An internal ballistic model of electromagnetic railgun based on PFN coupled with multi-physical field and experimental validation

To accelerate the practicality of electromagnetic railguns,it is necessary to use a combination of threedimensional numerical simulation and experiments to study the mechanism of bore damage.In this paper,a three-dimensional numerical model of the augmented railgun with four parallel unconventional rails is introduced to simulate the internal ballistic process and realize the multi-physics field coupling calculation of the rail gun,and a test experiment of a medium-caliber electromagnetic launcher powered by pulse formation network(PFN)is carried out.Various test methods such as spectrometer,fiber grating and high-speed camera are used to test several parameters such as muzzle initial velocity,transient magnetic field strength and stress-strain of rail.Combining the simulation results and experimental data,the damage condition of the contact surface is analyzed.

Electromagnetic fields in ultra-peripheral relativistic heavy-ion collisions

Ultra-peripheral heavy-ion collisions(UPCs)offer unique opportunities to study processes under strong electromagnetic fields.In these collisions,highly charged fast-moving ions carry strong electromagnetic fields that can be effectively treated as photon fluxes.The exchange of photons can induce photonuclear and two-photon interactions and excite ions.This excitation of the ions results in Coulomb dissociation with the emission of photons,neutrons,and other particles.Additionally,the electromagnetic fields generated by the ions can be sufficiently strong to enforce mutual interactions between the two colliding ions.Consequently,the two colliding ions experience an electromagnetic force that pushes them in opposite directions,causing a back-to-back correlation in the emitted neutrons.Using a Monte Carlo simulation,we qualitatively demonstrate that the above electromagnetic effect is large enough to be observed in UPCs,which would provide a clear means to study strong electromagnetic fields and their effects.

Flashover Probability of Wind Turbine Blade and Impact of Strong Electromagnetic Pulse from Lightning Strikes on Wind Turbine Safety

This paper systematically studies the flashover probability of wind turbine blade lightning arrester and the impact of strong electromagnetic pulses on the local and surrounding wind turbines during lightning strikes.The research results indicate that the flashover probability of direct lightning strikes by the wind turbine blade lightning arrester is almost negligible,and the strong electromagnetic pulse of wind turbine blade during lightning strikes has a serious impact on the electronic equipment of the machine,while the impact on the surrounding wind turbine is relatively small.At the same time,the calculation formula for the reflection of lightning current on the carbon brush between the wind turbine hub and the engine compartment during the flashing of the wind turbine blades is provided,and the calculation method for calculating the spatial gradient distribution of electromagnetic field intensity using Biot-Savart Law theorem is applied.The limitations of using wind turbine blades for lightning protection are pointed out,and a technical route for achieving wind turbine lightning safety is proposed,which can be used as a reference for wind turbine lightning protection technicians.

Characteristics of electromagnetic vector field generated from rock fracturing

Rock fracturing is often accompanied by electromagnetic phenomenon.As a vector field,in addition to the intensity that is widely concerned,the generated electromagnetic field also has obvious direction-ality.To this end,a set of electromagnetic antennas capable of simultaneous three-axis measurement is used to monitor the electromagnetic vector field generated from rock fracturing based on Brazilian tests.The signal amplitude on each axis can represent the magnitude of actual magnetic flux density component on the three axes.The intensity and directional characteristics of electromagnetic signals received at different positions are studied using vector synthesis.The directionality of electromagnetic radiation measured using a three-axis electromagnetic antenna shows that the direction of the magnetic flux intensity generated by rock fracturing tends to be parallel to the crack surface,and the measured signal intensity is greater in a direction closer to the crack surface.

Long-term radiofrequency electromagnetic fields exposure attenuates cognitive dysfunction in 5×FAD mice by regulating microglial function

We have previously found that long-term effects of exposure to radiofrequency electromagnetic fields in 5xFAD mice with severe late-stage Alzheimer’s disease reduced both amyloid-βdeposition and glial activation,including microglia.To examine whether this therapeutic effect is due to the regulation of activated microglia,we analyzed mic roglial gene expression profiles and the existence of microglia in the brain in this study.5xFAD mice at the age of 1.5 months were assigned to sham-and radiofrequency electromagnetic fields-exposed groups and then animals were exposed to 1950 MHz radiofrequency electromagnetic fields at a specific absorption rate of 5 W/kg for 2 hours/day and 5 days/week for 6 months.We conducted behavioral tests including the object recognition and Y-maze tests and molecular and histopathological analysis of amyloid precursor protein/a myloid-beta metabolism in brain tissue.We confirmed that radiofrequency electromagnetic field exposure for 6 months ameliorated cognitive impairment and amyloid-βdeposition.The expression levels of Iba1(pan-microglial marker)and colony-stimulating factor 1 receptor(CSF1R;regulates microglial prolife ration)in the hippocampus in 5xFAD mice treated with radiofrequency electromagnetic fields were significantly reduced compared with those of the sham-exposed group.Subsequently,we analyzed the expression levels of genes related to mic rogliosis and microglial function in the radiofrequency electromagnetic fields-exposed group compared to those of a CSF1R inhibitor(PLX3397)-treated group.Both radiofrequency electromagnetic fields and PLX3397 suppressed the levels of genes related to microgliosis(Csf1r,CD68,and Ccl6)and pro-inflammatory cytokine interleukin-1β.N otably,the expression levels of genes related to mic roglial function,including Trem2,Fcgr1α,Ctss,and Spi1,were decreased after long-term radiofrequency electromagnetic field exposure,which was also observed in response to microglial suppression by PLX3397.These results showed that radiofrequency electromagnetic fields ameliorated amyloid-βpathology and cognitive impairment by suppressing amyloid-βdeposition-induced microgliosis and their key regulator,CSF1R.

Electric field intensity measurement by using doublet electromagnetically induced transparency of cold Rb Rydberg atoms

We demonstrate a simple method to measure electric field intensity by using doublet electromagnetically induced transparency(EIT) spectra of cold Rb Rydberg atoms, where the frequency of the coupling laser does not need to be locked. Based on the Stark splitting of the Rb Rydberg state, 10D_(3/2), under electric fields and the corresponding calculated polarizabilities, the real electric field intensity is calculated using the difference in radio-frequency diffraction between two acousto-optic modulators, which acts as a frequency criterion that allows us to measure the electrical field without locking the coupling laser. The value measured by this simple method shows a good agreement with our previous work [Opt.Express 29 1558(2021)] where the frequency of the coupling laser needs to be locked with an additional EIT spectrum based on atom vapor and a proportional–integral–differential feedback circuit. Our presented method can also be extended to the measurement of electric field based on hot Rydberg atom vapor, which has application in industry.

Analysis and Simulation of the Influence of Electromagnetic Fields on Living Beings near HV Power Lines Using the FDTD Method

Recent decades have seen rapid advances in the field of electrical engineering, such that our environment has become a sea of electrical and magnetic signals, raising questions about the possible effects of low-frequency electromagnetic fields on the environment and which are capable of modifying and destroying our ecosystem. Particular interest was given in this article due to a massive influx of population living near high voltage lines. The analysis and simulation of the influence of low frequency electromagnetic fields on living beings in the vicinity of high voltage sources 132 kV and 220 kV in urban areas in DR Congo is the subject of our research with a view to estimating the level of exposure of humans to low frequency electromagnetic fields. To carry out our research, we used the classic method of analyzing the field produced near a high voltage line based on Maxwell’s image theory, the Maxwell-Gauss theorem and Maxwell-Ampère theorem to model and quantify low-frequency electromagnetic fields in the vicinity of high-voltage lines. The 2D FDTD numerical formulation was developed from telegraphers’ equations and allowed us to obtain models of current and voltage induced by electromagnetic fields on living beings below and near HV lines. The different simulations carried out on the proposed models illustrate the effects of the electrical and geometric parameters of the pylons on the distribution of the electromagnetic field in the vicinity of the HV lines. The results obtained were compared to the safety limits recommended by the standards.

Effects of 60 Hz electromagnetic field exposure on testiculargerm cell apoptosis in mice

Aim: To evaluate the effects of 60 Hz extremely low frequency (ELF) elelctromagnetic field (EMF) exposure on germ cell apoptosis in the testis of mice. Methods: Adult male BALB/c mice (7 weeks of age) were exposed to a 60 Hz EMF of 0.1 mT or 0.5 mT for 24 h/day. A sham-exposed group served as the control. After 8 weeks of exposure, the mice were sacrificed. Germ cell apoptosis in the testis was assessed by histopathological examination, the terminal deoxynucleotidyl transferase-mediated dUTP-biotin nick end labeling assay (TUNEL) and flow cytometric examination of isolated spermatogenic cells stained with 7 aminoactinomycin D (7-AAD). Results: EMF exposure did not significantly affect the body and testis weights, but significantly increased the incidence of germ cell death. The distinguishing morphological feature of EMF exposure was a decrement in the number of well organized seminiferous tubules. Quantitative analysis of TUNEL-positive germ cells showed a significantly higher apoptotic rate in the 0.5 mT exposed mice than that in the sham controls (P<0.05), while the difference between the two exposed groups was insignificant. The TUNEL-positive cells were mainly spermatogonia. In flow cytometry analysis, the percentage of live cells [forward scatter count (FSC)high7-AAD-] was lower in the exposed groups than that in the controls (Figure 5A), but the decrease in viability was not statistically significant. Conclusion: Continuous exposure to ELF EMF may induce testicular germ cell apoptosis in mice.

Effect of Electromagnetic Fields on Proliferation and Differentiation of Cultured Mouse Bone Marrow Mesenchymal Stem Cells

Summary: In order to study the effects of electromagnetic fields (EMFs) on proliferation, differentiation and intercellular cyclic AMP (cAMP) in mouse bone marrow mesenchymal stem cells (MSCs) in vitro, the mouse bone MSCs were isolated and cultured in vitro. The third passage MSCs were divided into 4 groups and stimulated with EMFs. The cellular proliferation (MTT), the cellular differentiation (alkaline phosphatase activity, ALP), and the intercellular cAMP level were investigated at different time points. The results showed that EMF (50Hz pulse burst 2 mT peak) inhibited the cellular proliferation (P<0.05), enhanced the cellular differentiation (P<0.05), and increased the intercellular cAMP level (P<0.01) in the early time of the stimulation (1-3 days), but the intercellular cAMP level did not increased further in the later days. We are led to conclude that the cAMP may be involved in the mediation of the growth inhibitory and differentiation-inducing signals of specific EMFs in vitro.

Effect of low-frequency electromagnetic field on the as-cast microstructure of a new super high strength aluminum alloy by horizontal continuous casting

The super high strength aluminum alloy ingots with 100 mm in diameter were cast by the process of low-frequency electromagnetic horizontal continuous casting (LFEHC) and the effect of electromagnetic field on the as-cast microstructure was studied. Results show that microstructure of the sample prepared by the LFEHC process was greatly refined. Microstructures at the border and the center of the ingots were fine, uniform and rosette-shaped. Electromagnetic frequency plays a key role in microstructure refining. Fine and uniform microstructures can be obtained with optimal electromagnetic frequency. In this experiment, under a frequency of 30 Hz the microstructure was the finest and the most uniform.

Experimental studies and phase field modeling of microstructure evolution during solidification with electromagnetic stirring

Thixocasting requires manufacturing of billets with non-dendritic microstructure.Aluminum alloy A356 billets were produced by rheocasting in a mould placed inside a linear electromagnetic stirrer.Subsequent heat treatment was used to produce a transition from rosette to globular microstructure.The current and the duration of stirring were explored as control parameters.Simultaneous induction heating of the billet during stirring was quantified using experimentally determined thermal profiles.The effect of processing parameters on the dendrite fragmentation was discussed.Corresponding computational modeling of the process was performed using phase-field modeling of alloy solidification in order to gain insight into the process of morphological changes of a solid during this process.A non-isothermal alloy solidification model was used for simulations.The morphological evolution under such imposed thermal cycles was simulated and compared with experimentally determined one.Suitable scaling using the thermosolutal diffusion distances was used to overcome computational difficulties in quantitative comparison at system scale.The results were interpreted in the light of existing theories of microstructure refinement and globularisation.

Low-frequency pulsed electromagnetic field pretreated bone marrow-derived mesenchymal stem cells promote the regeneration of crush-injured rat mental nerve

Bone marrow-derived mesenchymal stem cells （BMSCs） have been shown to promote the regeneration of injured peripheral nerves. Pulsed electromagnetic field （PEMF） reportedly promotes the proliferation and neuronal differentiation of BMSCs. Low-frequency PEMF can induce the neuronal differentiation of BMSCs in the absence of nerve growth factors. This study was designed to investigate the effects of low-frequency PEMF pretreatment on the proliferation and function of BMSCs and the effects of low-frequency PEMF pre-treated BMSCs on the regeneration of injured peripheral nerve using in vitro and in vivo experiments.In in vitro experiments, quantitative DNA analysis was performed to determine the proliferation of BMSCs, and reverse transcription-polymerase chain reaction was performed to detect S100 （Schwann cell marker）, glial fibrillary acidic protein （astrocyte marker）, and brain-derived neurotrophic factor and nerve growth factor （neurotrophic factors） mRNA expression. In the in vivo experiments, rat models of crush-injured mental nerve established using clamp method were randomly injected with low-frequency PEMF pretreated BMSCs, unpretreated BMSCs or PBS at the injury site （1 × 106 cells）. DiI-labeled BMSCs injected at the injury site were counted under the fluorescence microscope to determine cell survival. One or two weeks after cell injection, functional recovery of the injured nerve was assessed using the sensory test with von Frey filaments. Two weeks after cell injection, axonal regeneration was evaluated using histomorphometric analysis and retrograde labeling of trigeminal ganglion neurons. In vitro experiment results revealed that low-frequency PEMF pretreated BMSCs proliferated faster and had greater mRNA expression of growth factors than unpretreated BMSCs. In vivo experiment results revealed that compared with injection of unpretreated BMSCs, injection of low-frequency PEMF pretreated BMSCs led to higher myelinated axon count and axon density and more DiI-labeled neurons in the trigeminal ganglia, contributing to rapider functional recovery of injured mental nerve. These findings suggest that low-frequency PEMF pretreatment is a promising approach to enhance the efficacy of cell therapy for peripheral nerve injury repair.

Evaluation of spermatogenesis and fertility in F1 male rats after in utero and neonatal exposure to extremely low frequency electromagnetic fields

Aim:To determine whether in utero and neonatal exposure to a 60 Hz extremely low frequency electromagnetic field (EMF) results in spermatotoxicity and reproductive dysfunction in the F1 offspring of rats.Methods:Age-matched, pregnant Sprague-Dawley rats were exposed continuously (21 h/day) to a 60 Hz EMF at field strengths of 0 (sham control),5,83.3 or 500 μT from day 6 of gestation through to day 21 of lactation.The experimentally generated magnetic field was monitored continuously (uninterrupted monitoring over the period of the study) throughout the study.Results:No exposure-related changes were found in exposed or sham-exposed animals with respect to the anogenital distance,preputial separation,testis weight,testicular histology,sperm count,daily sperm production, sperm motility,sperm morphology and reproductive capacity of F1 offspring.Conclusion:Exposure of Sprague- Dawley rats to a 60 Hz EMF at field strengths of up to 500 μT from day 6 of gestation to day 21 of lactation did not produce any detectable alterations in offspring spermatogenesis and fertility.

THREE-DIMENSIONAL CHARACTERISTICS AND HOMOGENIZATION OF ELECTROMAGNETIC FIELD IN SOFT-CONTACT CONTINUOUS CASTING MOLD

The three-dimensional electromagnetic characteristics and non-uniform distribution of electromagnetic field in soft-contact continuous casting mold have been analyzed by numerical simulation. The results show that the maximum electromagnetic flux density is found in front of slit; the electromagnetic flux density becomes large as the coil current and slit number increase. In a certain frequency range, the electromagnetic flux density increases with the increase of frequency and the frequency range is different with the change of azimuthal position along the inner wall of mold. The uniformity of electromagnetic field is influenced mainly by frequency and mold structure parameters. Increasing slit number and adjusting slit arrangement position can improve the electromagnetic flux density and the uniformity of electromagnetic field. For a soft-contact mold with 16 slits, when frequency is 20 kHz, the optimal slit arrangement parameter is a:b=1:2, c=0.

Electromagnetic Field Change the Expression of Osteogenesis Genes in Murine Bone Marrow Mesenchymal Stem Cells

In order to identify the differentially expressing gene of bone marrow mesenchymal stem cells （MSCs） stimulated by electromagnetic field （EMF） with osteogenesis microarray analysis, the bone marrow MSCs of SD rats were isolated and cultured in vitro. The third-passage cells were stimulated by EMFs and total RNA was extracted, purified and then used for the synthesis of cDNA and cRNA. The cRNA of stimulated group and the control group was hybridized with the rat oligo osteogenesis microarray respectively. The hybridization signals were acquired by using X-ray film after chemiluminescent detection and the data obtained were analyzed by employing the web-based completely integrated GEArray Expression Analysis Suite. RT-PCR was used to identify the target genes： Bmp1, Bmp7, Egf and Egfr. The results showed that 19 differentially expressing genes were found between the stimulated group and the control group. There were 6 up-regulated genes and 13 down-regulated genes in the stimulated group. Semi-quantitative RT-PCR confirmed that the expressions of Bmpl, Bmp7 mRNA of the stimulated group were up-regulated （P〈0.05） and those of Egf, Egfr were down-regulated （P〈0.05）. It was suggested that the gene expression profiles of osteogenesis of the bone marrow MSCs were changed after EMF treatment. It is concluded that the genes are involved in skeletal development, bone mineral metabolism, cell growth and differentiation, cell adhesion etc.

The Effects of High-intensity Pulsed Electromagnetic Field on Proliferation and Differentiation of Neural Stem Cells of Neonatal Rats in vitro

The effects of high-intensity pulsed electromagnetic stimulation （HIPEMS） on proliferation and differentiation of neonatal rat neural stem cells in vitro were investigated. Neural stem cells derived from neonatal rats were exposed to 0.1 Hz, 0.5–10 Tesla （T） [8 groups of B–I, respectively], 5 stimuli of HIPEMF. The sham exposure controls were correspondingly established. Inverted phase contrast microscope was used to observe the cultured cells, MTT assay to detect the viability of the cells as expressed by absorbance （A） value, and flow cytometry to measure differentiation of neural stem cells. The results showed that A values of neural stem cells in both 3.0 T and 4.0 T groups were significantly higher than the other groups 24 to 168 h post HPEMS, indicating a strong promotion of the growth of neural stem cells （P〈0.05）. The A values of neural stem cells in the 6.0 T, 8.0 T, and 10.0 T groups were lower than the sham exposure control group, indicating a restraint of the growth of neural stem cells. The rate of neuron-specific enolase-positive neurons revealed by flow cytometry in HPEMS groups was the same as that in control group （P〉0.05）. It was suggested that 0.1 Hz, 5 pulses stimulation of HPEMS within certain scale of intensity （0.5–10.0 T）, significantly promoted the growth of neural stem cells with the rational intensity being 4.0 T.

Effect of electromagnetic force on melt induced by traveling magnetic field

A new apparatus was designed to measure the electromagnetic force and a computational study of the traveling magnetic field(TMF)and its application to the Ga-In-Sn melt(with low melting point),then the forces on Al,Mg,and Li melt,were simulated. The result show that the electromagnetic force on the melt increases linearly with the increasing length of the melt in the TMF.The TMF-induced Lorentz force increases with increasing frequency,and then decreases.The maximum value is obtained when the current frequency is 160 Hz,over that frequency the force decreases rapidly.When the iron-core is activated,the force increases when the melt closes to the iron-core.The Lorentz forces have inversely-proportional relationships with the electrical resistivity,the dfx/dρdecreases and the dfy/dρincreases with the increasing electrical resistivity(df/dρis the slope of the Lorentz force profile).

Electromagnetic continuous casting by imposing multi-electromagnetic field

In order to obtain cast metal of high quality, an investigation was carried out by simultaneous imposition of multi electromagnetic fields from the outside of a cold crucible copper mold. Sn 4.5%Pb as a simulator of high melting point metal was continuously cast under different conditions. The results show that multi electromagnetic fields can eliminate surface defects, and coarse columnar grains of the solidification structure is turned into equiaxed crystal with the increase of magnetic flux density. Moreover, finer equiaxed crystal structure is obtained when rapidly solidified sheet is fed into the mold during continuous casting.[

Solidification structure of eutectic Al-Si alloy under a high magnetic field-aid-electromagnetic vibration

An electromagnetic vibration was generated by simultaneously imposing a strong static magnetic field （up to 10 T） and an alternative electricity current to the metal. Its effects on the solidification structure of eutectic Al-Si alloy have been investigated experimentally. It is found that the eutectic structure has been refined by solely imposing high magnetic field while it is coarsened under the electromagnetic vibration. Furthermore, polyhedral Si grains and non-dendritic α-Al appeared when the electromagnetic vibration strength was strong enough. The refining of eutectic structure is attributed to the decrease of diffusion coefficient caused by the strong magnetic field. The coarseness of eutectic structure may be attributed to the convection caused by electromagnetic vibration. Strong convection may break co-operative growth of eutectic phases to form polyhedral Si grains and non-dendritic α-Al.

THE ELECTROMAGNETIC FIELD CALCULATION AND ANALYSIS OF LEVITATION MELTING WITH COLD CRUCIBLE

In this paper, using the quasi-3D coupled current method, the influences of structure of cold crucible, the power frequency, the electricity property of melt, the coil position and current on the electromagnetic field (EMF) and the levitation characteristics in the melting processes are analyzed. It is shown that in the processes of levitation melting with cold crucible, the power frequency and cold crucible structure are the decisive factors for the ability of magnetic flux penetrating into cold crucible. The magnetic flux density in cold crucible is reduced as the increasing of power frequency, and this tendency becomes stronger when the power frequency is higher than 100kHz. The segmented structure of cold crucible can reduce the induction eddy in itself effectively, and the higher the power frequency is, the better the result is. So, a cold crucible can be segmented into 16-20 sectors for high frequency electromagnetic field and/or 8-12 sectors for lower frequency one. It is also shown that the levitation force of melting charge is related to coil current as a parabolic function.