The biaxial tensile tests were carried out to investigate the deformation behavior and yield loci of dual-phase (DP) steel sheets under biaxial tensile conditions. The true stress-true strain curves of DP steel shee...The biaxial tensile tests were carried out to investigate the deformation behavior and yield loci of dual-phase (DP) steel sheets under biaxial tensile conditions. The true stress-true strain curves of DP steel sheets for different loading ratios were obtained, and the experimental yield loci were determined based on the equivalent plastic work principle. The experimental yield loci were compared to the theoretical yield loci based on Hi1148, Hi1190, Hi1193, Hosford, Barlat89, Yld2000-2d and Gotoh yield criteria. It is found that Yld2000-2d yield criterion can describe the general trends of experimental yield loci of DP steel sheets with comparably higher accuracy. Hosford criterion has the maximum error for DP590, whereas Hi1148 and Barlat89 have the maximum errors for DP780 and DP980.展开更多
Plane-strain forming limit strain (also known as FLD0) is an important data point on a forming limit diagram (FLD). The effects of friction coefficients and material parameters on the specimen width associated wit...Plane-strain forming limit strain (also known as FLD0) is an important data point on a forming limit diagram (FLD). The effects of friction coefficients and material parameters on the specimen width associated with the FLDo (W FLD0) in Marciniak test were studied by finite element simulation. WFLD0 was expressed as a function of the Lankford coefficients, n-value, k-value and sheet thickness and validated with various sheet materials. The determination of W FLD0 is of significance not only to reduce iterative attempts to accurately obtain FLDo, but also to obtain a full valid FLD with the least number of test specimens, which largely increases the efficiency and reduces cost to experimentally measure valid FLDs.展开更多
基金This research was funded by National Natural Science Foundation of China (51275026) and State Key Laboratory of Development and Application Technology of Automotive Steels (Bao Steel Y 12ECEQ07Y).
文摘The biaxial tensile tests were carried out to investigate the deformation behavior and yield loci of dual-phase (DP) steel sheets under biaxial tensile conditions. The true stress-true strain curves of DP steel sheets for different loading ratios were obtained, and the experimental yield loci were determined based on the equivalent plastic work principle. The experimental yield loci were compared to the theoretical yield loci based on Hi1148, Hi1190, Hi1193, Hosford, Barlat89, Yld2000-2d and Gotoh yield criteria. It is found that Yld2000-2d yield criterion can describe the general trends of experimental yield loci of DP steel sheets with comparably higher accuracy. Hosford criterion has the maximum error for DP590, whereas Hi1148 and Barlat89 have the maximum errors for DP780 and DP980.
文摘Plane-strain forming limit strain (also known as FLD0) is an important data point on a forming limit diagram (FLD). The effects of friction coefficients and material parameters on the specimen width associated with the FLDo (W FLD0) in Marciniak test were studied by finite element simulation. WFLD0 was expressed as a function of the Lankford coefficients, n-value, k-value and sheet thickness and validated with various sheet materials. The determination of W FLD0 is of significance not only to reduce iterative attempts to accurately obtain FLDo, but also to obtain a full valid FLD with the least number of test specimens, which largely increases the efficiency and reduces cost to experimentally measure valid FLDs.