Power-Sharing Enhancement Using Harmonized Membership Fuzzy Logic Droop Control Based Micro-Grid

The contribution of Renewable Energy Resources(RER)in the process of power generation is significantly high in the recent days since it paves the way for overcoming the issues like serious energy crisis and natural contamination.This paper deals with the renewable energy based micro-grid as it is regarded as the apt solution for integrating the RER with the electrical frameworks.As thefixed droop coefficients in conventional droop control approaches have caused various limitations like low power-sharing and sudden drops of grid voltage in the Direct Current(DC)side,the Harmonized Membership Fuzzy Logic(MFL)droop control is employed in this present study.This proposed droop control for the hybrid PV-wind-battery system with MFL assists in achieving proper power-sharing and minimizing Total Harmonic Distortion(THD)in the emer-gency micro-grid.It eradicates the deviations in voltage and frequency with itsflexible and robust operation.The THD is reduced and attains the value of 3.1%compared to the traditional droop control.The simulation results of harmo-nized MFL droop control are analogized with the conventional approaches to vali-date the performance of the proposed method.In addition,the experimental results provided by the Field Programmable Gate Array(FPGA)based laboratory setup built using a solar photovoltaic(PV)and wind Permanent Magnet Synchro-nous Generator(PMSG)reaffirms the design.

Ship-YOLOv8:一种轻量级高分辨遥感图像船舶细粒度检测算法

针对高分辨率影像的船舶细粒度目标检测分类任务中类内差异大、类间相似性高、物体和场景的尺度变化范围大、特征提取困难、样本小等特点,提出了一种基于YOLOv8为基础的改进算法。首先,在骨干网络中引入SimAM注意力机制,使得模型在复杂背景中更加聚焦船舶对象;其次,在颈部引入SPD-Conv模块,改善复杂背景下船舶尺度变化大和小目标检测的问题;最后针对细粒度船舶目标检测的特点,替换Mish激活函数和Focal-Loss损失函数,加快模型收敛,提高模型精度。经对比实验可知,改进的算法在保证检测速度和模型参数量的同时,在FAIR1M_Ship数据集取得了94.49%的检测精度,与目前流行的目标检测算法相比,在检测精度上有一定的提升。

Rare-earth Magnet Free Flux-switching Generator for Wind Turbines in Micro-grids:A Review

In traditional electricity generation plants,large powerful synchronous,induction,and direct current generators were used.With the proliferation of microgrids focused on electricity generation from renewable energy sources in today’s power grids,studies have been conducted on different types of generators.Instead of the traditional generator architecture,generators with brushless structures,particularly those utilizing magnets for excitation,have found broad applications.Fluxswitching generators(FSGs)are innovative types owing to their robust structure,active stator design,and high power density capabilities.However,designs have typically relied on rare-earth element magnets.Rare-earth magnets possess negative characteristics such as price uncertainty,the potential risk of scarcity in the future,and limited geographical production,leading to research on FSGs that do not depend on rare-earth magnets.This study comprehensively examines FSGs that do not use rare-earth element magnets.The study delves into the usage areas,operational mechanisms,structural diversities,and counterparts in the literature of these generators.

A Framework of LSTM Neural Network Model in Multi-Time Scale Real-Time Prediction of Ship Motions in Head Waves

Ship motions induced by waves have a significant impact on the efficiency and safety of offshore operations.Real-time prediction of ship motions in the next few seconds plays a crucial role in performing sensitive activities.However,the obvious memory effect of ship motion time series brings certain difficulty to rapid and accurate prediction.Therefore,a real-time framework based on the Long-Short Term Memory(LSTM)neural network model is proposed to predict ship motions in regular and irregular head waves.A 15000 TEU container ship model is employed to illustrate the proposed framework.The numerical implementation and the real-time ship motion prediction in irregular head waves corresponding to the different time scales are carried out based on the container ship model.The related experimental data were employed to verify the numerical simulation results.The results show that the proposed method is more robust than the classical extreme short-term prediction method based on potential flow theory in the prediction of nonlinear ship motions.

Numerical Simulation of Multiple Collisions Between Ice Ridge and Polar Ship

Ships navigating in ice-covered regions will inevitably collide with ice ridges.Compared to other ice bodies,ice ridges exhibit more complicated mechanical behaviors due to the scale and structure characteristics.In this paper,nonlinear finite element method is used to investigate the interaction between a polar ship and an ice ridge.The ice ridge is modelled as elastic-plastic material based on Drucker-Prager yield function,with the consideration of the influence of cohesion,friction angle and material hardening.The material model is developed in LS-DYNA and solved using semi-implicit mapping algorithm.The stress distribution of ice ridge and ship,and the ice load history are evaluated through the simulation of multiple collisions.In addition,parametric analysis is performed to investigate the influence of ridge thickness and impact velocity on the ice load and energy absorption.

Unmanned Ship Identification Based on Improved YOLOv8s Algorithm

Aiming at defects such as low contrast in infrared ship images,uneven distribution of ship size,and lack of texture details,which will lead to unmanned ship leakage misdetection and slow detection,this paper proposes an infrared ship detection model based on the improved YOLOv8 algorithm(R_YOLO).The algorithm incorporates the Efficient Multi-Scale Attention mechanism(EMA),the efficient Reparameterized Generalized-feature extraction module(CSPStage),the small target detection header,the Repulsion Loss function,and the context aggregation block(CABlock),which are designed to improve the model’s ability to detect targets at multiple scales and the speed of model inference.The algorithm is validated in detail on two vessel datasets.The comprehensive experimental results demonstrate that,in the infrared dataset,the YOLOv8s algorithm exhibits improvements in various performance metrics.Specifically,compared to the baseline algorithm,there is a 3.1%increase in mean average precision at a threshold of 0.5(mAP(0.5)),a 5.4%increase in recall rate,and a 2.2%increase in mAP(0.5:0.95).Simultaneously,while less than 5 times parameters,the mAP(0.5)and frames per second(FPS)exhibit an increase of 1.7%and more than 3 times,respectively,compared to the CAA_YOLO algorithm.Finally,the evaluation indexes on the visible light data set have shown an average improvement of 4.5%.

Theoretical and Experimental Research of High-Static-Low Dynamic Torsional Vibration Isolator for Ship Shafting

High-static-low-dynamic stiffness (HSLDS) vibration isolators have been demonstrated to be an effective means of attenuating low-frequency vibrations, and may be utilized for ship shafting applications to mitigate torsional vibration. This paper presents the construction of a highly compact HSLDS torsional vibration isolator by connecting positive and negative stiffness components in paral lel. Based on mechanical model analysis, the restoring torque of negative stiffness components is de rived from their springs and connecting rods, while that of positive stiffness components is obtained through their circular section flexible rods. The quasizero stiffness characteristics of the HSLDS iso lator are achieved through a combination of static structural simulation and experimental test. The tor sional vibration isolation performance is assessed by means of numerical simulation and theory analy sis. Finally, the frequency-sweep vibration test is conducted. The test results indicate that the HSLDS torsional vibration isolator exhibits superior low-frequency isolation performance compared to its linear counterpart, rendering it a promising solution for mitigating low-frequency torsional vi bration in ship shafting.

Efficient Ship:A Hybrid Deep Learning Framework for Ship Detection in the River

Optical image-based ship detection can ensure the safety of ships and promote the orderly management of ships in offshore waters.Current deep learning researches on optical image-based ship detection mainly focus on improving one-stage detectors for real-time ship detection but sacrifices the accuracy of detection.To solve this problem,we present a hybrid ship detection framework which is named EfficientShip in this paper.The core parts of the EfficientShip are DLA-backboned object location(DBOL)and CascadeRCNN-guided object classification(CROC).The DBOL is responsible for finding potential ship objects,and the CROC is used to categorize the potential ship objects.We also design a pixel-spatial-level data augmentation(PSDA)to reduce the risk of detection model overfitting.We compare the proposed EfficientShip with state-of-the-art(SOTA)literature on a ship detection dataset called Seaships.Experiments show our ship detection framework achieves a result of 99.63%(mAP)at 45 fps,which is much better than 8 SOTA approaches on detection accuracy and can also meet the requirements of real-time application scenarios.

Fine-Grained Ship Recognition Based on Visible and Near-Infrared Multimodal Remote Sensing Images: Dataset,Methodology and Evaluation

Fine-grained recognition of ships based on remote sensing images is crucial to safeguarding maritime rights and interests and maintaining national security.Currently,with the emergence of massive high-resolution multi-modality images,the use of multi-modality images for fine-grained recognition has become a promising technology.Fine-grained recognition of multi-modality images imposes higher requirements on the dataset samples.The key to the problem is how to extract and fuse the complementary features of multi-modality images to obtain more discriminative fusion features.The attention mechanism helps the model to pinpoint the key information in the image,resulting in a significant improvement in the model’s performance.In this paper,a dataset for fine-grained recognition of ships based on visible and near-infrared multi-modality remote sensing images has been proposed first,named Dataset for Multimodal Fine-grained Recognition of Ships(DMFGRS).It includes 1,635 pairs of visible and near-infrared remote sensing images divided into 20 categories,collated from digital orthophotos model provided by commercial remote sensing satellites.DMFGRS provides two types of annotation format files,as well as segmentation mask images corresponding to the ship targets.Then,a Multimodal Information Cross-Enhancement Network(MICE-Net)fusing features of visible and near-infrared remote sensing images,has been proposed.In the network,a dual-branch feature extraction and fusion module has been designed to obtain more expressive features.The Feature Cross Enhancement Module(FCEM)achieves the fusion enhancement of the two modal features by making the channel attention and spatial attention work cross-functionally on the feature map.A benchmark is established by evaluating state-of-the-art object recognition algorithms on DMFGRS.MICE-Net conducted experiments on DMFGRS,and the precision,recall,mAP0.5 and mAP0.5:0.95 reached 87%,77.1%,83.8%and 63.9%,respectively.Extensive experiments demonstrate that the proposed MICE-Net has more excellent performance on DMFGRS.Built on lightweight network YOLO,the model has excellent generalizability,and thus has good potential for application in real-life scenarios.

Surface Pressure Loading Technology of Ship Structures

A hull structure is prone to local deformation and damage due to the pressure load on the surface.How to simulate surface pressure is an important issue in ship structure test.The loading mode of hydraulic actuator combined with high-pressure flexible bladder was proposed,and the numerical model of the loading device based on flexible bladder was established.The design and analysis method of high-pressure flexible bladder based on aramid-fiber reinforced thermoplastic polyurethane was proposed to break through the surface pressure loading technology of ship structures.The surface pressure loading system based on flexible bladder was developed.The ultimate strength verification test of the box girder under the combined action of bending moment and pressure was carried out to systematically verify the feasibility and applicability of the loading system.The results show that the surface pressure loading technology can be used well for applying uniform pressure to ship structures.Compared with the traditional surface loading methods,the improved device can be applied with horizontal constant pressure load,with rapid response and safe process,and the pressure load is always stable with the increase of the bending moment load during the test.The requirement for uniform loading in the comprehensive strength test of large structural models is satisfied and the accuracy of the test results is improved by this system.

Distributed Economic MPC for Synergetic Regulation of the Voltage of an Island DC Micro-Grid

In this paper,distributed model predictive control(DMPC) for island DC micro-grids(MG) with wind/photovoltaic(PV)/battery power is proposed,which coordinates all distributed generations(DG) to stabilize the bus voltage together with the insurance of having computational efficiency under a real-time requirement.Based on the feedback of the bus voltage,the deviation of the current is dispatched to each DG according to cost over the prediction horizon.Moreover,to avoid the excessive fluctuation of the battery power,both the discharge-charge switching times and costs are considered in the model predictive control(MPC) optimization problems.A Lyapunov constraint with a time-varying steady-state is designed in each local MPC to guarantee the stabilization of the entire system.The voltage stabilization of the MG is achieved by this strategy with the cooperation of DGs.The numeric results of applying the proposed method to a MG of the Shanghai Power Supply Company shows the effectiveness of the distributed economic MPC.

SAR-LtYOLOv8:A Lightweight YOLOv8 Model for Small Object Detection in SAR Ship Images

The high coverage and all-weather capabilities of Synthetic Aperture Radar(SAR)image ship detection make it a widely accepted method for maritime ship positioning and identification.However,SAR ship detection faces challenges such as indistinct ship contours,low resolution,multi-scale features,noise,and complex background interference.This paper proposes a lightweight YOLOv8 model for small object detection in SAR ship images,incorporating key structures to enhance performance.The YOLOv8 backbone is replaced by the Slim Backbone(SB),and the Delete Medium-sized Detection Head(DMDH)structure is eliminated to concentrate on shallow features.Dynamically adjusting the convolution kernel weights of the Omni-Dimensional Dynamic Convolution(ODConv)module can result in a reduction in computation and enhanced accuracy.Adjusting the model’s receptive field is done by the Large Selective Kernel Network(LSKNet)module,which captures shallow features.Additionally,a Multi-scale Spatial-Channel Attention(MSCA)module addresses multi-scale ship feature differences,enhancing feature fusion and local region focus.Experimental results on the HRSID and SSDD datasets demonstrate the model’s effectiveness,with a 67.8%reduction in parameters,a 3.4%improvement in AP(average precision)@0.5,and a 5.4%improvement in AP@0.5:0.95 on the HRSID dataset,and a 0.5%improvement in AP@0.5 and 1.7%in AP@0.5:0.95 on the SSDD dataset,surpassing other state-of-the-art methods.

A Time-Domain Numerical Simulation for Free Motion Responses of Two Ships Advancing in Head Waves

The constant panel method within the framework of potential flow theory in the time domain is developed for solving the hydrodynamic interactions between two parallel ships with forward speed.When solving problems within a time domain framework,the free water surface needs to simultaneously satisfy both the kinematic and dynamic boundary conditions of the free water surface.This provides conditions for adding artificial damping layers.Using the Runge−Kutta method to solve equations related to time.An upwind differential scheme is used in the present method to deal with the convection terms on the free surface to prevent waves upstream.Through the comparison with the available experimental data and other numerical methods,the present method is proved to have good mesh convergence,and satisfactory results can be obtained.The constant panel method is applied to calculate the hydrodynamic interaction responses of two parallel ships advancing in head waves.Numerical simulations are conducted on the effects of forward speed,different longitudinal and lateral distances on the motion response of two modified Wigley ships in head waves.Then further investigations are conducted on the effects of different ship types on the motion response.

Structural Characteristics and Evolution of a Weighted Sino-US Container Shipping Network

This study selected the Sino-US route data from the top 30 global container liner companies between December 1,2019,and December 29,2019,as the data source utilizing the complex network research methodology.It constructs a Sino-US container shipping network through voyage weighting and analyzes the essential structural characteristics to explore the network’s complex structural fea-tures.The network’s evolution is examined from three perspectives,namely,time,space,and event influence,aiming to comprehens-ively explore the network’s evolution mechanism.The results revealed that:1)the weighted Sino-US container shipping network exhib-its small-world and scale-free properties.Key hub ports in the United States include NEW YORK NY,SAVANNAH GA,LOS ANGELES CA,and OAKLAND CA,whereas SHANGHAI serving as the hub port in China.The geographical distribution of these hub ports is uneven.2)Concerning the evolution of the weighted Sino-US container shipping network,from a temporal perspective,the evolution of the regional structure of the entire Sino-US region and the Inland United States is in a stage of radiative expansion and de-velopment,with a need for further enhancement in competitiveness and development speed.The evolution of the regional structure of southern China and Europe is transitioning from the stage of radiative expansion and development to an advanced equilibrium stage.The shipping development in Northern China,the Western and Eastern United States,and Asia is undergoing significant changes but faces challenges of fierce competition and imbalances.From a spatial perspective,the rationality and effectiveness of the improved weighted Barrat-Barthelemy-Vespignani(BBV)model are confirmed through theoretical derivation.The applicability of the improved evolution model is verified by simulating the evolution of the weighted Sino-US container shipping network.From an event impact per-spective,the Corona Virus Disease 2019(COVID-19)pandemic has not fundamentally affected the spatial pattern of the weighted Sino-US container shipping network but has significantly impacted the network’s connectivity.The network lacks sufficient resilience and stability in emergency situations.3)Based on the analysis of the structural characteristics and evolution of the weighted Sino-US con-tainer shipping network,recommendations for network development are proposed from three aspects:emphasizing the development of hub ports,focusing on the balanced development of the network,and optimizing the layout of Chinese ports.

Improved Scatter Search Algorithm for Multi-skilled Personnel Scheduling of Ship Block Painting

This paper focuses on the optimization method for multi-skilled painting personnel scheduling.The budget working time analysis is carried out considering the influence of operating area,difficulty of spraying area,multi-skilled workers,and worker’s efficiency,then a mathematical model is established to minimize the completion time. The constraints of task priority,paint preparation,pump management,and neighbor avoidance in the ship block painting production are considered. Based on this model,an improved scatter search(ISS)algorithm is designed,and the hybrid approximate dynamic programming(ADP)algorithm is used to improve search efficiency. In addition,the two solution combination methods of path-relinking and task sequence combination are used to enhance the search breadth and depth. The numerical experimental results show that ISS has a significant advantage in solving efficiency compared with the solver in small scale instances;Compared with the scatter search algorithm and genetic algorithm,ISS can stably improve the solution quality. Verified by the production example,ISS effectively shortens the total completion time of the production,which is suitable for scheduling problems in the actual painting production of the shipyard.

Time-Domain Higher-Order Boundary Element Method for Simulating High Forward-Speed Ship Motions in Waves

The hydrodynamic performance of a high forward-speed ship in obliquely propagating waves is numerically examined to assess both free motions and wave field in comparison with a low forward-speed ship.This numerical model is based on the time-domain potential flow theory and higher-order boundary element method,where an analytical expression is completely expanded to determine the base-unsteady coupling flow imposed on the moving condition of the ship.The ship in the numerical model may possess different advancing speeds,i.e.stationary,low speed,and high speed.The role of the water depth,wave height,wave period,and incident wave angle is analyzed by means of the accurate numerical model.It is found that the resonant motions of the high forward-speed ship are triggered by comparison with the stationary one.More specifically,a higher forward speed generates a V-shaped wave region with a larger elevation,which induces stronger resonant motions corresponding to larger wave periods.The shoaling effect is adverse to the motion of the low-speed ship,but is beneficial to the resonant motion of the high-speed ship.When waves obliquely propagate toward the ship,the V-shaped wave region would be broken due to the coupling effect between roll and pitch motions.It is also demonstrated that the maximum heave motion occurs in beam seas for stationary cases but occurs in head waves for high speeds.However,the variation of the pitch motion with period is hardly affected by wave incident angles.

Development of Smart Micro-grid Energy Efficiency Technologies on Workplace Level

The objective of this paper was to understand the increasing importance of building energy consumption, an overview of the comfort needs of the occupants is first deemed necessary in new control strategy for automatic control and to present facts that characterize the energy consumption, most particularly at the workplaces level with new technology strategies. The study’s methodology applies functional and hierarchical separation. The contributions of this paper are static and dynamic models of individual users in a proposed existing building to create an office environment. To fulfill the purpose of the study and the research the following research questions will be investigated and analyzed from an architect’s perspective: (1) Are there appropriate technologies for improving energy efficiency in new buildings from the point of view the micro-grid, control and evaluation process in strategy? (2) Which sensor technology can determine the zone that needs or needs not to be considered the comfort?

Decoding RoPax Ship Capsizes and Development of an ISO Ship Safety Standard

Marine accidents often result in significant losses of human life, environmental damage, and property destruction. Additionally, ships and offshore plants are large-scale and complex systems, making safety assessments challenging. However, the advent of onboard electronic systems has made it possible to monitor and respond more effectively. These new technologies can enhance safety levels while reducing the workload on crews. In this paper, authors analyze recent accidents involving ships with high structures above the water, such as car carriers or RoPax vessels, and propose preventive safety indicators to help prevent similar accidents from recurring.

Sending The King Ship, A Tradition Connecting Two Peoples

“The sky is dark,and it is about to rain,”goes a lyric from China’s coastal Minnan(southern Fujian)region.“The king ship is leaving the bay,papa is going out to sea,and mama is sending the ship off.May it bring us wealth,food,and the gods’protection.”The 600-year-old custom is called Ong Chun,Wangchuan,Wangkang,or“Sending the King Ship.”

Ship recognition based on HRRP via multi-scale sparse preserving method

In order to extract the richer feature information of ship targets from sea clutter, and address the high dimensional data problem, a method termed as multi-scale fusion kernel sparse preserving projection(MSFKSPP) based on the maximum margin criterion(MMC) is proposed for recognizing the class of ship targets utilizing the high-resolution range profile(HRRP). Multi-scale fusion is introduced to capture the local and detailed information in small-scale features, and the global and contour information in large-scale features, offering help to extract the edge information from sea clutter and further improving the target recognition accuracy. The proposed method can maximally preserve the multi-scale fusion sparse of data and maximize the class separability in the reduced dimensionality by reproducing kernel Hilbert space. Experimental results on the measured radar data show that the proposed method can effectively extract the features of ship target from sea clutter, further reduce the feature dimensionality, and improve target recognition performance.