The radiation and diffraction problem of a two-dimensional rectangular body with an opening floating on a semi- infinite fluid domain of finite water depth is analysed based on the linearized velocity potential theory...The radiation and diffraction problem of a two-dimensional rectangular body with an opening floating on a semi- infinite fluid domain of finite water depth is analysed based on the linearized velocity potential theory through an analytical solution procedure. The expressions for potentials are obtained by the method of variation separation, in which the unknown coefficients are determined by the boundary condition and matching requirement on the interface. The effects of the position of the hole and the gap between the body and side wall on hydrodynamic characteristics are investigated. Some resonance is observed like piston motion in a moon pool and sloshing in a closed tank because of the existence of restricted fluid domains.展开更多
A novel numerical model based on the image Green function and first-order Taylor expansion boundary element method(TEBEM), which can improve the accuracy of the hydrodynamic simulation for the non-smooth body, was dev...A novel numerical model based on the image Green function and first-order Taylor expansion boundary element method(TEBEM), which can improve the accuracy of the hydrodynamic simulation for the non-smooth body, was developed to calculate the side wall effects on first-order motion responses and second-order drift loads upon offshore structures in the wave tank. This model was confirmed by comparing it to the results from experiments on hydrodynamic coefficients, namely the first-order motion response and second-order drift load upon a hemisphere, prolate spheroid, and box-shaped barge in the wave tank. Then,the hydrodynamics of the KVLCC2 model were also calculated in two wave tanks with different widths. It was concluded that this model can predict the hydrodynamics for offshore structures effectively, and the side wall has a significant impact on the firstorder quantities and second-order drift loads, which satisfied the resonant rule.展开更多
The free-surface Green function method is widely used in solving the radiation or diffraction problems caused by a ship or ocean structure oscillating on the waves. In the context of inviscid potential flow, hydrodyna...The free-surface Green function method is widely used in solving the radiation or diffraction problems caused by a ship or ocean structure oscillating on the waves. In the context of inviscid potential flow, hydrodynamic problems such as multi-body interaction and tank side wall effect cannot be properly dealt with based on the traditional free-surface frequency domain Green function method, in which the water viscosity is omitted and the energy dissipation effect is absent. In this paper, an open-sea Green function with viscous dissipation was presented within the theory ofvisco-potential flow. Then the tank Green function with a partial reflection from the side walls in wave tanks was formulated as a formal sum of open-sea Green functions representing the infinite images between two parallel side walls of the source in the tank. The new far-field characteristics of the tank Green function is vitally important fur improving the validity of side-wall effects evaluation, which can be used in supervising the tank model tests.展开更多
Extended pelvic side wall excision is a useful technique for treatment of recurrent or advanced rectal cancer involving sciatic notch and does not compromise the dissection of major pelvic vessels and vascular control.
Although the solid-state lighting market is growing rapidly, it is still difficult to obtain ultra-high brightness white light emitting diodes(LEDs). V-pits are inevitably introduced during the metalorganic chemical v...Although the solid-state lighting market is growing rapidly, it is still difficult to obtain ultra-high brightness white light emitting diodes(LEDs). V-pits are inevitably introduced during the metalorganic chemical vapor deposition(MOCVD)growth of multiple quantum wells(MQWs) in Ⅲ–nitride LEDs, and thus affecting the carrier dynamics of the LEDs.Specifically designed structures are fabricated to study the influence of the V-pits on the hole transportation and efficiency droop, and double quantum wells(QWs) are used to monitor the transportation and distribution of holes based on their emission intensity. It is found that when compared with the planar QWs, the injection of holes into the QWs through the side walls of the V-pits changes the distribution of holes among the MQWs. This results in a higher probability of hole injection into the middle QWs and enhanced emission therein, and, consequently, a lower efficiency droop.展开更多
基金supported by the Lloyd's Register Educational Trust (The LRET) through the joint centre involving University College London, Shanghai Jiao Tong University and Harbin Engineering University
文摘The radiation and diffraction problem of a two-dimensional rectangular body with an opening floating on a semi- infinite fluid domain of finite water depth is analysed based on the linearized velocity potential theory through an analytical solution procedure. The expressions for potentials are obtained by the method of variation separation, in which the unknown coefficients are determined by the boundary condition and matching requirement on the interface. The effects of the position of the hole and the gap between the body and side wall on hydrodynamic characteristics are investigated. Some resonance is observed like piston motion in a moon pool and sloshing in a closed tank because of the existence of restricted fluid domains.
基金the National Natural Science Foundation of China (Grant No.51709064)the Numerical Tank Project sponsored by the Ministry of Industry and Information Technology (MIIT)of P.R.China.
文摘A novel numerical model based on the image Green function and first-order Taylor expansion boundary element method(TEBEM), which can improve the accuracy of the hydrodynamic simulation for the non-smooth body, was developed to calculate the side wall effects on first-order motion responses and second-order drift loads upon offshore structures in the wave tank. This model was confirmed by comparing it to the results from experiments on hydrodynamic coefficients, namely the first-order motion response and second-order drift load upon a hemisphere, prolate spheroid, and box-shaped barge in the wave tank. Then,the hydrodynamics of the KVLCC2 model were also calculated in two wave tanks with different widths. It was concluded that this model can predict the hydrodynamics for offshore structures effectively, and the side wall has a significant impact on the firstorder quantities and second-order drift loads, which satisfied the resonant rule.
基金Supported by NSFC Project(51009037)"111"Program(B07019)
文摘The free-surface Green function method is widely used in solving the radiation or diffraction problems caused by a ship or ocean structure oscillating on the waves. In the context of inviscid potential flow, hydrodynamic problems such as multi-body interaction and tank side wall effect cannot be properly dealt with based on the traditional free-surface frequency domain Green function method, in which the water viscosity is omitted and the energy dissipation effect is absent. In this paper, an open-sea Green function with viscous dissipation was presented within the theory ofvisco-potential flow. Then the tank Green function with a partial reflection from the side walls in wave tanks was formulated as a formal sum of open-sea Green functions representing the infinite images between two parallel side walls of the source in the tank. The new far-field characteristics of the tank Green function is vitally important fur improving the validity of side-wall effects evaluation, which can be used in supervising the tank model tests.
文摘Extended pelvic side wall excision is a useful technique for treatment of recurrent or advanced rectal cancer involving sciatic notch and does not compromise the dissection of major pelvic vessels and vascular control.
基金Project supported by the National Key Research and Development Project of China(Grant No.2017YFB0403303)the Key Technologies Research and Development Program of Tianjin,China(Grant Nos.18YFZCGX00760 and 18YFZCGX00400)
文摘Although the solid-state lighting market is growing rapidly, it is still difficult to obtain ultra-high brightness white light emitting diodes(LEDs). V-pits are inevitably introduced during the metalorganic chemical vapor deposition(MOCVD)growth of multiple quantum wells(MQWs) in Ⅲ–nitride LEDs, and thus affecting the carrier dynamics of the LEDs.Specifically designed structures are fabricated to study the influence of the V-pits on the hole transportation and efficiency droop, and double quantum wells(QWs) are used to monitor the transportation and distribution of holes based on their emission intensity. It is found that when compared with the planar QWs, the injection of holes into the QWs through the side walls of the V-pits changes the distribution of holes among the MQWs. This results in a higher probability of hole injection into the middle QWs and enhanced emission therein, and, consequently, a lower efficiency droop.
