In the present research, the orthogonal experiment was carried out to investigate the influence of different austempering process parameters （i.e. austenitizing temperature and time, and austempering temperature and ...In the present research, the orthogonal experiment was carried out to investigate the influence of different austempering process parameters （i.e. austenitizing temperature and time, and austempering temperature and time） on microstructure and mechanical properties of LZQT500-7 ductile iron dense bars with 172 mm in diameter which were produced by horizontal continuous casting （HCC）. The results show that the major factors influencing the hardness of austempered ductile iron （ADI） are austenitizing temperature and austempering temperature. The fraction of retained austenite increases as the austenitizing and austempering temperatures increase. When austenitizing temperature is low, acicular ferrite and retained austenite can be efifciently obtained by appropriately extending the austenitizing time. The proper austmepering time could ensure enough stability of retained austenite and prevent high carbon austenite decomposition. The optimal mechanical properties of ADI can be achieved with the fol owing process parameters： austenitizing temperature and time are 866 ＆#176;C and 135 min, and austempering temperature and time are 279 ＆#176;C and 135 min, respectively. The microstructure of ADI under the optimal austempering process consists of ifne acicular ferrite and a smal amount of retained austenite, and the hardness, tensile strength, yield strength, elongation and impact toughness of the bars are HBW 476, 1670 MPa, 1428 MPa, 2.93%and 25.7 J, respectively.展开更多
1 Scope This standard specifies the definition, prineiple, apparatus and materials, procedure, expression of resuits and test report of determination of bulk density, apparent porosity and true porosity of dense shap...1 Scope This standard specifies the definition, prineiple, apparatus and materials, procedure, expression of resuits and test report of determination of bulk density, apparent porosity and true porosity of dense shaped refractory products.展开更多
In this article, we introduce a robust sparse test statistic which is based on the maximum type statistic. Both the limiting null distribution of the test statistic and the power of the test are analysed. It is shown ...In this article, we introduce a robust sparse test statistic which is based on the maximum type statistic. Both the limiting null distribution of the test statistic and the power of the test are analysed. It is shown that the test is particularly powerful against sparse alternatives. Numerical studies are carried out to examine the numerical performance of the test and to compare it with other tests available in the literature. The numerical results show that the test proposed significantly outperforms those tests in a range of settings, especially for sparse alternatives.展开更多
基金financially supported by the fund of the Key Projects of Shaanxi Provincial International Technology Cooperation Plan(2013KW16)the Scientific Research Program funded by Shaanxi Provincial Education Department(2013JK0914)+2 种基金the State Key Laboratory of Solidifi cation Processing in NWPU(SKLSP201115)the Scientific Research Project of Xi'an University of Technology(2013CX004)the fund of the Key Laboratory of Electrical Materials and Infi ltration Technology of Shaanxi Province,China(2014)
文摘In the present research, the orthogonal experiment was carried out to investigate the influence of different austempering process parameters （i.e. austenitizing temperature and time, and austempering temperature and time） on microstructure and mechanical properties of LZQT500-7 ductile iron dense bars with 172 mm in diameter which were produced by horizontal continuous casting （HCC）. The results show that the major factors influencing the hardness of austempered ductile iron （ADI） are austenitizing temperature and austempering temperature. The fraction of retained austenite increases as the austenitizing and austempering temperatures increase. When austenitizing temperature is low, acicular ferrite and retained austenite can be efifciently obtained by appropriately extending the austenitizing time. The proper austmepering time could ensure enough stability of retained austenite and prevent high carbon austenite decomposition. The optimal mechanical properties of ADI can be achieved with the fol owing process parameters： austenitizing temperature and time are 866 ＆#176;C and 135 min, and austempering temperature and time are 279 ＆#176;C and 135 min, respectively. The microstructure of ADI under the optimal austempering process consists of ifne acicular ferrite and a smal amount of retained austenite, and the hardness, tensile strength, yield strength, elongation and impact toughness of the bars are HBW 476, 1670 MPa, 1428 MPa, 2.93%and 25.7 J, respectively.
文摘1 Scope This standard specifies the definition, prineiple, apparatus and materials, procedure, expression of resuits and test report of determination of bulk density, apparent porosity and true porosity of dense shaped refractory products.
基金supported by the National Natural Science Foundation of China(Grant No.11571052)Social Science Research Foundation of Hu’nan Provincial Department(Grant No.15YBA066)Outstanding Youth Foundation of Hu’nan Provincial Department of Education(Grant No.17B047)
文摘In this article, we introduce a robust sparse test statistic which is based on the maximum type statistic. Both the limiting null distribution of the test statistic and the power of the test are analysed. It is shown that the test is particularly powerful against sparse alternatives. Numerical studies are carried out to examine the numerical performance of the test and to compare it with other tests available in the literature. The numerical results show that the test proposed significantly outperforms those tests in a range of settings, especially for sparse alternatives.
