Although the analytical solution of the starting flow of Maxwell fluid in a pipe has been derived for a long time, the effect of relaxation time λ on start-up time ts of this flow is still not well understood. Especi...Although the analytical solution of the starting flow of Maxwell fluid in a pipe has been derived for a long time, the effect of relaxation time λ on start-up time ts of this flow is still not well understood. Especially, there exist a series of jumps on the ts-λ. curve. In this paper we introduce a normalized mechanical energy by mode decomposition and mathematical analogy to describe the start-up process. An improved definition of start-up time is presented based on the normalized mechanical energy. It is proved that the ts-λ. curve contains a series of jumps if λ is larger than a critical value. The exact positions of the jumps are determined and the physical reason of the jumps is discussed.展开更多
In Discrete Multi-Tone (DMT) modulation systems, the well-known technique to overcome the Inter-Carrier Interference (ICI)/Inter-Symbol Interference (ISI) caused by the inadequate Cyclic Prefix (CP) length is to use a...In Discrete Multi-Tone (DMT) modulation systems, the well-known technique to overcome the Inter-Carrier Interference (ICI)/Inter-Symbol Interference (ISI) caused by the inadequate Cyclic Prefix (CP) length is to use a Time-Domain Equalizer (TDE) at the receiver front-end. An algorithm used to calculate the coefficients of the optimal shortening Time Domain Equalizer (TDE) was given by Melsa. However, this algorithm requires that the length of the TDE must be smaller than or equal to the memory length of the target impulse response. This paper modifies this algorithm and makes it not only fit for calculating the coefficients of the TDE with arbitrary length, but also have a much less computational time.展开更多
Gas bearings,which have the advantages of low frictional resistance and power loss,high rotational speed and high temperature operation,and long life,are more suitable than are traditional liquid lubricated bearings b...Gas bearings,which have the advantages of low frictional resistance and power loss,high rotational speed and high temperature operation,and long life,are more suitable than are traditional liquid lubricated bearings because of their high precision,high rotational speed,and special condition support.However,the problem of starting a closed-cycle compression system with gas bearings still needs to be solved for practical application.Thus,a new start-up method for a closed-cycle compression system with aerostatic gas bearings is proposed in this paper.Further,this paper presents a numerical simulation and experimental investigation of the method’s feasibility and characteristics during the start-up process when the gas tank’s initial pressure is fixed.The results show that the gas tank volume is approximately directly proportional to the start-up time allowable,and a gas tank volume sufficiently small,which not only ensures the feasibility of start-up,but also affects other components only slightly,can be obtained.A perfect combination of radial and axial loads also can be achieved to make the start-up time allowable as long as possible.R134a is a better choice for the working medium than is air,as the start-up time allowable is longer,which leads to a smaller gas tank.This research proposes a new start-up method for a closed-cycle compression system with aerostatic gas bearings which has sufficient load capacity to support system during the start-up method.展开更多
酒泉盆地南缘冲断带具有多层次的逆冲结构,包括浅层的远距离冲断系统、中层的近距离冲断系统和深层的原地冲断系统。远距离冲断系统由奥陶系和志留系构成,局部地区表现为飞来峰;近距离冲断系统由古生界和中生界构成,大部分隐伏在远距离...酒泉盆地南缘冲断带具有多层次的逆冲结构,包括浅层的远距离冲断系统、中层的近距离冲断系统和深层的原地冲断系统。远距离冲断系统由奥陶系和志留系构成,局部地区表现为飞来峰;近距离冲断系统由古生界和中生界构成,大部分隐伏在远距离冲断系统之下,局部地带以构造窗的形式出露地表,其变形样式主要为叠瓦状的冲断变形;原地冲断系统隐伏在近距离冲断系统和第四系之下,其南部的变形主要表现为双冲构造或堆垛构造,往NE方向变形逐渐简单,主要表现为断层传播褶皱和断层弯曲褶皱,前锋地带表现为三角带的突起构造。酒泉盆地南缘冲断带的变形是一个具有大缩短量的薄皮冲断系统,旱峡剖面的构造缩短量为52.7 km,缩短率为55.1%。酒泉盆地南缘冲断带的变形时期大致开始于9.0 M a,并以“前展式”向北扩张,变形时间向北变新,前锋断层开始活动时间约为8.3 M a。展开更多
文摘Although the analytical solution of the starting flow of Maxwell fluid in a pipe has been derived for a long time, the effect of relaxation time λ on start-up time ts of this flow is still not well understood. Especially, there exist a series of jumps on the ts-λ. curve. In this paper we introduce a normalized mechanical energy by mode decomposition and mathematical analogy to describe the start-up process. An improved definition of start-up time is presented based on the normalized mechanical energy. It is proved that the ts-λ. curve contains a series of jumps if λ is larger than a critical value. The exact positions of the jumps are determined and the physical reason of the jumps is discussed.
文摘In Discrete Multi-Tone (DMT) modulation systems, the well-known technique to overcome the Inter-Carrier Interference (ICI)/Inter-Symbol Interference (ISI) caused by the inadequate Cyclic Prefix (CP) length is to use a Time-Domain Equalizer (TDE) at the receiver front-end. An algorithm used to calculate the coefficients of the optimal shortening Time Domain Equalizer (TDE) was given by Melsa. However, this algorithm requires that the length of the TDE must be smaller than or equal to the memory length of the target impulse response. This paper modifies this algorithm and makes it not only fit for calculating the coefficients of the TDE with arbitrary length, but also have a much less computational time.
基金Supported by National Natural Science Foundation of China(Grant No.51706009).
文摘Gas bearings,which have the advantages of low frictional resistance and power loss,high rotational speed and high temperature operation,and long life,are more suitable than are traditional liquid lubricated bearings because of their high precision,high rotational speed,and special condition support.However,the problem of starting a closed-cycle compression system with gas bearings still needs to be solved for practical application.Thus,a new start-up method for a closed-cycle compression system with aerostatic gas bearings is proposed in this paper.Further,this paper presents a numerical simulation and experimental investigation of the method’s feasibility and characteristics during the start-up process when the gas tank’s initial pressure is fixed.The results show that the gas tank volume is approximately directly proportional to the start-up time allowable,and a gas tank volume sufficiently small,which not only ensures the feasibility of start-up,but also affects other components only slightly,can be obtained.A perfect combination of radial and axial loads also can be achieved to make the start-up time allowable as long as possible.R134a is a better choice for the working medium than is air,as the start-up time allowable is longer,which leads to a smaller gas tank.This research proposes a new start-up method for a closed-cycle compression system with aerostatic gas bearings which has sufficient load capacity to support system during the start-up method.
文摘酒泉盆地南缘冲断带具有多层次的逆冲结构,包括浅层的远距离冲断系统、中层的近距离冲断系统和深层的原地冲断系统。远距离冲断系统由奥陶系和志留系构成,局部地区表现为飞来峰;近距离冲断系统由古生界和中生界构成,大部分隐伏在远距离冲断系统之下,局部地带以构造窗的形式出露地表,其变形样式主要为叠瓦状的冲断变形;原地冲断系统隐伏在近距离冲断系统和第四系之下,其南部的变形主要表现为双冲构造或堆垛构造,往NE方向变形逐渐简单,主要表现为断层传播褶皱和断层弯曲褶皱,前锋地带表现为三角带的突起构造。酒泉盆地南缘冲断带的变形是一个具有大缩短量的薄皮冲断系统,旱峡剖面的构造缩短量为52.7 km,缩短率为55.1%。酒泉盆地南缘冲断带的变形时期大致开始于9.0 M a,并以“前展式”向北扩张,变形时间向北变新,前锋断层开始活动时间约为8.3 M a。
