期刊文献+
共找到32篇文章
< 1 2 >
每页显示 20 50 100
Numerical Simulation of the Settling Flux of Biodeposition in a Bay with Cage Culture Through Similarity Theory and a Simplified Pollution Source
1
作者 LIU Yao CHEN Yifan GE Changzi 《Journal of Ocean University of China》 CAS CSCD 2024年第1期247-254,共8页
The settling flux of biodeposition affects the environmental quality of cage culture areas and determines their environmental carrying capacity.Simple and effective simulation of the settling flux of biodeposition is ... The settling flux of biodeposition affects the environmental quality of cage culture areas and determines their environmental carrying capacity.Simple and effective simulation of the settling flux of biodeposition is extremely important for determining the spatial distribution of biodeposition.Theoretically,biodeposition in cage culture areas without specific emission rules can be simplified as point source pollution.Fluent is a fluid simulation software that can simulate the dispersion of particulate matter simply and efficiently.Based on the simplification of pollution sources and bays,the settling flux of biodeposition can be easily and effectively simulated by Fluent fluid software.In the present work,the feasibility of this method was evaluated by simulation of the settling flux of biodeposition in Maniao Bay,Hainan Province,China,and 20 sampling sites were selected for determining the settling fluxes.At sampling sites P1,P2,P3,P4,P5,Z1,Z2,Z3,Z4,A1,A2,A3,A4,B1,B2,C1,C2,C3 and C4,the measured settling fluxes of biodeposition were 26.02,15.78,10.77,58.16,6.57,72.17,12.37,12.11,106.64,150.96,22.59,11.41,18.03,7.90,19.23,7.06,11.84,5.19 and 2.57 g d^(−1)m^(−2),respectively.The simulated settling fluxes of biodeposition at the corresponding sites were 16.03,23.98,8.87,46.90,4.52,104.77,16.03,8.35,180.83,213.06,39.10,17.47,20.98,9.78,23.25,7.84,15.90,6.06 and 1.65 g d^(−1)m^(−2),respectively.There was a positive correlation between the simulated settling fluxes and measured ones(R=0.94,P=2.22×10^(−9)<0.05),which implies that the spatial differentiation of biodeposition flux was well simulated.Moreover,the posterior difference ratio of the simulation was 0.38,and the small error probability was 0.94,which means that the simulated results reached an acceptable level from the perspective of relative error.Thus,if nonpoint source pollution is simplified to point source pollution and open waters are simplified based on similarity theory,the setting flux of biodeposition in the open waters can be simply and effectively simulated by the fluid simulation software Fluent. 展开更多
关键词 fluent fluid simulation software pollution source simplification posterior difference ratio similarity theory Spear-man correlation
下载PDF
Load Reduction Test Method of Similarity Theory and BP Neural Networks of Large Cranes 被引量:4
2
作者 YANG Ruigang DUAN Zhibin +2 位作者 LU Yi WANG Lei XU Gening 《Chinese Journal of Mechanical Engineering》 SCIE EI CAS CSCD 2016年第1期145-151,共7页
Static load tests are an important means of supervising and detecting a crane's lift capacity. Due to space restrictions, however, there are difficulties and potential danger when testing large bridge cranes. To solv... Static load tests are an important means of supervising and detecting a crane's lift capacity. Due to space restrictions, however, there are difficulties and potential danger when testing large bridge cranes. To solve the loading problems of large-tonnage cranes during testing, an equivalency test is proposed based on the similarity theory and BP neural networks. The maximum stress and displacement of a large bridge crane is tested in small loads, combined with the training neural network of a similar structure crane through stress and displacement data which is collected by a physics simulation progressively loaded to a static load test load within the material scope of work. The maximum stress and displacement of a crane under a static load test load can be predicted through the relationship of stress, displacement, and load. By measuring the stress and displacement of small tonnage weights, the stress and displacement of large loads can be predicted, such as the maximum load capacity, which is 1.25 times the rated capacity. Experimental study shows that the load reduction test method can reflect the lift capacity of large bridge cranes. The load shedding predictive analysis for Sanxia 1200 t bridge crane test data indicates that when the load is 1.25 times the rated lifting capacity, the predicted displacement and actual displacement error is zero. The method solves the problem that lifting capacities are difficult to obtain and testing accidents are easily possible when 1.25 times related weight loads are tested for large tonnage cranes. 展开更多
关键词 similarity theory BP neural network large bridge crane load reduction equivalent test method
下载PDF
Similarity theory based method for MEMS dynamics analysis 被引量:2
3
作者 李瑰贤 彭云峰 张欣 《Journal of Harbin Institute of Technology(New Series)》 EI CAS 2008年第3期312-316,共5页
A new method for MEMS dynamics analysis is presented,ased on the similarity theory. With this method, two systems' similarities can be captured in terms of physics quantities/governed-equations amongst different e... A new method for MEMS dynamics analysis is presented,ased on the similarity theory. With this method, two systems' similarities can be captured in terms of physics quantities/governed-equations amongst different energy fields, and then the unknown dynamic characteristics of one of the systems can be analyzed according to the similar ones of the other system. The probability to establish a pair of similar systems among MEMS and other energy systems is also discussed based on the equivalent between mechanics and electrics, and then the feasibility of applying this method is proven by an example, in which the squeezed damping force in MEMS and the current of its equivalent circuit established by this method are compared. 展开更多
关键词 similarity theory MEMS dynamics equivalent between mechanics and electrics equivalent circuit
下载PDF
A Closure for Isotropic Turbulence Based on Extended Scale Similarity Theory in Physical Space
4
作者 Chu-Han Wang Le Fang 《Chinese Physics Letters》 SCIE CAS CSCD 2018年第8期5-8,共4页
The closure of a turbulence field is a longstanding fundamental problem, while most closure models are introduced in spectral space. Inspired by Chou's quasi-normal closure method in spectral space, we propose an ana... The closure of a turbulence field is a longstanding fundamental problem, while most closure models are introduced in spectral space. Inspired by Chou's quasi-normal closure method in spectral space, we propose an analytical closure model for isotropic turbulence based on the extended scale similarity theory of the velocity structure function in physical space. The assumptions and certain approximations are justified with direct numerical simulation. The asymptotic scaling properties are reproduced by this new closure method, in comparison to the classical Batchelor model. 展开更多
关键词 DNS A Closure for Isotropic Turbulence Based on Extended Scale similarity theory in Physical Space
下载PDF
Application of similarity theory in the study of proton exchange membrane fuel cells:a comprehensive review of recent developments and future research requirements
5
作者 Fan Bai Le Lei +3 位作者 Zhuo Zhang Li Chen Lei Chen Wen-Quan Tao 《Energy Storage and Saving》 2022年第1期3-21,共19页
The diversity and complexity of the parameters involved in the modeling of proton exchange membrane fuel cells(PEMFCs)have restricted further research and applications of such cells,and the similarity theory is a prom... The diversity and complexity of the parameters involved in the modeling of proton exchange membrane fuel cells(PEMFCs)have restricted further research and applications of such cells,and the similarity theory is a promising solution to this problem.The similarity theory is an effective tool to obtain compact and generalized results with the same precision as that of the basic mathematical model.This paper presents a comprehensive review of the application of the similarity theory to most aspects of PEMFCs.The advantages of using the similarity theory,such as generality,reduction in the test effort,convenient comparisons and guidance to scale up the experiment,are discussed and analyzed.Although a number of similarity criteria have been proposed in recent years,the similarity theory is not as widely applied or well accepted in PEMFC research as in the heat transfer and fluid flow domain.The objective of this paper is to demonstrate the feasibility of performing a similarity analysis for such complex systems and encourage researchers to present a dimensionless expression of their results in the follow-up PEMFC research.A key challenge is to use the similarity analysis for a complete gas-water-electricity-heat-mechanics coupled with PEMFC system and obtain the correlation between the dimensionless output voltage/current and input similarity criteria.This review indicates that none of the existing models can achieve this objective,and further research pertaining to this aspect must be performed.Several recommendations to achieve this aim,including a hierarchical classification of the criteria,are provided. 展开更多
关键词 Proton exchange membrane fuel cell similarity theory Transport process Membrane electrode assembly Contamination measurement Electrochemical kinetics
原文传递
Observational Evidence for the Monin-Obukhov Similarity under All Stability Conditions 被引量:3
6
作者 牛生杰 赵丽娟 +3 位作者 陆春松 杨军 王静 王巍巍 《Advances in Atmospheric Sciences》 SCIE CAS CSCD 2012年第2期285-294,共10页
Data collected in the surface layer in a northern suburban area of Nanjing from 15 November to 29 December 2007 were analyzed to examine the MoninObukhov similarity for describing the turbulent fluctu ations of 3D win... Data collected in the surface layer in a northern suburban area of Nanjing from 15 November to 29 December 2007 were analyzed to examine the MoninObukhov similarity for describing the turbulent fluctu ations of 3D winds under all stability conditions and to obtain the turbulence characteristics under different weather conditions. The results show that the dimensionless standard deviations of turbulent velocity com ponents (σ u /u* , σ v /u* , σ w /u * ) and dimensionless turbulent kinetic energy (TKE) can be well described by "1/3" power law relationships under stable, neutral, and unstable conditions, with σ u /u * σ v /u * σ w /u* . Land use and land cover changes mainly impact dimensionless standard deviations of horizontal component fluctuations, but they have very little on those of the vertical component. The dimensionless standard devi ations of wind components and dimensionless TKE are remarkably affected by different weather conditions; the deviations of horizontal wind component and dimensionless TKE present fog day clear sky overcast cloudy; the trend of the vertical wind component is the reverse. The surface drag coefficient at a Nan jing suburban measurement site during the observation period was obviously higher than at other reported plains and plateau areas, and was approximately one order larger in magnitude than the reported plains areas. Dimensionless standard deviation of temperature declined with increasing |z /L| with an approximate "1/3" slope in unstable stratification and "2/3" slope in stable stratification. 展开更多
关键词 Monin-Obukhov similarity theory boundary stability boundary layer parameterization
下载PDF
IMPROVEMENT TO THE EVAPORATION DUCT MODEL BY INTRODUCING NONLINEAR SIMILARITY FUNCTIONS IN STABLE CONDITIONS 被引量:1
7
作者 丁菊丽 费建芳 +2 位作者 黄小刚 胡晓华 周鑫 《Journal of Tropical Meteorology》 SCIE 2011年第1期64-72,共9页
Modified refractivity (M) profile is an important parameter to describe the atmospheric refraction environment,as well as a key factor in uniquely evaluating electromagnetic propagation effects.In order to improve the... Modified refractivity (M) profile is an important parameter to describe the atmospheric refraction environment,as well as a key factor in uniquely evaluating electromagnetic propagation effects.In order to improve the model-derived M profile in stable (especially very stable) conditions,three nonlinear similarity functions,namely BH91,CB05,SHEBA07,are introduced in this paper to improve the original Babin_V25 model,and the performances of these modified models are verified based on the hydrometeorological observations from tower platforms,which are finally compared with the original Babin_V25 model and Local_HYQ92 model.Results show that introducing nonlinear similarity functions can significantly improve the model-derived M profile;especially,the newly developed SHEBA07 functions manage to reduce the predicted root mean square (rms) differences of M and M slope (for both 0-5m and 5-40m) by 64.5%,16.6%,and 60.4%,respectively in stable conditions.Unfortunately,this improved method reacts little on the evaporation duct height;in contrast,Local_HYQ92 model is capable of reducing the predicted rms differences of M,M slope (for both 0-5m and 5-40m),and evaporation duct height by 76.7%,40.2%,83.7%,and 58.0% respectively.Finally,a new recommendation is made to apply Local_HYQ92 and Babin_SHEBA07 in very stable conditions considering that M slope is more important than evaporation duct height and absolute M value in uniquely determining electromagnetic propagation effects. 展开更多
关键词 evaporation duct similarity theory flux-profile relationship nondimensional similarity functions stable boundary layer electromagnetic wave propagation radar detective ability
下载PDF
Design and Research of Similarity and its Serialization of the Flotation Machine's Key Structure 被引量:1
8
作者 DONG Yu-de DING Zhan-you +2 位作者 YANG Shan-lai BAI Su-cheng PAN Kai 《Computer Aided Drafting,Design and Manufacturing》 2014年第2期74-81,共8页
Aiming at the problems such as more repeatedly design and longer design cycle, in this paper, the similarity theory was introduced to the design process of the key structures of flotation machine. The impeller and U-s... Aiming at the problems such as more repeatedly design and longer design cycle, in this paper, the similarity theory was introduced to the design process of the key structures of flotation machine. The impeller and U-shaped tank of flotation machine system were analyzed as similarity unit. Meanwhile, the level of similarity of the units and the similarity of the system were calculated. Based on the analysis of the impeller and the size of U-shaped tank, the similarity criteria were derived. The derived conclusions are: (1) The relationship between the diameter of the impeller and the volume of the tank was power function and calculated as the similarity criteria of the impeller; (2) The relationship between the ratio between the U-shaped tank's cross-sectional area and impeller's diameter and the volume of the tank was power function and calculated as the similarity criterions of the U-shaped tank. Using the similarity criterion combined with computer technology and database technology to realize part and system serialization design. The results show that the research can efficiency. avoid repeatedly design, shorten design cycle, and raise the design 展开更多
关键词 SCM similarity theory similarity unit flotation machine SERIALIZATION
下载PDF
Scale Effects and a Method for Similarity Evaluation in Micro Electrical Discharge Machining
9
作者 LIU Qingyu ZHANG Qinhe +3 位作者 WANG Kan ZHU Guang FU Xiuzhuo ZHANG Jianhua 《Chinese Journal of Mechanical Engineering》 SCIE EI CAS CSCD 2016年第6期1193-1199,共7页
Electrical discharge machining(EDM) is a promising non-traditional micro machining technology that offers a vast array of applications in the manufacturing industry. However, scale effects occur when machining at th... Electrical discharge machining(EDM) is a promising non-traditional micro machining technology that offers a vast array of applications in the manufacturing industry. However, scale effects occur when machining at the micro-scale, which can make it difficult to predict and optimize the machining performances of micro EDM. A new concept of "scale effects" in micro EDM is proposed, the scale effects can reveal the difference in machining performances between micro EDM and conventional macro EDM. Similarity theory is presented to evaluate the scale effects in micro EDM. Single factor experiments are conducted and the experimental results are analyzed by discussing the similarity difference and similarity precision. The results show that the output results of scale effects in micro EDM do not change linearly with discharge parameters. The values of similarity precision of machining time significantly increase when scaling-down the capacitance or open-circuit voltage. It is indicated that the lower the scale of the discharge parameter, the greater the deviation of non-geometrical similarity degree over geometrical similarity degree, which means that the micro EDM system with lower discharge energy experiences more scale effects. The largest similarity difference is 5.34 while the largest similarity precision can be as high as 114.03. It is suggested that the similarity precision is more effective in reflecting the scale effects and their fluctuation than similarity difference. Consequently, similarity theory is suitable for evaluating the scale effects in micro EDM. This proposed research offers engineering values for optimizing the machining parameters and improving the machining performances of micro EDM. 展开更多
关键词 Electrical Discharge Machining (EDM) micro EDM Scale effect similarity theory similarity evaluating method
下载PDF
Numerical verification of similar Cam-clay model based on generalized potential theory 被引量:2
10
作者 钟志辉 杨光华 +2 位作者 傅旭东 温勇 张玉成 《Journal of Central South University》 SCIE EI CAS 2014年第12期4707-4713,共7页
From the mathematical principles, the generalized potential theory can be employed to create constitutive model of geomaterial directly. The similar Cam-clay model, which is created based on the generalized potential ... From the mathematical principles, the generalized potential theory can be employed to create constitutive model of geomaterial directly. The similar Cam-clay model, which is created based on the generalized potential theory, has less assumptions,clearer mathematical basis, and better computational accuracy. Theoretically, it is more scientific than the traditional Cam-clay models. The particle flow code PFC3 D was used to make numerical tests to verify the rationality and practicality of the similar Cam-clay model. The verification process was as follows: 1) creating the soil sample for numerical test in PFC3 D, and then simulating the conventional triaxial compression test, isotropic compression test, and isotropic unloading test by PFC3D; 2)determining the parameters of the similar Cam-clay model from the results of above tests; 3) predicting the sample's behavior in triaxial tests under different stress paths by the similar Cam-clay model, and comparing the predicting results with predictions by the Cam-clay model and the modified Cam-clay model. The analysis results show that the similar Cam-clay model has relatively high prediction accuracy, as well as good practical value. 展开更多
关键词 generalized potential theory similar Cam-clay model modified Cam-clay model numerical test PFC3D
下载PDF
旋转条件下基于相似理论U形通道流动阻力研究
11
作者 由儒全 李采睿 李海旺 《风机技术》 2023年第5期45-51,共7页
In this paper,the numerical simulation method is used to study the flow resistance law of u-shaped channels under rotating conditions based on similarity theory.The study compares three geometric models:real model,com... In this paper,the numerical simulation method is used to study the flow resistance law of u-shaped channels under rotating conditions based on similarity theory.The study compares three geometric models:real model,completely similar model and incompletely similar model for cooling typical U-shaped channels inside turbine rotating blades.The completely similar model is geometrically 4.8 times magnification of the real model,and the rotation radius ratio of the real model is 5.4 times that of the incomplete similar model.It is found that the friction factor of the completely similar model increases with the rotation number,and the difference varies from 6%to 38%.The friction factor of the model after incomplete similarity amplification decreases with the increase of rotation number,and the difference varies from-2%to-30%.The friction factor of the laboratory imperfectly similar amplification model combined the effects of the above two laws,and the predicted difference was within 12%.This study provides a theoretical basis for subsequent experiments related to flow resistance. 展开更多
关键词 Flow Resistance Rotating Channel similarity theory Scaled-up Channel
下载PDF
Model test of the cutting properties of a shearer drum 被引量:12
12
作者 LIU Song-yong DU Chang-long CUI Xin-xia CHENG Xue 《Mining Science and Technology》 EI CAS 2009年第1期74-78,共5页
According to similarity theory, we carried out a dimensional analysis of the shearer drum correlation parameters and built similarity criteria. Based on these, similarity models of shearer drums were developed. Simult... According to similarity theory, we carried out a dimensional analysis of the shearer drum correlation parameters and built similarity criteria. Based on these, similarity models of shearer drums were developed. Simultaneously, based on an estab- lished cutting testbed of the coal and rock, cutting tests of different pick arrangements of the drum models were carried out, where the compressive strength of the analogous cutting material was 2.48 MPa and the drum rotary speed 67.5 r/min. The variance, the mean values, maxima and mean maxima of the torque load were analyzed for different type drum models. Moreover, the relation-ships between the type of pick arrangements and the cutting lump coal percentage were studied. The results indicate that the load fluctuation of the sequence drum is larger than that of the punnett square drum in the cutting process and the lump coal percentage and economic benefits of the sequence drum are inferior to the punnett square drum. We conclude that the punnett square drum is superior to the sequence drum. 展开更多
关键词 similarity theory dimensional analysis similarity criteria cutting test lump coal percentage
下载PDF
Current–voltage characteristics of hydrogen DC plasma torches with different sizes in an external axial magnetic field 被引量:2
13
作者 马杰 闻光东 +2 位作者 苏宝根 杨亦文 任其龙 《Chinese Physics B》 SCIE EI CAS CSCD 2015年第6期425-428,共4页
Current-voltage (l-V) characteristics of hydrogen DC plasma torches with different sizes in an external axial magnetic field under atmospheric pressure are reported. Three anodes with different diameters are adopted... Current-voltage (l-V) characteristics of hydrogen DC plasma torches with different sizes in an external axial magnetic field under atmospheric pressure are reported. Three anodes with different diameters are adopted in a 50-kW torch: 25 mm, 30 mm, and 35 nun, respectively. Two different diameters of anodes, that is, 100 mm and 130 mm, are adopted in a 1-MW plasma torch. The arc voltage shows a negative trend with the increase of arc current under the operating regimes. On the contrary, arc voltage shows a positive trend as the flow rate of carder gas increases, and a similar trend is found with increasing the external magnetic flux density. A similarity formula is constructed to correlate the experimental data of the torches mentioned above. Linear fitting shows that the Pearson correlation coefficient is 0.9958. 展开更多
关键词 magnetically rotating hydrogen plasma I-V characteristics similarity theory
下载PDF
Experiment and Simulation for Articulated Lifting Subsystem of 1000 m Deep Sea Mining System 被引量:1
14
作者 冯雅丽 张文明 +1 位作者 冯福璋 徐妍 《China Ocean Engineering》 SCIE EI 2007年第3期525-532,共8页
The experiment system of 1000 m deep sea mining system is built up with the similarity theory. Sine mechanism is used to simulate mining ship to generate lateral shock excitation by ocean wave. Simulation and experime... The experiment system of 1000 m deep sea mining system is built up with the similarity theory. Sine mechanism is used to simulate mining ship to generate lateral shock excitation by ocean wave. Simulation and experiment of spherical joint connecting deep sea mining system has been done in band six marine conditions. The results indicate that the moment of spherical joint connecting deep sea mining is smaller than that of the thread connected ones, the lifting pipe of sphelical joint is "flexible pipe". The flexural torque of the articulated lifting pipe system in pump and buffer is generally periodic variation with some irregularity, the value is stable on 60 N·S, and it is obviously smaller than that of the fixed lifting pipe system; The total displacement exhibits cyclic variation pattern, and the periodicity of them is longer than that of sea current. The results of experiment and simulation are basically consistent. And the analysis in the paper offers theoretical foundation of 1000 m deep sea mining system in China. 展开更多
关键词 articulated lifting system 1000 m deep sea mining pilot-scale system similarity theory lateral displacement
下载PDF
Systematic Method of Applying Structural Characteristics of Natural Organisms to Mechanical Structures 被引量:1
15
作者 行登海 陈五一 《Transactions of Tianjin University》 EI CAS 2011年第4期293-297,共5页
Structural bionic design lacks mature and scientific theories, and the excellent structural characteristics of natural organisms sometimes cannot be transferred into engineering structures effectively. Aiming at overc... Structural bionic design lacks mature and scientific theories, and the excellent structural characteristics of natural organisms sometimes cannot be transferred into engineering structures effectively. Aiming at overcoming the existing problems, this paper summarizes three related theories: similarity theory, fuzzy evaluation theory and optimization theory. Based on the related theories, a method of structural bionic design is introduced, which includes four steps: selecting the most useful structural characteristic of natural organism; analyzing the structural characteristic finally chosen for engineering problem; completing the structural bionic design for engineering structure; and verifying the structural bionic design. Similarity theory and fuzzy evaluation theory are employed to achieve Step 1. In Step 2 and Step 3, optimization theory is employed to analyze the parameters of structures. Together with the thoughts of simplification and grouping, optimization theory can reveal the relationship between organism structure and engineering structure, providing a way to structural bionic design. A general evaluation criterion is proposed in Step 4, which is feasible to evaluate the performance of different structures. Finally, based on the method, a structural bionic design of thin-walled cylindrical shell is introduced. 展开更多
关键词 structural bionic design similarity theory fuzzy evaluation OPTIMIZATION evaluation criterion
下载PDF
Theoretical Study of Similar Experimental Method for Durability of Concrete under Artifi cial Climate Environment 被引量:2
16
作者 耿欧 FENG Tai +1 位作者 LI Debao LI Qingtao 《Journal of Wuhan University of Technology(Materials Science)》 SCIE EI CAS 2016年第2期345-354,共10页
Based on the similarity theory,a new experimentalmethod named Similar ExperimentalMethod for Durability of Concrete(SEMDC)was established.The existing experimentalmethods for durability of concrete were summarized,a... Based on the similarity theory,a new experimentalmethod named Similar ExperimentalMethod for Durability of Concrete(SEMDC)was established.The existing experimentalmethods for durability of concrete were summarized,and the merits and demerits of these experimentalmethods were analyzed.Major factors affecting the durability of concrete were found through literature review.These factors were analyzed and the similarity criteria were established according to the similarity theory,and then the SEMDC was established according to the rules of these criteria.The various influentialfactors of the experimentalmethod were analyzed and the merits and demerits of this new experimentalmethod were discussed.According to SEMDC,changing the geometry shrinkage ratio was the only way to accelerate the test in order to keep the experiment similar to the reality.There were few other parameters which need to be changed in SEMDC,making the test easy to be achieved.According to SEMDC,time shrinkage ratio was the square of geometric shrinkage ratio,so an appropriate increase of the geometric shrinkage ratio could accelerate the test.Finally,an example of experimentaldesign for durability of concrete was devised theoretically base on SEMDC theory. 展开更多
关键词 concrete similarity theory artifi cial climate similar experiment accelerate durability
下载PDF
Improvement of surface flux calculation:A study based on measurements over alpine meadow in the eastern Tibet Plateau in summer
17
作者 李森 钟中 《Chinese Physics B》 SCIE EI CAS CSCD 2014年第2期651-660,共10页
An improved flux-gradient relationship between momentum φm(ζ) and sensible heat φh(ζ) is obtained by the use of the observational data over an alpine meadow in the eastern Tibet Plateau, in Maqu of China durin... An improved flux-gradient relationship between momentum φm(ζ) and sensible heat φh(ζ) is obtained by the use of the observational data over an alpine meadow in the eastern Tibet Plateau, in Maqu of China during the period June to August, 2010. The empirical coefficients of Businger-Dyer type function for the cases of unstable and stable stratification are modified. Non-dimensional vertical gradients of wind and potential temperature are calculated by three fitting func- tions; that is, the log-linear, log-square, and log--cubic functions, respectively. It is found that the von Karman constant approaches 0.4025 and the Prandtl number is about 1.10 based on the measurements in near-neutral conditions, which are within reasonable range proposed in previous studies. The revised flux-gradient profile functions of -1/5 power law for momentum and - 1/3 power law for sensible heat are best fitted in unstable stratification conditions. Meanwhile, 2/5 power law, instead of linear functions, is more appropriate in stable stratification cases for momentum and sensible heat. Com- pared with results from previous studies in which traditional functions are used, the momentum and sensible heat fluxes estimated by the revised profile functions in the current study are much closer to the observations for the unstable and stable stratification conditions. 展开更多
关键词 Monine-Obukhov similarity theory flux-gradient relationship Maqu experimental site turbulent fluxes
下载PDF
Winter estimation of surface roughness length over eastern Qinghai-Tibetan Plateau
18
作者 LunYu Shang Yu Zhang +4 位作者 ShiHua Lyu ShaoYing Wang YinHuan Ao SiQiong Luo ShiQiang Chen 《Research in Cold and Arid Regions》 CSCD 2017年第2期151-157,共7页
Based on the Monin-Obulchov similarity theory, a scheme was developed to calculate surface roughness length. Surface roughness length over the eastern Qinghai-Tibetan Plateau during the winter season was then estimate... Based on the Monin-Obulchov similarity theory, a scheme was developed to calculate surface roughness length. Surface roughness length over the eastern Qinghai-Tibetan Plateau during the winter season was then estimated using the scheme and eddy covariance measurement data. Comparisons of estimated and measured wind speeds show that the scheme is feasible to calculate surface roughness length. The estimated roughness lengths at the measurement site during unfrozen, frozen and melted periods are 3.23x10(-3), 2.27x10(-3) and 1.92x10(-3) m, respectively. Surface roughness length demonstrates a deceasing trend with time during the winter season. Thereby, setting the roughness length to be a constant value in numerical models could lead to certain degree of simulation errors. The variation of surface roughness length may be caused by the change in land surface characteristic. 展开更多
关键词 Qinghai-Tibetan Plateau surface roughness length Monin-Obuichov similarity theory least square fitting
下载PDF
ON THE FORMATION OF VORTEX RINGS AND PAIRS
19
作者 赵耀 王健平 是勋刚 《Acta Mechanica Sinica》 SCIE EI CAS CSCD 1998年第2期113-129,共7页
The axisymmetric vortex sheet model developed by Nitsche and Krasny had been extended to study the formation of vortex rings (pairs) at the edge of circular (2D) tube and opening. Computations based on this model wer... The axisymmetric vortex sheet model developed by Nitsche and Krasny had been extended to study the formation of vortex rings (pairs) at the edge of circular (2D) tube and opening. Computations based on this model were in good agreement with the experiments (Didden (1979) for circular tube and Auerbach (1987) for 2D tube and opening). Using this new model, evidences are provided to show that the main failure of the similarity theory (the false prediction of axial trajectory of vortex ring) is due to its ignorance of the self-induced ring velocity (mutual induction for vortex pair). The Glezer (1988)'s summary on the influence of piston speed upon the shedding circulation was also discussed, and finally the variation of core distribution of vortex ring with turning angle and piston speed was given. (Edited author abstract) 22 Refs. 展开更多
关键词 formation of vortex ring (pair) vortex method the similarity theory
全文增补中
Fuzzy TOPSIS method to primary crusher selection for Golegohar Iron Mine(Iran) 被引量:5
20
作者 Mohammad Javad Rahimdel Mohammad Karamoozian 《Journal of Central South University》 SCIE EI CAS 2014年第11期4352-4359,共8页
Selection of the crusher required a great deal of design regarding to the mine planning. Selection of suitable primary crusher from all of available primary crushers is a multi-criterion decision making(MCDM) problem.... Selection of the crusher required a great deal of design regarding to the mine planning. Selection of suitable primary crusher from all of available primary crushers is a multi-criterion decision making(MCDM) problem. The present work explores the use of technique for order performance by similarity to ideal solution(TOPSIS) with fuzzy set theory to select best primary crusher for Golegohar Iron Mine in Iran. Gyratory, double toggle jaw, single toggle jaw, high speed roll crusher, low speed sizer, impact crusher, hammer mill and feeder breaker crushers have been considered as alternatives. Also, the capacity, feed size, product size, rock compressive strength, abrasion index and application of primary crusher for mobile plants were considered as criteria for solution of this MCDM problem. To determine the order of the alternatives, closeness coefficient is defined by calculating the distances to the fuzzy positive ideal solution(FPIS) and fuzzy negative ideal solution(FNIS). Results of our work based on fuzzy TOPSIS method show that the gyratory is the best primary crusher for the studied mine. 展开更多
关键词 primary crusher multi-criterion decision making(MCDM) technique for order performance by similarity to ideal solution fuzzy set theory Golegohar Iron Mine gyratory crusher
下载PDF
上一页 1 2 下一页 到第
使用帮助 返回顶部