期刊文献+
共找到1,798篇文章
< 1 2 90 >
每页显示 20 50 100
Effect of Flame Retardant Containing Phosphorus and Silicone on Thermal Performance of PC/ABS 被引量:4
1
作者 韦平 《Journal of Wuhan University of Technology(Materials Science)》 SCIE EI CAS 2009年第2期235-240,共6页
A flame retardant (DPA-SiN) containing phosphorus, nitrogen and silicon elements was synthesized. The halogen free flame retardant was incorporated into PC/ABS to improve its flame retardancy. The flame-retardant pr... A flame retardant (DPA-SiN) containing phosphorus, nitrogen and silicon elements was synthesized. The halogen free flame retardant was incorporated into PC/ABS to improve its flame retardancy. The flame-retardant properties of the PC/ABS/DPA-SiN blends were estimated by limiting oxygen index (LOI) values and CONE Calorimeter, while thermal stabilities were investi- gated through thermo gvavimetric analysis (TGA). The PC/ABS/DPA-SiN blends were thermally degraded at 400℃ for different amounts of time and studied by Fourier transform infrared spectroscopy (FTIR) to better understand the degradation behavior of PC/ABS/DPA-SiN. 展开更多
关键词 DOPO flame retardant PC/ABS SILICON
下载PDF
Boron nitride silicone rubber composite foam with low dielectric and high thermal conductivity
2
作者 Shuilai Qiu Hang Wu +1 位作者 Fukai Chu Lei Song 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2024年第4期224-230,共7页
Silicone rubber(SR)is widely used in the field of electronic packaging because of its low dielectric properties.In this work,the porosity of the SR was improved,and the dielectric constant of the SR foam was reduced b... Silicone rubber(SR)is widely used in the field of electronic packaging because of its low dielectric properties.In this work,the porosity of the SR was improved,and the dielectric constant of the SR foam was reduced by adding expanded microspheres(EM).Then,the thermal conductivity of the system was improved by combining the modified boron nitride(f-BN).The results showed that after the f-BN was added,the dielectric constant and dielectric loss were much lower than those of pure SR.Micron-sized modified boron nitride(f-mBN)improved the dielectric and thermal conductivity of the SR foam better than that of nano-sized modified boron nitride(f-nBN),but f-nBN improved the volume resistivity,tensile strength,and thermal stability of the SR better than f-mBN.When the mass ratio of f-mBN and fnBN is 2:1,the thermal conductivity of the SR foam reaches the maximum value of 0.808 W·m^(-1)·K^(-1),which is 6.5 times that before the addition.The heat release rate and fire growth index are the lowest,and the improvement in flame retardancy is mainly attributed to the high thermal stability and physical barrier of f-BN. 展开更多
关键词 Foam COMPOSITES Dielectric properties Thermal conductivity Mechanical properties flame retardant
下载PDF
Synergistic Flame Retardant Effect of Ammonium Polyphosphate and Aluminum Hydroxide on Polyurethane 被引量:2
3
作者 曾丽娟 YANG Liu +2 位作者 AI Lianghui YE Zhibin 刘平 《Journal of Wuhan University of Technology(Materials Science)》 SCIE EI CAS 2022年第3期533-539,共7页
The flame-retardant properties of polyurethane(PU)containing ammonium polyphosphate(APP)and aluminum hydroxide(ATH)were investigated.Moreover,the flame retardant performance was investigated through thermogravimetric ... The flame-retardant properties of polyurethane(PU)containing ammonium polyphosphate(APP)and aluminum hydroxide(ATH)were investigated.Moreover,the flame retardant performance was investigated through thermogravimetric analysis,limiting oxygen index(LOI),vertical combustion(UL 94),and cone calorimeter.When 15 wt%APP and 5 wt%ATH were added together,the PU/15%APP/5%ATH sample shows better thermal stability and flame-retardant properties.When 15 wt%APP and 5 wt%ATH were added together,the LOI value of the PU/15%APP/5%ATH sample was 30.5%,and UL 94 V-0 rating was attained.Compared with PU,the peak heat release rate(PHRR),total heat release(THR),and average effective heat combustion(av-EHC)of the PU/15%APP/5%ATH sample decreased by 43.1%,21.0%,and 29.4%,respectively.In addition,the flame-retardant mechanism was investigated through cone calorimeter.The APP/ATH addition simultaneously exerted condensed phase and gas phase flame retardant effects.APP and ATH have synergistic flame retardant properties. 展开更多
关键词 POLYURETHANE ammonium polyphosphate aluminum hydroxide synergistic flame retardance flame retardancy mechanism
下载PDF
AN EVA/UNMODIFIED NANO-MAGNESIUM HYDROXIDE/SILICONE RUBBER NANOCOMPOSITE WITH SYNERGISTIC FLAME RETARDANCY 被引量:1
4
作者 乔金樑 《Chinese Journal of Polymer Science》 SCIE CAS CSCD 2007年第5期437-440,共4页
A novel EVA/unmodified nano-magnesium hydroxide (NMH)/silicone rubber ternary nanocomposite was prepared by using a special compound flame retardant of NMH and silicone rubber (CFR). The flammability of the ternar... A novel EVA/unmodified nano-magnesium hydroxide (NMH)/silicone rubber ternary nanocomposite was prepared by using a special compound flame retardant of NMH and silicone rubber (CFR). The flammability of the ternary composite was studied by cone calorimeter test (CCT). Synergistic effect on flame retardancy was found between silicone rubber and NMH. EVA/CFR ternary nanocomposite showed the lowest peak heat release rate (PHRR) and mass loss rate (MLR) among the samples of virgin EVA, EVA composites. The synergistic flame retardancy of silicone rubber and NMH in EVA system is attributed to the enhanced char layers in the condensed phase that prevents the heat and mass transfer in the fire. 展开更多
关键词 EVA Nano-magnesium hydroxide silicone rubber flame retardancy.
下载PDF
Dynamic Mechanical Characterizations and Road Performances of Flame Retardant Asphalt Mortars and Concretes 被引量:1
5
作者 秦先涛 ZHU Siyue +1 位作者 LI Zuzhong CHEN Shuanfa 《Journal of Wuhan University of Technology(Materials Science)》 SCIE EI CAS 2015年第5期1036-1042,共7页
To research the dynamic mechanical properties and road performances of flame retardant asphalt mortars and mixtures, four different asphalt mortars/mixtures were prepared: a reference group and three asphalt mortars/m... To research the dynamic mechanical properties and road performances of flame retardant asphalt mortars and mixtures, four different asphalt mortars/mixtures were prepared: a reference group and three asphalt mortars/mixtures containing composite flame retardant materials(M-FRs) of different proportions. Temperature sweep, frequency sweep, repeated creep test, force ductility test and bending beam rheological test were carried out to research the dynamic mechanical properties of asphalt mortars containing M-FRs; wheeltracking test, low-temperature bending test and freeze-thaw split test were used to study the road performances of asphalt mixtures containing M-FRs. The results show that high-temperature performances of the three flame retardant asphalt mortars improve greatly, while low-temperature cracking resistances decline. Both hightemperature performances and water stabilities of asphalt mixtures containing M-FRs are quite good and exceed the specification requirements. However, their low-temperature performances decline in different degrees. In summary, besides their good flame retardancy, the flame retardant asphalt mortars and mixtures also exhibit acceptable road performance. 展开更多
关键词 asphalt mortar asphalt mixture composite flame retardant materials dynamic mechanical characterization road performance
下载PDF
Influence of aliphatic epoxy monomer on the blowing-out effect in the flame retardant epoxy resins
6
作者 张文超 宋廷鲁 杨荣杰 《Journal of Beijing Institute of Technology》 EI CAS 2016年第3期418-428,共11页
An aliphatic epoxy monomer"polypropyleneglycol-diglycidylether(PPGDGE,YF878)"is loaded in the epoxy resins(EP)to evaluate the influence of epoxy structure on the blowing-out effect,which is caused by 9,10-dihydr... An aliphatic epoxy monomer"polypropyleneglycol-diglycidylether(PPGDGE,YF878)"is loaded in the epoxy resins(EP)to evaluate the influence of epoxy structure on the blowing-out effect,which is caused by 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide(DOPO)and octaphenyl silsesquioxane(OPS).The flame retarding properties of these EP composites were tested using the LOI and UL-94 procedures.The pyrolytic gases produced and the thermal stability of the EP composites with different flame retardants were detected by TGA-FTIR in air.The negative effect of YF878 was detected from the TTI,HRR,and p-HRR results after the cone calorimeter test.The char produced by the EP composites after the cone calorimeter test was investigated by FTIR.It is proposed that the aliphatic chain of the YF878 is easy to break down and produce combustible gases,so it does not easily form a crosslinked structure in the condensed phase.These results are very helpful for investigation of the conditions under which the blowing-out effect in epoxy resins can be caused by synergy of phosphorous and silicon. 展开更多
关键词 epoxy resin silicon phosphorus flame retardancy blowing-out effect
下载PDF
PRELIMINARY STUDIES ON STRUCTURES AND PROPERTIES OF WATER-RETENTIVE, FLAME-RETARDANT ACRYLIC FIBERS
7
作者 刘兆峰 林伟平 +1 位作者 杨明远 吴宗铨 《Journal of China Textile University(English Edition)》 EI CAS 1990年第1期45-52,共8页
The blend fibers of acrylonitrile-vinylidene chloride-sodium methallysulfonate copolymer(AN-VDC-SMAS) and cellulose acetate (CA) with various blend ratios were investigated bymeans of SEM, DDV, WAXD, etc. The results ... The blend fibers of acrylonitrile-vinylidene chloride-sodium methallysulfonate copolymer(AN-VDC-SMAS) and cellulose acetate (CA) with various blend ratios were investigated bymeans of SEM, DDV, WAXD, etc. The results show that AN-VDC-SMAS and CA areincompatibale; the numerous microvoids in the blend fiber resulted from the phase seperationcan remarkably improve the water absorbability and the dyeing behavior but hardly influencethe mechanical properties. On the other hand, the crystal structure of the continuous phaseAN-VDC-SMAS is not influnced by the dispersed phase CA. 展开更多
关键词 compatibility CRYSTAL PERFECTION CRYSTAL structure morphology mechanical properties WATER absorbability flame retardancy DYEING saturation UPTAKE
下载PDF
A Novel Bio-Based Zirconium Phosphonate as a Flame Retardant and Smoke Suppressant for Epoxy Resin
8
作者 Xianling Fu Hongliang Ding +2 位作者 Xin Wang Lei Song Yuan Hu 《Journal of Renewable Materials》 SCIE EI 2022年第9期2303-2317,共15页
Although epoxy resin has been widely used in various fields,it still suffers from some problems including brittleness and flammability.In this study,a new phosphonic acid,N,N-bis(phosphomethyl)glycine(GDMP),was prepar... Although epoxy resin has been widely used in various fields,it still suffers from some problems including brittleness and flammability.In this study,a new phosphonic acid,N,N-bis(phosphomethyl)glycine(GDMP),was prepared by Mannich reaction with bio-based glycine and then a novel layered zirconium phosphonate(ZrGDMP)was synthesized using GDMP and zirconyl chloride hydrate as reactants.The chemical structure of ZrGDMP was well characterized by 1 H and 31P NMR,SEM,XRD and XPS.The effect of ZrGDMP on the flame retardancy,smoke suppression,strengthening and toughening performances of the epoxy matrix was investigated and evaluated.TGA results indicated that compared with pure EP,ZrGDMP-EP composites showed higher char yield due to the catalytic charring effect of ZrGDMP.The pure EP exhibited high flammability,while ZrGDMP-EP composites possessed excellent thermal stability and remarkable fire resistance.The PHRR,THR,and TSP values of 3wt%ZrGDMP-EP were obviously declined by 39.6%,40.2%,and 24.9%compared to these of pure EP.Moreover,the tensile and impact tests implied that the addition of ZrGDMP can significantly reinforce the toughness as well as the strength of EP in terms of higher impact strength(24.8 kJ/m^(2))and tensile strength(57.7 MPa),which was mainly contributed to the uniform dispersion of ZrGDMP within the EP matrix. 展开更多
关键词 Zirconium phosphonate epoxy resin flame retardant mechanical property
下载PDF
Recent Advances in Flame Retardant Bio-Based Benzoxazine Resins
9
作者 Hongliang Ding Xin Wang +1 位作者 Lei Song Yuan Hu 《Journal of Renewable Materials》 SCIE EI 2022年第4期871-895,共25页
Benzoxazines have attracted wide attention from academics all over the world because of their unique properties.However,most of the production and preparation of benzoxazine resins depends on petroleum resources now,e... Benzoxazines have attracted wide attention from academics all over the world because of their unique properties.However,most of the production and preparation of benzoxazine resins depends on petroleum resources now,especially bisphenol A-based benzoxazine.Therefore,owing to the environmental impacts,the development of bio-based benzoxazines is gaining more and more interest to substitute petroleum-based benzoxazines.Similar to petroleum-based benzoxazines,most of bio-based benzoxazines suffer from flammability.Thus,it is necessary to endow bio-based benzoxazines with outstanding flame retardancy.The purpose of this review is to summarize the latest advance in flame retardant bio-based benzoxazines.First,three methods of the synthesis of bio-based benzoxazines are introduced briefly.Furthermore,the curing mechanism of benzoxazine and the effect of branched chains on the curing behavior are also discussed and summarized.Subsequently,this review focuses on fully bio-based benzoxazines,partly bio-based benzoxazines,and bio-based benzoxazine composite materials in terms of flame retardancy as well as thermal stability and some other special properties.Finally,we give a brief comment on the challenges and prospects of the future development of flame retardant bio-based benzoxazines. 展开更多
关键词 Bio-based benzoxazine curing mechanism thermal stability flame retardancy
下载PDF
APP/ZB协效阻燃发泡木塑复合材料性能研究 被引量:1
10
作者 李奇 刘杰 +2 位作者 赵雅婷 赵雪松 雷志涛 《化工新型材料》 CAS CSCD 北大核心 2024年第1期264-269,共6页
为了拓宽发泡木塑复合材料(FWPC)的功能性,以沙柳木粉、高密度聚乙烯(PE-HD)为主要原料,纳米炭黑(Nano-CB)为导电填料,聚磷酸铵(APP)和硼酸锌(ZB)作为阻燃剂和抑烟成分进行复配,采用发泡工艺和模压法制备阻燃抗静电型发泡木塑复合材料... 为了拓宽发泡木塑复合材料(FWPC)的功能性,以沙柳木粉、高密度聚乙烯(PE-HD)为主要原料,纳米炭黑(Nano-CB)为导电填料,聚磷酸铵(APP)和硼酸锌(ZB)作为阻燃剂和抑烟成分进行复配,采用发泡工艺和模压法制备阻燃抗静电型发泡木塑复合材料。研究APP/ZB协效阻燃剂质量比对FWPC力学性能、阻燃抑烟性能及热稳定性能的影响。结果表明:当APP/ZB总加入量为20%,质量比为4∶1时,FWPC的各项性能相对较优,静曲强度、弹性模量、拉伸强度和冲击强度分别为30.11MPa、2636MPa、14.65MPa和3.72kJ/m^(2),氧指数达27.3%,属难燃级别;与单独加APP时相比,力学性能降低,烟释放速总量降低11.93%,CO产率峰值和平均CO产率分别降低80.6%和49.3%,总失重率从63.53%降至61.42%,热稳定性能提高;FWPC燃烧后炭层表面凹凸不平,复合材料的阻燃和抑烟性能得到提升。 展开更多
关键词 发泡木塑 力学性能 阻燃 抑烟 热稳定性能
下载PDF
植酸/茶多酚整理棉织物的阻燃及防紫外线性能
11
作者 廖喜林 王慧 +3 位作者 刘淑萍 李亮 李淑静 刘让同 《毛纺科技》 CAS 北大核心 2024年第3期22-27,共6页
为解决棉织物易燃烧和抗紫外线性能差的问题,提高其使用安全性,采用浸轧和喷涂结合的方法,通过植酸(PA)和茶多酚(Tea)协同作用制备了阻燃/抗紫外线棉织物,并研究了其阻燃、防紫外线、拉伸以及透气性性能。结果表明:质量分数2.5%的PA和25... 为解决棉织物易燃烧和抗紫外线性能差的问题,提高其使用安全性,采用浸轧和喷涂结合的方法,通过植酸(PA)和茶多酚(Tea)协同作用制备了阻燃/抗紫外线棉织物,并研究了其阻燃、防紫外线、拉伸以及透气性性能。结果表明:质量分数2.5%的PA和25 g/L的Tea复合整理的棉织物,其质量增加率仅为13.3%,而极限氧指数LOI值从原棉织物的17.5%提高到30.4%,离火自熄;PA/Tea整理棉织物与原棉织物相比,不仅热释放速率峰值(PHRR)下降了78.2%,其总热释放量(THR)和热释放能力(HRC)也分别下降了70.8%和78.3%,这意味着PA/Tea整理棉织物可以降低火灾放热强度,阻碍火焰快速传播;整理后的棉织物对UVB和UVC区域的紫外线具有良好的吸收性能,在实现阻燃和防紫外线功能的同时,保留了85.1%以上的透气性。 展开更多
关键词 棉织物 阻燃性 抗紫外线性能 浸渍法 阻燃机制
下载PDF
高性能有机硅灌封胶的制备与性能研究
12
作者 黄安民 朱伟 +2 位作者 符玄 颜渊巍 娄建坤 《绝缘材料》 CAS 北大核心 2024年第4期56-59,共4页
以端乙烯基硅油(1000 mPa·s)和侧乙烯基硅油(500 mPa·s)复配为基体树脂,含氢硅油为固化剂,乙烯基硅烷偶联剂为增黏剂,乙烯基MQ树脂和气相白炭黑为补强材料,氢氧化镁和硅系阻燃剂(FCA-107)为阻燃填料,成功制备了一款具有无卤... 以端乙烯基硅油(1000 mPa·s)和侧乙烯基硅油(500 mPa·s)复配为基体树脂,含氢硅油为固化剂,乙烯基硅烷偶联剂为增黏剂,乙烯基MQ树脂和气相白炭黑为补强材料,氢氧化镁和硅系阻燃剂(FCA-107)为阻燃填料,成功制备了一款具有无卤阻燃特性及优异力学性能和电气绝缘性能的有机硅灌封胶,并研究了硅油复配比例、各填料添加量对有机硅灌封胶性能的影响。结果表明:当端乙烯基硅油与侧乙烯基硅油的复配比例为5∶5,乙烯基硅烷偶联剂质量分数为3%,气相白炭黑质量分数为4%,乙烯基MQ树脂质量分数为30%,复配阻燃剂质量分数为20%时,有机硅灌封胶的综合性能达到最佳,其混合黏度为1842 mPa·s,拉伸强度为2.83 MPa,断裂伸长率为51.3%,拉伸剪切强度为2.12MPa,阻燃性能(UL 94)达到V-0级,电气强度达到24.3 kV/mm,体积电阻率为3.8×10^(15)Ω·cm,制备的有机硅灌封胶可以满足电子元器件的发展要求。 展开更多
关键词 有机硅灌封胶 低黏度 阻燃 力学性能 电气绝缘性能
下载PDF
可膨胀石墨/硅橡胶泡沫材料制备及其阻燃性能研究
13
作者 彭龙贵 叶瑞瑞 +3 位作者 张亮青 郝方涛 丁治玉 陈姝杉 《化工新型材料》 CAS CSCD 北大核心 2024年第7期86-92,共7页
硅橡胶材料兼具有机材料柔韧性和无机材料的热稳定性,已经在各个领域取得了显著的增长。通过低温法制备了具有优异阻燃性能、较好力学性能、低成本、泡孔结构丰富的可膨胀石墨(EG)/硅橡胶泡沫复合材料,其可有效提高硅橡胶泡沫的阻燃性... 硅橡胶材料兼具有机材料柔韧性和无机材料的热稳定性,已经在各个领域取得了显著的增长。通过低温法制备了具有优异阻燃性能、较好力学性能、低成本、泡孔结构丰富的可膨胀石墨(EG)/硅橡胶泡沫复合材料,其可有效提高硅橡胶泡沫的阻燃性能。结果表明:添加10%EG可以提高硅橡胶泡沫的拉伸强度、断裂伸长率和硬度等力学性能指标,同时硅橡胶泡沫的密度增加,回弹性有所降低。锥型量热仪(CCT)测试表明,EG的添加有助于延迟点火时间(TTI),降低热释放速率(HRR)和总热释放量(THR)等参数,且有助于提高抑烟性能。适量添加EG可以改善硅橡胶泡沫的热稳定性,过量会导致产生“飞灰”现象。这些特征结合在一起预示着EG/硅橡胶泡沫复合材料由于出色的阻燃性质可在阻燃材料领域得到广泛的应用。 展开更多
关键词 热稳定性 阻燃机理 力学性能 抑烟性能
下载PDF
阻燃纤维/不锈钢纤维混纺纱线的力学性能分析
14
作者 张喜昌 张海霞 《河南工程学院学报(自然科学版)》 2024年第2期1-5,共5页
为探讨混纺比对纱线性能的影响,测试分析了5种不同混纺比的阻燃腈纶(A)/阻燃黏胶(R)/不锈钢纤维(G)(A90/G10、A70/R20/G10、A45/R45/G10、A20/R70/G10、R90/G10)混纺纱线的力学性能。结果表明:混纺纱线的拉伸断裂性能、弹性、蠕变性能... 为探讨混纺比对纱线性能的影响,测试分析了5种不同混纺比的阻燃腈纶(A)/阻燃黏胶(R)/不锈钢纤维(G)(A90/G10、A70/R20/G10、A45/R45/G10、A20/R70/G10、R90/G10)混纺纱线的力学性能。结果表明:混纺纱线的拉伸断裂性能、弹性、蠕变性能、耐磨性能、扭转性能和弯曲性能随阻燃腈纶纤维混纺比的增加而提升;A45/R45/G10混纺纱线的疲劳性能较差,A90/G10混纺纱线的疲劳性能较好;在较大压力下,A70/R20/G10和R90/G10混纺纱线的压缩性能较好,在较小压力下,A20/R70/G10混纺纱线的压缩性能较好。 展开更多
关键词 阻燃黏胶纤维 阻燃腈纶纤维 不锈钢纤维 混纺比 力学性能
下载PDF
基于光谱学分析的硬质聚氨酯泡沫/钢渣/次磷酸铝复合材料阻燃机理研究
15
作者 刘梦茹 戴震 +4 位作者 龙红明 张浩 季益龙 杨亚东 唐刚 《光谱学与光谱分析》 SCIE EI CAS CSCD 北大核心 2024年第5期1487-1493,共7页
硬质聚氨酯泡沫(RPUF)的优异性能使其在各领域被广泛应用,但本身的易燃性为其在应用过程中埋下了巨大的安全隐患。钢渣(SS)作为提炼铁精矿后排放的固体废弃物,因其综合利用效率低下而造成一系列环境污染问题。为提高RPUF火灾安全性和钢... 硬质聚氨酯泡沫(RPUF)的优异性能使其在各领域被广泛应用,但本身的易燃性为其在应用过程中埋下了巨大的安全隐患。钢渣(SS)作为提炼铁精矿后排放的固体废弃物,因其综合利用效率低下而造成一系列环境污染问题。为提高RPUF火灾安全性和钢渣的附加值,将SS和次磷酸铝(AHP)引入到RPUF中,采用一步全水发泡法,制备一系列阻燃RPUF(FR-RPUF)复合材料。利用射线荧光光谱分析(XRF)探究了SS的化学成分,并系统研究了SS/AHP对FR-RPUF复合材料的微观形貌、热稳定性、阻燃性能以及气相产物的影响。XRF测试表明:钢渣的化学成分主要是CaO、SiO_(2)、Al_(2)O_(3)、Fe_(2)O_(3)、SO_(3)、MgO,以上金属氧化物能够作为协效剂促进聚合物成炭,并覆盖在材料表面阻隔燃烧热,在凝聚相达到阻燃目的。扫描电镜(SEM)测试表明:SS/AHP与RPUF基体的相容性较差导致FR-RPUF的泡孔出现不同程度的破损。阻燃测试表明:RPUF-1、RPUF-4、RPUF-5的极限氧指数分别为24.2 vol%、23.4 vol%、19.7 vol%,说明SS和AHP存在一定的协效阻燃作用,且RPUF/SS/AHP复合材料全部通过UL-94 V-0级别,满足外墙保温材料使用要求。热重-红外分析(TG-FTIR)测试表明:SS/AHP并未改变RPUF的降解过程,气相产物主要为碳氢化合物、羰基化合物、氨基甲酸酯、CO_(2)、异氰酸酯化合物、芳香族化合物、氰化氢、羰基化合物和酯类。对典型挥发性产物进一步分析发现,AHP和SS的加入促进RPUF基体早期降解。拉曼测试表明:当SS/AHP加入到RPUF后,RPUF-4的D峰与G峰的峰面积比(I_(D)/I_(G))值最小,表明SS/AHP的加入提高了FR-RPUF复合材料炭渣的致密性、石墨化程度。结合上述分析提出阻燃机理:首先AHP吸热分解,降低了火焰周围的温度,其分解的PO·自由基捕获游离的HO·抑制连锁反应,分解产生的焦磷酸铝与炭渣覆盖在基体表面,抑制了火焰和可燃气体的扩散。AHP分解产生的PH3遇氧气生成酸性物质(磷酸和聚磷酸),促进了RPUF脱水成炭,并且钢渣中的矿物成分会与磷酸或聚磷酸反应,形成致密炭层,与AHP共同发挥协效阻燃作用。研究为SS和AHP复配阻燃硬质聚氨酯泡沫材料提供理论依据和实验基础。 展开更多
关键词 光谱学分析 硬质聚氨酯泡沫 钢渣 次磷酸铝 复合材料 阻燃机理
下载PDF
无卤阻燃全水发泡聚氨酯硬质泡沫的研究进展
16
作者 冯洪福 苏有学 +6 位作者 李娜 孙超超 沈光耀 刘晓强 张振雨 沈勇坚 李荣博 《化工新型材料》 CAS CSCD 北大核心 2024年第5期52-57,共6页
聚氨酯硬质泡沫塑料是一种综合性能优异的功能材料,应用十分广泛。近年来,随着环保标准与防火要求的提高,与聚氨酯硬质泡沫相关的研究取得了可喜的成果。为了给后续研究提供参考,对比分析了氯氟烃、戊烷等物理发泡剂和全水化学发泡对阻... 聚氨酯硬质泡沫塑料是一种综合性能优异的功能材料,应用十分广泛。近年来,随着环保标准与防火要求的提高,与聚氨酯硬质泡沫相关的研究取得了可喜的成果。为了给后续研究提供参考,对比分析了氯氟烃、戊烷等物理发泡剂和全水化学发泡对阻燃的影响,介绍了阻燃聚氨酯硬质泡沫的发展概况,梳理了无卤阻燃聚氨酯硬质泡沫的阻燃机理,综述了阻燃聚氨酯硬质泡沫在重点领域的应用进展情况。 展开更多
关键词 聚氨酯 硬质泡沫 无卤阻燃 全水发泡 阻燃机理
下载PDF
氢氧化镁的表面改性及其在硅橡胶中的阻燃性能研究
17
作者 马树刚 万子岸 +3 位作者 刘星池 王世荣 李祥高 侯经纬 《现代化工》 CAS CSCD 北大核心 2024年第4期146-151,共6页
分别采用乙烯基三乙氧基硅烷(VTES)、乙基三乙氧基硅烷(ETES)以及3-(氨基丙基)三乙氧基硅烷(APTES)对氢氧化镁(MH)进行表面改性,研究了改性工艺对改性MH粒子表面特性的影响。结果表明,确定的最佳改性条件为:改性剂为VTES、改性剂质量分... 分别采用乙烯基三乙氧基硅烷(VTES)、乙基三乙氧基硅烷(ETES)以及3-(氨基丙基)三乙氧基硅烷(APTES)对氢氧化镁(MH)进行表面改性,研究了改性工艺对改性MH粒子表面特性的影响。结果表明,确定的最佳改性条件为:改性剂为VTES、改性剂质量分数为8%、反应温度为80℃、搅拌转速为500 r/min、反应时间为2.0 h。将改性MH共混入硅橡胶,当VTES-MH质量分数为50%时,与未添加MH的硅橡胶相比,VTES-MH/硅橡胶复合材料的拉伸强度和断裂伸长率仅分别降低了5%和11%,具有良好的力学性能;极限氧指数为40.2%,具有优良的阻燃性能。 展开更多
关键词 氢氧化镁 阻燃剂 改性 硅橡胶
下载PDF
ATH/ADP配比对EVA阻燃性能及机理转变的影响
18
作者 程博 安晓航 +1 位作者 李定华 杨荣杰 《无机材料学报》 SCIE EI CAS CSCD 北大核心 2024年第5期509-516,共8页
针对氢氧化铝(ATH)在对乙烯-醋酸乙烯酯共聚物(EVA)阻燃效率低的问题,将二乙基次磷酸铝(ADP)和ATH复配,用以提高EVA阻燃性能。本研究采用垂直燃烧(UL-94)、极限氧指数(LOI)和锥形量热仪(CONE)对材料的阻燃性能进行研究。结果表明,和EVA/... 针对氢氧化铝(ATH)在对乙烯-醋酸乙烯酯共聚物(EVA)阻燃效率低的问题,将二乙基次磷酸铝(ADP)和ATH复配,用以提高EVA阻燃性能。本研究采用垂直燃烧(UL-94)、极限氧指数(LOI)和锥形量热仪(CONE)对材料的阻燃性能进行研究。结果表明,和EVA/ATH复合材料相比,当ATH和ADP质量比为2∶1和1∶2时,垂直燃烧等级均从无等级提高到V-0级,LOI分别从34.5%提高到37.8%和42.8%。通过不同测试方法对以上两种配比的样品进行阻燃机理分析。结果表明,在ATH和ADP质量比为2:1的样品中,热分解释放的含磷化合物含量较低,而且形成的磷酸铝(AlPO4)促使炭层更致密连续,热分解产生的残炭量高于理论值,因此该配比下阻燃机理以凝聚相为主导。在ATH和ADP质量比为1∶2的样品中,炭层孔洞较多,热分解产生的残炭量低于理论值,但气相产物中出现较多含磷化合物,因此该配比下阻燃机理以气相主导。 展开更多
关键词 氢氧化铝 二乙基次磷酸铝 乙烯-醋酸乙烯酯共聚物 阻燃机理
下载PDF
环氧树脂阻燃剂研究新进展
19
作者 陈明奇 张兆峰 李仙会 《工程塑料应用》 CAS CSCD 北大核心 2024年第2期181-186,192,共7页
回顾了近5年来国内外环氧树脂阻燃剂方面研究的最新进展,重点论述了金属阻燃剂、9,10-二氢-9-氧杂-10-磷杂菲-10-氧化物阻燃剂、多面体低聚硅倍半氧烷阻燃剂、生物基阻燃剂等在环氧树脂中的阻燃性能与作用机理,同时也介绍了以上各阻燃... 回顾了近5年来国内外环氧树脂阻燃剂方面研究的最新进展,重点论述了金属阻燃剂、9,10-二氢-9-氧杂-10-磷杂菲-10-氧化物阻燃剂、多面体低聚硅倍半氧烷阻燃剂、生物基阻燃剂等在环氧树脂中的阻燃性能与作用机理,同时也介绍了以上各阻燃剂对环氧树脂协同阻燃效果和机理。力学性能的平衡与改善是当前阻燃改性存在的热点,综述了环氧树脂通过改性提高阻燃性能并改善力学性能的研究现状,指出提升阻燃效率并提高阻燃剂在材料中的分散性,是改善环氧树脂力学性能的基础。最后对环氧树脂阻燃剂的不足之处与未来研究趋势进行展望。 展开更多
关键词 环氧树脂 协同阻燃剂 阻燃机理 阻燃性能 力学性能
下载PDF
含磷氮水性聚氨酯的制备及其在涤纶织物阻燃整理中应用
20
作者 徐豫松 周杰 +2 位作者 甘佳怡 张涛 张先明 《纺织学报》 EI CAS CSCD 北大核心 2024年第7期112-120,共9页
为提高水性聚氨酯(WPU)整理涤纶织物的阻燃效果,以含磷、氮希夫碱衍生物阻燃剂(DOPO-HAMB)为扩链剂合成本质阻燃WPU(FRWPU),通过浸渍法将FRWPU涂敷到涤纶织物表面,研究DOPO-HAMB在FRWPU中的质量百分比对热分解性能、阻燃性能、力学性能... 为提高水性聚氨酯(WPU)整理涤纶织物的阻燃效果,以含磷、氮希夫碱衍生物阻燃剂(DOPO-HAMB)为扩链剂合成本质阻燃WPU(FRWPU),通过浸渍法将FRWPU涂敷到涤纶织物表面,研究DOPO-HAMB在FRWPU中的质量百分比对热分解性能、阻燃性能、力学性能和耐水洗性能的影响。结果表明:与原涤纶织物相比,整理后涤纶织物最大热失重速率降低,降低幅度随DOPO-HAMB质量百分比的增加而增加;极限氧指数(LOI)提高至24.5%,比原涤纶织物提高了7.4%;垂直燃烧测试中的黑色烟雾减少,且损毁长度降低至9.7 cm;经向和纬向断裂强力、纬向断裂伸长率与原涤纶织物相比有所提升,而经向断裂伸长率有所降低;50次水洗后的LOI值为21.2%,仍然明显高于原涤纶织物。 展开更多
关键词 功能纺织品 涤纶织物 水性聚氨酯 阻燃整理 阻燃性能 力学性能 耐水洗性能
下载PDF
上一页 1 2 90 下一页 到第
使用帮助 返回顶部