highest R2 value of 0.9.Finally,the most powerful data mining method which studied in this research compared with two well-known analytical models of Shiono and Knight method(SKM)and Shannon method to acquire the proposed model functioning in predicting the shear stress distribution.The results showed that the RF model has the best prediction performance compared to SKM and Shannon models.
文摘Rock anchors are a common safety measure for stabilising large-scale infrastructure,such as bridge towers,retaining walls,rock slopes and windmills.There are four principal failure modes for rock anchors:(a)tensile failure of the steel anchor,(b)anchor-grout interface failure,(c)grout-rock interface failure,and(d)rock mass uplift.Field tests were performed in a limestone quarry.These tests were designed to test failure modes B and C through pullout.In the tests of failure mode B,the shear stress on the anchor-grout interface is the largest at the top of the grout column and attenuates towards the distal end for small loads.The shear stress becomes uniformly distributed when the applied load is approximately 50%of the ultimate pullout load.The anchors designed to test failure mode C were installed with an endplate and had a higher toughness than the straight bar anchors.The shear stress on the grout-rock interface is the largest at the endplate and attenuates upward before slip starts along the interface.When the ultimate pullout load is reached,and the grout column starts to slip,the shear stress is approximately constant.The bond shear strength on the anchor-grout interface was approximately 20%of the uniaxial compressive strength of the grout,and the bond strength of the grout-rock interface was around 5%for that of the grout.The grout-rock interface is likely determined by whichever is weaker,the grout or the rock.
文摘In dialysis treatment, the radio-cephalic arteriovenous fistula (RCAVF) is a commonly used fistula, yet its low maturation rate remains a challenge. To enhance surgical outcomes, the relationship between stenosis-prone locations and RCAVF anastomosis angle is studied during maturation by developing two sets of RCAVF models for early (non-mature) and mature RCAVFs at five anastomosis angles. The impact of hemodynamics and wall shear stress (WSS) is examined to determine optimal anastomotic angles. Results indicate that acute angles produce more physiological WSS distributions and fewer disturbed regions, with early stenosis-prone regions located near the anastomosis that shift to the bending venous segment during remodeling. A pilot study comparing clinical and numerical results is conducted for validation.