Study on the Structures and Properties of Copper Removal Adsorbent Prepared from Sinter-free Pulverized Oyster Shell Materials

A hollow tubular copper removal adsorbent was prepared with oyster shell and cement as the main raw materials. The effects of different formulas, different initial copper concentrations and different pH values of samples on the copper removal efficiency were investigated to determine the optimal conditions for copper removal. The content of copper in the wastewater is determined by Atomic Absorption Spectrophotometer. The microstructure and elemental composition of the samples were characterized by scanning electron microscopy（SEM） and EDS. As a result, the formula with the content of cement to be 8 wt% and the oyster shell powder of 92 wt% is optimal. Under the condition of 30 ℃, when the pH value was 9.0, the Cu2＋ adsorption capacity of the sample could reach 0.59 mg/g at 48 h. SEM analysis revealed that there are abundant pores in the sample, which is beneficial for Cu2＋ absorption on the adsorbent.

Structure and Property Characterization of Oyster Shell Cementing Material

Oyster shell powder was used as the admixture of ordinary portland cement.The effects of different addition amounts and grinding ways on the strength and stability of cement mortar were discussed and proper addition amount of oyster shell powder was determined.The structure and property changes of cementing samples with different oyster shell powder contents were tested by XRD and SEM means.The results revealed that compressive and rupture strengths of the sample with 10% oyster shell powder was close to those of the original one without addition.Stability experiment showed that the sample prepared by pat method had smooth surface without crack and significant expansion or shrinkage after pre-curing and boiling,which indicated that cementing material dosed with oyster shell powder had fine stability.XRD and SEM observation showed that oyster shell independently exists in the cementing material.

Biological oyster shell waste enhances polyphenylene sulfide composites and endows them with antibacterial properties

To date,there is no research that deals with biological waste as fillers in polyphenylene sulfide(PPS).In this study,oyster shells were recycled and treated to prepare thermally-treated oyster shells(TOS),which were used as PPS fillers to make new bio-based antibacterial composite materials.The effect of varying the content of TOS was studied by means of structure and performance characterization.PPS/TOS composites were demonstrated to have an antibacterial effect on the growth of E coli and S.aureus.Qualitative analysis showed that when the TOS content was≥30%and 40%,the composite materials had an apparent inhibition zone.Quantitative analysis showed that the antibacterial activity increased with the TOS content.Fourier transform infrared spectroscopy indicated the formation of hydrogen bonds between the molecular chains of TOS and PPS and the occurrence of a coordination reaction.At 10%TOS,the composite tensile strength reached a maximum value of 72.5 MPa,which is 9.65%higher than that of pure PPS.The trend of bending properties is the same as that of tensile properties,showing that the maximum property was reached for the composite with 10%TOS.At the same time,the crystallinity and contact angle were the highest,and the permeability coefficient was the lowest.The fatigue test results indicated that for the composite with 10%TOS,the tensile strength was 23%lower than static tensile strength,and the yield strength was 10%lower than the static yield strength.The results of the study showed that TOS not only could reduce the cost of PPS,but also could impart antibacterial properties and enhance the mechanical and,barrier properties,the thermostability,as well as the crystallinity.

Preparation of Multifunctional β-hemihydrate Gypsum using Oyster Shell Powder as the Partial Replacement of Ag/TiO2 Particle

This work aimed to use oyster shell powder (OSP) as the partial replacement of Ag/TiO2 particle to obtain multifunctional β-hemihydrate gypsum.Thus,the β-hemihydrate gypsum was mixed with different contents of OSP and Ag/TiO2 particle.Antibacterial and MB removal experiments were conducted to assess the antibacterial characteristic and photocatalytic activity of β-hemihydrate gypsum with Ag/TiO2 particle and OSP.Besides,the formaldehyde degradation test was carried out to evaluate its formaldehyde removal ratio.Moreover,their setting times,compressive and flexural strengths at 1,3,and 28 days were comparatively analyzed.The experimental results prove that the composite use of OSP and Ag/TiO2 particle provide feasible multifunction for the β-hemihydrate gypsum.They can further improve the bactericidal rates and exhibit extra MB removal ratios compared with the gypsum plasters with single Ag/TiO2 particle.Besides,they can increase the formaldehyde degradation ratios,and this promotion is related to the introduction of Ag/TiO2 particle.However,OSP delays the initial setting time but promotes the final setting time of β-hemihydrate gypsum,and Ag/TiO2 particle hardly affects the setting times.Furthermore,OSP reduces the strengths of plasters at 1,3,and 28 days.But in general,the composite addition of OSP and Ag/TiO2 particle increase the compressive and flexural strengths of gypsum plasters at 1,3,and 28 days.These results provide theoretical guidance for the recycling of OSP and the preparation of gypsum-based products with antibacterial and formaldehyde degradation capabilities.

Preparation of Iron-Pillared Bentonite/Oyster Shell Composite and Phosphate Adsorption in Water

Iron-pillared bentonite(FB)was prepared by Fe(III)modified bentonite,and then the composites(FB-OS)were prepared by iron-pillared bentonite and oyster shell powder.The composites were characterized by FTIR,SEM,TGA,and EDS,and the phosphorus removal test was carried out.The results showed that FB-OS contained a large amount of CaO.Its structure was compact,but there were gaps in it.The maximum bending stress and compressive strength were 43.7 N and 0.927 MPa,respectively.The phosphorus removal test showed that the phosphorus removal rate of FB-OS was more than 90%,and measured the maximum adsorption capacity was 48.31 mg/g.A large amount of spherical products were produced on the surface and inside of FB-OS after phos-phorus removal,it was speculated that spherical products were amorphous calcium phosphate in the paper.Ana-lysis indicated that there was chemical adsorption during phosphorus removal.The kinetic equation of phosphorus adsorption by FB-OS was qt=10:193t/1+2:574t (R^(2)=0.995).The adsorption rate was mainly controlled by outerfilm diffusion and intraparticle diffusion.

Preparation of Magnesia Insulation Materials by Walnut Shell Powder Impregnated with Silica Sol

In order to reduce the thermal energy loss of high temperature kilns and furnaces and lower the surface temperature of the kiln body,magnesia insulation materials were prepared using self-made magnesia porous aggregates(using high purity magnesia powder as starting material and potassium oleate as the foaming agent),middle grade magnesia powder,calcium aluminate cement,and SiO_(2) micropowder as starting materials,introducing walnut shell powder impregnated with silica sol(short for Sws)as a pore-forming agent.The effects of the Sws addition(0,10%,15%,and 20%,by mass)and the sintering temperature(1300,1350,1400,and 1480℃)on the properties of magnesia insulation materials were studied.The results show that(1)for the specimens fired at 1480℃,when the Sws addition is 10%,the cold compressive strength is 22 MPa;when the Sws addition is 20%,the thermal conductivity is 0.368 W·m^(-1)·K^(-1)(350℃);(2)nano-silica in the silica sol reacts with MgO in the matrix to form forsterite,which encapsulates the pores volatilized from the walnut shell powder and forms closed pores.

Synthesis of Calcium Hexaluminate from Waste Slag of Aluminum and Oyster Shell

Waste aluminum slag and oyster shell were used as raw materials to synthesize calcium hexaluminate（CA6）. The effects of different source materials of CaO and sintering temperature on the structures and properties of CA6 were investigated,respectively. The results show that compared to calcium oxide,oyster shell can lower the formation temperature of CA6,hence CA6 can be detected at 1300 ℃ by using oyster shell as the starting raw materials. Increasing the sintering temperature can promote the crystal growth. CA6 crystals show typical platelet shape,and its optimum sintering temperature falls in the 1450～1550 ℃ region. The bulk density is 1.54～1.83 g/cm^3,the apparent porosity is 44.1～55.2% and the flexural strength is 10.8～25.3 MPa.

Effect of Groundnut Shell Powder on the Mechanical Properties of Recycled Polyethylene and Its Biodegradability

Natural fiber reinforced composites have gained considerable attention particularly in the manufacturing industry owing to their light weight, corrosion resistance, abundance, and biodegradability. In this work, alkaline treated and untreated groundnut shell powder (GSP) was used to reinforce recycled polyethylene to produce GSP-recycled polyethylene composites with improved mechanical properties and biodegradability. GSP with particle sizes of 0 - 300 μm and 300 - 600 μm was used in different proportions: 5%, 10%, 15%, 20%, 25%, and 30% wt. The fiber was immersed for 5 hours in a 10 wt% NaOH solution. Tensile and hardness test data showed an improvement in mechanical properties of the treated fiber composites. Results of water absorption test also showed that treated GSP-recycled polyethylene composites had a lower rate of water absorption than the untreated GSP-recycled polyethylene composites. Through Fourier transform infrared spectroscopy, disappearance of characteristics peaks of hemicellulose and lignin was observed. Growth of fungi on the fiber-reinforced composites was observed, which was evidence that GSP-recycled polyethylene composite was biodegradable. Finally, SEM micrographs showed uniform distribution of treated fibers in the polymer matrix;this explained the observed improvement in the mechanical properties of treated GSP-recycled polyethylene composites.

A Comparative Study of Intensive Litopenaeus vannamei Culture on Four Bottom Substrates Without Water Change

The effect of four bottom substrates, oyster shell powder(OP), sugarcane bagasse(SB), a mixture of OP and SB(OS) and fresh soil(FS), on the water quality and bacterial and zooplankton density of intensive shrimp(Litopenaeus vannamei) culture tanks without water change and the growth performance of cultured shrimp were compared in this study. At the end of a 110 days culturing trial, the total ammonium-N(TAN) of the water on SB and the nitrite nitrogen(NO2-N) on OS was significantly lower than that on the other substrates(P<0.05), which coincided with the high density of ammonium- and nitrite-oxidizing bacteria in the water on SB and OS, respectively. The concentration of chlorophyll a(Chl a) increased slowly on OP, SB and OS but remained low on FS. The density of total bacteria on OP, SB and OS was one order of magnitude higher than that on FS, and the density of zooplankton on SB and OS was significantly higher than that on FS or OP(P<0.05). The improved water quality and increased density of bacteria and zooplankton on SB and OS may have had a synergistic effect on shrimp culture, improving its growth performance(high survival rate and yield and low feed conversion rate). SB and OS were more effective for improving the growth performance of intensively cultured L. vannamei without water change than OP and FS. To our knowledge, this study presents the first evidence regarding the effect of different bottom substrates on intensive shrimp culture.

Modification of tamarind fruit shell powder with in situ generated copper nanoparticles by single step hydrothermal method

Tamarind fruit shell powder(TFSP)with particle size of<50μm(obtained from cleaned tamarind fruit shells)was modified with in situ generated copper nanoparticles(CuNPs)by simple one step hydrothermal method.The modified TFSP was characterized by scanning electron microscope(SEM),Fourier transform infrared(FT-IR)spectroscopy,X-ray diffraction(XRD),thermogravi-metric analysis(TGA)and antibacterial tests.The generated stable CuNPs on the surface of the modified TFSP were spherical in shape with an average size of 88 nm.The FT-IR spectroscopy analysis indicated the involvement of the functional groups of the TFSP in the generation and stabilization of the CuNPs.The XRD analysis indicated the presence of both CuNPs and Cu 2 O nanoparticles in the modified TFSP.The thermal analysis indicated the presence of 5.6 wt%of copper nanoparticles as calculated from the difference of residual char content between the un-modified and modified TFSP.The modified TFSP with in situ generated CuNPs exhibited obvious antibacterial activity against both the Gram negative and Gram positive bacteria and hence can be considered as low cost filler in the preparation of antibacterial polymer hybrid nanocomposites for packaging and medical applications.