A new additive technique for manufacturing of short fibre-reinforced ultra-refractory ceramics is presented.This technique allows the fabrication of solvent-free,thin(~100µm),flexible,and easy-to-handle sheets su...A new additive technique for manufacturing of short fibre-reinforced ultra-refractory ceramics is presented.This technique allows the fabrication of solvent-free,thin(~100µm),flexible,and easy-to-handle sheets suitable for fabricating homogeneous or layered structures.A large range of compositions,in terms of matrix and fibre volumetric contents,from 0%to 100%is possible.The amount of short carbon fibres incorporated in the sheets ranged from 20 to 50 vol%,whereas the fibre length ranged from 3 to 5 mm.The matrix composition investigated with this technique consisted of ZrB_(2)/SiC/Y_(2)O_(3).By increasing the fibre amount from 35 to 50 vol%,an improvement of mechanical properties was observed.Four-point flexural strength(σ)ranged from 107 to 140 MPa,depending on the amount of carbon fibres(Cf).The same holds true for the work of fracture,ranging from 108 to 253 J/m^(2).Functionally graded composites were fabricated by overlapping sheets with a fibre gradient(0%-50%).展开更多
基金support by the European Union’s Horizon 2020 committee under research and innovation programme for the project C3 HARME:Next Generation Ceramic Composites for Harsh Combustion Environment and Space (Grant No.685594).
文摘A new additive technique for manufacturing of short fibre-reinforced ultra-refractory ceramics is presented.This technique allows the fabrication of solvent-free,thin(~100µm),flexible,and easy-to-handle sheets suitable for fabricating homogeneous or layered structures.A large range of compositions,in terms of matrix and fibre volumetric contents,from 0%to 100%is possible.The amount of short carbon fibres incorporated in the sheets ranged from 20 to 50 vol%,whereas the fibre length ranged from 3 to 5 mm.The matrix composition investigated with this technique consisted of ZrB_(2)/SiC/Y_(2)O_(3).By increasing the fibre amount from 35 to 50 vol%,an improvement of mechanical properties was observed.Four-point flexural strength(σ)ranged from 107 to 140 MPa,depending on the amount of carbon fibres(Cf).The same holds true for the work of fracture,ranging from 108 to 253 J/m^(2).Functionally graded composites were fabricated by overlapping sheets with a fibre gradient(0%-50%).
