Side-chain alkylation of toluene with methanol is a green pathway to realize the one-step production of styrene under mild conditions,but the low selectivity of styrene is difficult to be improved with by-products of ...Side-chain alkylation of toluene with methanol is a green pathway to realize the one-step production of styrene under mild conditions,but the low selectivity of styrene is difficult to be improved with by-products of ethylbenzene and xylene.In this study,a new way is introduced to improve the catalytic performance by means of assisting basic compounds as co-catalysts during the toluene side-chain alkylation with methanol to styrene.As a result,high activity of side-chain alkylation appears over the basic Cs-modified zeolite catalysts prepared by ion exchange and impregnation methods.This high performance should be mainly attributed to two co-catalysis actions:(1)the promotion of basic compounds for methanol dehydrogenation to formaldehyde as the intermediate for side-chain alkylation;(2)the suppression of the styrene transfer hydrogenation on basic Cs-modified zeolites to avoid the formation of ethylbenzene.Especially for Cs_(2)O/CsX-ex catalyst,the addition of 2%mol/mol 2-picoline in reaction mixture could achieve both 12.3%toluene conversion and 84.1%styrene selectivity.Whereas the higher concentration of 2-picoline(>6%mol/mol)caused an inhibition to the catalytic activity because the excessive basic compound poisoned the combined acid-base pathway required for the side-chain alkylation process.In addition,two possible side-chain alkylation reaction routes on Cs-modified zeolite under the different 2-picoline absorption were described.展开更多
A series of ZSM-5 zeolites, with the morphologies of sphere, sphere with cubic particles on the surface, and cubic particles, were synthesized by hydrothermal method using n-butylamine as the template, assisted by the...A series of ZSM-5 zeolites, with the morphologies of sphere, sphere with cubic particles on the surface, and cubic particles, were synthesized by hydrothermal method using n-butylamine as the template, assisted by the addition of NaC1 and crystal seed. X-ray diffraction (XRD), scanning electron microscope (SEM), X-ray fluorescence (XRF) and temperature-programmed desorption of ammonia (NH3-TPD) were used to characterize these samples. The samples were tested with toluene methylation reaction. The modified sample composed of spherical particles with 3 μm crystal particles on the surface had a para-xylene selectivity of 95% and maintained 79% of the initial conversion after running the reaction for 50 h. This modified samole showed the best stability amonz the tested three modified samoles.展开更多
The alkylation of toluene with methanol to selective formation of p-xylene has been systematically studied. ZSM-12 (MTW)/ZSM-5 co-crystalline zeolite in 40:60 proportions have been synthesized by the same molar gel...The alkylation of toluene with methanol to selective formation of p-xylene has been systematically studied. ZSM-12 (MTW)/ZSM-5 co-crystalline zeolite in 40:60 proportions have been synthesized by the same molar gel composition, but at different temperatures and periods than that of ZSM-12 and ZSM-5, separately. All the prepared samples are characterized by XRD, SEM, BET, and XRF. The activity of toluene alkylation was investigated with a mixture of toluene and methanol as a feed over the ZSM-12, ZSM-12/ZSM-5 co-crystalline, ZSM-5, and physical mixture of ZSM-12/ZSM-5. From characterization, it is observed that the ZSM-12/ZSM-5 co-crystalline material is different from that of ZSM-12, ZSM-5, and their physical mixture. Further, the ZSM-12/ZSM-5 co-crystalline zeolite produces the highest content of xylene and has better selectivity for p-xylene than ZSM-12, ZSM-5, and their physical mixture.展开更多
With the shape selective zeolite catalyst,toluene alkylation with methanol to para-xylene(MTPX)technology could produce highly pure para-xylene(PX)in one step.The lower feedstock cost and less energy consumption in pr...With the shape selective zeolite catalyst,toluene alkylation with methanol to para-xylene(MTPX)technology could produce highly pure para-xylene(PX)in one step.The lower feedstock cost and less energy consumption in products separation make it more competitive compared to the current toluene disproportionation route.Thus,MTPX is regarded as the most reasonable production route for PX production.This article reviews the strategies that applied to the preparation of high-performance catalysts for MTPX,with special focus on the precise control of pore dimension and acid sites distribution in zeolite to achieve the highest selectivity to PX.The outlook of the MTPX catalyst is also proposed to guide the catalyst development in the field.展开更多
A series of calcined HTLcs catalysts were prepared and modified with potassium phosphate by impregnation method to clarify the influence of catalyst alkalinity on the side chain alkylation of toluene with methanol for...A series of calcined HTLcs catalysts were prepared and modified with potassium phosphate by impregnation method to clarify the influence of catalyst alkalinity on the side chain alkylation of toluene with methanol for synthesis of ethylbenzene and styrene.The catalysts were characterized by X-ray diffraction(XRD),N_(2)physical adsorption-desorption,Fourier-transform infrared spectroscopy(FT-IR),Scanning electron microscopy(SEM),X-ray photoelectron spectrometry(XPS),NH_(3)temperature-programmed desorption(NH_(3)-TPD)and CO_(2)temperature-programmed desorption(CO_(2)-TPD).It was found that the selectivity of styrene was highest(39.25%)when the K_(3)PO_(4)loading was 7.5 wt%.And the total yield of styrene and ethylbenzene could reach 65.08%with 10 wt%K_(3)PO_(4)loading.This might due to the fact that the addition of K_(3)PO_(4)could adjust the acid and basic sites of catalysts.In addition,appropriate strength and amount of basic sites were favorable to producing more styrene.展开更多
Alkylation of toluene with 2-chloro-2-methylpropane (t-Bu-Cl) to synthesize para-tert-butyltoluene (PTBT) was carried out in the presence of triethylamine hydrochloride-aluminum chloride ionic liquids used as the cata...Alkylation of toluene with 2-chloro-2-methylpropane (t-Bu-Cl) to synthesize para-tert-butyltoluene (PTBT) was carried out in the presence of triethylamine hydrochloride-aluminum chloride ionic liquids used as the catalyst. The ionic liquids were prepared with different molar ratios of Et3NHCl to AlCl3 , and the effect of the molar ratio between AlCl 3 and Et3NHCl, the reaction time, the reaction temperature, the ionic liquid dosage, as well as the molar ratio of toluene to chloro-2-methylpropane on the alkylation reaction of toluene with chloro-2-methyl-propane was investigated. The test results showed that the acidic ionic liquids prepared with Et3NHCl and AlCl3 had good activity and selectivity for the alkylation reaction of toluene with alkyl chloride to produce PTBT. The optimal reaction conditions were specified at anAlCl3 to Et3NHCl ratio of 1.6, a reaction temperature of 20℃, a mass fraction of toluene to ionic liquid of 10%, and a chloro-2-methylpropane to toluene molar ratio of 0.5. Under the suitable reaction conditions, a 98% conversion of chloro-2-methylpropane and an 82.5% selectivity of PTBT were obtained. Ionic liquids could be reused 5 times with its catalytic activity unchanged, and the regenerated ionic liquids can be recycled.展开更多
采用水热合成法制备了I M-5和TNU-9分子筛,并采用水蒸气处理法对其进行了改性。采用XRD、BET、TEM、吡啶-IR、29Si、27Al MAS NMR等手段对分子筛的物化性能进行了表征,并考察了分子筛在甲苯甲醇烷基化反应中的催化性能。结果表明,与ZSM-...采用水热合成法制备了I M-5和TNU-9分子筛,并采用水蒸气处理法对其进行了改性。采用XRD、BET、TEM、吡啶-IR、29Si、27Al MAS NMR等手段对分子筛的物化性能进行了表征,并考察了分子筛在甲苯甲醇烷基化反应中的催化性能。结果表明,与ZSM-5分子筛相比,I M-5和TNU-9分子筛在甲苯甲醇烷基化反应中具有较高的催化活性,二甲苯选择性高。经水蒸气处理后,ST-H-I M-5和ST-H-TNU-9分子筛的活性有所下降,ST-H-I M-5分子筛的二甲苯选择性高,ST-H-TNU-9分子筛的对二甲苯选择性达到40%左右。展开更多
基金Supported by the National Natural Science Foundation of China(#91534115).
文摘Side-chain alkylation of toluene with methanol is a green pathway to realize the one-step production of styrene under mild conditions,but the low selectivity of styrene is difficult to be improved with by-products of ethylbenzene and xylene.In this study,a new way is introduced to improve the catalytic performance by means of assisting basic compounds as co-catalysts during the toluene side-chain alkylation with methanol to styrene.As a result,high activity of side-chain alkylation appears over the basic Cs-modified zeolite catalysts prepared by ion exchange and impregnation methods.This high performance should be mainly attributed to two co-catalysis actions:(1)the promotion of basic compounds for methanol dehydrogenation to formaldehyde as the intermediate for side-chain alkylation;(2)the suppression of the styrene transfer hydrogenation on basic Cs-modified zeolites to avoid the formation of ethylbenzene.Especially for Cs_(2)O/CsX-ex catalyst,the addition of 2%mol/mol 2-picoline in reaction mixture could achieve both 12.3%toluene conversion and 84.1%styrene selectivity.Whereas the higher concentration of 2-picoline(>6%mol/mol)caused an inhibition to the catalytic activity because the excessive basic compound poisoned the combined acid-base pathway required for the side-chain alkylation process.In addition,two possible side-chain alkylation reaction routes on Cs-modified zeolite under the different 2-picoline absorption were described.
文摘A series of ZSM-5 zeolites, with the morphologies of sphere, sphere with cubic particles on the surface, and cubic particles, were synthesized by hydrothermal method using n-butylamine as the template, assisted by the addition of NaC1 and crystal seed. X-ray diffraction (XRD), scanning electron microscope (SEM), X-ray fluorescence (XRF) and temperature-programmed desorption of ammonia (NH3-TPD) were used to characterize these samples. The samples were tested with toluene methylation reaction. The modified sample composed of spherical particles with 3 μm crystal particles on the surface had a para-xylene selectivity of 95% and maintained 79% of the initial conversion after running the reaction for 50 h. This modified samole showed the best stability amonz the tested three modified samoles.
文摘The alkylation of toluene with methanol to selective formation of p-xylene has been systematically studied. ZSM-12 (MTW)/ZSM-5 co-crystalline zeolite in 40:60 proportions have been synthesized by the same molar gel composition, but at different temperatures and periods than that of ZSM-12 and ZSM-5, separately. All the prepared samples are characterized by XRD, SEM, BET, and XRF. The activity of toluene alkylation was investigated with a mixture of toluene and methanol as a feed over the ZSM-12, ZSM-12/ZSM-5 co-crystalline, ZSM-5, and physical mixture of ZSM-12/ZSM-5. From characterization, it is observed that the ZSM-12/ZSM-5 co-crystalline material is different from that of ZSM-12, ZSM-5, and their physical mixture. Further, the ZSM-12/ZSM-5 co-crystalline zeolite produces the highest content of xylene and has better selectivity for p-xylene than ZSM-12, ZSM-5, and their physical mixture.
基金the funding support(Project No.:CF9300172922)from National Institute of Clean-and-low-carbon Energy.
文摘With the shape selective zeolite catalyst,toluene alkylation with methanol to para-xylene(MTPX)technology could produce highly pure para-xylene(PX)in one step.The lower feedstock cost and less energy consumption in products separation make it more competitive compared to the current toluene disproportionation route.Thus,MTPX is regarded as the most reasonable production route for PX production.This article reviews the strategies that applied to the preparation of high-performance catalysts for MTPX,with special focus on the precise control of pore dimension and acid sites distribution in zeolite to achieve the highest selectivity to PX.The outlook of the MTPX catalyst is also proposed to guide the catalyst development in the field.
基金financial support from the National Key Technology Research&Development Program(Grant No.2013BAC14B04)the National Natural Science Foundation of China(Grant No.21336006)+1 种基金the Shanxi Province Key Research&Development Program(international cooperation,Grant No.201803D421099)Supported by Shanxi Scholarship Council of China(Grant No.2017-035)。
文摘A series of calcined HTLcs catalysts were prepared and modified with potassium phosphate by impregnation method to clarify the influence of catalyst alkalinity on the side chain alkylation of toluene with methanol for synthesis of ethylbenzene and styrene.The catalysts were characterized by X-ray diffraction(XRD),N_(2)physical adsorption-desorption,Fourier-transform infrared spectroscopy(FT-IR),Scanning electron microscopy(SEM),X-ray photoelectron spectrometry(XPS),NH_(3)temperature-programmed desorption(NH_(3)-TPD)and CO_(2)temperature-programmed desorption(CO_(2)-TPD).It was found that the selectivity of styrene was highest(39.25%)when the K_(3)PO_(4)loading was 7.5 wt%.And the total yield of styrene and ethylbenzene could reach 65.08%with 10 wt%K_(3)PO_(4)loading.This might due to the fact that the addition of K_(3)PO_(4)could adjust the acid and basic sites of catalysts.In addition,appropriate strength and amount of basic sites were favorable to producing more styrene.
基金the financial support from the Beijing University of Chemical Technologythe Key Laboratory of Advanced Chemical Engineering and Technology, Beijing Institute of Petrochemical Technology, for the analysis of samples
文摘Alkylation of toluene with 2-chloro-2-methylpropane (t-Bu-Cl) to synthesize para-tert-butyltoluene (PTBT) was carried out in the presence of triethylamine hydrochloride-aluminum chloride ionic liquids used as the catalyst. The ionic liquids were prepared with different molar ratios of Et3NHCl to AlCl3 , and the effect of the molar ratio between AlCl 3 and Et3NHCl, the reaction time, the reaction temperature, the ionic liquid dosage, as well as the molar ratio of toluene to chloro-2-methylpropane on the alkylation reaction of toluene with chloro-2-methyl-propane was investigated. The test results showed that the acidic ionic liquids prepared with Et3NHCl and AlCl3 had good activity and selectivity for the alkylation reaction of toluene with alkyl chloride to produce PTBT. The optimal reaction conditions were specified at anAlCl3 to Et3NHCl ratio of 1.6, a reaction temperature of 20℃, a mass fraction of toluene to ionic liquid of 10%, and a chloro-2-methylpropane to toluene molar ratio of 0.5. Under the suitable reaction conditions, a 98% conversion of chloro-2-methylpropane and an 82.5% selectivity of PTBT were obtained. Ionic liquids could be reused 5 times with its catalytic activity unchanged, and the regenerated ionic liquids can be recycled.