This paper presents the results of an experimental investigation dealing with the effect of bow overhang extensions on the quantity of shipping water over the foredeck in case of ships advancing in regular head waves....This paper presents the results of an experimental investigation dealing with the effect of bow overhang extensions on the quantity of shipping water over the foredeck in case of ships advancing in regular head waves. To perform this investigation, a series of free-running tests was conducted in regular waves using an experimental model of a multipurpose cargo ship to quantify the amount of shipping water. The tests were performed on five bow overhang variants with several combinations of wavelength and ship speed conditions. It was observed that the quantity of shipping water was affected by some parameters such as wavelength, ship speed, and bow shape in terms of an overhang extension. The results show the significant influence of an overhang extension, which is associated with the bow flare shape, on the occurrence of water shipping. These results involve the combined incoming regular waves and model speed.展开更多
In this research,a commercial CFD code ＂Fluent＂ was applied to optimization of bulbous bow shape for a non ballast water ships（NBS）.The ship was developed at the Laboratory of the authors in Osaka Prefecture Unive...In this research,a commercial CFD code ＂Fluent＂ was applied to optimization of bulbous bow shape for a non ballast water ships（NBS）.The ship was developed at the Laboratory of the authors in Osaka Prefecture University,Japan.At first,accuracy of the CFD code was validated by comparing the CFD results with experimental results at towing tank of Osaka Prefecture University.In the optimizing process,the resistances acting on ships in calm water and in regular head waves were defined as the object function.Following features of bulbous bow shapes were considered as design parameters： volume of bulbous bow,height of its volume center,angle of bow bottom,and length of bulbous bow.When referring to the computed results given by the CFD like resistance,pressure and wave pattern made by ships in calm water and in waves,an optimal bow shape for ships was discovered by comparing the results in the series of bow shapes.In the computation on waves,the ship is in fully captured condition because shorter waves,λ/Lpp 0.6,are assumed.展开更多
In this paper, added resistances acting on a hull of non ballast water ship(NBS) in high waves is discussed. The non ballast water ships were developed at the laboratory of the authors at Osaka Prefecture University, ...In this paper, added resistances acting on a hull of non ballast water ship(NBS) in high waves is discussed. The non ballast water ships were developed at the laboratory of the authors at Osaka Prefecture University, Japan. In the present paper, the performances of three kinds of bow shapes developed for the NBS were theoretically and experimentally investigated to find the best one in high waves. In previous papers, an optimum bow shape for the NBS was developed in calm water and in moderated waves. For a 2 m model for experiments and computations, the wave height is 0.02 m. This means that the wave height is 15% of the draft of the ship in full load conditions. In this paper, added resistances in high waves up to 0.07 m for a 2 m model or 53% of the full load draft are investigated. In such high waves linear wave theories which have been used in the design stage of a ship for a long time may not work well anymore, and experiments are the only effective tool to predict the added resistance in high waves. With the computations for waves, the ship is in a fully captured condition because shorter waves, λ/Lpp<0.6, are assumed.展开更多
In order to verify the effectiveness of electrolytic treatment on ships’ ballast water, experiments are carried out by a pilot system in laboratory. The raw seawater and seawater with different concentrations of diff...In order to verify the effectiveness of electrolytic treatment on ships’ ballast water, experiments are carried out by a pilot system in laboratory. The raw seawater and seawater with different concentrations of different algae are simulated as ships’ ballast water. The algae in the raw seawater can be killed if it is treated by electrolysis with an initial residual chlorine concentration of 5 mg/L. If the seawater with one kind of algae (Nitzschia closterum, Dicrateria spp., or Pyramidomonnas sp.105cells/mL) is treated by electrolysis with an initial residual chlorine concentration of 5 mg/L, the alga can be sterilized. If the seawater with one kind of algae (Dunaliella sp., Platymonas or Chlorella spp.) is directly treated by electrolyzing with an initial residual chlorine concentration of 4 mg/L, the instant mortality changes with the concentration of different algae. However, after 72 hours, in all treated samples, there are no live algal cells found.展开更多
As the Arctic Channel continues to be developed,collisions between polar navigation vessels and sea ice are inevitable,which will directly affect structural safety and vibration comfort.However,the numerical analysis ...As the Arctic Channel continues to be developed,collisions between polar navigation vessels and sea ice are inevitable,which will directly affect structural safety and vibration comfort.However,the numerical analysis method of ship-ice collision-induced vibration is not perfect,and the effect of fluid coupling is not typically considered.In this paper,a simplified numerical analysis method for ship-ice collision-induced vibration is proposed,in which a reliable ice load is obtained by first performing ship-ice-water-air coupled collision calculations,followed by ship-ice-water coupled vibration calculations to obtain the vibration response of the structure.In addition,this paper investigates the full coupling method and the modeling ranges and meshing sizes involved in the analysis ship-ice collision-induced vibration,and the computational efficiencies of the traditional ALE algorithm and S-ALE algorithm are compared.The results indicate that the simplified simulation analysis method and gradient meshing model improve the calculation accuracy and efficiency in ship-ice collision and vibration response analysis.Moreover,the modeling range of the water and air models cannot be less than 6 times the ship width,2 times the ship length,and 1 times the ship depth,and the S-ALE algorithm saves 47.86%time compared to the ALE algorithm.The research results in this paper can provide a reference for the numerical simulation of ship-ice collision-induced vibration.展开更多
The receiving response of towed line array to the noise radiated from the tow ship is investigated through normal mode modeling and computer simulation. The phenomenon that the maximum output of the towed line array i...The receiving response of towed line array to the noise radiated from the tow ship is investigated through normal mode modeling and computer simulation. The phenomenon that the maximum output of the towed line array is away from the endfire direction towards the tow ship is explained. The result is important for the understanding of the phenomenon and also for the application research concerning the suppression of the noise from the tow ship as well as adequate application of towed array techniques in shallow water.展开更多
文摘This paper presents the results of an experimental investigation dealing with the effect of bow overhang extensions on the quantity of shipping water over the foredeck in case of ships advancing in regular head waves. To perform this investigation, a series of free-running tests was conducted in regular waves using an experimental model of a multipurpose cargo ship to quantify the amount of shipping water. The tests were performed on five bow overhang variants with several combinations of wavelength and ship speed conditions. It was observed that the quantity of shipping water was affected by some parameters such as wavelength, ship speed, and bow shape in terms of an overhang extension. The results show the significant influence of an overhang extension, which is associated with the bow flare shape, on the occurrence of water shipping. These results involve the combined incoming regular waves and model speed.
文摘In this research,a commercial CFD code ＂Fluent＂ was applied to optimization of bulbous bow shape for a non ballast water ships（NBS）.The ship was developed at the Laboratory of the authors in Osaka Prefecture University,Japan.At first,accuracy of the CFD code was validated by comparing the CFD results with experimental results at towing tank of Osaka Prefecture University.In the optimizing process,the resistances acting on ships in calm water and in regular head waves were defined as the object function.Following features of bulbous bow shapes were considered as design parameters： volume of bulbous bow,height of its volume center,angle of bow bottom,and length of bulbous bow.When referring to the computed results given by the CFD like resistance,pressure and wave pattern made by ships in calm water and in waves,an optimal bow shape for ships was discovered by comparing the results in the series of bow shapes.In the computation on waves,the ship is in fully captured condition because shorter waves,λ/Lpp 0.6,are assumed.
文摘In this paper, added resistances acting on a hull of non ballast water ship(NBS) in high waves is discussed. The non ballast water ships were developed at the laboratory of the authors at Osaka Prefecture University, Japan. In the present paper, the performances of three kinds of bow shapes developed for the NBS were theoretically and experimentally investigated to find the best one in high waves. In previous papers, an optimum bow shape for the NBS was developed in calm water and in moderated waves. For a 2 m model for experiments and computations, the wave height is 0.02 m. This means that the wave height is 15% of the draft of the ship in full load conditions. In this paper, added resistances in high waves up to 0.07 m for a 2 m model or 53% of the full load draft are investigated. In such high waves linear wave theories which have been used in the design stage of a ship for a long time may not work well anymore, and experiments are the only effective tool to predict the added resistance in high waves. With the computations for waves, the ship is in a fully captured condition because shorter waves, λ/Lpp<0.6, are assumed.
文摘In order to verify the effectiveness of electrolytic treatment on ships’ ballast water, experiments are carried out by a pilot system in laboratory. The raw seawater and seawater with different concentrations of different algae are simulated as ships’ ballast water. The algae in the raw seawater can be killed if it is treated by electrolysis with an initial residual chlorine concentration of 5 mg/L. If the seawater with one kind of algae (Nitzschia closterum, Dicrateria spp., or Pyramidomonnas sp.105cells/mL) is treated by electrolysis with an initial residual chlorine concentration of 5 mg/L, the alga can be sterilized. If the seawater with one kind of algae (Dunaliella sp., Platymonas or Chlorella spp.) is directly treated by electrolyzing with an initial residual chlorine concentration of 4 mg/L, the instant mortality changes with the concentration of different algae. However, after 72 hours, in all treated samples, there are no live algal cells found.
文摘As the Arctic Channel continues to be developed,collisions between polar navigation vessels and sea ice are inevitable,which will directly affect structural safety and vibration comfort.However,the numerical analysis method of ship-ice collision-induced vibration is not perfect,and the effect of fluid coupling is not typically considered.In this paper,a simplified numerical analysis method for ship-ice collision-induced vibration is proposed,in which a reliable ice load is obtained by first performing ship-ice-water-air coupled collision calculations,followed by ship-ice-water coupled vibration calculations to obtain the vibration response of the structure.In addition,this paper investigates the full coupling method and the modeling ranges and meshing sizes involved in the analysis ship-ice collision-induced vibration,and the computational efficiencies of the traditional ALE algorithm and S-ALE algorithm are compared.The results indicate that the simplified simulation analysis method and gradient meshing model improve the calculation accuracy and efficiency in ship-ice collision and vibration response analysis.Moreover,the modeling range of the water and air models cannot be less than 6 times the ship width,2 times the ship length,and 1 times the ship depth,and the S-ALE algorithm saves 47.86%time compared to the ALE algorithm.The research results in this paper can provide a reference for the numerical simulation of ship-ice collision-induced vibration.
文摘The receiving response of towed line array to the noise radiated from the tow ship is investigated through normal mode modeling and computer simulation. The phenomenon that the maximum output of the towed line array is away from the endfire direction towards the tow ship is explained. The result is important for the understanding of the phenomenon and also for the application research concerning the suppression of the noise from the tow ship as well as adequate application of towed array techniques in shallow water.
