The effects of Ce on reduction of non-chromium iron based CO shift catalyst were studied by XRD, TPR, SEM and XPS. The results show that Ce refines Fe2O3 grains and riches on the surface of catalyst in the process of ...The effects of Ce on reduction of non-chromium iron based CO shift catalyst were studied by XRD, TPR, SEM and XPS. The results show that Ce refines Fe2O3 grains and riches on the surface of catalyst in the process of reduction, which leads to decrease of the initial reductive temperature and increase of the final reductive temperature.展开更多
This paper presents the performance and characteristics of new-type sulfur tolerant shift catalyst QDB-04 and its industrial side-line test as well as the first-time industrial application in Lunan Chemical Fertilizer...This paper presents the performance and characteristics of new-type sulfur tolerant shift catalyst QDB-04 and its industrial side-line test as well as the first-time industrial application in Lunan Chemical Fertilizer Plant of Shandong in China. The results show that the catalyst has high strength and strength stability, good low temperature activity and stability as well as low potassium bleeding ratio which well meet for the requirements of the methanol plant on catalyst performance in Lunan Chemical Fertilizer Plant.展开更多
Water-gas shift reaction catalyst at lower temperature (200-400 ℃) may improve the conversion of carbon monoxide. But carbonyl sulfide was found to be present over the sulfided cobaltmolybdenum/alumina catalyst for...Water-gas shift reaction catalyst at lower temperature (200-400 ℃) may improve the conversion of carbon monoxide. But carbonyl sulfide was found to be present over the sulfided cobaltmolybdenum/alumina catalyst for water-gas shift reaction. The influences of temperature, space velocity, and gas components on the formation of carbonyl sulfide over sulfided cobalt-molybdenum/alumina catalyst B303Q at 200-400 ℃ were studied in a tubular fixed-bed quartz-glass reactor under simulated water-gas shift conditions. The experimental results showed that the yield of carbonyl sulfide over B303Q catalyst reached a maximum at 220 ℃ with the increase in temperature, sharply decreased with the increase in space velocity and the content of water vapor, increased with the increase in the content of carbon monoxide and carbon dioxide, and its yield increased and then reached a stable value with the increase in the content of hydrogen and hydrogen sulfide. The formation mechanism of carbonyl sulfide over B303Q catalyst at 200-400 ℃ was discussed on the basis of how these factors influence the formation of COS. The yield of carbonyl sulfide over B303Q catalyst at 200-400 ℃ was the combined result of two reactions, that is, COS was first produced by the reaction of carbon monoxide with hydrogen sulfide, and then the as-produced COS was converted to hydrogen sulfide and carbon dioxide by hydrolysis. The mechanism of COS formation is assumed as follows: sulfur atoms in the Co9Ss-MoS2/Al2O3 crystal lattice were easily removed and formed carbonyl sulfide with CO, and then hydrogen sulfide in the water-gas shift gas reacted with the crystal lattice oxygen atoms in CoO-MoOa/Al2O3 to form Co9S8-MoS2/Al2O3. This mechanism for the formation of COS over water-gas shift catalyst B303Q is in accordance with the Mars-Van Krevelen's redox mechanism over metal sulfide.展开更多
Based on formate and direct oxidation mechanisms,three Langmuir-Hinshelwood-Hougen-Watson (LHHW) kinetic models of the water-gasshift (WGS) reaction over a nano-structured iron catalyst under Fischer-Tropsch synth...Based on formate and direct oxidation mechanisms,three Langmuir-Hinshelwood-Hougen-Watson (LHHW) kinetic models of the water-gasshift (WGS) reaction over a nano-structured iron catalyst under Fischer-Tropsch synthesis (FTS) reaction conditions were derived and compared with those over the conventional catalyst.The conventional and nanostructured Fe/Cu/La/Si catalysts were prepared by co-precipitation of Fe and Cu nitrates in aqueous media and water-oil micro-emulsion,respectively.The WGS kinetic data were measured by experiments over a wide range of reaction conditions and comparisons were also made for various rate equations.WGS rate expressions based on the formate mechanism with the assumption that the formation of formate is rate determining step were found to be the best.展开更多
Cu/CeO2-ZrO2 catalysts for water-gas shift (WGS) reaction were prepared with co-precipitation method, and the influence of ZrO2 content on the catalytic structure and properties was investigated by the techniques of...Cu/CeO2-ZrO2 catalysts for water-gas shift (WGS) reaction were prepared with co-precipitation method, and the influence of ZrO2 content on the catalytic structure and properties was investigated by the techniques of N2 physical adsorption analysis, XRD and H2-TPR. The results indicate that the BET surface areas of the catalysts are increased in varying degrees due to the presence of ZrO2. With increasing ZrO2 content, the pore size distribution is centered on 1.9 nm. ZrO2 can efficiently restrain the growth of Cu crystal particles. The appropriate amount of ZrO2 in the Cu/CeO2 catalysts can help the catalyst keep better copper dispersion in the WGS reaction, which can lead to both higher catalytic activity and better thermal stability. When ZrO2 content is 10% (atom fraction), Cu/CeO2-Zr02 catalyst reaches a CO conversion rate of 73.7% at the reaction temperature of 200℃.展开更多
A study on the magnetic properties and the Mssbauer spectra of the additive aluminum hydroxide has been reported before. In this note, the XPS(X-ray photoelectron spectrometry), TEM(transmission electron microscopy)an...A study on the magnetic properties and the Mssbauer spectra of the additive aluminum hydroxide has been reported before. In this note, the XPS(X-ray photoelectron spectrometry), TEM(transmission electron microscopy)and MACA(micro-area chemical analysis) have been used to investigate the effect of the additive aluminum hydroxide on the physical and surface properties of the iron-chromium high temperature shift catalyst.展开更多
Co-Mo/MgO-Al2O3 catalyst was presulfided with ammonium sulfide in aqueous solution and activated with synthesis gas for water gas shift reaction. The assay results indicate that the presulfided Co-Mo/MgO-Al2O3 catalys...Co-Mo/MgO-Al2O3 catalyst was presulfided with ammonium sulfide in aqueous solution and activated with synthesis gas for water gas shift reaction. The assay results indicate that the presulfided Co-Mo/MgO-Al2O3 catalyst exhibits an excellent catalytic activity and stability. XRD and EPR characterization results show that the O-S exchange might occur during the impregnation, leading to the formation of (NH4)2MoS4 (or (NH4)zMoxSy) precursor, which was then thermally decomposed and reduced to MoS2. The higher catalytic performance is attributed to an optimization formation of active Co-Mo sulfides, consisting of well dispersed MoS2 and Co-Mo-S phase due to the redispersion of Co sulfide particles over the edges of newly formed MoS2 crystallites.展开更多
Co-Mo-based catalysts supported on mixed oxide supports MgO-Al2O3 with different Mg/Al atom ratios for water gas shift reaction were studied by means of TPR, Raman, XPS and ESR. It was found that the octahedral Mo spe...Co-Mo-based catalysts supported on mixed oxide supports MgO-Al2O3 with different Mg/Al atom ratios for water gas shift reaction were studied by means of TPR, Raman, XPS and ESR. It was found that the octahedral Mo species in oxidized Co-Mo/MgO(x)-Al2O3 catalyst and the contents of Mo^5+, Mo^4+, S^2- and S^2-2 species in the functioning catalysts increased with increasing the Mg/Al atom ratio of the support under the studied experimental conditions. This is favorable for the formation of the active Co-Mo-S phase of the catalysts. Catalytic performance testing results showed that the catalysts Co-Mo/MgO-Al2O3 with the Mg/Al atom ratio of the support in the range of 0.475-0.525 exhibited optimal catalytic activity for the reaction.展开更多
The preparation of the iron-based catalysts promoted by cobalt with a small amount of copper and aluminum for the high temperature shift reaction (HTS) with different sequences of adding catalyst raw materials durin...The preparation of the iron-based catalysts promoted by cobalt with a small amount of copper and aluminum for the high temperature shift reaction (HTS) with different sequences of adding catalyst raw materials during neutralization and precipitation was investigated. XRD, BET and particle size distribution (PSD) were used to characterize the prepared catalysts. It was found that the catalyst crystals were all γ-Fe2O3, and the intermediate of the catalyst after aging was Fe3O4. The crystallographic form of the catalyst and its intermediate was not affected by the addition sequence in the neutralization and precipitation process. The results showed that the specific surface area and the particle size of the catalysts depended on the addition sequence to the mother liquor. Cobalt with a small amount of copper and aluminum could increase the specific surface area and decrease the particle size of catalysts.展开更多
This paper presented a study on the role of yttrium addition to CuO/CeO2 catalyst for water-gas shift reaction. A single-step co-precipitation method was used for preparation of a series of yttrium doped CuO/CeO2 cata...This paper presented a study on the role of yttrium addition to CuO/CeO2 catalyst for water-gas shift reaction. A single-step co-precipitation method was used for preparation of a series of yttrium doped CuO/CeO2 catalysts with yttrium content in the range of 0-5wt.%. Properties of the obtained samples were characterized and analyzed by X-ray diffraction (XRD), Raman spectroscopy, H2-TPR, cyclic voltammetry (CV) and the BET method. The results revealed that catalytic activity was increased with the yttrium content at first, but then decreased with the further increase of yttrium content. Herein, CuO/CeO2 catalyst doped with 2wt.% of yttrium showed the highest catalytic activity (CO conversion reaches 93.4% at 250 ℃) and thermal stability for WGS reaction. The catalytic activity was correlated with the surface area, the area of peak γ of H2-TPR profile (i.e., the reduction of surface copper oxide (crystalline forms) interacted with surface oxygen vacancies on ceria), and the area of peak C2 and A1 (Cu^0→←Cu^2+ in cyclic voltammetry process), respectively. Besides, Raman spectra provided evidences for a synergistic Cu-Ovacancy interaction, and it was indicated that doping yttrium may facilitate the formation of oxygen vacancies on ceria.展开更多
The effect of potassium-decoration was studied on the activity of water-gas shift (WGS) reaction over the Co-Mo-based catalysts supported on active carbon (AC), which was prepared by incipient wetness co-impregnat...The effect of potassium-decoration was studied on the activity of water-gas shift (WGS) reaction over the Co-Mo-based catalysts supported on active carbon (AC), which was prepared by incipient wetness co-impregnation method. The decoration of potassium on active carbon in advance enhances the activities of the CoMo-K/AC catalysts for WGS reaction. Highest activity (about 92% conversion) was obtained at 250 ? C for the catalyst with an optimum K 2 O/AC weight ratio in the range from 0.12 to 0.15. The catalysts were characterized by TPR and EPR, and the results show that activated carbon decorated with potassium makes Co-Mo species highly dispersed, and thus easily reduced and sulfurized. XRD results show that an appropriate content of potassium-decoration on active carbon supports may favors the formation of highly dispersed Co 9 S 8 -type structures which are situated on the edge or a site in contact with MoS 2 , K-Mo-O-S, Mo-S-K phase. Those active species are responsible for the high activity of CoMo-K/AC catalysts.展开更多
Based on water-gas shift reaction mechanism and perovskite compounds characteristics, La_(1- x )Ce_ x FeO_3 (.K) perovskite were designed and prepared as shift catalysts. DTA and XRD results reveal that La_(1- x )Ce_ ...Based on water-gas shift reaction mechanism and perovskite compounds characteristics, La_(1- x )Ce_ x FeO_3 (.K) perovskite were designed and prepared as shift catalysts. DTA and XRD results reveal that La_(1- x )Ce_ x FeO_3 can be formed at 730~760 ℃ by mechanic-mix thermal decomposition method. Activity and heat-resisting tests show that La_(1- x )Ce_ x FeO_3 ((.K)) possess high thermal stability if x is less than or equals to 0.5. But when x is greater than 0.5, La_(1- x )Ce_ x FeO_3 (.K) will be converted into ceria and magnetite partially or completely under shift reaction conditions. In the case of x =0.5, the conversion of CO is about 68% at 530 ℃. Potassium can greatly improve the low temperature activity, but slightly reduces the high temperature activity, and has little impact on the thermal stability. La_(0.5)Ce_(0.5)FeO_3 (.K) is a promising chromium-free high temperature shift catalyst.展开更多
The perovskite type rare earth iron complex (REIC) oxide La 1-x Ce xFeO 3 is designed and prepared as water gas shift catalyst. Activity evaluation and heat resisting test show that the perovskite type compounds La 1-...The perovskite type rare earth iron complex (REIC) oxide La 1-x Ce xFeO 3 is designed and prepared as water gas shift catalyst. Activity evaluation and heat resisting test show that the perovskite type compounds La 1-x Ce xFeO 3(·K) has a good thermal stability if x is less than or equal to 0.5 . But when x is greater than 0.5 , La 1-x Ce xFeO 3(·K) will turn out to be ceria and magnetite partially or completely at high temperature in the shift reaction atmosphere. In the case of x=0.5, the conversion of carbon monoxide is about 68% at 530 ℃. Potassium can greatly improve the low temperature activity, but slightly lower the high temperature activity, and has little impact on the thermal stability. La 0.5 Ce 0.5 FeO 3 (·K) is a promising chromium free high temperature shift catalyst.展开更多
The effects of Mg,La and Ca promoters on primary and secondary CO2 and H2O formation pathways during Fischer-Tropsch synthesis on precipitated Fe/Cu/SiO2 catalysts are investigated.The chemisorbed oxygen atoms in the ...The effects of Mg,La and Ca promoters on primary and secondary CO2 and H2O formation pathways during Fischer-Tropsch synthesis on precipitated Fe/Cu/SiO2 catalysts are investigated.The chemisorbed oxygen atoms in the primary pathway formed in the CO dissociation steps reacted with co-adsorbed hydrogen or carbon monoxide to produce H2O and CO2,respectively.The secondary pathway was the water-gas shift reaction.The results indicated that the CO2 production led to an increase in both primary and secondary pathways,and H2O production decreased when surface basicity of the catalyst increased in the order Ca 〉 Mg 〉 La.展开更多
文摘The effects of Ce on reduction of non-chromium iron based CO shift catalyst were studied by XRD, TPR, SEM and XPS. The results show that Ce refines Fe2O3 grains and riches on the surface of catalyst in the process of reduction, which leads to decrease of the initial reductive temperature and increase of the final reductive temperature.
文摘This paper presents the performance and characteristics of new-type sulfur tolerant shift catalyst QDB-04 and its industrial side-line test as well as the first-time industrial application in Lunan Chemical Fertilizer Plant of Shandong in China. The results show that the catalyst has high strength and strength stability, good low temperature activity and stability as well as low potassium bleeding ratio which well meet for the requirements of the methanol plant on catalyst performance in Lunan Chemical Fertilizer Plant.
基金the National Basic Research Program of China (No.2005CB221203)
文摘Water-gas shift reaction catalyst at lower temperature (200-400 ℃) may improve the conversion of carbon monoxide. But carbonyl sulfide was found to be present over the sulfided cobaltmolybdenum/alumina catalyst for water-gas shift reaction. The influences of temperature, space velocity, and gas components on the formation of carbonyl sulfide over sulfided cobalt-molybdenum/alumina catalyst B303Q at 200-400 ℃ were studied in a tubular fixed-bed quartz-glass reactor under simulated water-gas shift conditions. The experimental results showed that the yield of carbonyl sulfide over B303Q catalyst reached a maximum at 220 ℃ with the increase in temperature, sharply decreased with the increase in space velocity and the content of water vapor, increased with the increase in the content of carbon monoxide and carbon dioxide, and its yield increased and then reached a stable value with the increase in the content of hydrogen and hydrogen sulfide. The formation mechanism of carbonyl sulfide over B303Q catalyst at 200-400 ℃ was discussed on the basis of how these factors influence the formation of COS. The yield of carbonyl sulfide over B303Q catalyst at 200-400 ℃ was the combined result of two reactions, that is, COS was first produced by the reaction of carbon monoxide with hydrogen sulfide, and then the as-produced COS was converted to hydrogen sulfide and carbon dioxide by hydrolysis. The mechanism of COS formation is assumed as follows: sulfur atoms in the Co9Ss-MoS2/Al2O3 crystal lattice were easily removed and formed carbonyl sulfide with CO, and then hydrogen sulfide in the water-gas shift gas reacted with the crystal lattice oxygen atoms in CoO-MoOa/Al2O3 to form Co9S8-MoS2/Al2O3. This mechanism for the formation of COS over water-gas shift catalyst B303Q is in accordance with the Mars-Van Krevelen's redox mechanism over metal sulfide.
文摘Based on formate and direct oxidation mechanisms,three Langmuir-Hinshelwood-Hougen-Watson (LHHW) kinetic models of the water-gasshift (WGS) reaction over a nano-structured iron catalyst under Fischer-Tropsch synthesis (FTS) reaction conditions were derived and compared with those over the conventional catalyst.The conventional and nanostructured Fe/Cu/La/Si catalysts were prepared by co-precipitation of Fe and Cu nitrates in aqueous media and water-oil micro-emulsion,respectively.The WGS kinetic data were measured by experiments over a wide range of reaction conditions and comparisons were also made for various rate equations.WGS rate expressions based on the formate mechanism with the assumption that the formation of formate is rate determining step were found to be the best.
文摘Cu/CeO2-ZrO2 catalysts for water-gas shift (WGS) reaction were prepared with co-precipitation method, and the influence of ZrO2 content on the catalytic structure and properties was investigated by the techniques of N2 physical adsorption analysis, XRD and H2-TPR. The results indicate that the BET surface areas of the catalysts are increased in varying degrees due to the presence of ZrO2. With increasing ZrO2 content, the pore size distribution is centered on 1.9 nm. ZrO2 can efficiently restrain the growth of Cu crystal particles. The appropriate amount of ZrO2 in the Cu/CeO2 catalysts can help the catalyst keep better copper dispersion in the WGS reaction, which can lead to both higher catalytic activity and better thermal stability. When ZrO2 content is 10% (atom fraction), Cu/CeO2-Zr02 catalyst reaches a CO conversion rate of 73.7% at the reaction temperature of 200℃.
文摘A study on the magnetic properties and the Mssbauer spectra of the additive aluminum hydroxide has been reported before. In this note, the XPS(X-ray photoelectron spectrometry), TEM(transmission electron microscopy)and MACA(micro-area chemical analysis) have been used to investigate the effect of the additive aluminum hydroxide on the physical and surface properties of the iron-chromium high temperature shift catalyst.
文摘Co-Mo/MgO-Al2O3 catalyst was presulfided with ammonium sulfide in aqueous solution and activated with synthesis gas for water gas shift reaction. The assay results indicate that the presulfided Co-Mo/MgO-Al2O3 catalyst exhibits an excellent catalytic activity and stability. XRD and EPR characterization results show that the O-S exchange might occur during the impregnation, leading to the formation of (NH4)2MoS4 (or (NH4)zMoxSy) precursor, which was then thermally decomposed and reduced to MoS2. The higher catalytic performance is attributed to an optimization formation of active Co-Mo sulfides, consisting of well dispersed MoS2 and Co-Mo-S phase due to the redispersion of Co sulfide particles over the edges of newly formed MoS2 crystallites.
文摘Co-Mo-based catalysts supported on mixed oxide supports MgO-Al2O3 with different Mg/Al atom ratios for water gas shift reaction were studied by means of TPR, Raman, XPS and ESR. It was found that the octahedral Mo species in oxidized Co-Mo/MgO(x)-Al2O3 catalyst and the contents of Mo^5+, Mo^4+, S^2- and S^2-2 species in the functioning catalysts increased with increasing the Mg/Al atom ratio of the support under the studied experimental conditions. This is favorable for the formation of the active Co-Mo-S phase of the catalysts. Catalytic performance testing results showed that the catalysts Co-Mo/MgO-Al2O3 with the Mg/Al atom ratio of the support in the range of 0.475-0.525 exhibited optimal catalytic activity for the reaction.
文摘The preparation of the iron-based catalysts promoted by cobalt with a small amount of copper and aluminum for the high temperature shift reaction (HTS) with different sequences of adding catalyst raw materials during neutralization and precipitation was investigated. XRD, BET and particle size distribution (PSD) were used to characterize the prepared catalysts. It was found that the catalyst crystals were all γ-Fe2O3, and the intermediate of the catalyst after aging was Fe3O4. The crystallographic form of the catalyst and its intermediate was not affected by the addition sequence in the neutralization and precipitation process. The results showed that the specific surface area and the particle size of the catalysts depended on the addition sequence to the mother liquor. Cobalt with a small amount of copper and aluminum could increase the specific surface area and decrease the particle size of catalysts.
基金supported by the National Natural Science Foundation of China (20771025)A-type Science and Technology Projects of Fujian Provincial Department of Education (JA08021)
文摘This paper presented a study on the role of yttrium addition to CuO/CeO2 catalyst for water-gas shift reaction. A single-step co-precipitation method was used for preparation of a series of yttrium doped CuO/CeO2 catalysts with yttrium content in the range of 0-5wt.%. Properties of the obtained samples were characterized and analyzed by X-ray diffraction (XRD), Raman spectroscopy, H2-TPR, cyclic voltammetry (CV) and the BET method. The results revealed that catalytic activity was increased with the yttrium content at first, but then decreased with the further increase of yttrium content. Herein, CuO/CeO2 catalyst doped with 2wt.% of yttrium showed the highest catalytic activity (CO conversion reaches 93.4% at 250 ℃) and thermal stability for WGS reaction. The catalytic activity was correlated with the surface area, the area of peak γ of H2-TPR profile (i.e., the reduction of surface copper oxide (crystalline forms) interacted with surface oxygen vacancies on ceria), and the area of peak C2 and A1 (Cu^0→←Cu^2+ in cyclic voltammetry process), respectively. Besides, Raman spectra provided evidences for a synergistic Cu-Ovacancy interaction, and it was indicated that doping yttrium may facilitate the formation of oxygen vacancies on ceria.
文摘The effect of potassium-decoration was studied on the activity of water-gas shift (WGS) reaction over the Co-Mo-based catalysts supported on active carbon (AC), which was prepared by incipient wetness co-impregnation method. The decoration of potassium on active carbon in advance enhances the activities of the CoMo-K/AC catalysts for WGS reaction. Highest activity (about 92% conversion) was obtained at 250 ? C for the catalyst with an optimum K 2 O/AC weight ratio in the range from 0.12 to 0.15. The catalysts were characterized by TPR and EPR, and the results show that activated carbon decorated with potassium makes Co-Mo species highly dispersed, and thus easily reduced and sulfurized. XRD results show that an appropriate content of potassium-decoration on active carbon supports may favors the formation of highly dispersed Co 9 S 8 -type structures which are situated on the edge or a site in contact with MoS 2 , K-Mo-O-S, Mo-S-K phase. Those active species are responsible for the high activity of CoMo-K/AC catalysts.
文摘Based on water-gas shift reaction mechanism and perovskite compounds characteristics, La_(1- x )Ce_ x FeO_3 (.K) perovskite were designed and prepared as shift catalysts. DTA and XRD results reveal that La_(1- x )Ce_ x FeO_3 can be formed at 730~760 ℃ by mechanic-mix thermal decomposition method. Activity and heat-resisting tests show that La_(1- x )Ce_ x FeO_3 ((.K)) possess high thermal stability if x is less than or equals to 0.5. But when x is greater than 0.5, La_(1- x )Ce_ x FeO_3 (.K) will be converted into ceria and magnetite partially or completely under shift reaction conditions. In the case of x =0.5, the conversion of CO is about 68% at 530 ℃. Potassium can greatly improve the low temperature activity, but slightly reduces the high temperature activity, and has little impact on the thermal stability. La_(0.5)Ce_(0.5)FeO_3 (.K) is a promising chromium-free high temperature shift catalyst.
文摘The perovskite type rare earth iron complex (REIC) oxide La 1-x Ce xFeO 3 is designed and prepared as water gas shift catalyst. Activity evaluation and heat resisting test show that the perovskite type compounds La 1-x Ce xFeO 3(·K) has a good thermal stability if x is less than or equal to 0.5 . But when x is greater than 0.5 , La 1-x Ce xFeO 3(·K) will turn out to be ceria and magnetite partially or completely at high temperature in the shift reaction atmosphere. In the case of x=0.5, the conversion of carbon monoxide is about 68% at 530 ℃. Potassium can greatly improve the low temperature activity, but slightly lower the high temperature activity, and has little impact on the thermal stability. La 0.5 Ce 0.5 FeO 3 (·K) is a promising chromium free high temperature shift catalyst.
文摘The effects of Mg,La and Ca promoters on primary and secondary CO2 and H2O formation pathways during Fischer-Tropsch synthesis on precipitated Fe/Cu/SiO2 catalysts are investigated.The chemisorbed oxygen atoms in the primary pathway formed in the CO dissociation steps reacted with co-adsorbed hydrogen or carbon monoxide to produce H2O and CO2,respectively.The secondary pathway was the water-gas shift reaction.The results indicated that the CO2 production led to an increase in both primary and secondary pathways,and H2O production decreased when surface basicity of the catalyst increased in the order Ca 〉 Mg 〉 La.