Semantic model and optimization of creative processes at mathematical knowledge formation

The aim of this work is mathematical education through the knowledge system and mathematical modeling. A net model of formation of mathematical knowledge as a deductive theory is suggested here. Within this model the formation of deductive theory is represented as the development of a certain informational space, the elements of which are structured in the form of the orientated semantic net. This net is properly metrized and characterized by a certain system of coverings. It allows injecting net optimization parameters, regulating qualitative aspects of knowledge system under consideration. To regulate the creative processes of the formation and realization of mathematical know- edge, stochastic model of formation deductive theory is suggested here in the form of branching Markovian process, which is realized in the corresponding informational space as a semantic net. According to this stochastic model we can get correct foundation of criterion of optimization creative processes that leads to “great main points” strategy (GMP-strategy) in the process of realization of the effective control in the research work in the sphere of mathematics and its applications.

Structures and Properties of Iron Matrix Composites with Tungsten Carbide Particle by EPC-V Process

In this paper the Expendable Pattern Casting with dry sand Vacuum(EPC-V) process is used to manufacture iron matrix composites with tungsten carbide particle.Microstructures of the composites layers were analyzed.The abrasive wear resistance of the composites layers were tested and compared with that of high chromium cast iron.The results show that the iron matrix composites with tungsten carbide particle have high hardness.The abrasive wear resistance of composites with tungsten carbide particle is higher than that of high chromium cast iron.The properties of the matrix materials have been improved remarkably.

Influence of core box vents distribution on flow dynamics of core shooting process based on experiment and numerical simulation

Core shooting process plays a decisive role in the quality of sand cores, and core box vents distribution is one of the most important factor determining the effectiveness of core shooting process. In this paper, the influence of core box vents distribution on the flow dynamics of core shooting process was investigated based on in situ experimental observations with transparent core box, high-speed camera and pressure measuring system. Attention was focused on the variation of both the flow behavior of sand and pressure curves due to different vents distribution. Taking both kinetic and frictional stress into account, a kinetic-frictional constitutive model was established to describe the internal momentum transfer in the solid phase. Two-fluid model(TFM) simulation was then performed and good agreement was achieved between the experimental and simulated results on both the flow behavior of sand and the pressure curves. It was found that vents distribution has direct effect on the pressure difference of different locations in the core box, which determines the buoyancy force exerting on the sand particles and significantly influences the filling process of core sand.

The assessment of time dependent flow of Williamson fluid with radiative blood flow against a wedge

The present pagination reports both Brownian diffusion and thermophoresis aspects subject to magneto hydrodynamic Williamson fluid model.Assuming the flow is unsteady and blood is treated as Williamson fluid over a wedge with radiation.The governing equations are transformed into ordinary differential equations by using similarity variables.The analytical solutions of the transformed governing equations are obtained by using the RK 4th order method along with shooting technique solver.The effects of various physical parameters such as Hartmann number,local Weissenberg number,radiation parameter,unsteadiness parameter,Prandtl number,Lewis number,Brownian diffusion,thermophoresis,wedge angle parameter,moving wedge parameter,on velocity,temperature,concentration,skin friction,heat transfer rate and mass transfer rate have been discussed in detail.The velocity and temperature profile deprives for larger We and an opposite trend is observed for concentration.The radiation parameter is propositional to temperature and a counter behaviour is observed for Pr.

A retrospective view on the history of natural sciences in XX-XXI

The presented paper is dedicated to a new ret-rospective view on the history of natural sci-ences in XX-XXI cc, partially including the sci-ence philosophy (mainly, the problems of the scientific realism, i.e. the correspondence of science to reality) and also a novel scheme for different classes of sciences with different ob-jects and paradigms. There are analyzed the chosen “great” and “grand” problems of phys-ics (including the comprehension of quantum mechanics, with a recently elaborated new chapter, connected with time as a quantum obs- ervable and time analysis of quantum processes) and also of natural sciences as a whole. The particular attention is paid to the interpretation questions and slightly to the aspects, inevitably connected with the world- views of the res- earchers (which do often constitute a part of the interpretation questions).

他们不再是孩子了 关于“新失业群体”现状的社会学报告

The “New Unemployed” consists of young people with low education in the Chinese cities. They differ from the cohorts of their parents because they have no work experiences in any state- or collective-owned enterprise, and are subject to completely different policies designated by the government. Investigations of their daily living lead to the conclusion that the “New Unemployed” has gone through a “system withdrawal” process. They are now facing an environment of “system vacuum” that none of other unemployed groups has ever encountered before. The author emphasizes in the paper a strategic employment principle of “For Future Generations” so that focused attention and care can be provided and this toughest challenge in China can be dealt with.

Applications of Mogulskii, and Kurtz-Feng Large Deviation Results to Risk Reserve Processes with Aggregate Claims

In this paper we examine the large deviations principle (LDP) for sequences of classic Cramér-Lundberg risk processes under suitable time and scale modifications, and also for a wide class of claim distributions including (the non-super- exponential) exponential claims. We prove two large deviations principles: first, we obtain the LDP for risk processes on D∈[0,1] with the Skorohod topology. In this case, we provide an explicit form for the rate function, in which the safety loading condition appears naturally. The second theorem allows us to obtain the LDP for Aggregate Claims processes on D∈[0,∞) with a different time-scale modification. As an application of the first result we estimate the ruin probability, and for the second result we work explicit calculations for the case of exponential claims.

Applications of advanced signal processing and machine learning in the neonatal hypoxic-ischemic electroencephalography

Perinatal hypoxic-ischemic-encephalopathy significantly contributes to neonatal death and life-long disability such as cerebral palsy. Advances in signal processing and machine learning have provided the research community with an opportunity to develop automated real-time identification techniques to detect the signs of hypoxic-ischemic-encephalopathy in larger electroencephalography/amplitude-integrated electroencephalography data sets more easily. This review details the recent achievements, performed by a number of prominent research groups across the world, in the automatic identification and classification of hypoxic-ischemic epileptiform neonatal seizures using advanced signal processing and machine learning techniques. This review also addresses the clinical challenges that current automated techniques face in order to be fully utilized by clinicians, and highlights the importance of upgrading the current clinical bedside sampling frequencies to higher sampling rates in order to provide better hypoxic-ischemic biomarker detection frameworks. Additionally, the article highlights that current clinical automated epileptiform detection strategies for human neonates have been only concerned with seizure detection after the therapeutic latent phase of injury. Whereas recent animal studies have demonstrated that the latent phase of opportunity is critically important for early diagnosis of hypoxic-ischemic-encephalopathy electroencephalography biomarkers and although difficult, detection strategies could utilize biomarkers in the latent phase to also predict the onset of future seizures.

GPU based numerical simulation of core shooting process

Core shooting process is the most widely used technique to make sand cores and it plays an important role in the quality of sand cores. Although numerical simulation can hopefully optimize the core shooting process, research on numerical simulation of the core shooting process is very limited. Based on a two-fluid model(TFM) and a kinetic-friction constitutive correlation, a program for 3D numerical simulation of the core shooting process has been developed and achieved good agreements with in-situ experiments. To match the needs of engineering applications, a graphics processing unit(GPU) has also been used to improve the calculation efficiency. The parallel algorithm based on the Compute Unified Device Architecture(CUDA) platform can significantly decrease computing time by multi-threaded GPU. In this work, the program accelerated by CUDA parallelization method was developed and the accuracy of the calculations was ensured by comparing with in-situ experimental results photographed by a high-speed camera. The design and optimization of the parallel algorithm were discussed. The simulation result of a sand core test-piece indicated the improvement of the calculation efficiency by GPU. The developed program has also been validated by in-situ experiments with a transparent core-box, a high-speed camera, and a pressure measuring system. The computing time of the parallel program was reduced by nearly 95% while the simulation result was still quite consistent with experimental data. The GPU parallelization method can successfully solve the problem of low computational efficiency of the 3D sand shooting simulation program, and thus the developed GPU program is appropriate for engineering applications.

Genomic Instability in Cancer II: 4N-Skewed (90°) Reductive Division via Fragile Sites to Fitness Increase for Solid and Hematological Cancer Beginnings

The objective herein was to connect the ontogeny process of diplochromosomal, amitotic, 4n-skewed division-system, to cytogenetic deficiency lesions in satellite, repetitive DNAs, especially in the chromosomal fragile sites, some 100 distributed over the genome. These latter studies had shown that chemical induced replication-stress led to un-replicated lesions in these fragile sites, which from inaccurate repair processes caused genomic instability. In the chain of events of the ontogeny process to the special tetraploidy, it was proposed that primary damaged human cells could undergo replication stress from repair-process present during cell replication, a suggestion verified by X-ray damaged cells producing the unstable fragile sites (see text). The cancer-importance for therapy is recognition of cell cycle change for the 4n derivative fitness-gained, diploid progeny cells. An open question is whether RB controlling G1 to S-period is mutated at this suggested tumorigenesis initiating phase, and if so, with what consequences for therapy. The fragile site studies further showed that repair of repetitive DNAs could produce two types of genomic changes: single gene mutations and CNVs, which were here shown to be chromosomally located on “borders” to repairing satellite lesions. This genomic placement was found to correspond to mutations identified in tumor sequencing (p53, Rb, MYC), favoring a bad luck location for their cancer “mutational nature”. The CNVs in cancers, are here seen as molecular expressions of long-known cytogenetic HSRs and DMs also with demonstrated origin from amplifications of single genes. Over-expression of oncogenes was hinted of being from duplications, but Drosophila genetics demonstrated the opposite, gene inactivation. The reduced eye-size from dominant, BAR-Ultra-Bar-eye phenotypes, was caused by duplications, inactivating the genetic system for eye-size. The finding of CNVs showing “evasion” of the immune system suggests, inactivation of immune-determining genetics. Since mutated genes on borders to satellite DNAs are a fact in hematological cancers, the 4n-skewed division-system is suggested to replace debated leukemogenesis with fitness-gain from molecular mutations. For these cancers the question is how normal bone marrow cells attain genomic damage for special tetraploidy, which was referred to studies of cells moving in artificial marrow-like substrate, needing serious attention.

GIS Based Landslide Susceptibility Mapping with Application of Analytical Hierarchy Process in District Ghizer, Gilgit Baltistan Pakistan

District Ghizer is a rugged mountainous territory which experiences several landslides each year. There are 16 major landslide areas and 53 villages that are at high risk to hazards. Keeping in view the severity of natural hazards, the present study was designed to generate landslide susceptibility map based on twelve causative factors viz., slope, aspect, elevation, drainage network, Stream Power Index (SPI), Topographic Wetness Index (TWI), lithological units, fault lines, rainfall, road network, land cover and soil texture. Soil texture was determined by particle size analysis and data for other factors were acquired from freely available sources. Analytical Hierarchy Process (AHP) was employed to identify major landslide causative factors in the district Ghizer. Further, a temporal assessment from 1999 till 2015 was generated to assess the impact of land cover change on landslides. It indicated that the barren soil/ exposed rocks and glaciers have reduced while the vegetation and water classes have shown increment. The total area that lies in moderate to very high landslide susceptible zones was 74.38%, while slope is the main landslide causative factor in the district Ghizer. Validation of the susceptibility map showed 88.1% of the landslides in the study area had occurred in the moderate to very high susceptible zones.

Fundamentals on Thermodynamic Processes behind Clouds’ and Rainfalls’ Formation

The prevailing idea so far about why the rainfall occurs was that after agglutination of water droplets with condensation nuclei, the size of the particle formed by the condensation nuclei connected with droplets of water increased considerably and caused its fall. This idea has led to numerous scientific publications in which empirical distribution functions of clouds’ water droplets sizes were proposed. Estimates values provided by these empirical distribution functions, in most cases, were validated by comparison with UHF Radar measurements. The condensation nuclei concept has not been sufficiently exploited and this has led meteorologists to error, in their attempt to describe the clouds, thinking that clouds were formed by liquid water droplets. Indeed, MBANE BIOUELE paradox (2005) confirms this embarrassing situation. In fact, when applying Archimedes theorem to a liquid water droplet suspended in the atmosphere, we obtain a meaningless inequality ?which makes believe that the densities of pure water in liquid and solid phases are much lower than that of the atmosphere considered at the sea level. This meaningless inequality is easy to contradict: of course, if you empty a bottle of pure liquid water in the ocean (where z is equal to 0), this water will not remain suspended in the air, i.e., application of Archimedes’ theorem allows realizing that there is no liquid (or solid) water droplet, suspended in the clouds. Indeed, all liquid (or solid) water droplets which are formed in clouds, fall under the effect of gravity and produce rains. This means that our current description of the clouds is totally wrong. In this study, we describe the clouds as a gas composed of dry air and saturated water vapor whose optical properties depend on temperature, i.e., when the temperature of a cloud decreases, the color of this gaseous system tends towards white.

超细层状材料A_2La_2Ti_3O_(10)(A=Na,K)的低温合成及表征

s: Ultrafine A2La2Ti3O10 (A=K, Na) powders with laminar structure were successfully synthesized by citric acid sol-gel method using ANO3(A=K, Na)?La(NO3)3?Ti(OBu)4 and citric acid as starting precursors. The crystalline phase of A2La2Ti3O10 can be obtained by thermal decomposition of citrate complex precursors at a relatively low temperature of 800 ℃ (600 ℃ for A=Na), about 300 ℃(500 ℃ for A=Na) lower than that of conventional solid state reaction process. The properties of the citrate precursors and the calcined powders were characterized by Infrared spectroscopy (IR), X-ray diffraction (XRD), transmission electron microscopy (TEM), thermal-gravimetric-differential thermal analysis (TG-DTA), inductively coupled plasma (ICP) and Brunauer-Emmett-Teller (BET) techniques. Results show that the average size of A2La2Ti3O10 powders obtained by citric acid sol-gel route was reduced to 200 nm×250 nm and the specific surface area was up to 19 m2·g-1. At the same time, the product was with more regular morphological characteristics. The synthesis process and the formation of A2La2Ti3O10 were also discussed. The obtained A2La2Ti3O10 was found to be transformed from A2La2Ti3O9.5 during the formation process.

Induction Heating in the Processing of Ti &Zr

Induction heating has important applications in science and industry. The method of induction heating can be successfully used for melting and heat treatment of titanium and zirconium alloys. Different applications using induction precise heating before plastic deformation are discussed in this paper. For alloys of many metals such as titanium, zirconium, niobium, tantalum, etc., it is important to provide precision heating with a high degree of homogeneity of the temperature field and strict adherence to the condition of heating. This is explained by polymorphism of the alloys based on these metals, their chemical activity at high temperatures and the specific thermal and electrical properties. It is very important for induction heating to define the extreme achievable unevenness of the temperature field. For special alloys it is necessary to use resistance furnaces for homogenization of billets’ temperature after heating in the inductors. Optimal control can be used for massive billets to reduce significantly the heating time, energy expenses and to improve the quality of the temperature field distribution. Optimization of induction heating process can be achieved by synchronous solution of the problem of optimal control and design with specially developed models.

A Study on Numerical Simulation of Core-Shooting Process

In order to evaluate the main factors influencing the core-shooting process and to optimize the design of core boxes, the fluid-particle (air-sand) model has been built based on the two-phase flow theory. The fluid phase, air, and the particulate phase, sand granules, have been treated as a continuum. By using this model, it is possible to simulate the flow and compaction behavior of sand particles during the core-shooting process. To benchmark the calculated results, the shooting process has been recorded with a digital high speed camera, and the inlet condition of sand particles has also been achieved by using the camera. The preliminary results have showed that the calculation is in agreement with the testing results.

华北克拉通晚中生代壳-幔拆离作用:岩石流变学约束

大陆岩石圈的流变学结构对于岩石圈深部过程(壳/幔过程)有着深刻的影响,直接表现在岩石圈壳-幔结构与浅部构造上。本文注意到华北克拉通晚中生代岩石圈减薄期间地壳的伸展、拆离与减薄在不同地区的宏观、微观构造及地壳岩石流变学等方面的差异表现与区域变化,以及现今和晚中生代时期岩石圈厚度的不均匀性。讨论了以水为主体的地质流体的存在对于岩石圈流变性的影响。综合克拉通东部与西部地壳/地幔厚度变化特点以及下地壳和上地幔含水性特点,阐述了晚中生代时期华北克拉通岩石圈内部壳幔耦合与解耦的规律,提出了华北岩石圈壳-幔拆离作用模型以解释华北克拉通晚中生代岩石圈减薄的基本现象与深部过程。提出区域性伸展作用是岩石圈减薄的主要动力学因素,东部地区在晚中生代伸展作用过程中壳-幔具有典型的解耦性,上部地壳、下部地壳和岩石圈地幔的变形具有显著差异性。而西部区壳幔总体具有耦合性,下地壳与岩石圈地幔共同构成流变学强度很高且难以变形的岩石圈根。

ROBUST SMITH PREDICTIVE CONTROLLER FOR PROCESS WITH INVERSE RESPONSE

Smith predictor known as the time delay compensator was extended to control the process with inverse response.Modern robust control theory was employed to design the robust controller,which has only one parameter to be determined with compromise among the rise time,undershoot,robustness and capability to reject disturbance of the closed loop system.The former two specifications can be assessed quantitatively and the latter two qualitatively.Examples show that the proposed method has significant improvements and wide applicable ranges for inverse response process.

Process simulation and energy integration in the mineral carbonation of blast furnace slag

Large quantities of blast furnace(BF) slag and CO_2 are discharged annually from iron and steel industries, along with a large amount of waste heat.The mineral carbonation of BF slag can not only reduce emissions of solid waste but also realize the in-situ fixation of CO_2 with low energy consumption if integrated with the waste heat utilization.In this study, based on our previous works, Aspen Plus was employed to simulate and optimize the carbonation process and integrate the process energy.The effects of gehlenite extraction, MgSO_4 carbonation,and aluminum ammonium sulfate crystallization were studied systematically.The simulation results demonstrate that 2.57 kg of BF slag can sequester 1 kg of CO_2, requiring 5.34 MJ of energy(3.3 MJ heat and 2.04 MJ electricity), and this energy includes the capture of CO_2 from industrial flue gases.Approximately 60 kg net CO_2 emission reduction could be achieved for the disposal of one ton of BF slag.In addition, the by-product,aluminum ammonium sulfate, is a high value-added product.Preliminary economic analysis indicates that the profit for the whole process is 1127 CNY per ton of BF slag processed.

STUDY OF THE HEAT AND HUMIDITY TRANSFER PROCESSES BETWEEN AIR AND WATER IN THE AIR WASHER

The processes of heat and humidity transfer between air and water are what to be studied mainly in the paper, we put forward some main factors which influence the processes of heat and humidity transfer in the air washer. We come to the conclusion that we can change these main factors to achieve different heat and humidity transfer processes and decide processes of heat and humidity transfer of air and water with the initial temperature of spraying water in the air washer. All these results can make things convenient for the air conditioning management.

Evaluating Watershed Vulnerability in Bernalillo County, New Mexico Using Expert Testimony, Fuzzy Analytic Hierarchy Process, and GIS

Geographic Information System (GIS) software was used to create a watershed vulnerability model for Bernalillo County, New Mexico. Watershed vulnerability was investigated as a function of soil erosion and infiltration criteria: precipitation, land slope, soil erodibility (K-factor), vegetation cover (NDVI), land use, drainage density, saturated hydraulic conductivity, and hydrologic soil group. Respective criteria weights were derived using a Fuzzy Analytic Hierarchy Process (FAHP) supported by expert opinion. A survey of 10 experts, representing New Mexico Institute of Mining and Technology (NMT), the New Mexico Bureau of Geology and Mineral Resources (NMBGMR), and the United States Geologic Survey (USGS), provided model input data for an integrated pair-wise comparison matrix for soil erosion and for infiltration. Individual criteria weights were determined by decomposing the respective fuzzy synthetic extent matrix using the centroid method. GIS layers were then combined based on criteria weights to produce maps of soil erosion potential and infiltration potential. A composite watershed vulnerability map was generated by equal weighting of each input map. Model results were categorized into five vulnerability categories: not vulnerable (N), slightly vulnerable (SV), moderately vulnerable (MV), highly vulnerable (HV), and extremely vulnerable (EV). The resulting FAHP/GIS model was used to generate a watershed vulnerability map of discrete areas in Bernalillo County, which may be vulnerable to stormwater run-off events and soil erosion. Such high volume run-off events can cause erosion damage to property and infrastructure. Alternatively, in areas near urban development, stormwater run-off may contribute non-point-source pollutant contamination of New Mexico’s surface water resources. The most problematic areas in Bernalillo County are present in the Eastern and Northwestern portions. However, less than 1% of the total area lies within the lowest and highest vulnerability categories with the majority centered around moderate vulnerability. The results of the model were compared with a previously published crisp AHP method. Both methods showed similar regional vulnerability trends. This MCDS/GIS approach is intended to provide support to local governments and decision makers in selection of suitable structural or nonstructural stormwater control measures.