Experimental observation of ionization and shock fronts in foam targets driven by thermal radiation

The behaviours of ionization and shock propagation in radiatively heated material is crucial for the understanding of indirect drive inertial confinement fusion as well as some astrophysics phenomena. In this work, radiation field with a peak temperature of up to 155 eV was generated in a gold cavity heated by four laser beams on the SG-II laser system and was used to irradiate a plastic foam cylinder at one end. The radiatively ablated foam cylinder was then backlighted side-on by x-ray from a laser-irradiated Ti disk. By observing the transmission decrease due to the shock compression of the foam cylinder, the trajectories of shock front were measured, and from the onset of the intense thermal emission from the side of the cylinder, the propagations of the ionization front were also observed on the same shot. The experimental measurements were compared to predictions of the radiation hydrodynamics code Multi-1D and reasonable agreements were found.

Similar Rayleigh-Taylor Instability of Shock Fronts Perturbed by Corrugated Interfaces

Instability of a planar shock front perturbed by a corrugated interface is analyzed,where the perturbation wavelength is along the shock front plane.The presented analysis involves the effects of the features on the shock front,which is different from a general method presented by D'yakov and Kontorovich,where the shock front is taken as an infinitely discontinuity.The growth rate of the instability of the perturbed shock front is obtained and compared with the growth rate of the Rayleigh-Taylor instability(RTI)of an interface,on which the density gradient and the initial conditions are similar to the perturbed shock front.The analysis and comparisons of the growth rate of the instability indicate that the features of the shock front should be considered seriously in the shock interface interactions.

Electrostatic Instabilities at High Frequency in a Plasma Shock Front

New electrostatic instabilities in the plasma shock front are reported. These instabilities are driven by the electro- static field which is caused by charge separation and the parameter gradients in a plasma shock front. The linear analysis to the high frequency branch of electrostatic instabilities has been carried out and the dispersion relations are obtained numerically. There are unstable disturbing waves in both the parallel and perpendicular directions of shock propagation. The real frequencies of both unstable waves are similar to the electron electrostatic wave, and the unstable growth rate in the parallel direction is much greater than the one in the perpendicular direction. The dependence of growth rates on the electric field and parameter gradients is also presented.

Influence of laser shock peening on microstructure and high-temperature oxidation resistance of Ti45Al8Nb alloy fabricated via laser melting deposition

Laser shock peening(LSP)was used to enhance the high-temperature oxidation resistance of laser melting deposited Ti45Al8Nb alloy.The microstructure and high-temperature oxidation behavior of the as-deposited Ti45Al8Nb alloy before and after LSP were investigated by scanning electron microscopy,X-ray diffraction,and electron backscatter diffraction.The results indicated that the rate of mass gain in the as-deposited sample after LSP exhibited a decrease when exposed to an oxidation temperature of 900℃,implying that LSP-treated samples exhibited superior oxidation resistance at high temperatures.A gradient structure with a fine-grain layer,a deformed-grain layer,and a coarse-grain layer was formed in the LSP-treated sample,which facilitated the diffusion of the Al atom during oxidation,leading to the formation of a dense Al_(2)O_(3)layer on the surface.The mechanism of improvement in the oxidation resistance of the as-deposited Ti45Al8Nb alloy via LSP was discussed.

Experimental and numerical simulation of the attenuation effect of blast shock waves in tunnels at different altitudes

Traffic engineering such as tunnels in various altitudinal gradient zone are at risk of accidental explosion,which can damage personnel and equipment.Accurate prediction of the distribution pattern of explosive loads and shock wave propagation process in semi-enclosed structures at various altitude environment is key research focus in the fields of explosion shock and fluid dynamics.The effect of altitude on the propagation of shock waves in tunnels was investigated by conducting explosion test and numerical simulation.Based on the experimental and numerical simulation results,a prediction model for the attenuation of the peak overpressure of tunnel shock waves at different altitudes was established.The results showed that the peak overpressure decreased at the same measurement points in the tunnel entrance under the high altitude condition.In contrast,an increase in altitude accelerated the propagation speed of the shock wave in the tunnel.The average error between the peak shock wave overpressure obtained using the overpressure prediction formula and the measured test data was less than15%,the average error between the propagation velocity of shock waves predicted values and the test data is less than 10%.The method can effectively predict the overpressure attenuation of blast wave in tunnel at various altitudes.

Role of variation coefficient of stone density in determining success of shock wave lithotripsy in urinary calculi

BACKGROUND Various stone factors can affect the net results of shock wave lithotripsy(SWL).Recently a new factor called variation coefficient of stone density(VCSD)is being considered to have an impact on stone free rates.AIM To assess the role of VCSD in determining success of SWL in urinary calculi.METHODS Charts review was utilized for collection of data variables.The patients were subjected to SWL,using an electromagnetic lithotripter.Mean stone density(MSD),stone heterogeneity index(SHI),and VCSD were calculated by generating regions of interest on computed tomography(CT)images.Role of these factors were determined by applying the relevant statistical tests for continuous and categorical variables and a P value of<0.05 was gauged to be statistically significant.RESULTS There were a total of 407 patients included in the analysis.The mean age of the subjects in this study was 38.89±14.61 years.In total,165 out of the 407 patients could not achieve stone free status.The successful group had a significantly lower stone volume as compared to the unsuccessful group(P<0.0001).Skin to stone distance was not dissimilar among the two groups(P=0.47).MSD was significantly lower in the successful group(P<0.0001).SHI and VCSD were both significantly higher in the successful group(P<0.0001).CONCLUSION VCSD,a useful CT based parameter,can be utilized to gauge stone fragility and hence the prediction of SWL outcomes.

Local Existence of the Shock Front Solution to the Axi-symmetrical Piston Problem in Compressible Flow

In this paper,we study a kind of 2-dimensional axi-symmetrical piston problem in com- pressible flow.The corresponding mathematical model is the well-known Euler system.With the Newton iteration procedure and energy estimate,we give the local existence of the shock front solution to this problem.

Multiple Shock Fronts for Hyperbolic Conservation Laws in Higher Dimensional Space

The local existence of multiple shock fronts for hyperbolic conservation laws in higher dimensional space is established under the assumption that its frozen problem produces multiple uniformly stable planar shock fronts.

Stability of oblique shock front

The stability of the weak planar oblique shock front with respect to the perturbation of the wall is discussed. By the analysis of the formation and the global construction of shock and its asymptotic behaviour for stationary supersonic flow along a smooth rigid wall we obtain the stability of the solution containing a weak planar shock front. The stability can be used to single out a physically reasonable solution together with the entropy condition.

Optical emission spectrometric diagnosis of laser-induced plasma and shock front produced at moderate pressure

We present a non-contact optical investigation of laser-induced plasma at moderate Ar pressure ranging from 1 to 100 Pa.The significant shock front and spatial fractionation among the different charged ions are demonstrated at the pressure of 20 Pa.The collisions between Si IV ions and ambient Ar atoms generate distinct and excited ArⅡions,fresh SiⅢions,and electrons at the dense layer.The electron density peaks at the position of the shock front,indicating that the collision that yields electrons is dominant over the recombination process in the region of the shock layer and its immediate vicinity.

Propagation Properties of Shock Waves in Polyurethane Foam based on Atomistic Simulations

Porous materials are widely used in the field of protection because of their excellent energy absorption characteristics.In this work,a series of polyurethane microscopic models are established and the effect of porosity on the shock waves is studied with classical molecular dynamics simulations.Firstly,shock Hugoniot relations for different porosities are obtained,which compare well with the experimental data.The pores collapse and form local stress wave,which results in the complex multi-wave structure of the shock wave.The microstructure analysis shows that the local stress increases and the local velocity decreases gradually during the process of pore collapse to complete compaction.Finally,it leads to stress relaxation and velocity homogenization.The shock stress peaks can be fitted with two exponential functions,and the amplitude of attenuation coefficient decreases with the increase of density.Besides,the pore collapse under shock or non-shock are discussed by the entropy increase rate of the system.The energy is dissipated mainly through the multiple interactions of the waves under shock.The energy is dissipated mainly by the friction between atoms under non-shock.

Experimental investigation on weak shock wave mitigation characteristics of flexible polyurethane foam and polyurea

In recent years,explosion shock wave has been considered as a signature injury of the current military conflicts.Although strong shock wave is lethal to the human body,weak shock wave can cause many more lasting consequences.To investigate the protection ability and characteristics of flexible materials and structures under weak shock wave loading,the blast wave produced by TNT explosive is loaded on the polyurethane foam with the density of 200.0 kg/m3(F-200)and 400.0 kg/m3(F-400),polyurea with the density of 1100.0 kg/m^(3)(P-1100)and structures composed of the two materials,which are intended for individual protection.Experimental results indicate that the shock wave is attenuated to weak pressure disturbance after interacting with the flexible materials which are not damaged.The shock wave protective capability of single-layer materials is dependent on their thickness,density and microscopic characteristics.The overpressure,maximum pressure rise rate and impulse of transmitted wave decrease exponentially with increase in sample thickness.For the same thickness,F-400 provides better protective capability than F-200 while P-1100 shows the best protective capability among the three materials.In this study,as the materials are not destroyed,F-200 with a thickness more than10.0 mm,F-400 with a thickness more than 4.0 mm,and P-1100 with a thickness more than 1.0 mm can attenuate the overpressure amplitude more than 90.0%.Further,multi-layer flexible composites are designed.Different layer layouts of designed structures and layer thickness of the single-layer materials can affect the protective performance.Within the research range,the structure in which polyurea is placed on the impact side shows the optimal shock wave protective performance,and the thicknesses of polyurea and polyurethane foam are 1.0 mm and 4.0 mm respectively.The overpressure attenuation rate reached maximum value of 93.3%and impulse attenuation capacity of this structure are better than those of single-layer polyurea and polyurethane foam with higher areal density.

Thermally-induced cracking behaviors of coal reservoirs subjected to cryogenic liquid nitrogen shock

The benefits of using cryogenic liquid nitrogen shock to enhance coal permeability have been confirmed from experimental perspectives.In this paper,we develop a fully coupled thermo-elastic model in combination with the strain-based isotropic damage theory to uncover the cooling-dominated cracking behaviors through three typical cases,i.e.coal reservoirs containing a wellbore,a primary fracture,and a natural fracture network,respectively.The progressive cracking processes,from thermal fracture initiation,propagation or cessation,deflection,bifurcation to multi-fracture interactions,can be well captured by the numerical model.It is observed that two hierarchical levels of thermal fractures are formed,in which the number of shorter thermal fractures consistently exceeds that of the longer ones.The effects of coal properties related to thermal stress levels and thermal diffusivity on the fracture morphology are quantified by the fracture fractal dimension and the statistical fracture number.The induced fracture morphology is most sensitive to changes in the elastic modulus and thermal expansion coefficient,both of which dominate the complexity of the fracture networks.Coal reservoir candidates with preferred thermal-mechanical properties are also recommended for improving the stimulation effect.Further findings are that there exists a critical injection temperature and a critical in-situ stress difference,above which no thermal fractures would be formed.Preexisting natural fractures with higher density and preferred orientations are also essential for the formation of complex fracture networks.The obtained results can provide some theoretical support for cryogenic fracturing design in coal reservoirs.

Numerical and experimental investigation into the evolution of the shock wave when a muzzle jet impacts a constrained moving body

The gun-track launch system is a new special launch device that connects the track outside the muzzle.Because it is constrained by the track,the characteristics of development of the muzzle jet differ from those of the traditional muzzle jet.Specifically,it changes from freely developing to doing so in a constrained manner,where this results in an asymmetric direction of flow as well as spatio-temporal coupling-induced interference between various shock waves and the formation of vortices.In this background,the authors of this article formulate and consider the development and characteristics of evolution of the muzzle jet as it impacts a constrained moving body.We designed simulations to test the gun-track launch system,and established a numerical model based on the dynamic grid method to explore the development and characteristics of propagation of disturbances when the muzzle jet impacted a constrained moving body.We also considered models without a constrained track for the sake of comparison.The results showed that the muzzle jet assumed a circumferential asymmetric shape,and tended to develop in the area above the muzzle.Because the test platform was close to the ground,the muzzle jet was subjected to reflections from it that enhanced the development and evolution of various forms of shock waves and vortices in the muzzle jet to exacerbate its rate of distortion and asymmetric characteristics.This in turn led to significant differences in the changes in pressure at symmetric points that would otherwise have been identical.The results of a comparative analysis showed that the constrained track could hinder the influence of reflections from the ground on the muzzle jet to some extent,and could reduce the velocity of the shock waves inducing the motion of the muzzle as well as the Mach number of the moving body.The work here provides a theoretical basis and the requisite technical support for applications of the gun-track launch system.It also sheds light on the technical bottlenecks that need to be considered to recover high-value warheads.

Reflection of Shock Fronts in a van der Waals Fluid

In this paper,the reflection phenomenon of a vapor shock front(both sides of the front are in the vapor phase)in a van der Waals fluid is considered.Both the1-dimensional case and the multidimensional case are investigated.The authors find that under certain conditions,the reflected wave can be a single shock,or a single subsonic phase boundary,or one weak shock together with one subsonic phase boundary,which depends on the strength of the incident shock.This is different from the known result for the reflection of shock fronts in a gas dynamical system due to Chen in 1989.

Reconstructing shock front of unstable detonations based on multi-layer perceptron

The dynamics of frontal and transverse shocks in gaseous detonation waves is a complex phenomenon bringing many difficulties to both numerical and experimental research.Advanced laser-optical visualization of detonation structure may provide certain information of its reactive front,but the corresponding lead shock needs to be reconstructed building the complete flow field.Using the multi-layer perceptron(MLP)approach,we propose a shock front reconstruction method which can predict evolution of the lead shock wavefront from the state of the reactive front.The method is verified through the numerical results of one-and two-dimensional unstable detonations based on the reactive Euler equations with a one-step irreversible chemical reaction model.Results show that the accuracy of the proposed method depends on the activation energy of the reactive mixture,which influences prominently the cellular detonation instability and hence,the distortion of the lead shock surface.To select the input variables for training and evaluate their influence on the effectiveness of the proposed method,five groups,one with six variables,and the other with four variables,are tested and analyzed in the MLP model.The trained MLP is tested in the cases with different activation energies,demonstrates the inspiring generalization capability.This paper offers a universal framework for predicting detonation frontal evolution and provides a novel way to interpret numerical and experimental results of detonation waves.

Experimental and numerical study on protective effect of RC blast wall against air shock wave

Prototype experiments were carried out on the explosion-proof performance of the RC blast wall.The mass of TNT detonated in the experiments is 5 kg and 20 kg respectively.The shock wave overpressure was tested in different regions.The above experiments were numerically simulated,and the simulated shock wave overpressure waveforms were compared with that tested and given by CONWEP program.The results show that the numerically simulated waveform is slightly different from the test waveform,but similar to CONWEP waveform.Through dimensional analysis and numerical simulation under different working conditions,the equation for the attenuation rate of the diffraction overpressure behind the blast wall was obtained.According to the corresponding standards,the degree of casualties and the damage degree of the brick concrete building at a certain distance behind the wall can be determined when parameters are set.The above results can provide a reference for the design and construction of the reinforced concrete blast wall.

Mechanical Properties and Thermal Shock Resistance of SrAl_(2)Si_(2)O_(8) Reinforced BN Ceramic Composites

Hexagonal boron nitride(h-BN)ceramics have become exceptional materials for heat-resistant components in hypersonic vehicles,owing to their superior thermal stability and excellent dielectric properties.However,their densification during sintering still poses challenges for researchers,and their mechanical properties are rather unsatisfactory.In this study,SrAl_(2)Si_(2)O_(8)(SAS),with low melting point and high strength,was introduced into the h-BN ceramics to facilitate the sintering and reinforce the strength and toughness.Then,BN-SAS ceramic composites were fabricated via hot press sintering using h-BN,SrCO_(3),Al_(2)O_(3),and SiO_(2) as raw materials,and effects of sintering pressure on their microstructure,mechanical property,and thermal property were investigated.The thermal shock resistance of BN-SAS ceramic composites was evaluated.Results show that phases of as-preparedBN-SAS ceramic composites are h-BN and h-SrAl_(2)Si_(2)O_(8).With the increase of sintering pressure,the composites’densities increase,and the mechanical properties shew a rising trend followed by a slight decline.At a sintering pressure of 20 MPa,their bending strength and fracture toughness are(138±4)MPa and(1.84±0.05)MPa·m^(1/2),respectively.Composites sintered at 10 MPa exhibit a low coefficient of thermal expansion,with an average of 2.96×10^(-6) K^(-1) in the temperature range from 200 to 1200℃.The BN-SAS ceramic composites prepared at 20 MPa display higher thermal conductivity from 12.42 to 28.42 W·m^(-1)·K^(-1) within the temperature range from room temperature to 1000℃.Notably,BN-SAS composites exhibit remarkable thermal shock resistance,with residual bending strength peaking and subsequently declining sharply under a thermal shock temperature difference ranging from 600 to 1400℃.The maximum residual bending strength is recorded at a temperature difference of 800℃,with a residual strength retention rate of 101%.As the thermal shock temperature difference increase,the degree of oxidation on the ceramic surface and cracks due to thermal stress are also increased gradually.

Strong shock propagation for the finite-source circular blast in a confined domain

The circular explosion wave produced by the abrupt discharge of gas from a high-temperature heat source serves as a crucial model for addressing explosion phenomena in compressible flow.The reflection of the primary shock and its propagation within a confined domain are studied both theoretically and numerically in this research.Under the assumption of strong shock,the scaling law governing propagation of the main shock is proposed.The dimensionless frequency of reflected shock propagation is associated with the confined distance.The numerical simulation for the circular explosion problem in a confined domain is performed for validation.Under the influence of confinement,the principal shock wave systematically undergoes reflection within the domain until it weakens,leading to the non-monotonic attenuation of kinetic energy in the explosion fireball and periodic oscillations of the fireball volume with a certain frequency.The simulation results indicate that the frequency of kinetic energy attenuation and the volume oscillation of the explosive fireball align consistently with the scaling law.

A rat model of multicompartmental traumatic injury and hemorrhagic shock induces bone marrow dysfunction and profound anemia

Background:Severe trauma is associated with systemic inflammation and organ dysfunction.Preclinical rodent trauma models are the mainstay of postinjury research but have been criticized for not fully replicating severe human trauma.The aim of this study was to create a rat model of multicompartmental injury which recreates profound traumatic injury.Methods:Male Sprague-Dawley rats were subjected to unilateral lung contusion and hemorrhagic shock(LCHS),multicompartmental polytrauma(PT)(unilateral lung contusion,hemorrhagic shock,cecectomy,bifemoral pseudofracture),or na?ve controls.Weight,plasma toll-l ike receptor 4(TLR4),hemoglobin,spleen to body weight ratio,bone marrow(BM)erythroid progenitor(CFU-GEMM,BFU-E,and CFU-E)growth,plasma granulocyte colony-stimulating factor(G-CSF)and right lung histologic injury were assessed on day 7,with significance defined as p values<0.05(*).Results:Polytrauma resulted in markedly more profound inhibition of weight gain compared to LCHS(p=0.0002)along with elevated plasma TLR4(p<0.0001),lower hemoglobin(p<0.0001),and enlarged spleen to body weight ratios(p=0.004).Both LCHS and PT demonstrated suppression of CFU-E and BFU-E growth compared to naive(p<0.03,p<0.01).Plasma G-CSF was elevated in PT compared to both na?ve and LCHS(p<0.0001,p=0.02).LCHS and PT demonstrated significant histologic right lung injury with poor alveolar wall integrity and interstitial edema.Conclusions:Multicompartmental injury as described here establishes a reproducible model of multicompartmental injury with worsened anemia,splenic tissue enlargement,weight loss,and increased inflammatory activity compared to a less severe model.This may serve as a more effective model to recreate profound traumatic injury to replicate the human inflammatory response postinjury.