AN EXPERIMENTAL STUDY ON TURBULENT COHERENT STRUCTURES NEAR A SHEARED AIR-WATER INTERFACE

The turbulence structures near a sheared air-water interface were experimentally investigated with the hydrogen bubble visualization technique. Surface shear was imposed by an airflow over the water flow which was kept free from surface waves. Results show that the wind shear has the main influence on coherent structures under air-water interfaces. Low- and high- speed streaks form in the region close to the interface as a result of the imposed shear stress. When a certain airflow velocity is reached, “turbulent spots” appear randomly at low-speed streaks with some characteristics of hairpin vortices. At even higher shear rates, the flow near the interface is dominated primarily by intermittent bursting events. The coherent structures observed near sheared air-water interfaces show qualitative similarities with those occurring in near-wall turbulence. However, a few distinctive phenomena were also observed, including the fluctuating thickness of the instantaneous boundary layer and vertical vortices in bursting processes, which appear to be associated with the characteristics of air-water interfaces.

Fractal Description of the Shearing-Surface of Tools

In this paper, the basic methods are introduced to calculate the fractaldimensions of the shearing surface of some tools. The fractal dimension of the shearing surface ofexperimental sampling is obtained and the fractal characteristics are also discussed. We can applythe fractal method to identify types of tools used by burglars and to do the job of individualrecognition. New theories and methods are provided to measure and process the shearing surfaceprofile of tools.

Modeling of Mechanical Behavior of Fractal Rock Joint

The present study shows that naturally developed fracture surfaces in rocks display the properties of self-affine fractals. Surface roughness can be quantitatively characterized by fractal dimension D and the intercept A on the log-log plot of variance: the former describes the irregularity and the later is statistically analogues to the slopes of asperities. In order to confirm the effects of these fractalparameters on the properties and mechanical behavior of rock joints, which have been observed in experiments under both normal andshear loadings, a theoretic model of rock joint is proposed on the basis of contact mechanics. The shape of asperity at contact is assumed to have a sinusoidal form in its representative scale r, with fractal dimension D and the intercept A. The model considers different local contact mechanisms, such as elastic deformation, frictional sliding and tensile fracture of the asperity. The empirical evolution law of surface damage developed in experiment is implemented into the model to up-date geometry of asperity in loading history. The effects of surface roughness characterized by D, A and re on normal and shear deformation of rock joint have been elaborated.

Effects of asymmetric rolling process on ridging resistance of ultra-purified 17%Cr ferritic stainless steel

In ferritic stainless steels, a significant non-uniform recrystallization orientation and a substantial texture gradient usually occur, which can degrade the ridging resistance of the final sheets. To improve the homogeneity of the recrystallization orientation and reduce the texture gradient in ultra-purified 17%Cr ferritic stainless steel, in this work, we performed conventional and asymmetric rolling processes and conducted macro and micro-texture analyses to investigate texture evolution under different cold-rolling conditions. In the conventional rolling specimens, we observed that the deformation was not uniform in the thickness direction, whereas there was homogeneous shear deformation in the asymmetric rolling specimens as well as the formation of uniform recrystallized grains and random orientation grains in the final annealing sheets. As such, the ridging resistance of the final sheets was significantly improved by employing the asymmetric rolling process. This result indicates with certainty that the texture gradient and orientation inhomogeneity can be attributed to non-uniform deformation, whereas the uniform orientation gradient in the thickness direction is explained by the increased number of shear bands obtained in the asymmetric rolling process.

Windtunnel studies of surface shear stress vector distribution measurement using shear sensitive liquid crystal coatings

Shear sensitive liquid crystal coating (SSLCC) can measure surface shear stress vector distribution efficiently with a high spa-tial resolution. The purpose of the present paper is to modify and extend the surface shear stress measurement technique de-termined by Reda et al. to wind tunnel studies. All the facilities employed in the technique are very common and simple. The measurement technique is applied to surface flow beneath a tangential jet and surface flow in a turbulence wedge generated by a small cylinder in windtunnel flow. Spatially resolved shear stresses over planar surface are obtained, although the magnitude is not fully calibrated.

Scattering of steady cross-plane shear waves by surfaces of arbitrary shape in homogeneous and transversely isotropic media

Two-dimensional scalar equation for the displacement of steady cross-plane shear (SH) waves in homogeneous and transversely isotropic media like unidirectional fibrous com-posites is given. Then, thrbugh a simple coordinate system transform, the scalar equation is standardized into a Helmholtz equation. Corresponding integral equations are derived for the scattering problems and boundary element method (BEM) is used to calculate the scattered fields of arbitrarily shaped obstacles with both soft and rigid boudary conditions numerically.A discussion is given on the numerical results which is mainly focused on the influence of the a-nisotropy of the media to the directivity of the scattered fields by circular cylindrical voids.

Shear Model of Metal Melt Flowing on Vibration Wall and Effect of Shear Stress on Solidification Microstructure

In this work,the shear model of metal melt flowing on vibration surface is established,and coupling effects of vibration and shear on the distribution of shear stress in melt and melt solidification microstructure are analyzed.Calculation results show that the transition of melt from laminar flow to turbulent flow occurs earlier with increasing vibration frequency and vibration amplitude.In the laminar flow melt,shear stress in melt decreases with increasing vertical length,but it decreases firstly and then stabilizes with increasing flow length.In the turbulent flow melt,shear stress decreases firstly and then stabilizes with increasing vertical length,but it increases with increasing flow length.With the increase in vibration frequency and amplitude,shear stress along flow direction in laminar flow melt increases,while shear stresses along both flow direction and vertical direction in turbulent flow melt increase.Shear stress in melt decreases with increasing length along vertical direction.With the increase in flow length,shear stress decreases firstly and then stabilizes in laminar flow melt,while it increases in turbulent flow melt.With the increase in vibration frequency and amplitude,shear stress increases in laminar flow melt,while it stabilizes in turbulent flow melt.Based on theoretical calculation,the maximum shear stress in melt during vibration shear flow is always much lower than the yield strength of a-Al grain,so the shear stress induced by vibration shear flow cannot break columnar crystal,which agrees with the experiment result.So,the model can explain the shear constitutive relation of melt flow on vibration surface relatively well.

Plasticityimprovement of a Zr-based bulk metallic glass by micro-arc oxidation

Mciro-arc oxidation（MAO）was used to coat porous films on the surface of a Zr-based bulk metallic glass sample.The compressive test results indicated that,compared with the as-cast sample,the MAO treated one exhibited higher deformation capacity,associated with multiple shear bands with higher density on the side surface and well-developed vein patterns with smaller size on the fractured surface.The pore in the MAOed film and the matrix/coating interface initiated the shear bands and impeded the rapid propagation of shear bands,thus favoring the enhanced plasticity of the MAO treated sample.The obtained results demonstrated that MAO can be considered as an effective method to finely tune the mechanical performance of monolithic bulk metallic glasses.