The deoxidation behaviors of alloys bearing barium in pipe steel were researched with MgO crucible under argon atmosphere in MoSi2 furnace at 1 873 K.The total oxygen contents of molten steel,the distribution,size and...The deoxidation behaviors of alloys bearing barium in pipe steel were researched with MgO crucible under argon atmosphere in MoSi2 furnace at 1 873 K.The total oxygen contents of molten steel,the distribution,size and morphology of deoxidation products in the steel were surveyed.The metamorphic mechanism for deoxidation products of alloy bearing barium was also discussed.The results show that applying alloy bearing barium to the pipe steel,very low total oxygen contents can be obtained,and deoxidation products,which easily float up from molten steel,can be changed into globular shape and uniformly distributed in steel.The equilibrium time of total oxygen is about 25 min,and the terminal total oxygen contents range from 0.002 0%to 0.002 2% after treating with SiCa wire.The best deoxidizers are SiAlBaCa and SiAlBaCaSr.展开更多
Complex deoxidizer is an important supplementary material for steelmaking,which can not only absorb liquid steel inclusions and improve the quality of molten steel,but also enhance deoxidation,desulfurization, dephosp...Complex deoxidizer is an important supplementary material for steelmaking,which can not only absorb liquid steel inclusions and improve the quality of molten steel,but also enhance deoxidation,desulfurization, dephosphorization,to prevent the molten steel suction and reduce the molten steel temperature loss.Currently,the complex deoxidizer all contain a certain amount of metal aluminium.The metal aluminium can not be determined for the steel.The entire aluminium contents were regarded as the content of approximate metal aluminium,that often bring great economic losses.Because A1,0,price is cheaper than metal aluminite powder,suppliers added a certain amount of Al_2O_3 in complex deoxidizer,pretend to be the metal aluminium to reap huge profits.This paper put forward a kind of method for determining aluminum,which would reduce loss of the enterprise.Research and put forward an iron triehloride,which extracted from Al metal from complex deoxidizer.Meantime,using orthogonal design of the experiment has been optimized for working conditions.The RSD of the samples are I. 07%-1.94%,the recoveries of the experiment results are 97.0%-110.0%,which expressed the precision and accuracy of the experiment are good.The establishment of the iron triehloride as a extractor,which is rapid and accurate for determination of Al metal in complex deoxidizer.展开更多
A thermodynamic model for predicting the equilibrium oxygens of 304 stainless steel was developed based on the theory of slag-steel equilibrium,the law of mass conservation,and the ion and molecule coexistence theory....A thermodynamic model for predicting the equilibrium oxygens of 304 stainless steel was developed based on the theory of slag-steel equilibrium,the law of mass conservation,and the ion and molecule coexistence theory.In the developed model,the Fe-Cr-Mn-Si-Al-S-O-melts reaction system and CaO-MgO-CaF_(2)-FeO-MnO-Al_(2)O_(3)-SiO_(2)-Cr2O_(3)slags were considered.The oxygen contents calculated by the model are in good agreement with experimental results and reference data.The equilibrium oxygen contents in 304 stainless steel mainly decrease with increasing binary basicity(w(CaO)/w(SiO_(2)),where w(i)is the mass percentage of component i)and decreasing temperature.Controlling binary basicity at 2.0 while maintaining temperatures lower than 1823 K will keep the oxygen contents in the 304 stainless steel lower than 15×10^(-6).The equilibrium oxygen contents may also be decreased with increasing content of MgO in slags,which is more significant at lower binary basicity.Besides,a small amount of FeO,MnO,and Al_(2)O_(3)(about 0-2.5 wt.%)in slags has little effect on equilibrium oxygen contents.Furthermore,it is found that the[C]-[O]reaction may occur during refining process but will not significantly affect the equilibrium oxygen contents.展开更多
The design, selection and application principles of complex alloys according to the requirements of making low-alloy steels are discussed. The designed complex alloys containing calcium, barium, magnesium, strontium, ...The design, selection and application principles of complex alloys according to the requirements of making low-alloy steels are discussed. The designed complex alloys containing calcium, barium, magnesium, strontium, rare earth elements, etc. should not only be able to deoxidize, desulphurize and refine liquid steel, but also alloy it. The application principles of alloys are as follows: using Si-Mn or Si-Mn-Al alloys for pre-deoxidizing, Si-Al-Ba or Si-Al-Ca-Ba alloys for final deoxidizing and Si-Ca-Ba-Mg(Sr) alloys for refining.展开更多
在实验室研究的基础上 ,在 L F/ VD精炼设备上进行了钡系合金对钢液的脱氧工业试验。试验发现采用Si Al Ba Ca脱氧时的全氧含量基本上在各个工位均低于采用 Al和 Fe Si Al脱氧 ,其脱氧产物上浮速度要快于用 Al脱氧 ,能够较快地使夹杂物...在实验室研究的基础上 ,在 L F/ VD精炼设备上进行了钡系合金对钢液的脱氧工业试验。试验发现采用Si Al Ba Ca脱氧时的全氧含量基本上在各个工位均低于采用 Al和 Fe Si Al脱氧 ,其脱氧产物上浮速度要快于用 Al脱氧 ,能够较快地使夹杂物数量达到较低的水平 ,且试验中夹杂物的球化作用比较明显 。展开更多
以不同脱氧方式熔炼的海洋工程用钢为研究对象,利用SEM、EDS及Image-Pro Plus 6.0软件对钢中夹杂物形貌、组成及尺寸分布等进行表征,通过3.5%NaCl溶液中阳极极化及腐蚀实验对钢中夹杂物诱发点蚀的行为进行探究。结果表明,与Al-Mg脱氧钢...以不同脱氧方式熔炼的海洋工程用钢为研究对象,利用SEM、EDS及Image-Pro Plus 6.0软件对钢中夹杂物形貌、组成及尺寸分布等进行表征,通过3.5%NaCl溶液中阳极极化及腐蚀实验对钢中夹杂物诱发点蚀的行为进行探究。结果表明,与Al-Mg脱氧钢相比,Ti-Mg脱氧钢中形成了含有TiO_x的复合氧化物,夹杂数量更多且平均尺寸更小(小于1μm),有利于MnS的异质形核析出及弥散分布;低腐蚀活性的含TiOx复合氧化物及高度分散、异质局部析出MnS夹杂具有较低的点蚀敏感性及自腐蚀催化作用,降低了点蚀的诱发及扩展,有效提高了钢的抗点蚀性能。展开更多
基金Item Sponsored by National Natural Science Foundation of China(50174012)Baoshan Iron and Steel Group Co
文摘The deoxidation behaviors of alloys bearing barium in pipe steel were researched with MgO crucible under argon atmosphere in MoSi2 furnace at 1 873 K.The total oxygen contents of molten steel,the distribution,size and morphology of deoxidation products in the steel were surveyed.The metamorphic mechanism for deoxidation products of alloy bearing barium was also discussed.The results show that applying alloy bearing barium to the pipe steel,very low total oxygen contents can be obtained,and deoxidation products,which easily float up from molten steel,can be changed into globular shape and uniformly distributed in steel.The equilibrium time of total oxygen is about 25 min,and the terminal total oxygen contents range from 0.002 0%to 0.002 2% after treating with SiCa wire.The best deoxidizers are SiAlBaCa and SiAlBaCaSr.
文摘Complex deoxidizer is an important supplementary material for steelmaking,which can not only absorb liquid steel inclusions and improve the quality of molten steel,but also enhance deoxidation,desulfurization, dephosphorization,to prevent the molten steel suction and reduce the molten steel temperature loss.Currently,the complex deoxidizer all contain a certain amount of metal aluminium.The metal aluminium can not be determined for the steel.The entire aluminium contents were regarded as the content of approximate metal aluminium,that often bring great economic losses.Because A1,0,price is cheaper than metal aluminite powder,suppliers added a certain amount of Al_2O_3 in complex deoxidizer,pretend to be the metal aluminium to reap huge profits.This paper put forward a kind of method for determining aluminum,which would reduce loss of the enterprise.Research and put forward an iron triehloride,which extracted from Al metal from complex deoxidizer.Meantime,using orthogonal design of the experiment has been optimized for working conditions.The RSD of the samples are I. 07%-1.94%,the recoveries of the experiment results are 97.0%-110.0%,which expressed the precision and accuracy of the experiment are good.The establishment of the iron triehloride as a extractor,which is rapid and accurate for determination of Al metal in complex deoxidizer.
基金This work was financially supported by Key R&D Plan of Shandong Province in 2021(Grant No.2021CXGC010209).
文摘A thermodynamic model for predicting the equilibrium oxygens of 304 stainless steel was developed based on the theory of slag-steel equilibrium,the law of mass conservation,and the ion and molecule coexistence theory.In the developed model,the Fe-Cr-Mn-Si-Al-S-O-melts reaction system and CaO-MgO-CaF_(2)-FeO-MnO-Al_(2)O_(3)-SiO_(2)-Cr2O_(3)slags were considered.The oxygen contents calculated by the model are in good agreement with experimental results and reference data.The equilibrium oxygen contents in 304 stainless steel mainly decrease with increasing binary basicity(w(CaO)/w(SiO_(2)),where w(i)is the mass percentage of component i)and decreasing temperature.Controlling binary basicity at 2.0 while maintaining temperatures lower than 1823 K will keep the oxygen contents in the 304 stainless steel lower than 15×10^(-6).The equilibrium oxygen contents may also be decreased with increasing content of MgO in slags,which is more significant at lower binary basicity.Besides,a small amount of FeO,MnO,and Al_(2)O_(3)(about 0-2.5 wt.%)in slags has little effect on equilibrium oxygen contents.Furthermore,it is found that the[C]-[O]reaction may occur during refining process but will not significantly affect the equilibrium oxygen contents.
文摘The design, selection and application principles of complex alloys according to the requirements of making low-alloy steels are discussed. The designed complex alloys containing calcium, barium, magnesium, strontium, rare earth elements, etc. should not only be able to deoxidize, desulphurize and refine liquid steel, but also alloy it. The application principles of alloys are as follows: using Si-Mn or Si-Mn-Al alloys for pre-deoxidizing, Si-Al-Ba or Si-Al-Ca-Ba alloys for final deoxidizing and Si-Ca-Ba-Mg(Sr) alloys for refining.
文摘在实验室研究的基础上 ,在 L F/ VD精炼设备上进行了钡系合金对钢液的脱氧工业试验。试验发现采用Si Al Ba Ca脱氧时的全氧含量基本上在各个工位均低于采用 Al和 Fe Si Al脱氧 ,其脱氧产物上浮速度要快于用 Al脱氧 ,能够较快地使夹杂物数量达到较低的水平 ,且试验中夹杂物的球化作用比较明显 。
文摘以不同脱氧方式熔炼的海洋工程用钢为研究对象,利用SEM、EDS及Image-Pro Plus 6.0软件对钢中夹杂物形貌、组成及尺寸分布等进行表征,通过3.5%NaCl溶液中阳极极化及腐蚀实验对钢中夹杂物诱发点蚀的行为进行探究。结果表明,与Al-Mg脱氧钢相比,Ti-Mg脱氧钢中形成了含有TiO_x的复合氧化物,夹杂数量更多且平均尺寸更小(小于1μm),有利于MnS的异质形核析出及弥散分布;低腐蚀活性的含TiOx复合氧化物及高度分散、异质局部析出MnS夹杂具有较低的点蚀敏感性及自腐蚀催化作用,降低了点蚀的诱发及扩展,有效提高了钢的抗点蚀性能。
