An Investigation into Forced Convection of a Nanofluid Flowing in a Rectangular Microchannel under the Influence of a Magnetic Field

In line with recent studies,where it has been shown that nanofluids containing graphene have a stronger capacity to boost the heat transfer coefficient with respect to ordinary nanofluids,experiments have been conducted using water with cobalt ferrite/graphene nanoparticles.In particular,a circular channel made of copper subjected to a constant heatflux has been considered.As nanoparticles are sensitive to the presence of a magneticfield,different conditions have been examined,allowing both the strength and the frequency of such afield to span relatively wide ranges and assuming different concentrations of nanoparticles.According to thefindings,the addition of nanoparticles to thefluid causes its rotation speed to increase by a factor of two,whereas ultraviolet radiation plays a negligible role.The amount of time required to attain the maximum rotation speed of the nanofluid and the Nusselt number have been measured under both constant and alternating magneticfields for a ferrofluid with a concentration of 0.5%and atflow Reynolds number of 550 and 1750.

Research on heat dissipation characteristics of magnetic fluid bearings under multiple field coupling effects

This paper analyzes the sources of heat losses in magnetic fluid bearings,proposes various cou-pling relationships of physical fields,divides the coupled heat transfer surfaces while ensuring the continuity of heat flux density,and analyzes the overall heat dissipation pathways of the bearings.By changing parameters such as input current,rotor speed,and inlet oil flow rate,the study applies a multi-physics field coupling method to investigate the influence of different parameters on the temper-ature field and heat dissipation patterns of the bearings,which is then validated through experi-ments.This research provides a theoretical basis for the optimal design of magnetic fluid bearing sys-tems.

Coupled Numerical Simulation of Electromagnetic and Flow Fields in a Magnetohydrodynamic Induction Pump

Magnetohydrodynamic(MHD)induction pumps are contactless pumps able to withstand harsh environments.The rate of fluid flow through the pump directly affects the efficiency and stability of the device.To explore the influence of induction pump settings on the related delivery speed,in this study,a numerical model for coupled electromagnetic and flow field effects is introduced and used to simulate liquid metal lithium flow in the induction pump.The effects of current intensity,frequency,coil turns and coil winding size on the velocity of the working fluid are analyzed.It is shown that the first three parameters have a significant impact,while changes in the coil turns have a negligible influence.The maximum increase in working fluid velocity within the pump for the parameter combination investigated in this paper is approximately 618%.As the frequency is increased from 20 to 60 Hz,the maximum increase in the mean flow rate of the working fluid is approximately 241%.These research findings are intended to support the design and optimization of these devices.

Magnetic Field Effect and Heat Transfer of Nanofluids within Waveform Microchannel

In this research,a numerical study of mixed convection of non-Newtonian fluid and magnetic field effect along a vertical wavy surface was investigated.A simple coordinate transformation to transform wavy surface to a flat surface is employed.A cubic spline collocation numerical method is employed to analyze transformed equations.The effect of various parameters such as Reynolds number,volume fraction 0-,Hartmann number,and amplitude of wave length was evaluated in improving the performance of a wavy microchannel.According to the presented results,the sinusoidal shape of the microchannel has a direct impact on heat transfer.By increasing the microchannel wave amplitude,the Nusselt number has risen.On the other hand,increasing the heat transfer in the higher wavelength ratio corrugated channel is seen as an effective method of increasing the heat transfer,especially at higher Reynolds numbers.The results showed that with increasing Hartmann numbers,the flow line near thewall becomesmore regular and,according to the temperature gradient created,theNusselt number growth.

Multi-band polarization switch based on magnetic fluid filled dual-core photonic crystal fiber

The research of high-performance polarization controllers is of great significance for expanding the application field of polarization optics. Here, a polarization switch is demonstrated by using a dual-core photonic crystal fiber(DCPCF)with four symmetrical air holes, placed above and below each core, filled with magnetic fluid(MF). The switch, which utilizes a magnetic field to change the coupling length ratio of the x and y polarization modes, enables dynamic tuning of the polarization state and extinction ratio. Numerical results show that when the working length is 36.638 mm, the magneto–optical polarization switch can operate in four communication bands, i.e., 1509 nm to 1520 nm, 1544 nm to1556 nm, 1578 nm to 1591 nm, and 1611 nm to 1624 nm. Moreover, the extinction ratio(ER) is greater than 20 d B in the fiber length range of 38.5 mm to 38.7 mm, indicating that the device has a good fault tolerance for the interception of the fiber length.

Friction Behavior of Magnetorheological Fluids with Different Material Types and Magnetic Field Strength

Magnetorheological （MR） fluid is a type of a smart material that can control its mechanical properties under a magnetic field. Iron particles in MR fluid form chain structures in the direction of an applied magnetic field, which is known as MR effect, resulting in variation of stiffness, shear modulus, damping and tribological characteristics of MR fluid. As MR effect depends on the density of particles in the fluid or the strength of a magnetic field, the experiments are conducted to evaluate the friction property under reciprocating motion by changing the types of MR fluid and the strength of a magnetic field. The material of aluminum, brass, and steel are chosen for specimen as they are the most common material in mechanical applications. The surfaces of specimen are also observed by optical microscope before and after experiments to compare the surfaces with test conditions. The comparing results show that the friction coefficient increases as the strength of a magnetic field increases in regardless of types of MR fluid or the material. Also the density of particle in MR fluid affects the friction characteristic. The results from this research can be used to improve the performance of mechanical applications using MR fluid.

Sealing mechanism of magnetic fluids

Sealing is one of the most successful apphcatious of magnetic fluids. However, the sealing pressure difference is not satisfactory. This paper theoretically analyzes the mechanism of magnetic fluids sealing. Main factors that have significant effects on the sealing ability include viscous stress on the interracial surface, magnetic surface tension, and the shape of the interracial surface. The sealing pressure with magnetic fluids decreases with increase of rotational speed. Experiments were carried out to study the stability of the interface between magnetic fluids and water. It has been shown that stability of the interface will be damaged by washing of water when the relative flow between water and magnetic fluid becomes turbulent.

Nanosized As_2O_3/Fe_2O_3 complexes combined with magnetic fluid hyperthermia selectively target liver cancer cells

AIM:To study the methods of preparing the magnetic nano-microspheres of Fe2O3 and As2O3/Fe2O3 complexes and their therapeutic effects with magnetic fluid hyperthermia(MFH). METHODS:Nanospheres were prepared by chemical co-precipitation and their shape and diameter were observed.Hemolysis,micronucleus,cell viability,and LD50 along with other in vivo tests were performed to evaluate the Fe2O3 microsphere biocompatibility.The inhibition ratio of tumors after Fe2O3 and As2O3/Fe2O3 injections combined with induced hyperthermia in xenograft human hepatocarcinoma was calculated. RESULTS:Fe2O3 and As2O3/Fe2O3 particles were round with an average diameter of 20 nm and 100 nm as observed under transmission electron microscope.Upon exposure to an alternating magnetic field(AMF),the temperature of the suspension of magnetic particles increased to 41-51℃,depending on different particle concentrations,and remained stable thereafter.Nanosized Fe2O3 microspheres are a new kind of biomaterial without cytotoxic effects.The LD50 of both Fe2O3 and As2O3/Fe2O3 in mice was higher than 5 g/kg.One to four weeks after Fe2O3 and As2O3/Fe2O3 complex injections into healthy pig livers,no significant differences were found in serum AST,ALT,BUN and Cr levels among thepigs of all groups(P>0.05),and no obvious pathological alterations were observed.After exposure to alternating magnetic fields,the inhibition ratio of the tumors was significantly different from controls in the Fe2O3 and As2O3/Fe2O3 groups(68.74% and 82.79%,respectively; P<0.01).Tumors of mice in treatment groups showed obvious necrosis,while normal tissues adjoining the tumor and internal organs did not. CONCLUSION:Fe2O3 and As2O3/Fe2O3 complexes exerted radiofrequency-induced hyperthermia and drug toxicity on tumors without any liver or kidney damage. Therefore,nanospheres are ideal carriers for tumortargeted therapy.

All-fiber optical modulator based on no-core fiber and magnetic fluid as cladding

An all-fiber optical modulator, which is composed of a piece of no-core fiber spliced between two sections of singlemode fibers and uses magnetic fluid（MF） as the cladding of the no-core fiber section, is proposed and investigated experimentally. Due to the tunable refractive index and absorption coefficient of MF, the output intensity can be modulated by controlling an applied magnetic field. The dependences of the modulator＇s temporal response on the working wavelength,the magnetic field strength（H）, and the MF＇s concentration are investigated experimentally. The results are explained qualitatively by the dynamic response process of MF under the action of a magnetic field. The findings are helpful for optimizing this kind of modulator.

Coaxial Twin-shaft Magnetic Fluid Seals Applied in Vacuum Wafer-Handling Robot

Compared with traditional mechanical seals,magnetic fluid seals have unique characters of high airtightness,minimal friction torque requirements,pollution-free and long life-span,widely used in vacuum robots.With the rapid development of Integrate Circuit（IC）,there is a stringent requirement for sealing wafer-handling robots when working in a vacuum environment.The parameters of magnetic fluid seals structure is very important in the vacuum robot design.This paper gives a magnetic fluid seal device for the robot.Firstly,the seal differential pressure formulas of magnetic fluid seal are deduced according to the theory of ferrohydrodynamics,which indicate that the magnetic field gradient in the sealing gap determines the seal capacity of magnetic fluid seal.Secondly,the magnetic analysis model of twin-shaft magnetic fluid seals structure is established.By analyzing the magnetic field distribution of dual magnetic fluid seal,the optimal value ranges of important parameters,including parameters of the permanent magnetic ring,the magnetic pole tooth,the outer shaft,the outer shaft sleeve and the axial relative position of two permanent magnetic rings,which affect the seal differential pressure,are obtained.A wafer-handling robot equipped with coaxial twin-shaft magnetic fluid rotary seals and bellows seal is devised and an optimized twin-shaft magnetic fluid seals experimental platform is built.Test result shows that when the speed of the two rotational shafts ranges from 0-500 r/min,the maximum burst pressure is about 0.24 MPa.Magnetic fluid rotary seals can provide satisfactory performance in the application of wafer-handling robot.The proposed coaxial twin-shaft magnetic fluid rotary seal provides the instruction to design high-speed vacuum robot.

Motion State Analysis and Seal Ability Study on the Magnetic Fluid Seal of Reciprocating Shaft

The authors have studied the motion mechanism of the magnetic fluid in a reciprocating seal gap,on the basis of which the authors obtain an anti pressure formula of the reciprocating shaft magnetic fluid seal from general Navier Stokes equation.In order to verify the correctness of the anti pressure formula,the authors have calculated the magnetic field distribution of seal structure and have gotten the maximum still anti pressure.Finally,the authors have verified the influence of speed and stroke on the seal anti pressure.

Linear stability of triple-diffusive convection in micropolar ferromagnetic fluid saturating porous medium

The triple-diffusive convection in a micropolar ferromagnetic fluid layer heated and soluted from below is considered in the presence of a transverse uniform magnetic field. An exact solution is obtained for a flat fluid layer contained between two free boundaries. A linear stability analysis and a normal mode analysis method are carried out to study the onset convection. For stationary convection, various parameters such as the medium permeability, the solute gradients, the non-buoyancy magnetization, and the micropolar parameters （i.e., the coupling parameter, the spin diffusion parameter, and the micropolar heat conduction parameter） are analyzed. The critical magnetic thermal Rayleigh number for the onset of instability is determined numerically for a sufficiently large value of the buoyancy magnetization parameter M1. The principle of exchange of stabilities is found to be true for the micropolar fluid heated from below in the absence of the micropolar viscous effect, the microinertia, and the solute gradients. The micropolar viscous effect, the microinertia, and the solute gradient introduce oscillatory modes, which are non-existent in their absence. Sufficient conditions for the non-existence of overstability are also obtained.

Characteristics of a magnetic fluid seal and its motion in an axial variable seal gap

With suitable assumptions a hydrodynamic model for the magnetic fluid motion in an axial variable gap seal was con- structed, and the solution to the equations of the model was deduced. The characteristics of a magnetic fluid seal and its motion, including the speed and pressure distribution, and the seal capacity of a magnetic fluid rotating seal were systematically described. The factors affecting seal capacity and ways to improve seal capacity based on the hydrodynamic model are discussed. The basic condition for dynamic seal availability is presented. The rotating speed and radius of the shafts should be decreased. The work can provide proof of a seal design or suggest ways to improve the seal capacity of magnetic fluid seals.

Sliding wear behavior of magnetorheological fluid for brass with and without magnetic field

A pin-on-disc wear apparatus was used to carry out the tribological experiment of brass to investigate the effect of a magnetorheological （MR） fluid on the interfacial surface with and without magnetic field. A series of tests were performed at the loads of 20-100 N and rotating speeds of 127-425 r/min for 2 h. The friction coefficient and wear rate were monitored by the wear apparatus, while the microstructures of the worn surfaces were observed by scanning electron microscope （SEM）. In addition, the chemical composition of worn surfaces was analyzed by energy dispersive X-ray spectroscopy （EDS）. Test results show different friction and wear performance of the MR fluid with and without magnetic field. At the same time, the effects of various normal loads and rotating speeds on the tribological behavior were investigated. Through the investigation of the morphologies of the wom surfaces under the magnetic field, it is found that the MR particles are clearly evident on the wom surface and the plastic flow of ridges causes the lateral extrusion. This directly indicates that abrasive wear is the predominant wear mechanism observed with MR fluid.

Effects of rotation and magnetic field on the nonlinear peristaltic flow of a second-order fluid in an asymmetric channel through a porous medium

In this paper, the effects of both rotation and magnetic field of the peristaltic transport of a second-order fluid through a porous medium in a channel are studied analytically and computed numerically. The material is represented by the constitutive equations for a second-order fluid. Closed-form solutions under the consideration of long wavelength and low Reynolds number is presented. The analytical expressions for the pressure gradient, pressure rise, friction force, stream function, shear stress, and velocity are obtained in the physical domain. The effects of the non-dimensional wave amplitude, porosity, magnetic field, rotation, and the dimensionless time-mean flow in the wave frame are analyzed theoretically and computed numerically. Numerical results are given and illustrated graphically in each case considered. Comparison was made with the results obtained in the presence and absence of rotation, magnetic field, and porosity. The results indicate that the effects of the non-dimensional wave amplitude, porosity, magnetic field, rotation, and the dimensionless time-mean flow are very pronounced in the phenomena.

Tunable magneto optic modulation based on magnetically responsive nanostructured magnetic fluid

Magnetic fluid is a kind of functional composite material with nanosized structure and unique optical properties. The tunable magneto-optic modulation of magnetic fluid under external magnetic field, achieved by adjusting the polarization direction of incident light, is investigated theoretically and experimentally in this work. The corresponding modulation depth and response time are obtained. The accompanying mechanisms are clarified by using the theory of dichroism of magtietic fluid and the aggregation/disintegration processes of magnetic particles within magnetic fluid when the external magnetic field turns on/off.

Cerebrospinal fluid flow in empty sella syndrome and normal sellar regions measured by phase-contrast quantitative magnetic resonance

We used MRI to examine 38 healthy females and 38 female patients with empty sella syndrome. Cerebrospinal fluid flow was examined in six regions of interest, including the anterior clinoid processes, posterior clinoid processes, and 1.0 mm, 1.0 mm, 2.0 mm, --2.0 mm from the midpoint of the line between the anterior and posterior clinoid processes. The results revealed no significant differences in cerebrospinal fluid flow velocity and discharge in a single cardiac cycle, or indicators of cardiac cycles in the control group, indicating that the cerebrospinal fluid flow was relatively steady in the saddle area of the normal brain. In the empty sella syndrome group, cerebrospinal fluid hernia into the saddle area triggered a fluctuation of the anterior and posterior clinoid processes in the saddle area, while the flow in other regions in the saddle area was relatively steady this resulted in significant differences in cerebrospinal fluid flow velocity and discharge, as well as the cardiac cycle.

Diffusion of chemically reactive species in third grade fluid flow over an exponentially stretching sheet considering magnetic field effects

This article addresses the magnetohydrodynamics(MHD) flow of a third grade fluid over an exponentially stretching sheet. Analysis is carried out in the presence of first order chemical reaction. Both cases of constructive and destructive chemical reactions are reported. Convergent solutions of the resulting differential systems are presented in series forms. Characteristics of various sundry parameters on the velocity, concentration, skin friction and local Sherwood number are analyzed and discussed.

Numerical Analysis of Magnetic Fluid Sealing Performance

The sealing performance of magnetic fluid is related to the magnetic fluid itself. Many factors can influence the magnetic field and the seal pressure differences of magnetic fluid seals, such as the sealing gap, the shaft eccentricity, the shaft diameter, the volume of the magnetic fluid and the centrifugal force. These factors are analyzed by numerical computation. When the seal material and structure are the same, the seal pressure difference is directly proportional to the magnetic field intensity and the saturation magnetization of the magnetic fluid. The sealing performance of the magnetic fluid will reduce with the increase of the sealing gap and shaft eccentricity. The sealing performance will increase with the volume of the magnetic fluid and decrease with the increase of the shaft diameter taking gravity into account. The increase of the shaft diameter is the same as the reduction of the volume of the magnetic fluid. The magnetic fluid cross-section can change because of the centrifugal force. Some improvements can reducc the influence of the centrifugal force. The centrifugal force can be utilized to improve the sealing performance.

Effects of induced magnetic field on peristaltic flow of Johnson-Segalman fluid in a vertical symmetric channel

In this paper, the influence of heat transfer and induced magnetic field on peristaltic flow of a Johnson-Segalman fluid is studied. The purpose of the present investigation is to study the effects of induced magnetic field on the peristaltic flow of non-Newtonian fluid. The two-dimensional equations of a Johnson-Segalman fluid are simplified by assuming a long wavelength and a low Reynolds number. The obtained equations are solved for the stream function, magnetic force function, and axial pressure gradient by using a regular perturbation method. The expressions for the pressure rise, temperature, induced magnetic field, pressure gradient, and stream function are sketched and interpreted for various embedded parameters.