Development of multi-functional anchorage support dynamic-static coupling performance test system and its application

In underground engineering with complex conditions,the bolt(cable)anchorage support system is in an environment where static and dynamic stresses coexist,under the action of geological conditions such as high stresses and strong disturbances and construction conditions such as the application of high prestress.It is essential to study the support components performance under dynamic-static coupling conditions.Based on this,a multi-functional anchorage support dynamic-static coupling performance test system(MAC system)is developed,which can achieve 7 types of testing functions,including single component performance,anchored net performance,anchored rock performance and so on.The bolt and cable mechanical tests are conducted by MAC system under different prestress levels.The results showed that compared to the non-prestress condition,the impact resistance performance of prestressed bolts(cables)is significantly reduced.In the prestress range of 50–160 k N,the maximum reduction rate of impact energy resisted by different types of bolts is 53.9%–61.5%compared to non-prestress condition.In the prestress range of 150–300 k N,the impact energy resisted by high-strength cable is reduced by76.8%–84.6%compared to non-prestress condition.The MAC system achieves dynamic-static coupling performance test,which provide an effective means for the design of anchorage support system.

Time-dependent behavior and permeability evolution of limestone under hydro-mechanical coupling

Excessively high pore water pressure presents unpredictable risks to the safety of rock tunnels in mountainous regions that are predominantly composed of limestone. Investigating the creep characteristics and permeability evolution of limestone under varying hydrated conditions is crucial for a better understanding of the delayed deformation mechanisms of limestone rock tunnels. To this end, this paper initially conducts a series of multi-stage triaxial creep tests on limestone samples under varying pore water pressures. The experiment examines how pore water pressure affects limestone’s creep strain, strain rate, long-term strength, lifespan, and permeability, all within the context of hydraulicmechanical(HM) coupling. To better describe the creep behavior associated with pore water pressure, this paper proposes a new nonlinear fractional creep constitutive model. This constitutive model depicts the initial, steady-state, and accelerated phases of limestone’s creep behavior. Finally, the proposed model is applied to the numerical realization of deformation in limestone tunnel, validating the effectiveness of the proposed constitutive model in predicting tunnel’s creep deformation. This research enhances our understanding of limestone’s creep characteristics and permeability evolution under HM coupling, laying a foundation for assessing the longterm stability of mountain tunnels.

Determination method of permafrost table in seasonal frozen soil areas under“Water-Heat-Salt”coupling

The permafrost table is an important index for the design and construction of roads in cold regions,so it is necessary to find a convenient,accurate and fast judgment method to determine the permafrost table.In this study,a three-field coupled model was established based on the hydrothermal salt coupling within the permafrost and the similarity theory,and the changes of the permafrost table under different temperature,moisture and salt conditions were numerically simulated by considering the transient temperature change and the influence of the permafrost layer on the seasonally thawed layer.In addition,an accelerated permafrost table test method was designed based on the time-domain variation and hydrothermal salt coupling by the similarity theory,which rapidly simulated the permafrost table change under different temperatures,moisture,and salts in the natural environment.Comparing the simulation and test results with the measured values in the field,the errors are less than 3%,which verified the feasibility of the method for determining the permafrost table,and the simulated results are better than the test results.Results show that the results of determining the permafrost table with a single index have different degrees of deviation,and the permafrost table obtained by the temperature index is the most accurate in general,and it is more accurate to use the average value of the three indexes as the permafrost table compared with a single index.

A Metadata Model Based on Coupling Testing Information to Increase Testability of Component

A software component must be tested every time it is reused in order to assure quality of component itself and system in which it is to be integrated.So how to increase testability of component has become a key technology in the software engineering community.Here a method is introduced to increase component testability.And meanings of component testability and relative effective ways to increase testability are summarized.Then definitions of component coupling testing criterion,DU-I(Definition-Use Information) and OP-Vs(Observation-Point Values)are given.Base on these,a definition-use table is introduced,which includes DU-A and OP-Vs item,to help component testers to understand and observe interior details about component under test better.Then a framework of testable component based on above DU-table is given.These facilities provide ways to detect errors,observe state variables by observation-points based monitor mechanism.Moreover,above methods are applied to our application developed by ourselves before,and some test cases are generated.Then our method is compared with Orso method and Kan method using the same example,presenting the comparison results.The results illustrate the validity of our method,effectively generating test cases and killing more mutants.

Analytical evaluation of steady-state solute distribution in through- diffusion and membrane behavior test under non-perfectly flushing boundary conditions

The through-diffusion and membrane behavior testing procedure using a closed-system apparatus has been widely used for concurrent measurement of diffusion and membrane efficiency coefficients of low-permeability clay-based barrier materials.However,the common assumption of perfectly flushing conditions at the specimen boundaries could induce errors in analyses of the diffusion coefficients and membrane efficiencies.In this study,an innovative pseudo three-dimensional(3D)analytical method was proposed to evaluate solute distribution along the boundary surfaces of the soil-porous disks system,considering the non-perfectly flushing conditions.The results were consistent with numerical models under two scenarios considering different inflow/outflow positions.The proposed model has been demonstrated to be an accurate and reliable method to estimate solute distributions along the bound-aries.The calculated membrane efficiency coefficient and diffusion coefficient based on the proposed analytical method are more accurate,resulting in up to 50%less relative error than the traditional approach that adopts the arithmetic mean value of the influent and effluent concentrations.The retar-dation factor of the clay specimen also can be calculated with a revised cumulative mass approach.Finally,the simulated transient solute transport matched with experimental data from a multi-stage through-diffusion and membrane behavior test,validating the accuracy of the proposed method.

A well test analysis model of generalized tube flow and seepage coupling

"Generalized mobility"is used to realize the unification of tube flow and seepage in form and the unification of commonly used linear and nonlinear flow laws in form,which makes it possible to use the same form of motion equations to construct unified governing equations for reservoirs of different scales in different regions.Firstly,by defining the generalized mobility under different flow conditions,the basic equation governing fluid flow in reservoir coupling generalized tube flow and seepage is established.Secondly,two typical well test analysis models for coupling tube flow and seepage flow are given,namely,pipe-shaped composite reservoir model and partially open cylindrical reservoir model.The log-log pressure draw-down type-curve of composite pipe-shaped reservoir model can show characteristics of two sets of linear flow.The log-log pressure drawdown plot of partially opened cylindrical reservoir model can show the characteristics of spherical flow and linear flow,as well as spherical flow and radial flow.The pressure build-up derivative curves of the two models basically coincide with their respective pressure drawdown derivative curves in the early stage,pulling down features in the late stage,and the shorter the production time is,the earlier the pulling down feature appears.Finally,the practicability and reliability of the models presented in this paper are verified by three application examples.

Coupling mechanism between mining-induced deformation and permeability of coal

The coupling mechanism between mining-induced mechanical behavior and gas permeability of coal is effectively obtained in laboratory.This study means significant understanding of the prevention of coal-gas outburst.The testing samples of coal were drilled from the 14120 mining face at the depth of690 m.Based on the redistribution of stress during the excavation,the coupling test between mechanical state and seepage has been designed using the triaxial servo-controlled seepage equipment for thermofluid-solid coupling of coal containing methane.It is the result that there are two main factors influencing the mining-induced mechanical behavior of coal,such as the change ofσ_1-σ_3 andΔσ_1-Δσ_3.The failure mode mainly depends on the value ofσ_1-σ_3,and the peak strength value mainly depends on the value ofΔσ_1-Δσ_3.The difference of mechanical response between geostress and mining-induced stress has been obtained,which can be a theoretical support for safe mining such as reasonable gas drainage,prevention of coal-gas outburst and gas over-limit.

Synthesis of Diethyl Oxalate by a Coupling-Regeneration Reaction of Carbon Monoxide

This article describes a process for the synthesis of diethyl oxalate by a coupling reaction of carbon monoxide, catalyzed by palladium in the presence of ethyl nitrite. The kinetics and mechanism of the coupling and regeneration reaction are also discussed. This paper presents the results of a scale-up test of the catalyst and the process based on an a priori computer simulation.

FEM-DEM coupled modeling of cone penetration tests in lunar soil

Cone penetration test(CPT)is an appropriate technique for quickly determining the geotechnical properties of lunar soil,which is valuable for in situ lunar exploration.Utilizing a typical coupling method recently developed by the authors,a finite element method(FEM)-discrete element method(DEM)coupled model of CPTs is obtained.A series of CPTs in lunar soil are simulated to qualitatively reveal the flow of particles and the development of resistance throughout the penetration process.In addition,the effects of major factors,such as penetration velocity,penetration depth,cone tip angle,and the low gravity on the Moon surface are investigated.

Experimental study on magnetomechanical coupling effect of Q235 steel tubular member specimens

The magnetomechanical coupling tests were performed on Q235 steel tubular model specimens in NIM-2000HF magnetomechanical coupling equipment. The hysteresis loops were obtained in different magnetic fields and stresses. The magnetization curves were also achieved at different stresses. The influence of applied stresses on the hysteresis loops was investigated. The stress sensitive region and linear stress sensitive region of magnetic induction are determined for the model specimen according to the experimental data. The linear dependence relation of magnetic induction versus applied stresses is established, and the optimum magnetic field is determined in the stress sensitive range of magnetic induction, which builds a basis for nondestructive testing (NDT) of stress with the total magnetic flux for steel structure.

Thermal-hydro-mechanical coupling damage model of brittle rock

Based on fluid mechanics, thermodynamics and damage mechanics, thermal-hydro-mechanical （THM） coupling damage model of brittle rock is established by analyzing THM coupling mechanism, where THM coupling damage variable DTHM is dominated by TH coupling damage variable DTH, TM coupling damage variable DTM and HM coupling damage variable DHM, and DTH is firstly expressed in term of dimensionless total thermal conductivity of the water Nu. Permeability test, uni-axial compression test and THM coupling test are conducted to measure the permeability, elastic modulus and THM coupling stress-strain curves of brittle rock. The tested values of THM coupling elastic modulus E＇HM are in good agreement with the predicted values of THM coupling elastic modulus ETHM, which can verify the newly established THM coupling damage model.

Crack initiation rate of brittle rock under thermal-hydro-mechanical coupling condition

A calculation formula of thermal-hydro-mechanical(THM)coupling crack initiation rate for brittle rock was derived based on the energy conservation law.The self-designed THM coupling fracture test with conductive adhesive electrical measurement method was applied to measuring the THM coupling crack propagation rate of brittle rock continuously.Research results show that both calculation and test results of crack initiation rate increased with increase of the temperature and the hydraulic pressure.They are almost in good agreement,which can prove validity of the calculation formula of THM coupling crack initiation rate.

Electrical crosstalk-coupling measurement and analysis for digital closed loop fibre optic gyro

The phase modulation and the closed-loop controller can generate electrical crosstalk-coupling in digital closed- loop fibre optic gyro. Four electrical cross-coupling paths are verified by the open-loop testing approach. It is found the variation of ramp amplitude will lead to the alternation of gyro bias. The amplitude and the phase parameters of the electrical crosstalk signal are measured by lock-in amplifier, and the variation of gyro bias is confirmed to be caused by the alternation of phase according to the amplitude of the ramp. A digital closed-loop fibre optic gyro electrical crosstalk-coupling model is built by approximating the electrical cross-coupling paths as a proportion and integration segment. The results of simulation and experiment show that the modulation signal electrical crosstalk-coupling can cause the dead zone of the gyro when a small angular velocity is inputted, and it could also lead to a periodic vibration of the bias error of the gyro when a large angular velocity is inputted.

Experimental Study on Scouring and Silting Deformation of Artificial Beach Under Storm Surge−Wave Coupling

With the increasing construction of artificial beach in coastal areas, it is of practical significance to study the beach surface deformation of artificial beach profile. Previous studies only focus on a single wave dynamic factor, and it is difficult to predict the beach deformation of artificial beach profile under the storm surge-wave co-action. To solve this problem, the cross-section physical model test method was used to study the beach surface deformation of a typical artificial beach profile in Shuangdao Bay, Weihai, Shandong Province, after continuous wave actions till they stabilize. The characteristics of beach surface deformation under the conditions of constant water levels, laddershaped water level combined with corresponding wave elements and storm surge-wave co-action are compared and analyzed. A beach profile model which satisfies the theory of Bruun model is proposed. The test results show that the maximum scour depth of beach under storm surge-wave co-action is smaller and the scour range is obviously larger than that under the condition of constant water levels or ladder-shaped water level. The evaluation of the maximum scour depth by traditional model test tends to be conservative while the evaluation of the scour range is insufficient.The research results can provide scientific reference for designing artificial beaches.

Development and application of multi-field coupled high-pressure triaxial apparatus for soil

The increasing severity of ground subsidence,ground fissure and other disasters caused by the excessive exploitation of deep underground resources has highlighted the pressing need for effective management.A significant contributing factor to the challenges faced is the inadequacy of existing soil mechanics experimental instruments in providing effective indicators,creating a bottleneck in comprehensively understanding the mechanisms of land subsidence.It is urgent to develop a multi-field and multi-functional soil mechanics experimental system to address this issue.Based soil mechanics theories,the existing manufacturing capabilities of triaxial apparatus and the practical demands of the test system,a set of multi-field coupled high-pressure triaxial system is developed tailored for testing deep soils(at depths of approximately 3000 m)and soft rock.This system incorporates specialized design elements such as high-pressure chamber and horizontal deformation testing devices.In addition to the conventional triaxial tester functions,its distinctive feature encompass a horizontal deformation tracking measuring device,a water release testing device and temperature control device for the sample.This ensemble facilitates testing of horizontal and vertical deformation water release and other parameters of samples under a specified stress conditions,at constant or varying temperature ranging from-40℃–90℃.The accuracy of the tested parameters meets the requirements of relevant current specifications.The test system not only provides scientifically robust data for revealing the deformation and failure mechanism of soil subjected to extreme temperature,but also offers critical data support for major engineering projects,deep exploration and mitigation efforts related to soil deformation-induced disaster.

Experimental Study on Anchoring Physical Properties of Different Anchoring Lengths Coupled with Temperature and Pressure

Aiming at deep roadway anchorage solids, laboratory similar model tests were used to reveal the mechanical properties of anchorage solids with different anchorage lengths under the coupling effect of temperature and pressure, and SPSS statistical analysis software was used to conduct linear regression analysis of the ultimate anchorage force obtained from the tests. The results show that: through multiple linear regression analysis, the influence degree of temperature and pressure coupling on the ultimate anchorage force is arranged in order of anchoring length > surrounding rock strength > temperature > side pressure coefficient, and the linear regression equation of the model is obtained. Compared with the linear regression equation of simulation results, the model has a high explanatory ability.

基于双重介质渗流-应力耦合模型的高压压水试验渗透参数反演

高压压水试验过程中岩体易发生水力劈裂产生裂隙,岩体内部孔隙、裂隙双重导水,渗流场和应力场相互作用,导致岩体渗透参数的时空变异性。基于高压压水试验反演渗透参数需考虑双重介质渗流-应力耦合作用下产生裂隙前后渗透系数的变化规律,利用渗流-应力耦合数值模型结合工程现场高压压水试验数据进行参数反演,计算得到不同压力阶段下灰岩岩体渗透率。主要结论如下:发生水力劈裂前,随着注液压力的增大,渗透率及孔隙水压力在不同压力阶段之间分界明显,渗透率反演值与规程公式计算值相近;发生水力劈裂后,岩体渗透率增大约2倍,孔隙介质渗透率和通过的流量出现陡减现象。

隧道突涌水灾害缩尺物理模型试验研究综述

随着我国经济的快速发展,隧道工程建设越来越多地面临着大埋深、高地应力、高地温、高渗透压力等复杂地质环境,运用物理模型试验开展复杂环境下隧道突涌水灾变机理与安全防控研究已成为岩石力学的热点问题。结合近年来国内外针对隧道突涌水灾变缩尺物理模型试验开展的研究工作,重点对该类物理模型的流固耦合相似理论、相似材料研制、渗透压加载方法等内容进行了系统梳理,并对下一步的可能发展方向进行展望。参考部分文献和突水典型案例后,总结了流固耦合相似准则和高地应力下的相似准则、相似材料选用方案及材料配比、试验中的水压加载方案,认为未来关注的重点包括考虑温度场的物理模型试验相似准则的研究和涌水涌泥与突水突泥间渐变过程的研究2个方面。

工程尺度缓冲材料热-水-力多场耦合数值模拟研究

缓冲材料作为填充在废物罐与地质体之间重要的人工屏障,对高放废物处置库的长期安全至关重要。以工程尺度缓冲材料热-水-力多场耦合大型模型试验系统(China-Mock-up)为研究对象,采用有限元数值模拟软件LAGAMINE,考虑试验过程中复杂的边界条件与材料属性,实现了近5 a试验数据的定量模拟。模拟结果可准确预测试验系统内部不同特征点温度随室温周期性波动及线性增长这一动态变化规律;能够较好反映不同特征点相对湿度随时间的行为演化趋势,在加热器附近区域呈现出先干燥后饱和的现象,远离加热器区域则逐渐增大;模拟的总应力与实测试验数据间表现较好地一致性,能够反映试验台架内部不同特征点的总应力随时间逐渐增大这一演化过程。揭示了多场耦合条件下缓冲材料(膨润土)温度、湿度及应力的相互作用关系,为深入认识处置库环境下缓冲材料行为演化特征提供了重要的参考依据。

仅线圈式电磁超声检测方法与提离特性研究

针对传统永磁体式或脉冲电磁铁式电磁超声换能器(Electromagnetic Acoustic Transducer,EMAT)易吸附铁磁性颗粒导致换能效率下降甚至功能性损坏、难与铁磁性金属材料实现快速分离或移动、探头体积大、难以实现狭小区域等探头不可达区域的检测等难题,提出了一种仅线圈式电磁超声检测的技术实现与建模方法。建立了集仅线圈式EMAT的激励等效电路和检测过程的场路耦合分析有限元模型,分析了仅线圈式EMAT的纵波激励和接收机理,研究了提离对EMAT线圈的等效阻抗、放电电流的高频成分和类直流成分、检测回波的幅值和中心频率的影响。研制了仅线圈式EMAT检测电路,验证了提离的影响规律。研究结果表明:所研制的仅线圈式电磁超声检测系统可以在80 mm厚的铝合金试样中激励和接收纵波,且在0.1 mm提离时,一次底波的信噪比为28.10 dB。当提离由0.1 mm增加至1.0 mm时,二次底波的信噪比由22.21 dB减小至8.01 dB,其中心频率由1.35 MHz下降为1.27 MHz。