Experimental Study on Vortex-Induced Vibration of Rough Risers with Coupling Interference Effect Under Side-by-Side Arrangement

A vortex-induced vibration(VIV)experiment of rough risers with coupling interference effect under a side-by-side arrangement was carried out in a wave-current combined flume.The roughness of the riser was characterized by arranging different specifications of surface attachments on the surface of the riser.Rough risers with three different roughnesses were arranged side by side with smooth risers to explore the VIV response of the riser under the combined action of roughness and interference effect,and to reveal the coupling mechanism between roughness and interference effect.The experimental results show that,compared with that of a smooth riser,the VIV of a rough riser under the coupling interference effect has a wider"lock-in"region,and the displacement decreases more significantly at a high reduced velocity,which is more likely to excite higher-order modes and frequency responses.In addition,the displacement response and frequency response of the smooth riser are not significantly affected by wake interference from the rough riser,which is caused by the decrease of the wake region due to the delay of the boundary layer separation point of the rough riser.

Time-Domain Simulation for Coupled Motions of Three Barges Moored Side-by-Side in Floatover Operation

Simulating the coupled motions of multiple bodies in the time domain is a complex problem because of the strong hydrodynamic interactions and coupled effect of various mechanical connectors. In this study, we investigate the hydrodynamic responses of three barges moored side-by-side in a floatover operation in the frequency and time domains. In the frequency domain, the damping lid method is adopted to improve the overestimated hydrodynamic coefficients calculated from conventional potential flow theory. A time-domain computing program based on potential flow theory and impulse theory is compiled for analyses that consider multibody hydrodynamic interactions and mechanical effects from lines and fenders. Correspondingly, an experiment is carried out for comparison with the numerical results. All statistics, time series, and power density spectra from decay and irregular wave tests are in a fairly good agreement.

Numerical investigation of influence of wave directionality on the water resonance at a narrow gap between two rectangular barges

A three-dimensional time-domain potential flow model with second-order nonlinearity was applied to simulate the wave resonance in a gap between two side-by-side rectangular barges. In the model, the velocity potential was decomposed into the incident potential and unknown scattered potential which was obtained by solving the boundary integral equation. The fourth-order predict-correct method was applied to enforce the free surface conditions in the time integration. The influence of the wave direction on the first and second-order gap surface elevations was investigated. The results reveal that the incident wave angle does not affect the resonant wave frequency and the maximum surface elevation at resonance always occurs at the middle location along the gap. However, the corresponding maximum wave surface elevation at resonance varies with the incident wave angle. The location of the maximum wave elevation shifts either upstream or downstream along the gap, depending on the relative magnitude of incident wave frequency to the resonant frequency.

The influence of up-wave barge motion on the water resonance at a narrow gap between two rectangular barges underwaves in the sea

A three-dimensional time-domain potential flow model is developed and applied to simulate the wave resonance in a gap between two side-by-side rectangular barges. A fourth-order predict-correct method is implemented to update free surface boundary conditions. The response of an up-wave barge is predicted by solving the motion equation with the Newmark-β method. Following the validation of the developed numerical model for wave radiation and diffraction around two side-by-side barges, the influence of up-wave barge motion on the gap surfaceresonance is investigated in two different locations of the up-wave barge relative to the back-wave barge at various frequencies. The results reveal that the freely floating up-wave barge significantly influences the resonance frequency and the resonance wave amplitude. Simultaneously, the up-wave barge located in the middle of the back-wave barge leads to a reduction in the resonance wave amplitude and motion response when compared with other configurations.

Hydrodynamic Interactions of Three Barges in Close Proximity in A Floatover Installation

The hydrodynamics of side-by-side barges are much more complex than those of a single barge in waves because of wave shielding, viscous effects and water resonance in the gap. In the present study, hydrodynamic coefficients in the frequency domain were calculated for both the system of multiple bodies and the isolated body using both low-order and higher-order boundary-element methods with different element numbers. In these calculations, the damping-lid method was used to modify the free-surface boundary conditions in the gap and to make the hydrodynamic results more reasonable. Then far-field, mid-field and near-field methods were used to calculate wave-drift forces for both the multi-body system and the isolated body. The results show that the higher-order method has faster convergence speed than the low-order method for the multi-body case. Comparison of different methods of computing drift force showed that mid-field and far-field methods have better convergence than the near-field method. In addition, corresponding model tests were performed in the Deepwater Offshore Basin at Shanghai Jiao Tong University. Comparison between numerical and experimental results showed good agreement.

Use of Helical Strakes for FIV Suppression of Two Inclined Flexible Cylinders in A Side-by-Side Arrangement

The experimental studies on flow-induced vibrations(FIV) reduction of two side-by-side flexible cylinders inclined at 45° by using the helical strakes were carried out in a towing tank. The main aim of the experiment is to check whether the helical strakes with a pitch of 17.5 D and a height of 0.25 D, which is considered as the most effective vibration suppression device for the isolated cylinder undergoing vortex-shedding, still perform very well to reduce FIV of two inclined flexible cylinders in a side-by-side arrangement. The vibration of two identical inclined cylinders with a mass ratio of 1.90 and an aspect ratio of 350 was tested in the experiment. The center-to-center distance between the two cylinders was 3.0 D. The uniform flow was simulated by towing the cylinder models along the tank.The towing velocity varied from 0.05 to 1.0 m/s with an interval of 0.05 m/s. The maximum Reynolds number can be up to 1.6×104. Three cases were experimentally studied in this paper, including two side-by-side inclined smooth cylinders, only one smooth cylinder fitted with helical strakes in the two side-by-side inclined cylinders system and both two cylinders attached with helical strakes. The variations of displacement amplitude, dominant frequency, FIV suppression efficiency and dominant mode for the two side-by-side inclined cylinders with reduced velocity were shown and discussed.

Coupled Responses of Sewol,Twin Barges and Slings During Salvage

Korean Sewol is successfully lifted up with the strand jack system based on twin barges. During the salvage operation, two barges and Sewol encounter offshore environmental conditions of wave, current and wind. It is inevitable that the relative motions among the three bodies are coupled with the sling tensions, which may cause big dynamic loads for the lifting system. During the project engineering phase and the site operation, it is necessary to build up a simulation model that can precisely generate the coupled responses in order to define a suitable weather window and monitor risks for the salvage operation. A special method for calculating multibody coupled responses is introduced into Sewol salvage project. Each body’s hydrodynamic force and moment in multibody configuration is calculated in the way that one body is treated as freely moving in space, while other bodies are set as fixed globally.The hydrodynamic force and moment are then applied into a numerical simulation model with some calibration coefficients being inserted. These coefficients are calibrated with the model test results. The simulation model built up this way can predict coupled responses with the similar accuracy as the model test and full scale measurement,and particularly generate multibody shielding effects. Site measured responses and the responses only resulted from from the simulation keep project management simultaneously to judge risks of each salvage stage, which are important for success of Sewol salvage.

Numerical Simulation on Flow Past Two Side-by-Side Inclined Circular Cylinders at Low Reynolds Number

A series of three-dimensional numerical simulations is carried out to investigate the effect of inclined angle on flow behavior behind two side-by-side inclined cylinders at low Reynolds number Re=100 and small spacing ratio T/D=1.5 (T is the center-to-center distance between two side-by-side cylinders, D is the diameter of cylinder). The instantaneous and time-averaged flow fields, force coefficients and Strouhal numbers are analyzed. Special attention is focused on the axial flow characteristics with variation of the inclined angle. The results show that the inclined angle has a significant effect on the gap flow behaviors behind two inclined cylinders. The vortex shedding behind two cylinders is suppressed with the increase of the inclined angle as well as the flip-flop gap flow. Moreover, the mean drag coefficient, root-mean-square lift coefficient and Strouhal numbers decrease monotonously with the increase of the inclined angle, which follows the independent principle at small inclined angles.

Response of Two Unequal-Diameter Flexible Cylinders in A Side-by-Side Arrangement:Characteristics of FIV

Till now,little information is available on the flow-induced vibration(FIV)of multiple flexible cylinders with unequal diameters.Some FIV characteristics of unequal-diameter cylinders can be predicted based on the knowledge of equal-diameter cylinders,while there are still other features remaining unrevealed.In this paper,the FIV characteristics of two flexible cylinders with unequal diameters arranged side-by-side are experimentally investigated.The diameter ratio of the small cylinder(Small Cyl.)to the large cylinder(Large Cyl.)is nearly 0.5.The aspect ratios and mass ratios of the two flexible cylinders are 350/181 and 1.90/1.47,respectively.The centre-tocentre spacing ratio in the cross-flow(CF)direction is kept constant as 6.0 and the two cylinders can oscillate freely in both the CF and in-line(IL)directions.The towing velocity varies from 0.05 m/s to 1.00 m/s.The dominant modes and frequencies,CF and IL displacement amplitudes and response trajectories are discussed.Compared with the case of two identical cylinders in our previous study,the FIV responses demonstrate some similarities and differences.The similarities are as follows.Both cylinders exhibit multi-mode vibration features and they interact with each other.Meanwhile,the IL FIV shows a more complex behaviour than that in the CF direction.The difference is that as the diameter of one cylinder is increased,the effect on the smaller cylinder becomes more significant.For Large Cyl.,the FIV response is similar to its isolated counterpart,which indicates that Small Cyl.has a negligible effect on the FIV of the larger one.Whereas Large Cyl.perplexes the FIV of Small Cyl.during the vibration process.The spacing would change when both cylinders are oscillating.Proximity interference between the two cylinders and wake shielding effect of the Large Cyl.may occur.The dominant frequencies of Small Cyl.are reduced and the wake-induced flutter of Small Cyl.is observed from the response trajectories at different measuring points.

Measurements of Wind Loads on Side-by-Side Semi-Submersibles in A Wind Tunnel

The multi-body system has been a popular form for offshore operations in terms of high efficiency.The wind effects are crucial which directly affect the relative positions of floating bodies and operating security.In this study,the aerodynamic characteristics for two coupled semi-submersibles were analyzed in a wind tunnel to fill the gaps in literature related to the wind sheltering on offshore platforms.The influences of separation distance were also investigated.According to the results,substantial shielding effects were observed and wind forces on the shielded vessel decreased dramatically:a reduction in the transverse force could be up to 74%.Moreover,the longitudinal wind load was amplified by the platform abreast in a side-by-side configuration.As expected,the interference level became more pronounced with a decreasing separation distance.For cases in which wind interaction decayed rapidly with distance,logarithmic functions were preferable for describing the relationship between them.Whereas linear fitting was reasonable for the transverse wind force when there was still evident sheltering at a quite large distance.The length of shielding area was another important factor that there was approximately a linear relationship between it and the shielding level for two platforms in close proximity at various wind attack angles.Based on the two parameters,a preliminary wind loads estimation method considering shielding effects was proposed.This approach can aid the industry to have a qualitative assessment of wind sheltering especially at early stages.

Application of Helical Strakes for Suppressing the Flow-Induced Vibration of Two Side-by-Side Long Flexible Cylinders

Helical strakes have been widely applied for suppressing the vibration of flexible cylinders undergoing vortexshedding in offshore engineering.However,most research works have concerned on the application of helical strakes for the isolated flexible cylinder subjected to vortex-induced vibration(VIV).The effectiveness of helical strakes attached to side-by-side flexible cylinders in vibration reduction is still unclear.In this paper,the response characteristics of two side-by-side flexible cylinders with and without helical strakes were experimentally investigated in a towing tank.The configuration of the helical strakes used in the experiment had a pitch of 17.5D and a height of 0.25D(where D is the cylinder diameter),which is usually considered the most effective for VIV suppression of isolated marine risers and tendons.The center-to-center distance of the two cylinders was 3.0D.The uniform flow with a velocity ranging from 0.05 m/s to 1.0 m/s was generated by towing the cylinder models along the tank.Experimental results,including the displacement amplitude,the dominant frequency,the dominant mode,and the mean drag force coefficient,were summarized and discussed.For the case where only one cylinder in the two-cylinder system had helical strakes,the experimental results indicated that helical strakes can remarkably reduce the flow-induced vibration(FIV)of the staked cylinder.For the case of two straked cylinders in a side-by-side arrangement,it was found that the performance of helical strakes in suppressing the FIV is as good as that for the isolated cylinder.

An Experimental Study on Dynamics Features of Three Side-by-Side Flexible Risers Undergoing Vortex-Induced Vibrations in A Uniform Flow

A vortex-induced vibration(VIV)experiment on three side-by-side risers subjected to a uniform flow was carried out in a combined wave-current flume.The dynamic features of interference effect on three side-by-side risers were investigated by varying fluid velocity and inter-riser spacing.The distributions of dimensionless displacement,dominant frequency,and displacement trajectory of the model risers were measured using mode decomposition and wavelet transform techniques.The coupled interference of inter-riser fluid to adjacent risers at different spacings was disclosed by introducing the"interference ratio"concept.The results show that at spacings smaller than 6.0 D,the three model risers display appreciable deviations in their displacement responses in cross-flow or in-line direction,attributable to the strong proximity disturbance and wake interference between the risers.When the spacing is increased to 8.0 D,wake interference still makes great difference to the dynamic response of the risers in both directions.As reduced velocity increases,the three risers show higher agreement with an isolated riser in overall dominant vibration frequency in CF direction than that in IL direction at all spacings and the side risers,although symmetrically placed,do not vibrate symmetrically,as a result of the steady deflection of clearance flow within the riser group.Interference effect results in a remarkable unsteady mode competition within the risers;quantitation of the interference levels for the three risers at different spacings with interference ratio revealed that under low flow velocities and large spacing ratios,clearance flow constitutes a non-neglectable interferer for three side-by-side risers.

NUMERICAL COMPUTATION OF THE FLOW AROUND TWO SQUARE CYLINDERS ARRANGED SIDE-BY-SIDE

The numerical method is used to calculate the flow around two square cylinders arranged side-by-side and the mean and fluctuating aerodynamic forces, and Strouhal numbers and power spectrum of lift force and drag force are obtained. An improved MAC method proposed by Chen Suqin et al.,which uses three order upwind scheme to discretize the convection term and uses multigrid method to solve the Poisson equation for pressure is applied to simulate the flow around two square cylinders arranged side-by-side. Results show that the interference characteristic of two square cylinders arranged side-by-side is completely different with the different spacing ratio. When the spacing ratio is smaller than a certain critical value, the gap flow between two cylinders is biased to one side in a stable or unstable manner.

Safety and efficacy of transpapillary bridged bilateral side-by-side stenting for unresectable malignant hilar biliary obstruction

To the Editor:Biliary drainage is most frequently performed among endoscopic procedures using pancreatobiliary endoscopy.A large-diameter metallic stent can significantly extend the patency period rather than a plastic stent for extrahepatic biliary stricture.;However,the optimal drainage for the hilar biliary obstruction is still controversial.

Material Selection for Hawsers for a Side-by-side Offloading System

In order to provide a theoretical guide for choosing the material for the hawsers for the FPSO side-by-side offloading system, which is moored by the yoke system, the 3D potential flow theory and full coupled time-domain analysis are presented to study the dynamic response of the offloading system. The MingZhu FPSO offloading system in the field BZ25-1 is simulated here; and four different characteristic fiber ropes are used as the material for the hawsers. To acquire an accurate hawser line tension, the polynomial fitting method is used to calculate the nonlinear stiffness of the hawsers. By comparing the hawser lines＇ tension and the relative motion between the FPSO and the shuttle tanker, a suitable material for the hawser lines is chosen and discussed in this paper. The results indicate that the nonlinear stiffness characteristic of the fiber rope has a small effect on the relative motion of the vessels, but the hawser lines＇ tension is greatly influenced by the different characteristics of the fiber ropes. The hawser lines＇ tension with nonlinear stiffness is in accordance with the one with the upper and lower bound linear stiffness, which proves this method of fitting the fiber ropes＇ nonlinear stiffness is reasonable and reliable.

Fluid Resonance Between Twin Floating Barges with Roll Motion Under Wave Action

The wave-induced fluid resonance between twin side-by-side rectangular barges coupled with the roll motion of the twin barges is investigated by both numerical simulation and physical model test.A 2D numerical wave flume,based on an open source computational fluid dynamics(CFD)package OpenFOAM,is applied for the numerical simulation.After numerical validations and convergent verifications,the characteristics of the fluid resonance in the gap between the twin rolling side-by-side barges are examined.The resonant frequency of the oscillating fluid in the gap between the twin rolling barges decreases compared with that between the twin fixed barges.Generally,the twin barges roll in the opposite directions,and their equilibrium positions lean oppositely with respect to the initial vertical direction.A physical model test is carried out for a further investigation,in which the twin barges are set oppositely leaning and fixed.From the present experimental results,a linear decrease of the resonant frequency with the increasing leaning angle is found.Combined with the numerical results,the deflection of the equilibrium positions of the twin barges is a relevant factor for the resonant frequency.Besides,the effects of the gap width and incident wave height on the fluid resonance coupled with roll motion are examined.

平台内TMD对新型Barge浮式风机振动抑制的研究

Barge型浮式风机是发展海上风电的重要装备,其运动响应可以通过被动控制装置调谐质量阻尼器(tuned mass damper,TMD)有效抑制。基于ITI Energy Barge风机,本研究设计了新型Barge浮式风机基础,建立平台配置TMD的风机动力学模型,在浮动平台内配置不同位置、质量、阻尼参数TMD,研究风浪载荷作用下风机平台配置最优参数TMD前后浮式风机运动响应的变化。结果表明:在新型风机平台内浮筒顶部配置质量比3%、阻尼比6%的TMD后,风机塔顶前后和左右位移分别减小15.56%、44.93%,平台纵摇和横摇抑制率达到22.97%、62.79%,风机塔基前后和左右弯矩分别减少15.62%、39.8%。此时,TMD控制效果最佳,风机整体稳定性大幅提高。

天鲲号绞吸挖泥船挖岩作业配套船舶技术研究

随着全球经济增长和疏浚业的扩大,大型绞吸挖泥船已成为这一领域的关键装备。文章专注于提升超大型绞吸挖泥船“天鲲号”的效能。通过分析该船在挖岩工程中的挑战,引入了“挖-运分离”的高效物流策略。为实现这一目标,建议开发一艘专门与天鲲号配套使用的开体式耙吸挖泥船。文章详细讨论了开体式耙吸挖泥船在主尺度和舱容、快速靠泊、泥舱结构和强度、疏浚系统和船舶布局等方面与天鲲号的匹配问题。提出了一个新颖的开体式耙吸挖泥船方案,能够完全满足配合天鲲号挖岩装驳和运输的需求,实现“挖-运分离”物流策略;能够开展后期扫浅挖泥作业,减少天鲲号的占用期,从而显著提升整体经济效益。

A Review on Vibration Control of Multiple Cylinders Subjected to FlowInduced Vibrations

The fatigue damage caused by flow-induced vibration(FIV)is one of the major concerns for multiple cylindrical structures in many engineering applications.The FIV suppression is of great importance for the security of many cylindrical structures.Many active and passive control methods have been employed for the vibration suppression of an isolated cylinder undergoing vortex-induced vibrations(VIV).The FIV suppression methods are mainly extended to the multiple cylinders from the vibration control of the isolated cylinder.Due to the mutual interference between the multiple cylinders,the FIV mechanism is more complex than the VIV mechanism,which makes a great challenge for the FIV suppression.Some efforts have been devoted to vibration suppression of multiple cylinder systems undergoing FIV over the past two decades.The control methods,such as helical strakes,splitter plates,control rods and flexible sheets,are not always effective,depending on many influence factors,such as the spacing ratio,the arrangement geometrical shape,the flow velocity and the parameters of the vibration control devices.The FIV response,hydrodynamic features and wake patterns of the multiple cylinders equipped with vibration control devices are reviewed and summarized.The FIV suppression efficiency of the vibration control methods are analyzed and compared considering different influence factors.Further research on the FIV suppression of multiple cylinders is suggested to provide insight for the development of FIV control methods and promote engineering applications of FIV control methods.

填海造陆工程中建筑废料的绿色环保应用技术

结合某工程技术要求和限制因素,开展了建筑废料填海技术研究。通过对建筑废料的物料特性分析,提出三级台阶和低摩擦阻力型的棒条型筛分给料机和卡扣式可快速更换筛网、可调振幅振动筛组成的两级筛分工艺设施,解决了建筑废料筛分难题;研制了自带随船挖掘机的自航平板驳船,实现了建筑废料海运、卸载和转驳;研制了新型浅吃水、低净空、可升降防污帘的环保型开体驳船,实现了限高限深条件下的水上环保回填。