The phenolic resin-chloroprene nthher was used for sandwich in manufueturing the vibra-tion damping laminated steel sheet (also calied laminated sheet), Il is a metal matrix com-posite. The tensie-shear tests have bee...The phenolic resin-chloroprene nthher was used for sandwich in manufueturing the vibra-tion damping laminated steel sheet (also calied laminated sheet), Il is a metal matrix com-posite. The tensie-shear tests have been conducted over a range of temperatures from 20C to 150C and at the strain rates from 1.67× 10 ^(5) to 1.67× 10^(-2)s^(-1). The results show that test temperature will significaiilly affect the tensile shear strength of laminated sheet. and a minimal strength and a minimal activation energy occur near 80C . The tensile-shear breaking morphology of laminated sheet varies with strain rate and test temjteralurc.展开更多
Recently, laser cutting technologies begin to use for manufacturing mechanical parts of Inconel super-alloy sheet due to difficulties of machining of the Inconel material as a results of its extremely tough nature. Th...Recently, laser cutting technologies begin to use for manufacturing mechanical parts of Inconel super-alloy sheet due to difficulties of machining of the Inconel material as a results of its extremely tough nature. The objective of this work is to investigate the influence of cutting parameters on surface characteristics of the cut section in the cutting of Inconel 718 super-alloy sheet using CW Nd:YAG laser through laser cutting experiments. Normal cutting experiments were performed using a laser cutting system with six-axis controlled automatic robot and auto-tracking system of the focal distance. From the results of the experiments, the effects of the cutting parameters on the surface roughness, the striation formation and the microstructure of the cut section were examined. In addition, an optimal cutting condition, at which the surface roughness is minimized and both the delayed cutting phenomenon and the micro-cracking are not initiated, is estimated to improve both the part quality and the cutting efficiency.展开更多
文摘The phenolic resin-chloroprene nthher was used for sandwich in manufueturing the vibra-tion damping laminated steel sheet (also calied laminated sheet), Il is a metal matrix com-posite. The tensie-shear tests have been conducted over a range of temperatures from 20C to 150C and at the strain rates from 1.67× 10 ^(5) to 1.67× 10^(-2)s^(-1). The results show that test temperature will significaiilly affect the tensile shear strength of laminated sheet. and a minimal strength and a minimal activation energy occur near 80C . The tensile-shear breaking morphology of laminated sheet varies with strain rate and test temjteralurc.
基金Project supported by a grant-in-aid of Regional Innovation Center (RIC),New Technology Development and Research Center of Laser Application in Chosun University,Korea
文摘Recently, laser cutting technologies begin to use for manufacturing mechanical parts of Inconel super-alloy sheet due to difficulties of machining of the Inconel material as a results of its extremely tough nature. The objective of this work is to investigate the influence of cutting parameters on surface characteristics of the cut section in the cutting of Inconel 718 super-alloy sheet using CW Nd:YAG laser through laser cutting experiments. Normal cutting experiments were performed using a laser cutting system with six-axis controlled automatic robot and auto-tracking system of the focal distance. From the results of the experiments, the effects of the cutting parameters on the surface roughness, the striation formation and the microstructure of the cut section were examined. In addition, an optimal cutting condition, at which the surface roughness is minimized and both the delayed cutting phenomenon and the micro-cracking are not initiated, is estimated to improve both the part quality and the cutting efficiency.