Anti-aliasing nonstationary signals detecion algorithm based on interpolation in the frequency domain using the short time Fourier transform

To eliminate the aliasing that appeared during the measurement of multi-components nonstationary signals, a novel kind of anti-aliasing algorithm based on the short time Fourier transform （STFT） is brought forward. First the physical essence of aliasing that occurs is analyzed; second the interpolation algorithm model is setup based on the Hamming window; then the fast implementation of the algorithm using the Newton iteration method is given. Using the numerical simulation the feasibility of algorithm is validated. Finally, the electrical circuit experiment shows the practicality of the algorithm in the electrical engineering.

Suppression to the cross-channel interference based on the short time Fourier transform

A new cross-channel interference suppression method is proposed to decrease the cross-channel interference in beat signals based on the short time Fourier transform （STY3＂） and the inverse short time Fourier transform （ISTFT） when the dual-orthogonal polarimetric frequency-modulated continu- ous wave （FMCW） radar adopts the opposite-slope linear frequency modulation signal pair in the simultaneous measurement mode. The STFT is applied only on the signals in the cross-interference intervals in the four polarimetric channels to decrease the computation complexity. A mask matrix for suppressing the interference is constructed using the constant false alarm ratio （CFAR） detection on the spectrograms by the STFY. The simulative results show that the cross-channel interference is effi- ciently suppressed by the proposed method. The comparison between the proposed method and the rejection method verifies the improved performance of the proposed method.

Output only modal identification and structural damage detection using time frequency & wavelet techniques

The primary objective of this paper is to develop output only modal identification and structural damage detection. Identification of multi-degree of freedom （MDOF） linear time invariant （LTI） and linear time variant （LTV--due to damage） systems based on Time-frequency （TF） techniques--such as short-time Fourier transform （STFT）, empirical mode decomposition （EMD）, and wavelets--is proposed. STFT, EMD, and wavelet methods developed to date are reviewed in detail. In addition a Hilbert transform （HT） approach to determine frequency and damping is also presented. In this paper, STFT, EMD, HT and wavelet techniques are developed for decomposition of free vibration response of MDOF systems into their modal components. Once the modal components are obtained, each one is processed using Hilbert transform to obtain the modal frequency and damping ratios. In addition, the ratio of modal components at different degrees of freedom facilitate determination of mode shape. In cases with output only modal identification using ambient/random response, the random decrement technique is used to obtain free vibration response. The advantage of TF techniques is that they arc signal based; hence, can be used for output only modal identification. A three degree of freedom 1：10 scale model test structure is used to validate the proposed output only modal identification techniques based on STFT, EMD, HT, wavelets. Both measured free vibration and forced vibration （white noise） response are considered. The secondary objective of this paper is to show the relative ease with which the TF techniques can be used for modal identification and their potential for real world applications where output only identification is essential. Recorded ambient vibration data processed using techniques such as the random decrement technique can be used to obtain the free vibration response, so that further processing using TF based modal identification can be performed.

A novel sparse filtering approach based on time-frequency feature extraction and softmax regression for intelligent fault diagnosis under different speeds

Modern agricultural mechanization has put forward higher requirements for the intelligent defect diagnosis.However,the fault features are usually learned and classified under all speeds without considering the effects of speed fluctuation.To overcome this deficiency,a novel intelligent defect detection framework based on time-frequency transformation is presented in this work.In the framework,the samples under one speed are employed for training sparse filtering model,and the remaining samples under different speeds are adopted for testing the effectiveness.Our proposed approach contains two stages:1)the time-frequency domain signals are acquired from the mechanical raw vibration data by the short time Fourier transform algorithm,and then the defect features are extracted from time-frequency domain signals by sparse filtering algorithm;2)different defect types are classified by the softmax regression using the defect features.The proposed approach can be employed to mine available fault characteristics adaptively and is an effective intelligent method for fault detection of agricultural equipment.The fault detection performances confirm that our approach not only owns strong ability for fault classification under different speeds,but also obtains higher identification accuracy than the other methods.

Underdetermined Blind Source Separation of Adjacent Satellite Interference Based on Sparseness

The problem of underdetermined blind source separation of adjacent satellite interference is proposed in this paper. Density Clustering algorithm(DC-algorithm) presented in this article is different from traditional methods. Sparseness representation has been applied in underdetermined blind signal source separation. However, some difficulties have not been considered, such as the number of sources is unknown or the mixed matrix is ill-conditioned. In order to find out the number of the mixed signals, Short Time Fourier Transform(STFT) is employed to segment received mixtures. Then, we formulate the blind source signal as cluster problem. Furthermore, we construct Cost Function Pair and Decision Coordinate System by using density clustering. At the end of this paper, we discuss the performance of the proposed method and verify the novel method based on several simulations. We verify the proposed method on numerical experiments with real signal transmission, which demonstrates the validity of the proposed method.

Product(α1,α2)-modulation spaces Dedicated to the Memory of Michel Marias

We study fundamental properties of product(α,α)-modulation spaces built by(α,α)-coverings of R× R.Precisely we prove embedding theorems between these spaces with different parameters and other classical spaces.Furthermore,we specify their duals.The characterization of product modulation spaces via the short time Fourier transform is also obtained.Families of tight frames are constructed and discrete representations in terms of corresponding sequence spaces are derived.Fourier multipliers are studied and as applications we extract lifting properties and the identification of our spaces with(fractional) Sobolev spaces with mixed smoothness.