基于In Silicon模拟消化的北极虾DPP-Ⅳ抑制肽活性分析

北极虾具有很高的营养价值,在食品领域已引起越来越多的关注。对北极虾蛋白进行In Silicon模拟消化获得寡肽,通过PeptideRanker活性评分及理化性质分析,从中筛选出具有潜在生物活性的寡肽。使用ToxinPred分析和BIOPEP-UWM生物活性预测,发现部分寡肽具有二肽基肽酶-Ⅳ(dipeptidyl peptidase-Ⅳ,DPP-Ⅳ)抑制活性,最终确定WFP(一种三肽,Trp-Phe-Pro)具有最优的DPP-Ⅳ抑制活性肽。分子对接表明,WFP和DPP-Ⅳ能够形成稳定的复合物,其结合能为-6.93 kcal/mol,进一步研究表明,WFP通过与DPP-Ⅳ S1、S2、S3三个活性口袋中的9个氨基酸残基发生相互作用而抑制其活性。本研究为阐释北极虾营养价值及生物活性肽的开发提供了理论依据。

Silicone oil as a corneal lubricant to reduce corneal edema and improve visualization during

AIM:To evaluate the efficacy and safety of silicone oil(SO)as a corneal lubricant to improve visualization during vitrectomy.METHODS:Patients who underwent vitreoretinal surgery were divided into two groups.Group 1 was operated on with initial SO(Oxane 5700)as a corneal lubricant.Group 2 was operated on with initial lactated ringer’s solution(LRS)and then replaced with SO as required.Fundus clarity was scored during the surgery.Fluorescein staining was performed to determine the damage to corneal epithelium.RESULTS:Totally 114 eyes of 114 patients were included.Single SO use maintained a clear cornea and provided excellent visualization of surgical image.In group 1,the fundus clarity was grade 3 in 41/45 eyes and grade 2 in 4/45 eyes.In group 2,corneal edema frequently occurred after initial LRS use.The fundus clarity was grade 3 in 19/69 eyes,2 in 37/69 eyes and 1 in 13/69 eyes(P<0.05).SO was applied in 29 eyes of initial LRS use with subsequent corneal edema,which eliminated the corneal edema in 26 eyes.Corneal fluorescein staining score in group 1 was 0 in 28 eyes,1 in 11 eyes and 2 in 6 eyes,and 40,20 and 9,respectively,in group 2(all P>0.05).CONCLUSION:The use of SO as a corneal lubricant is effective and safe for preserving and improving corneal clarity and providing clear surgical field during vitrectomy.

Effect of multiple coulomb scattering on the beam tests of silicon pixel detectors

In the research and development of new silicon pixel detectors,a collimated monoenergetic charged-particle test beam equipped with a high-resolution pixel-beam telescope is crucial for prototype verification and performance evaluation.When the beam energy is low,the effect of multiple Coulomb scattering on the measured resolution of the Device Under Test(DUT)must be considered to accurately evaluate the performance of the pixel chips and detectors.This study aimed to investigate the effect of multiple Coulomb scattering on the measured resolution,particularly at low beam energies.Simulations were conducted using Allpix^(2) to study the effects of multiple Coulomb scattering under different beam energies,material budgets,and telescope layouts.The simulations also provided the minimum energy at which the effect of multiple Coulomb scattering could be ignored.Compared with the results of a five-layer detector system tested with an electron beam at DESY,the simulation results were consistent with the beam test results,confirming the reliability of the simulations.

Non-contact wide-field viewing system-assisted scleral buckling surgery for retinal detachment in silicone oilfilled eyes

AIM:To evaluate scleral buckling(SB)surgery using a noncontact wide-field viewing system and 23-gauge intraocular illumination for the treatment of rhegmatogenous retinal detachment in silicone oil(SO)-filled eyes.METHODS:Totally 9 patients(9 eyes)with retinal detachment in SO-filled eyes were retrospectively analyzed.All patients underwent non-contact wide-field viewing system-assisted buckling surgery with 23-gauge intraocular illumination.SO was removed at an appropriate time based on recovery.The patients were followed up for at least 3mo after SO removal.Retinal reattachment,complications,visual acuity and intraocular pressure(IOP)before and after surgery were observed.RESULTS:Patients were followed up for a mean of 8.22mo(3-22mo)after SO removal.All patients had retinal reattachment.At the final follow-up,visual acuity showed improvement for 8 patients,and no change for 1 patient.The IOP was high in 3 patients before surgery,but it stabilized after treatment;it was not affected in the other patients.None of the patients had infections,hemorrhage,anterior ischemia,or any other complication.CONCLUSION:This new non-contact wide-field viewing system-assisted SB surgery with 23-gauge intraocular illumination is effective and safe for retinal detachment in SO-filled eyes.

Regulation of 2-acetyl-1-pyrroline and grain quality in early-season indica fragrant rice by nitrogen and silicon fertilization under different plantation methods

Fragrant rice has a high market value,and it is a popular rice type among consumers owing to its pleasant flavor.Plantation methods,nitrogen(N)fertilizers,and silicon(Si)fertilizers can affect the grain yield and fragrance of fragrant rice.However,the core commercial rice production attributes,namely the head rice yield(HRY)and 2-acetyl-1-pyrroline(2-AP)content of fragrant rice,under various nitrogen and silicon(N-Si)fertilization levels and different plantation methods remain unknown.The field experiment in this study was performed in the early seasons of 2018 and 2019 with two popular indica fragrant rice cultivars(Yuxiangyouzhan and Xiangyaxiangzhan).They were grown under six N-Si fertilization treatments(combinations of two levels of Si fertilizer,0 kg Si ha^(−1)(Si0)and 150 kg Si ha^(−1)(Si1),and three levels of N fertilizer,0 kg N ha^(−1)(N0),150 kg N ha^(−1)(N1),and 220 kg N ha^(−1)(N2))and three plantation methods(artificial transplanting(AT),mechanical transplanting(MT),and mechanical direct-seeding(MD)).The results showed that the N-Si fertilization treatments and all the plantation methods significantly affected the HRY and 2-AP content and related parameters of the two different fragrant rice cultivars.Compared with the Si0N0 treatment,the N-Si fertilization treatments resulted in higher HRY and 2-AP contents.The rates of brown rice,milled rice,head rice,and chalky rice of the fragrant rice also improved with the N-Si fertilization treatments.The N-Si fertilization treatments increased the activities of N metabolism enzymes and the accumulation of N and Si in various parts of the fragrant rice,and affected their antioxidant response parameters.The key parameters for the HRY and 2-AP content were assessed by redundancy analysis.Furthermore,the structural equation model revealed that the Si and N accumulation levels indirectly affected the HRY by affecting the N metabolism enzyme activity,N use efficiency,and grain quality of fragrant rice.Moreover,high N and Si accumulation directly promoted the 2-AP content or affected the antioxidant response parameters and indirectly regulated 2-AP synthesis.The interactions of the MT method with the N-Si fertilization treatments varied in the fragrant rice cultivars in terms of the HRY and 2-AP content,whereas the MD method was beneficial to the 2-AP content in both fragrant rice cultivars under the N-Si fertilization treatments.

Macroporous Directed and Interconnected Carbon Architectures Endow Amorphous Silicon Nanodots as Low‑Strain and Fast‑Charging Anode for Lithium‑Ion Batteries

Fabricating low-strain and fast-charging silicon-carbon composite anodes is highly desired but remains a huge challenge for lithium-ion batteries.Herein,we report a unique silicon-carbon composite fabricated by uniformly dis-persing amorphous Si nanodots(SiNDs)in carbon nanospheres(SiNDs/C)that are welded on the wall of the macroporous carbon framework(MPCF)by vertical graphene(VG),labeled as MPCF@VG@SiNDs/C.The high dispersity and amor-phous features of ultrasmall SiNDs(~0.7 nm),the flexible and directed electron/Li+transport channels of VG,and the MPCF impart the MPCF@VG@SiNDs/C more lithium storage sites,rapid Li+transport path,and unique low-strain property during Li+storage.Consequently,the MPCF@VG@SiNDs/C exhibits high cycle stability(1301.4 mAh g^(-1) at 1 A g^(-1) after 1000 cycles without apparent decay)and high rate capacity(910.3 mAh g^(-1),20 A g^(-1))in half cells based on industrial electrode standards.The assembled pouch full cell delivers a high energy density(1694.0 Wh L^(-1);602.8 Wh kg^(-1))and an excellent fast-charging capability(498.5 Wh kg^(-1),charging for 16.8 min at 3 C).This study opens new possibilities for preparing advanced silicon-carbon com-posite anodes for practical applications.

Silicon Mitigates Aluminum Toxicity of Tartary Buckwheat by Regulating Antioxidant Systems

Aluminum (Al) toxicity is a considerable factor limiting crop yield and biomass in acidic soil. Tartary buckwheatgrowing in acidic soil may suffer from Al poisoning. Here, we investigated the influence of Al stress on the growthof tartary buckwheat seedling roots, and the alleviation of Al stress by silicon (Si), as has been demonstrated inmany crops. Under Al stress, root growth (total root length, primary root length, root tips, root surface area, androot volume) was significantly inhibited, and Al and malondialdehyde (MDA) accumulated in the root tips. At thesame time, catalase (CAT) and ascorbate peroxidase activities, polyphenols, flavonoids, and 1,1-diphenyl-2-picrylhydrazyl(DPPH) and 2,2′-azinobis-(3-ethylbenzthiazoline-6-sulphonate) (ABTS) free-radical scavenging abilitywere significantly decreased. After the application of Si, root growth, Al accumulation, and oxidative damage wereimproved. Compared to Al-treated seedlings, the contents of ·O2− and MDA decreased by 29.39% and 25.22%,respectively. This was associated with Si-induced increases in peroxidase and CAT enzyme activity, flavonoidcompounds, and free-radical scavenging (DPPH and ABTS). The application of Si therefore has positive effectson Al toxicity in tartary buckwheat roots by reducing Al accumulation in the roots and maintaining oxidationhomeostasis.

Analysis on Demonstration Application of Silicon Fertilizer in Field Cultivation of Rice

[Objectives]This study was conducted to investigate the scientific application of silicon fertilizer in rice cultivation,one of the staple crops.[Methods]In 2022,Yandu District carried out a special experiment and field demonstration study on the effects of foliar application of Zhengda water-soluble silicon fertilizer on rice production.[Results]The preliminary results showed that①Zhengda water-soluble silicon fertilizer could effectively improve the growth and development of rice and improve the population quality.The peak number of tillers,productive tiller percentage,number of effective panicles and number of effective grains per panicle increased by 6.7%,5.8%,5.5%,and 1.2%,respectively.②The yield and processing quality were improved.After applying silicon fertilizer,the yield per unit area increased by about 6.8%,and the unpolished rice yield,milled rice yield and head rice yield increased by 0.7%,1.94%and 2.15%respectively.[Conclusions]The demonstration application of silicon fertilizer in field cultivation of rice in Yandu District further proves previous research conclusions and has important practical significance.

Endophthalmitis in silicone oil-filled eye: A case report

BACKGROUND Endophthalmitis occurring in silicone oil-filled eyes is a very rare occurrence,with reported incidence rates ranging between 0.07%and 0.039%.Traditional methods of management of infectious endophthalmitis include the removal of silicone oil,washout of the vitreous cavity,administration of intravitreal antibiotics,and reinjection of silicone oil.CASE SUMMARY Herein,we report the case of a 39-year-old man with unilateral endophthalmitis after pars plana vitrectomy and silicone oil tamponade.Intravitreal injections of full-dose antibiotics and anterior chamber washout were used to treat the patient.No signs of retinal toxicity were observed during the follow-up period.CONCLUSION Intravitreal full-dose antibiotic injections and anterior chamber washout are promising alternatives to traditional therapies for endophthalmitis in silicone oilfilled eyes.

Preparation and Analysis of Carbon Fiber-Silicon Carbide Thermally Conductive Asphalt Concrete

An experimental investigation into the thermal conductivity of CF-SiC two-phase composite asphalt concrete is presented.The main objective of this study was to verify the possibility of using SiC powder instead of mineral powder as the thermal conductive filler to prepare a new type of asphalt concrete and improve the efficiency of electrothermal snow and ice melting systems accordingly.The thermal conductivity of asphalt concrete prepared with different thermally conductive fillers was tested by a transient plane source method,and the related performances were measured.Then the temperature rise rate and surface temperature were studied through field heating tests.Finally,the actual ice melting efficiency of the thermally conductive asphalt concrete was evaluated using an effective electrothermal system.As shown by the experimental results,the composite made of SiC powder and carbon fiber has a high thermal conductivity.When SiC replaces mineral powder,the thermal conductivity of the asphalt mixture increases first and then decreases with the increase of carbon fiber content.In the present study,in particular,the thermal conductivity attained a peak when the carbon fiber content was 0.2%of the aggregate mass.

Modeling and Simulation of Heterojunction Solar Cell with Mono Crystalline Silicon

The monocrystalline silicon is a promising material that could be used in solar cells that convert light into electricity. Although the cost of ordinary silicon (Si) solar cells has decreased significantly over the past two decades, the conversion efficiency of these cells has remained relatively high. While solar cells have a great potential as a device of renewable energy, the high cost they incur per Watt continues to be a significant barrier to their widespread implementation. As a consequence, it is vital to conduct research into alternate materials that may be used in the construction of solar cells. The heterojunction solar cell (HJSC), which is based on n-type zinc oxide (n-ZnO) and p-type silicon (p-Si), is one of the numerous alternatives of the typical Si single homojunction solar cell. There are many deficiencies that can be found in the published research on n-ZnO/p-Si heterojunction solar cell. Inconsistencies in the stated value of open circuit voltage (Voc) of the solar cell are one example of deficiency. The absence of a full theoretical study to evaluate the potential of the solar cell structure is another deficiency that can be found in these researches. A lower value of experimentally obtained VOC in comparison to the theoretical prediction based on the band-gap between n-ZnO and p-Si. There needs to be more consensus among scientists regarding the optimal conditions for the growth of zinc oxide. Many software’s are available for simulating and optimizing the solar cells based on these parameters. For this purpose, in this dissertation, I provide computational results relevant to n-ZnO/p-Si HJSC to overcome deficiencies that have been identified. While modeling and simulating the potential of the solar cell structure with AFORS-HET, it is essential to consider the constraints that exist in the real world. AFORS-HET was explicitly designed to mimic the multilayer solar cell arrangement. In AFORS-HET, we can add up to seven layers for solar cell layout. By using this software, we can figure out the open circuit voltage (VOC), the short circuit current (JSC), the quantum efficiency (QE, %), the heterojunction energy band structure, and the power conversion efficiency (PCE).

Ultrafast dynamics of femtosecond laser-induced high spatial frequency periodic structures on silicon surfaces

Femtosecond laser-induced periodic surface structures(LIPSS)have been extensively studied over the past few decades.In particular,the period and groove width of high-spatial-frequency LIPSS(HSFL)is much smaller than the diffraction limit,making it a useful method for efficient nanomanufacturing.However,compared with the low-spatial-frequency LIPSS(LSFL),the structure size of the HSFL is smaller,and it is more easily submerged.Therefore,the formation mechanism of HSFL is complex and has always been a research hotspot in this field.In this study,regular LSFL with a period of 760 nm was fabricated in advance on a silicon surface with two-beam interference using an 800 nm,50 fs femtosecond laser.The ultrafast dynamics of HSFL formation on the silicon surface of prefabricated LSFL under single femtosecond laser pulse irradiation were observed and analyzed for the first time using collinear pump-probe imaging method.In general,the evolution of the surface structure undergoes five sequential stages:the LSFL begins to split,becomes uniform HSFL,degenerates into an irregular LSFL,undergoes secondary splitting into a weakly uniform HSFL,and evolves into an irregular LSFL or is submerged.The results indicate that the local enhancement of the submerged nanocavity,or the nanoplasma,in the prefabricated LSFL ridge led to the splitting of the LSFL,and the thermodynamic effect drove the homogenization of the splitting LSFL,which evolved into HSFL.

Research on Silicon Carbide Dispersion-Reinforced Hypereutectic Aluminum-Silicon Electronic Packaging Materials

The objective of this study is to improve the mechanical properties and machining performance of high thermal conductivity and low expansion silicon carbide dispersion-strengthened hypereutectic aluminum-silicon electronic packaging materials to meet the needs of aviation,aerospace,and electronic packaging fields.We used the powder metallurgy method and high-temperature hot pressing technology to prepare SiC/Al-Si composite materials with different SiC contents(5vol%,10vol%,15vol%,and 20vol%).The results showed that as the SiC content increased,the tensile strength of the composite material first increased and then decreased.The tensile strength was the highest when the SiC content was 15%;the sintering temperature significantly affected the composite material’s structural density and mechanical properties.Findings indicated 700℃was the optimal sintering and the optimal SiC content of SiC/Al-Si composite materials was between 10%and 15%.Besides,the sintering temperature should be strictly controlled to improve the material’s structural density and mechanical properties.

Y/Al-5Ti-1B复合变质对Al-7Si合金微观组织和力学性能的影响

在传统铸造Al-Si合金中存在的粗大树枝晶α-Al相以及针状共晶Si严重割裂基体,显著降低合金的力学性能。为细化Al-Si合金的组织,提升其力学性能,本文使用扫描电镜(SEM)、电子探针(EPMA)、X射线衍射仪(XRD)以及万能材料试验机,研究了不同添加量Y/Al-5Ti-1B变质剂(Al-5Ti-1B均为2%,稀土Y分别为0.05%、0.1%、0.2%、0.3%、0.4%、0.5%,质量分数)对Al-7Si合金微观组织和力学性能的影响,并探究了其对Al-7Si合金的变质机理。实验结果表明,当Al-5Ti-1B含量为2%、稀土Y含量为0.4%时,变质效果最佳,共晶Si由粗大针状变为细小颗粒状,长和宽分别减小至2.7和0.8μm,相较于未经变质处理的Al-7Si合金,减小了90.6%和4.7%。合金抗拉强度由原来的168.1 MPa提升至209.1 MPa,增加了24.4%。同时伸长率从6.23%提升至9.62%,增长了54.4%。此外,合金的断裂方式也从脆性断裂转变为韧-脆混合断裂。

低压Si MOSFETs对SiC/Si级联器件短路特性的影响

由低压硅金属-氧化物-半导体场效应晶体管(Silicon Metal-Oxide-Semiconductor Field-Effect Transistor, Si MOSFET)和碳化硅结型场效应晶体管(Silicon Carbon Junction Field-Effect Transistor, SiC JFET)构成的SiC/Si级联(Cascode)器件,兼具了低压Si MOSFET易于驱动、SiC JFET高耐压低损耗等优点。该文采用实验和数值模拟的方式研究了低压Si MOSFET对SiC/Si级联器件短路特性的影响,结果表明,在短路过程中SiC/Si级联器件中的SiC JFET最高温度比单独的SiC JFET短路时的最高温度低,SiC/Si级联器件的短路失效时间得到了延长,并且随着Si MOSFET额定电压的增加,SiC/Si级联器件短路失效延长的时间也在增加。

原位合成Si/(SiO+Ag)复合负极材料及其电化学性能

将微米Si和纳米Ag_(2)O进行机械球磨,通过原位固相反应合成了Si基复合材料[Si/(SiO+Ag)],以沥青为碳源采用高温煅烧法制备了碳包覆Si基复合材料[Si/(SiO+Ag)-C]。采用XRD、XPS、SEM、TEM对复合材料进行了表征,测试了其电化学性能。结果表明,微米Si和纳米Ag_(2)O在球磨破碎过程中原位形成Si O和Ag颗粒,并附着在基体Si上,两种复合材料都展现出良好的倍率性能,在低电流密度(0.12 A/g)下Si/(SiO+Ag)和Si/(SiO+Ag)-C循环5次后分别表现出1422和1039 mA·h/g的可逆比容量,而在高电流密度(2.40 A/g)下仍能获得672和393 mA·h/g的可逆比容量;当电流密度再次恢复到0.12 A/g时,可逆比容量可恢复到1329和961m A·h/g,Si/(SiO+Ag)-C表现出更好的循环稳定性,经80次循环后可逆比容量仍稳定在943 m A·h/g,其突出的倍率性能归因于微米Si的颗粒细化以及球磨过程中原位反应形成纳米Ag颗粒导电特性,而循环稳定性的提高与原位形成Si O和包覆碳构成的双相缓冲结构有关。

超高强Ti-15Mo-2.7Nb-3Al-0.2Si钛合金的强化行为及模型

基于XRD、OM、SEM和TEM分析,研究超高强Ti-15Mo-2.7Nb-3Al-0.2Si钛合金的组织演变及强化行为。结果表明,位错强化和析出强化效应对该合金的屈服强度影响较大。冷轧+再结晶+冷轧+双时效组合工艺可获得1518 MPa的最高屈服强度,这主要归因于显微组织中的高密度残存位错及密集而细小的次生α相。建立复合强化模型,其预测误差在16.6%以内。此外,研究发现次生α相体积分数的增加可以不断强化晶内区域,这使得沿晶断裂开始出现并逐渐占据整个断裂面。

氧化硼对Al_(2)O_(3)-SiC-C质浇注料力学性能的影响

为了利用氧化硼“间接烧结”特性,进一步提升Al_(2)O_(3)-SiC-C质浇注料的力学性能,以氧化硼(≤0.075 mm)为助烧剂,制备了以FM60莫来石颗粒、致密刚玉、碳化硅、α-Al_(2)O_(3)微粉等为主要原料的浇注料,探究了氧化硼细粉加入量(加入质量分数分别为0、0.2%、0.4%和0.6%)对Al_(2)O_(3)-SiC-C质浇注料结构与性能的影响。结果表明,添加氧化硼细粉会显著提升浇注料的加水量,但其有利于晶须状莫来石的生成,从而加强骨料和基质间的结合强度,试样的力学性能得到明显提升。但当氧化硼细粉加入量提高至0.6%(w)时,试样中莫来石晶须长径比减小,试样的强度降低。综合以上结果,氧化硼最佳加入量为0.4%(w)。

Si3N4工程陶瓷基底金刚石涂层生长规律及性能

为了避免氮化硅材料因产生裂纹或延伸破裂等造成的失效,利用热丝化学气相沉积法(Hot filament chemical vapor deposition,HFCVD)在氮化硅基底上沉积具有高硬度的金刚石涂层,采用单因素影响试验,分别探究碳源浓度、腔室压力、基底温度对金刚石成膜过程的影响机制,探究微米和纳米金刚石涂层的最优生长工艺参数。利用拉曼光谱仪(Raman)、X射线衍射仪(XRD)、扫描电子显微镜(SEM)和原子力显微镜(AFM)对不同参数制备出的金刚石的形核、表面形貌、薄膜质量、表面粗糙度等进行表征,利用洛氏硬度计分析膜基结合力。结果表明,腔室压力越大,活性物质到达基底的动能越小,不利于金刚石的成核和生长。生长速率和表面粗糙度主要受甲烷浓度的影响:甲烷浓度从1%到7%,生长速率从0.84μm/h上升到1.32μm/h;表面粗糙度Ra从53.4 nm降低到23.5 nm;甲烷浓度过高导致涂层脱落严重,膜基结合力变差;晶面形貌和金刚石含量受到基底温度的影响较为明显,随着温度升高,金刚石质量提高。综合基底温度、腔室压力对金刚石涂层的影响,确定最佳生长温度为900℃,气压为1 kPa。调节甲烷浓度1%为微米金刚石;甲烷浓度5%为纳米金刚石。研究方法可以优化在陶瓷基底上制备具有优异性能的金刚石薄膜的制备参数。

一种新型可调驱动电压的SiC/Si混合开关驱动电路

为提高碳化硅金属氧化物半导体场效应晶体管(silicon carbide metal oxide semiconductor filed effect transistor,SiC-MOSFET)与硅基绝缘栅极双极晶体管(silicon insulated gate bipolar transistor,Si-IGBT)并联混合开关(SiC/Si hybrid switch,SiC/Si HyS)的可靠性与适用性,该文提出一种可变驱动电压的SiC/Si HyS栅极驱动电路结构,采用一路脉冲宽度调制(pulse width modulation,PWM)控制信号和一个驱动芯片产生不同电压幅值的栅极控制信号,分别控制SiC/Si HyS中的SiC-MOSFET和Si-IGBT。相比于传统采用2个独立驱动电路的SiC/Si HyS驱动结构,该驱动电路大幅度降低SiC/Si HyS栅极驱动电路的复杂度,降低SiC-MOSFET关断过程中Si-IGBT误导通的可能性,提升混合开关的工作可靠性。该文首先分析所设计驱动电路工作原理,给出驱动电压调节方法;其次,建立耦合电容端电压纹波和系统启动时电容端电压暂态数学模型,通过仿真和实验验证模型准确性;搭建2 kW的SiC/Si混合开关Buck电路,验证该文所提混合开关驱动电路可行性,从SiC/Si HyS功率器件关断损耗、驱动电路功率损耗、成本以及体积4个方面分析所提驱动结构的优势。