The 0.4%Pt/xSTA-MIL-101(Cr)metal-acid bifunctional catalysts were prepared by impregnation using STA-MIL-101(Cr)as the support.The synthesized samples were verified to exhibit a typical octahedral structure of MIL-101...The 0.4%Pt/xSTA-MIL-101(Cr)metal-acid bifunctional catalysts were prepared by impregnation using STA-MIL-101(Cr)as the support.The synthesized samples were verified to exhibit a typical octahedral structure of MIL-101(Cr)and the pore structure was arranged orderly.The specific surface area of the samples was extremely high and the samples were made of micro-mesoporous composite materials.Silicotungstic acid could retain its Keggin structure in the 0.4%Pt/xSTA-MIL-101(Cr)samples and the catalyst possessed moderately strong Brønsted acid sites.Besides,the dispersion of Pt particles in MIL-101(Cr)was relatively high.n-Heptane isomerization was first used as a probe to test the novel 0.4%Pt/xSTA-MIL-10(Cr)catalyst.Compared with the conventional silicate catalysts,the catalytic performance of 0.4%Pt/30%STA-MIL-101(Cr)was significantly improved with a n-heptane conversion of 58.93%and an iso-heptane selectivity of 95.68%,respectively,under conditions covering a reaction time of 2 h and a reaction temperature of 260°C.The catalyst could still maintain a relatively high catalytic performance after a reaction time of 5 h.Compared with the non-noble metal catalyst,the catalytic efficiency of 0.4%Pt/30%STA-MIL-101(Cr)is relatively high.The mechanism model of n-heptane isomerization over 0.4%Pt/xSTA-MIL-101(Cr)catalyst was established.展开更多
Exo-tetrahydrodicyclopentadiene （exo-TCD） is an important high-energy fuel. Silicotungstic acid （SiW） immobilized on H-type β zeolite （Hβ） at room temperature were used to prepare the Hβ zeolite catalysts wit...Exo-tetrahydrodicyclopentadiene （exo-TCD） is an important high-energy fuel. Silicotungstic acid （SiW） immobilized on H-type β zeolite （Hβ） at room temperature were used to prepare the Hβ zeolite catalysts with different SiW contents. Catalytic performances of the catalysts were investigated during the preparation of exo-TCD via isomerization of endo-tetrahydrodicyclopentadiene （endo-TCD）. The properties of catalysts were characterized by XRD, temperature pro- grammed desorption of ammonia （NHa-TPD）, FT-IR, and N2-adsorption techniques. SiW was highly dispersed on the surface of Hβ zeolite, and the 10% SiW/Hβ zeolite catalyst had the highest amount of weak acidity among all SiW/Hβ zeolite catalysts. The influence of different factors on isomerization reaction was investigated. At a reaction temperature of 240 ℃, a n（cyclohexane） / n（endo-TCD） ratio of 10, a m（catalyst）/m（endo-TCD） ratio of 0.3, an initial pressure of 1.0 MPa, and a reaction time of 1.5 h in the presence of 10% SiW/Hβ catalyst calcined at 400 ℃, the conversion of endo-TCD reached up to 92.0%, with the yield of exo-TCD equating to 51.0%.展开更多
A 1D chain-like organic-inorganic hybrid rare earth derivative of polyoxometalate H0.5[Sm（H2O）6]0.25[Sm（H2O）5]0.25{[Sm（H2O）7][Sm（H2O）2（DMSO）][SiW11O39]}·4.5H2O has been firstly synthesized by reaction ...A 1D chain-like organic-inorganic hybrid rare earth derivative of polyoxometalate H0.5[Sm（H2O）6]0.25[Sm（H2O）5]0.25{[Sm（H2O）7][Sm（H2O）2（DMSO）][SiW11O39]}·4.5H2O has been firstly synthesized by reaction of α-K8SiW11O39.13H2O, HClO4, Sm2O3 with dimethyl sulfoxide （DMSO） and characterized by elemental analysis, IR spectra and single crystal X-ray diffraction. The neighboring polyanionic units {[Sm（H2O）7][Sm（H2O）2（DMSO）][SiWHO39]}^2- are bridged together to a 1D chain structure by means of [Sm（H2O）2（DMSO）]^3＋ ion.展开更多
A novel environmental friendly catalyst, H4SiW12O40/MCM-48, was prepared by impregnation method. The catalysts were characterized by means of XRD and FT-IR. The synthesis of n-butyl methacrylate catalyzed by H4SiW12O4...A novel environmental friendly catalyst, H4SiW12O40/MCM-48, was prepared by impregnation method. The catalysts were characterized by means of XRD and FT-IR. The synthesis of n-butyl methacrylate catalyzed by H4SiW12O40/MCM-48 was studied with methacrylic acid and n-butyl alcohol as reactants. H4SiW12O40/MCM-48 was an excellent catalyst for the synthesis of n-butyl methacrylate and Keggin structure ofH4SiW12O40 kept unchanged after impregnated on surface of the molecular sieve support. Effects of n（methacrylic acid）： n（n-butyl alcohol）, catalyst dosage, cyclohexane （water-stripped reagent） and reaction time on the yields of the product were investigated. The optimum conditions have been found, that is, molar ratio of acid to alcohol is 1：1.5, mass ratio of catalyst used to the reactant is 1.5%, cyclohexane is 10 mL and reaction time is 1.5h. Under these conditions, the yield of n-butyl methacrylate can reach 73.2%.展开更多
Highly dispersed silicotungstic acid-derived WO_(3) composited with ZrO_(2) supported on SBA-_(15) (WZ/SBA-_(15)) as an ordered mesoporous solid acid catalyst was prepared via a facile incipient wetness impregnation (...Highly dispersed silicotungstic acid-derived WO_(3) composited with ZrO_(2) supported on SBA-_(15) (WZ/SBA-_(15)) as an ordered mesoporous solid acid catalyst was prepared via a facile incipient wetness impregnation (IWI) method that active ingredients, ZrO_(2) and WO_(3), were impregnated into the channels of SBA-_(15) simultaneously with a subsequent calcination process. The relationship between catalyst nature and performance was explored by high resolution transmission electron microscopy (HRTEM), high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM), FT-IR, X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), N_(2) adsorption-desorption, NH_(3) temperature-programmed desorption (NH_(3)-TPD), and FT-IR of pyridine adsorption (Py-IR) characterization techniques. The catalytic performance of W_(12)Z_(15)/SBA-_(15) is not only greater than that of single component solid acid catalysts, WO_(3)/SBA-_(15) and ZrO_(2)/SBA-_(15), but also W_(12)/Z_(15)/SBA-_(15) prepared by impregnating active ingredients, ZrO_(2) and WO_(3), into SBA-_(15) in sequence. The outstanding performance of W_(12)Z_(15)/SBA-_(15) is derived from the strong interaction between ZrO_(2) and WO_(3), which results in more acid sites, and relatively high specific surface area, large pore volume, and ordered mesoporous structure of SBA-_(15). The characterization and reaction results clearly demonstrate that the synergy of ZrO_(2) and WO_(3) has a clear boost for the alkenylation. The optimized W_(12)Z_(15)/SBA-_(15)-500 achieves a 99.4% conversion of phenylacetylene and a 92.3% selectivity of main product α-arylstyrene for the alkenylation of p-xylene with phenylacetylene, with very low level of oligomers producing at the same time. Moreover, W_(12)Z_(15)/SBA-_(15)-500 shows excellent catalytic stability and regeneration. Therefore, W_(12)Z_(15)/SBA-_(15)-500 is a promising solid acid catalyst for the alkenylation.展开更多
We report layer-by-layer （LbL） assembly of TiO2 and H4SiW12O40 （SiW12） multilayer film on silicon wafers and glass slides for photocatalytic degradation of methyl orange （MO）. The photocatalytic efficiency of th...We report layer-by-layer （LbL） assembly of TiO2 and H4SiW12O40 （SiW12） multilayer film on silicon wafers and glass slides for photocatalytic degradation of methyl orange （MO）. The photocatalytic efficiency of the obtained multilayer film increases along with the decrease of pH and salt concentration of the incubation solution. The results show that MO can be almost re- moved in pH 2.0 solution without salt addition in the first 60 min incubation when MO concentration is lower than 15 mg/L. Different salts show an apparent inhibitory effect on photocatalytic degradation of MO with the order of ZnC12〉KCI〉 NaC1〉LiCI. The TiO2/SiW12 multilayer film maintains photocatalytic activity even after five degradation cycles. The reaction of MO photodegradation accords with an apparent first-order dynamics.展开更多
A simple and efficient method for the synthesis of pyrazoles through a silicotungstic acid (H_(4)SiW_(12)O_(40))-catalyzed cyclization of epoxides/aldehydes and sulfonyl hydrazides has been developed. Various epoxides...A simple and efficient method for the synthesis of pyrazoles through a silicotungstic acid (H_(4)SiW_(12)O_(40))-catalyzed cyclization of epoxides/aldehydes and sulfonyl hydrazides has been developed. Various epoxides/aldehydes were smoothly reacted with sulfonyl hydrazides to furnish regioselectivity 3,4-disubstituted 1H-pyrazoles. The application of such an earth-abundant, readily accessible, and nontoxic catalyst provides a green approach for the construction of 3,4-disubstituted 1H-pyrazoles. A plausible reaction mechanism has been proposed on the basis of control experiments, GC-MS and DFT calculations.展开更多
文摘The 0.4%Pt/xSTA-MIL-101(Cr)metal-acid bifunctional catalysts were prepared by impregnation using STA-MIL-101(Cr)as the support.The synthesized samples were verified to exhibit a typical octahedral structure of MIL-101(Cr)and the pore structure was arranged orderly.The specific surface area of the samples was extremely high and the samples were made of micro-mesoporous composite materials.Silicotungstic acid could retain its Keggin structure in the 0.4%Pt/xSTA-MIL-101(Cr)samples and the catalyst possessed moderately strong Brønsted acid sites.Besides,the dispersion of Pt particles in MIL-101(Cr)was relatively high.n-Heptane isomerization was first used as a probe to test the novel 0.4%Pt/xSTA-MIL-10(Cr)catalyst.Compared with the conventional silicate catalysts,the catalytic performance of 0.4%Pt/30%STA-MIL-101(Cr)was significantly improved with a n-heptane conversion of 58.93%and an iso-heptane selectivity of 95.68%,respectively,under conditions covering a reaction time of 2 h and a reaction temperature of 260°C.The catalyst could still maintain a relatively high catalytic performance after a reaction time of 5 h.Compared with the non-noble metal catalyst,the catalytic efficiency of 0.4%Pt/30%STA-MIL-101(Cr)is relatively high.The mechanism model of n-heptane isomerization over 0.4%Pt/xSTA-MIL-101(Cr)catalyst was established.
文摘Exo-tetrahydrodicyclopentadiene （exo-TCD） is an important high-energy fuel. Silicotungstic acid （SiW） immobilized on H-type β zeolite （Hβ） at room temperature were used to prepare the Hβ zeolite catalysts with different SiW contents. Catalytic performances of the catalysts were investigated during the preparation of exo-TCD via isomerization of endo-tetrahydrodicyclopentadiene （endo-TCD）. The properties of catalysts were characterized by XRD, temperature pro- grammed desorption of ammonia （NHa-TPD）, FT-IR, and N2-adsorption techniques. SiW was highly dispersed on the surface of Hβ zeolite, and the 10% SiW/Hβ zeolite catalyst had the highest amount of weak acidity among all SiW/Hβ zeolite catalysts. The influence of different factors on isomerization reaction was investigated. At a reaction temperature of 240 ℃, a n（cyclohexane） / n（endo-TCD） ratio of 10, a m（catalyst）/m（endo-TCD） ratio of 0.3, an initial pressure of 1.0 MPa, and a reaction time of 1.5 h in the presence of 10% SiW/Hβ catalyst calcined at 400 ℃, the conversion of endo-TCD reached up to 92.0%, with the yield of exo-TCD equating to 51.0%.
文摘A 1D chain-like organic-inorganic hybrid rare earth derivative of polyoxometalate H0.5[Sm（H2O）6]0.25[Sm（H2O）5]0.25{[Sm（H2O）7][Sm（H2O）2（DMSO）][SiW11O39]}·4.5H2O has been firstly synthesized by reaction of α-K8SiW11O39.13H2O, HClO4, Sm2O3 with dimethyl sulfoxide （DMSO） and characterized by elemental analysis, IR spectra and single crystal X-ray diffraction. The neighboring polyanionic units {[Sm（H2O）7][Sm（H2O）2（DMSO）][SiWHO39]}^2- are bridged together to a 1D chain structure by means of [Sm（H2O）2（DMSO）]^3＋ ion.
基金Acknowledgment： This work was financially supported by the Natural Science Foundation of Hubei Province, China （No. 2005ABA053） and Hubei Normal University.
文摘A novel environmental friendly catalyst, H4SiW12O40/MCM-48, was prepared by impregnation method. The catalysts were characterized by means of XRD and FT-IR. The synthesis of n-butyl methacrylate catalyzed by H4SiW12O40/MCM-48 was studied with methacrylic acid and n-butyl alcohol as reactants. H4SiW12O40/MCM-48 was an excellent catalyst for the synthesis of n-butyl methacrylate and Keggin structure ofH4SiW12O40 kept unchanged after impregnated on surface of the molecular sieve support. Effects of n（methacrylic acid）： n（n-butyl alcohol）, catalyst dosage, cyclohexane （water-stripped reagent） and reaction time on the yields of the product were investigated. The optimum conditions have been found, that is, molar ratio of acid to alcohol is 1：1.5, mass ratio of catalyst used to the reactant is 1.5%, cyclohexane is 10 mL and reaction time is 1.5h. Under these conditions, the yield of n-butyl methacrylate can reach 73.2%.
基金financially supported by the National Natural Science Foundation of China (No. 21276041)Chinese Ministry of Education via the Program for New Century Excellent Talents in University (No. NCET-12-0079)。
文摘Highly dispersed silicotungstic acid-derived WO_(3) composited with ZrO_(2) supported on SBA-_(15) (WZ/SBA-_(15)) as an ordered mesoporous solid acid catalyst was prepared via a facile incipient wetness impregnation (IWI) method that active ingredients, ZrO_(2) and WO_(3), were impregnated into the channels of SBA-_(15) simultaneously with a subsequent calcination process. The relationship between catalyst nature and performance was explored by high resolution transmission electron microscopy (HRTEM), high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM), FT-IR, X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), N_(2) adsorption-desorption, NH_(3) temperature-programmed desorption (NH_(3)-TPD), and FT-IR of pyridine adsorption (Py-IR) characterization techniques. The catalytic performance of W_(12)Z_(15)/SBA-_(15) is not only greater than that of single component solid acid catalysts, WO_(3)/SBA-_(15) and ZrO_(2)/SBA-_(15), but also W_(12)/Z_(15)/SBA-_(15) prepared by impregnating active ingredients, ZrO_(2) and WO_(3), into SBA-_(15) in sequence. The outstanding performance of W_(12)Z_(15)/SBA-_(15) is derived from the strong interaction between ZrO_(2) and WO_(3), which results in more acid sites, and relatively high specific surface area, large pore volume, and ordered mesoporous structure of SBA-_(15). The characterization and reaction results clearly demonstrate that the synergy of ZrO_(2) and WO_(3) has a clear boost for the alkenylation. The optimized W_(12)Z_(15)/SBA-_(15)-500 achieves a 99.4% conversion of phenylacetylene and a 92.3% selectivity of main product α-arylstyrene for the alkenylation of p-xylene with phenylacetylene, with very low level of oligomers producing at the same time. Moreover, W_(12)Z_(15)/SBA-_(15)-500 shows excellent catalytic stability and regeneration. Therefore, W_(12)Z_(15)/SBA-_(15)-500 is a promising solid acid catalyst for the alkenylation.
基金financially supported by the National Natural Science Foundation of China (21033005)the National Basic Research Program of China (973 Program, 2009CB930103)Natural Science Foundation of Shandong Province (2009ZRB01876)
文摘We report layer-by-layer （LbL） assembly of TiO2 and H4SiW12O40 （SiW12） multilayer film on silicon wafers and glass slides for photocatalytic degradation of methyl orange （MO）. The photocatalytic efficiency of the obtained multilayer film increases along with the decrease of pH and salt concentration of the incubation solution. The results show that MO can be almost re- moved in pH 2.0 solution without salt addition in the first 60 min incubation when MO concentration is lower than 15 mg/L. Different salts show an apparent inhibitory effect on photocatalytic degradation of MO with the order of ZnC12〉KCI〉 NaC1〉LiCI. The TiO2/SiW12 multilayer film maintains photocatalytic activity even after five degradation cycles. The reaction of MO photodegradation accords with an apparent first-order dynamics.
基金financially supported by the National Natural Science Foundation of China (Nos. 22001034 and 21804019)the Open Fund of the Jiangxi Province Key Laboratory of Synthetic Chemistry (No. JXSC202008)the Research Found of East China University of Technology (Nos. DHBK2019264, DHBK2019265 and DHBK2019267)。
文摘A simple and efficient method for the synthesis of pyrazoles through a silicotungstic acid (H_(4)SiW_(12)O_(40))-catalyzed cyclization of epoxides/aldehydes and sulfonyl hydrazides has been developed. Various epoxides/aldehydes were smoothly reacted with sulfonyl hydrazides to furnish regioselectivity 3,4-disubstituted 1H-pyrazoles. The application of such an earth-abundant, readily accessible, and nontoxic catalyst provides a green approach for the construction of 3,4-disubstituted 1H-pyrazoles. A plausible reaction mechanism has been proposed on the basis of control experiments, GC-MS and DFT calculations.
