This work presents a new approach for simulating the random waves in viscous fluids and the associated bottom shear stresses. By generating the incident random waves in a numerical wave flume and solving the unsteady ...This work presents a new approach for simulating the random waves in viscous fluids and the associated bottom shear stresses. By generating the incident random waves in a numerical wave flume and solving the unsteady two-dimensional Navier-Stokes equations and the fully nonlinear free surface boundaiy conditions for the fluid flows in the flume, the viscous flows and laminar bottom shear stresses induced by random waves axe determined. The deterministic spectral amplitude method implemented by use of the fast Fourier transform algorithm was adopted to generate the incident random waves. The accuracy of the numerical scheme is confirmed by comparing the predicted wave spectrum with the target spectrum and by comparing the nanlerical transfer function between the shear stress and the surface elevation with the theoretical transfer function. The maximum bottom shear stress caused by random waves, computed by this wave model, is compared with that obtained by Myrhaug＇ s model （1995）. The transfer function method is also employed to determine the maximum shear stress, and is proved accurate.展开更多
In our previous work, a low-shear stirred bioreactor was explored. With a pitched blade turbine impeller downflow(PBTD) used, the shear stress generated is high compared with that in some low shear axial flow impeller...In our previous work, a low-shear stirred bioreactor was explored. With a pitched blade turbine impeller downflow(PBTD) used, the shear stress generated is high compared with that in some low shear axial flow impellers. KHX impeller is an efficient axial flow impeller, which provides large onflow diffusivity and low shear force. In this work, the KHX impeller was applied in a lower-shear bioreactor and the performance of this reactor was evaluated and compared with that of the PBTD impeller. The experimental results show that the KHX impeller can disperse gas at lower power consumption and gives greater gas–liquid volumetric mass transfer coefficients than PBTD at the same power consumption. An empirical correlation for evaluating the mass transfer coefficient of the KHX impeller in the bioreactor is presented to provide reference for its industrial application.展开更多
The heat transfer of supercritical fluids is a vastly growing field, specifically to find suitable <span style="font-family:Verdana;">alternative to replace conventional R134a, which can be beneficial ...The heat transfer of supercritical fluids is a vastly growing field, specifically to find suitable <span style="font-family:Verdana;">alternative to replace conventional R134a, which can be beneficial for climate change. A </span><span style="font-family:Verdana;">considerable suggestion is R515A which possesses considerably lower global warming potential. The present simulations are designed to study supercritical fluid R515A under cooling conditions in horizontal position. The effect of pressure, mass flux, heat flux and tube diameter were considered for horizontal tube in the vicinity of pseudo critical temperature. Numeri</span><span style="font-family:Verdana;">cal investigations on heat transfer characteristics of supercritical fluid R515A were per</span><span style="font-family:Verdana;">formed using widely used shear-stress transport (SST) model. Moreover, heat transfer correlations </span><span style="font-family:Verdana;">were developed and suggested to accurately predict Nusselt number within 10% accuracy. </span><span style="font-family:Verdana;">The simulation results showed about 3.98% average absolute deviation.</span>展开更多
Several industrial applications such as electronic devices,heat exchangers,gas turbine blades,etc.need cooling processes.The internal cooling technique is proper for some applications.In the present work,computational...Several industrial applications such as electronic devices,heat exchangers,gas turbine blades,etc.need cooling processes.The internal cooling technique is proper for some applications.In the present work,computational simulations were made using ANSYS CFX to predict the improvements of internal heat transfer in the rectangular ribbed channel using different coolants.Several coolants such as air,steam,air/mist and steam/mist were investigated.The shear stress transport model(SST)is selected by comparing the standard k-ωand Omega Reynolds Stress(ωRS)turbulence models with experimental results.The results indicate that the heat transfer coefficients are enhanced in the ribbed channel while injecting small amounts of mist.The heat transfer coefficients of air/mist,steam and steam/mist increase by 12.5%,49.5%and 107%over that of air,respectively.Furthermore,in comparison to air,the air/mist heat transfer coefficient enhances by about 1.05 to 1.14 times when the mist mass fraction increases from 2%to 8%,respectively.The steam/mist heat transfer coefficient increases by about 1.12 to 1.27 times higher than that of steam over the considered range of mist mass fraction.展开更多
基于室内物理模型试验和原位锚固试验,对基于高模数硅酸钾溶液-（粉煤灰＋粉土）（PS-（F＋C））浆液的木锚杆锚固系统在夯土介质中进行了拉拔测试与杆体-浆体界面应变监测,研究了该锚固系统的锚固性能与破坏模式、杆体-浆体界面剪应力...基于室内物理模型试验和原位锚固试验,对基于高模数硅酸钾溶液-（粉煤灰＋粉土）（PS-（F＋C））浆液的木锚杆锚固系统在夯土介质中进行了拉拔测试与杆体-浆体界面应变监测,研究了该锚固系统的锚固性能与破坏模式、杆体-浆体界面剪应力分布与传递特征。结果表明：该锚固系统室内试验极限锚固力（24～38 k N）远大于现场试验值（2.5～8 k N）;锚固系统具有低弹性强塑性特征,表现出极强的延性;在荷载进程中杆体-浆体界面的应力分布与传递特征具有多峰值分布、高值往往出现在锚固末端、压应力出现等特征,表明该锚固系统兼有拉力型和压力型全长黏结性锚固系统的特点;该系统适合于夯筑土遗址锚固,与遗址具有良好的物理力学兼容性。展开更多
基金the Science Council (Grant No. NSC95-2221-E-006-474)
文摘This work presents a new approach for simulating the random waves in viscous fluids and the associated bottom shear stresses. By generating the incident random waves in a numerical wave flume and solving the unsteady two-dimensional Navier-Stokes equations and the fully nonlinear free surface boundaiy conditions for the fluid flows in the flume, the viscous flows and laminar bottom shear stresses induced by random waves axe determined. The deterministic spectral amplitude method implemented by use of the fast Fourier transform algorithm was adopted to generate the incident random waves. The accuracy of the numerical scheme is confirmed by comparing the predicted wave spectrum with the target spectrum and by comparing the nanlerical transfer function between the shear stress and the surface elevation with the theoretical transfer function. The maximum bottom shear stress caused by random waves, computed by this wave model, is compared with that obtained by Myrhaug＇ s model （1995）. The transfer function method is also employed to determine the maximum shear stress, and is proved accurate.
基金Supported by the National Basic Research Program of China(2010CB630904)the National Natural Science Foundation of China(21276004,20990224)+1 种基金the National Natural Science Fund for Distinguished Young Scholars(21025627)the National High Technology Research and Development Program of China(2012AA061503)
文摘In our previous work, a low-shear stirred bioreactor was explored. With a pitched blade turbine impeller downflow(PBTD) used, the shear stress generated is high compared with that in some low shear axial flow impellers. KHX impeller is an efficient axial flow impeller, which provides large onflow diffusivity and low shear force. In this work, the KHX impeller was applied in a lower-shear bioreactor and the performance of this reactor was evaluated and compared with that of the PBTD impeller. The experimental results show that the KHX impeller can disperse gas at lower power consumption and gives greater gas–liquid volumetric mass transfer coefficients than PBTD at the same power consumption. An empirical correlation for evaluating the mass transfer coefficient of the KHX impeller in the bioreactor is presented to provide reference for its industrial application.
文摘The heat transfer of supercritical fluids is a vastly growing field, specifically to find suitable <span style="font-family:Verdana;">alternative to replace conventional R134a, which can be beneficial for climate change. A </span><span style="font-family:Verdana;">considerable suggestion is R515A which possesses considerably lower global warming potential. The present simulations are designed to study supercritical fluid R515A under cooling conditions in horizontal position. The effect of pressure, mass flux, heat flux and tube diameter were considered for horizontal tube in the vicinity of pseudo critical temperature. Numeri</span><span style="font-family:Verdana;">cal investigations on heat transfer characteristics of supercritical fluid R515A were per</span><span style="font-family:Verdana;">formed using widely used shear-stress transport (SST) model. Moreover, heat transfer correlations </span><span style="font-family:Verdana;">were developed and suggested to accurately predict Nusselt number within 10% accuracy. </span><span style="font-family:Verdana;">The simulation results showed about 3.98% average absolute deviation.</span>
基金Supported by the China Scholarship Council (CSC) under Grant No.2011BSZF88
文摘Several industrial applications such as electronic devices,heat exchangers,gas turbine blades,etc.need cooling processes.The internal cooling technique is proper for some applications.In the present work,computational simulations were made using ANSYS CFX to predict the improvements of internal heat transfer in the rectangular ribbed channel using different coolants.Several coolants such as air,steam,air/mist and steam/mist were investigated.The shear stress transport model(SST)is selected by comparing the standard k-ωand Omega Reynolds Stress(ωRS)turbulence models with experimental results.The results indicate that the heat transfer coefficients are enhanced in the ribbed channel while injecting small amounts of mist.The heat transfer coefficients of air/mist,steam and steam/mist increase by 12.5%,49.5%and 107%over that of air,respectively.Furthermore,in comparison to air,the air/mist heat transfer coefficient enhances by about 1.05 to 1.14 times when the mist mass fraction increases from 2%to 8%,respectively.The steam/mist heat transfer coefficient increases by about 1.12 to 1.27 times higher than that of steam over the considered range of mist mass fraction.
文摘基于室内物理模型试验和原位锚固试验,对基于高模数硅酸钾溶液-（粉煤灰＋粉土）（PS-（F＋C））浆液的木锚杆锚固系统在夯土介质中进行了拉拔测试与杆体-浆体界面应变监测,研究了该锚固系统的锚固性能与破坏模式、杆体-浆体界面剪应力分布与传递特征。结果表明：该锚固系统室内试验极限锚固力（24～38 k N）远大于现场试验值（2.5～8 k N）;锚固系统具有低弹性强塑性特征,表现出极强的延性;在荷载进程中杆体-浆体界面的应力分布与传递特征具有多峰值分布、高值往往出现在锚固末端、压应力出现等特征,表明该锚固系统兼有拉力型和压力型全长黏结性锚固系统的特点;该系统适合于夯筑土遗址锚固,与遗址具有良好的物理力学兼容性。
