The laser bending of single-crystal silicon sheet （0.2 mm in thickness） was investigated with JK701 Nd：YAG laser. The models were developed to describe the beam characteristics of pulsed laser. In order to simulate...The laser bending of single-crystal silicon sheet （0.2 mm in thickness） was investigated with JK701 Nd：YAG laser. The models were developed to describe the beam characteristics of pulsed laser. In order to simulate the process of laser bending, the FEM software ANSYS was used to predict the heat temperature and stress-strain fields. The periodic transformation of temperature field and stress-strain distribution was analyzed during pulsed laser scanning silicon sheet. The results indicate that the mechanism of pulsed laser bending silicon is a hybrid mechanism in silicon bending, rather than a simple mechanism of TGM or BM. This work also gets silicon sheet bent after scanning 6 times with pulsed laser, and its bending angle is up to 6.5°. The simulation and prediction results reach well agreement with the verifying experiments.展开更多
Over the past several decades, the texture, properties and manufacture of quality silicon steels have been investigated for application in magnetic devices requiring magnetically soft materials, such as transformers, ...Over the past several decades, the texture, properties and manufacture of quality silicon steels have been investigated for application in magnetic devices requiring magnetically soft materials, such as transformers, inductive devices, etc. Most recently, the factors effecting the texture and magnetic properties, e.g. impurities, rolling process and annealing process, have been greatly studied. The benefits of this study are that low core loss silicon steels with stable high-performance can be obtained through an economic production process. This review is intended to summarize the recent developments in the texture, properties, manufacture and application of oriented silicon steel sheets.展开更多
Commercial grain oriented silicon steel was cold rolled to thickness from 0.06 to 0.10 mm by cross shear rolling, then annealed in vacuum or a hydrogen atmosphere furnace. Deformation textures of the sheets were resea...Commercial grain oriented silicon steel was cold rolled to thickness from 0.06 to 0.10 mm by cross shear rolling, then annealed in vacuum or a hydrogen atmosphere furnace. Deformation textures of the sheets were researched by ODF method and reverse pole figure quantitative analyses. The results indicate that: in the condition of the cross shear rolling, the deformation texture of rolled sheet is generally similar to that of conventional rolled sheet, however, the texture distribution through the thickness is asymmetrical. With mismatch speed ratio increasing, the amount of Goss texture increases. With reduction ratio increasing, the intensity of γ-fiber becomes strong.展开更多
A siliconizing process to manufacture 6.5% Si steel sheet has been developed. Electric components, such as transformers and reactors are made easily from 6.5% Si steel sheet. However, improved workability is desirable...A siliconizing process to manufacture 6.5% Si steel sheet has been developed. Electric components, such as transformers and reactors are made easily from 6.5% Si steel sheet. However, improved workability is desirable to increase the applications. Therefore the improvement of workability of 6.5% Si steel sheet was investigated, and the results were obtained as follows: (a) workability of 6.5% Si steel sheet is deteriorated by grain boundary oxidization, (b) grain boundary oxidization can be restrained by the addition of C. Workability and magnetic properties of 6.5% Si steel sheet with C addition are discussed. Furthermore, it was found that the workability of high Si steel sheet was improved remarkably by varying the Si content gradient along the thickness without deterioration of high frequency magnetic properties. This newly developed magnetic gradient high Si steel sheet is also discussed.展开更多
The calculated and experimental research of sheet resistances of crystalline silicon solar cells by dry laser doping is investigated. The nonlinear numerical model on laser melting of crystalline silicon and liquid-ph...The calculated and experimental research of sheet resistances of crystalline silicon solar cells by dry laser doping is investigated. The nonlinear numerical model on laser melting of crystalline silicon and liquid-phase diffusion of phosphorus atoms by dry laser doping is analyzed by the finite difference method implemented in MATLAB. The melting period and melting depth of crystalline silicon as a function of laser energy density is achieved. The effective liquid-phase diffusion of phosphorus atoms in melting silicon by dry laser doping is confirmed by the rapid decrease of sheet resistances in experimental measurement. The plateau of sheet resistances is reached at around 15 Ω/. The calculated sheet resistances as a function of laser energy density is obtained and the calculated results are in good agreement with the corresponding experimental measurement. Due to the successful verification by comparison between experimental measurement and calculated results, the simulation results could be used to optimize the virtual laser doping parameters.展开更多
Baosteel＇ s Cr-free ultrathick J coat for non-oriented silicon steel sheets has excellent insulation performance and has been successfully applied to middle and large scale electric power trains and wind electric pow...Baosteel＇ s Cr-free ultrathick J coat for non-oriented silicon steel sheets has excellent insulation performance and has been successfully applied to middle and large scale electric power trains and wind electric power devices, which have stricter requirements than typical for coat insulation. In this paper, the characteristics and application of this type of coating for non-oriented silicon steel sheets were described in detail.展开更多
High-speed motor has the characteristics of high frequency, high temperature, and more stress, resulting in the field distribution inside the motor being complicated. To better study the electromagnetic characteristic...High-speed motor has the characteristics of high frequency, high temperature, and more stress, resulting in the field distribution inside the motor being complicated. To better study the electromagnetic characteristics of silicon steel sheet for high-speed motor. In this article, a study on the calculation model of silicon sheet electromagnetic characteristics considers the effects of electromagnetic, stress, and temperature factors. The study is divided into two parts, one is to propose the calculation model of silicon steel sheet’s permeability;the other is to improve the calculation model of silicon steel sheet’s loss. Then, the magnetic field, stress field, and temperature field of a surface mount high speed permanent magnet motor(SMHSPMSM) are analyzed by finite element method(FEM), and the results under the consideration of magnetic, stress, and temperature factors are brought into the calculation model for calculation. Finally, the accuracy of the calculation model for electromagnetic characteristics of silicon steel sheet is verified by comparing the calculated results with the finite element results.展开更多
We have tried to prepare the porous silicone resin sheet with the phase inversion method in parallel with the non solvent induced phase separation method. In the experiment, ethyl acetate and water were adopted as a g...We have tried to prepare the porous silicone resin sheet with the phase inversion method in parallel with the non solvent induced phase separation method. In the experiment, ethyl acetate and water were adopted as a good solvent and a poor solvent for silicone resin, respectively and ethyl alcohol as an amphiphilic solvent was used to increase the solubility of ethyl acetate in water and decrease the interfacial tension by mass transfer from water to ethyl acetate. The concentration of silicone resin in ethyl acetate and the oil soluble surfactant species were changed. Increasing the concentration of silicone resin could depress coalescence between the water droplets in the (W/O) dispersion and increase the porosity and pore number density of silicone resin sheet. Span 80 among the oil soluble surfactant species made the porosity and pore number density larger. The effect of physical proparties of liquids concerned on the porosity and pore number density was discussed on the basis of dispersing behavior of liquid droplets in the liquid-liquid dispersion. The hollow silicone resin particles could be prepared by applying the preparation method presented here.展开更多
Poly-crystalline silicon thin film has big potential of reducing the cost of solar cells. In this paper the preparation of thin film is introduced, and then the morphology of poly-crystalline thin film, is discussed. ...Poly-crystalline silicon thin film has big potential of reducing the cost of solar cells. In this paper the preparation of thin film is introduced, and then the morphology of poly-crystalline thin film, is discussed. On the film we developed poly-crystalline silicon thin film solar cells with efficiency up to 6.05% without anti-reflection coating.展开更多
CW-CO2 laser nitriding technique was applied to improve the properties （such as aging property and the core loss） of grain oriented silicon steel. The samples were nitrided with regular space. Laser power density an...CW-CO2 laser nitriding technique was applied to improve the properties （such as aging property and the core loss） of grain oriented silicon steel. The samples were nitrided with regular space. Laser power density and scanning speed were chosen as 7.8×10^5W·cm^-2 and 100mm·min^-1. By some laser irradiation, Fe4N and Fe3N were formed in the nitrided zone. The nitrided samples were annealed at the temperatures ranged from 100 to 90℃. The core loss of some interested samples was tested. The results show that the core loss of the nitrided samples with different thickness of 0.23 and 0.30mm decreased by 14.9% and 9.4% respectively, and the aging property were improved up to 800℃. The mechanism of laser nitriding to improve the properties of grain oriented silicon steel is discussed.展开更多
At present, machine fixed up and down repeatedly work is done by human. Although it is low cost and easy to change plate, there are many shortcomings of the work injury and the low work efficiency. Foreign automatic l...At present, machine fixed up and down repeatedly work is done by human. Although it is low cost and easy to change plate, there are many shortcomings of the work injury and the low work efficiency. Foreign automatic loading and unloading device has been developed, but the principle is more complex, the cost is higher, the energy consumption is larger, so the automatic loading and unloading robot came into being. Aiming at the transportation of mechanical raw material, an automatic device is designed to transport the scheduled raw materials to the specified position according to the processing requirements. The device has the characteristics of the simple operation, the rapid response and the large range of activities, and has obvious economic and environmental benefits. There is certain popularization value.展开更多
基金Projects (50975041, 50775019) supported by the National Natural Science Foundation of ChinaProjects (20062181, 2008S054) supported by Liaoning Province’s Government Science Fund, China
文摘The laser bending of single-crystal silicon sheet （0.2 mm in thickness） was investigated with JK701 Nd：YAG laser. The models were developed to describe the beam characteristics of pulsed laser. In order to simulate the process of laser bending, the FEM software ANSYS was used to predict the heat temperature and stress-strain fields. The periodic transformation of temperature field and stress-strain distribution was analyzed during pulsed laser scanning silicon sheet. The results indicate that the mechanism of pulsed laser bending silicon is a hybrid mechanism in silicon bending, rather than a simple mechanism of TGM or BM. This work also gets silicon sheet bent after scanning 6 times with pulsed laser, and its bending angle is up to 6.5°. The simulation and prediction results reach well agreement with the verifying experiments.
文摘Over the past several decades, the texture, properties and manufacture of quality silicon steels have been investigated for application in magnetic devices requiring magnetically soft materials, such as transformers, inductive devices, etc. Most recently, the factors effecting the texture and magnetic properties, e.g. impurities, rolling process and annealing process, have been greatly studied. The benefits of this study are that low core loss silicon steels with stable high-performance can be obtained through an economic production process. This review is intended to summarize the recent developments in the texture, properties, manufacture and application of oriented silicon steel sheets.
基金National Natural Science Foundation of China!(No. 59671037).
文摘Commercial grain oriented silicon steel was cold rolled to thickness from 0.06 to 0.10 mm by cross shear rolling, then annealed in vacuum or a hydrogen atmosphere furnace. Deformation textures of the sheets were researched by ODF method and reverse pole figure quantitative analyses. The results indicate that: in the condition of the cross shear rolling, the deformation texture of rolled sheet is generally similar to that of conventional rolled sheet, however, the texture distribution through the thickness is asymmetrical. With mismatch speed ratio increasing, the amount of Goss texture increases. With reduction ratio increasing, the intensity of γ-fiber becomes strong.
文摘A siliconizing process to manufacture 6.5% Si steel sheet has been developed. Electric components, such as transformers and reactors are made easily from 6.5% Si steel sheet. However, improved workability is desirable to increase the applications. Therefore the improvement of workability of 6.5% Si steel sheet was investigated, and the results were obtained as follows: (a) workability of 6.5% Si steel sheet is deteriorated by grain boundary oxidization, (b) grain boundary oxidization can be restrained by the addition of C. Workability and magnetic properties of 6.5% Si steel sheet with C addition are discussed. Furthermore, it was found that the workability of high Si steel sheet was improved remarkably by varying the Si content gradient along the thickness without deterioration of high frequency magnetic properties. This newly developed magnetic gradient high Si steel sheet is also discussed.
基金Supported by the National Natural Science Foundation of China under Grant No 61306076
文摘The calculated and experimental research of sheet resistances of crystalline silicon solar cells by dry laser doping is investigated. The nonlinear numerical model on laser melting of crystalline silicon and liquid-phase diffusion of phosphorus atoms by dry laser doping is analyzed by the finite difference method implemented in MATLAB. The melting period and melting depth of crystalline silicon as a function of laser energy density is achieved. The effective liquid-phase diffusion of phosphorus atoms in melting silicon by dry laser doping is confirmed by the rapid decrease of sheet resistances in experimental measurement. The plateau of sheet resistances is reached at around 15 Ω/. The calculated sheet resistances as a function of laser energy density is obtained and the calculated results are in good agreement with the corresponding experimental measurement. Due to the successful verification by comparison between experimental measurement and calculated results, the simulation results could be used to optimize the virtual laser doping parameters.
文摘Baosteel＇ s Cr-free ultrathick J coat for non-oriented silicon steel sheets has excellent insulation performance and has been successfully applied to middle and large scale electric power trains and wind electric power devices, which have stricter requirements than typical for coat insulation. In this paper, the characteristics and application of this type of coating for non-oriented silicon steel sheets were described in detail.
基金the Key International Cooperation of National Natural Science Foundation of China under Grant 51920105011Liaoning BaiQianWan Talents Programthe Natural Science Foundation of LiaoNing Province under Grant 2021-YQ-09。
文摘High-speed motor has the characteristics of high frequency, high temperature, and more stress, resulting in the field distribution inside the motor being complicated. To better study the electromagnetic characteristics of silicon steel sheet for high-speed motor. In this article, a study on the calculation model of silicon sheet electromagnetic characteristics considers the effects of electromagnetic, stress, and temperature factors. The study is divided into two parts, one is to propose the calculation model of silicon steel sheet’s permeability;the other is to improve the calculation model of silicon steel sheet’s loss. Then, the magnetic field, stress field, and temperature field of a surface mount high speed permanent magnet motor(SMHSPMSM) are analyzed by finite element method(FEM), and the results under the consideration of magnetic, stress, and temperature factors are brought into the calculation model for calculation. Finally, the accuracy of the calculation model for electromagnetic characteristics of silicon steel sheet is verified by comparing the calculated results with the finite element results.
文摘We have tried to prepare the porous silicone resin sheet with the phase inversion method in parallel with the non solvent induced phase separation method. In the experiment, ethyl acetate and water were adopted as a good solvent and a poor solvent for silicone resin, respectively and ethyl alcohol as an amphiphilic solvent was used to increase the solubility of ethyl acetate in water and decrease the interfacial tension by mass transfer from water to ethyl acetate. The concentration of silicone resin in ethyl acetate and the oil soluble surfactant species were changed. Increasing the concentration of silicone resin could depress coalescence between the water droplets in the (W/O) dispersion and increase the porosity and pore number density of silicone resin sheet. Span 80 among the oil soluble surfactant species made the porosity and pore number density larger. The effect of physical proparties of liquids concerned on the porosity and pore number density was discussed on the basis of dispersing behavior of liquid droplets in the liquid-liquid dispersion. The hollow silicone resin particles could be prepared by applying the preparation method presented here.
基金This work was supported by the Chinese Academy of Sciences within the Hundred Talent Project(No.99-019-422288)National High Technical Research and Development Programme of China(No.2001AA513060).
文摘Poly-crystalline silicon thin film has big potential of reducing the cost of solar cells. In this paper the preparation of thin film is introduced, and then the morphology of poly-crystalline thin film, is discussed. On the film we developed poly-crystalline silicon thin film solar cells with efficiency up to 6.05% without anti-reflection coating.
基金supported by the National Natural Science Foundation of China(No.50174020).
文摘CW-CO2 laser nitriding technique was applied to improve the properties （such as aging property and the core loss） of grain oriented silicon steel. The samples were nitrided with regular space. Laser power density and scanning speed were chosen as 7.8×10^5W·cm^-2 and 100mm·min^-1. By some laser irradiation, Fe4N and Fe3N were formed in the nitrided zone. The nitrided samples were annealed at the temperatures ranged from 100 to 90℃. The core loss of some interested samples was tested. The results show that the core loss of the nitrided samples with different thickness of 0.23 and 0.30mm decreased by 14.9% and 9.4% respectively, and the aging property were improved up to 800℃. The mechanism of laser nitriding to improve the properties of grain oriented silicon steel is discussed.
基金Supported by The National College Students’Entrepreneurship Practice Project(201510359010)Science and Technology Research Project of Anhui Province(15czz02030)
文摘At present, machine fixed up and down repeatedly work is done by human. Although it is low cost and easy to change plate, there are many shortcomings of the work injury and the low work efficiency. Foreign automatic loading and unloading device has been developed, but the principle is more complex, the cost is higher, the energy consumption is larger, so the automatic loading and unloading robot came into being. Aiming at the transportation of mechanical raw material, an automatic device is designed to transport the scheduled raw materials to the specified position according to the processing requirements. The device has the characteristics of the simple operation, the rapid response and the large range of activities, and has obvious economic and environmental benefits. There is certain popularization value.
