Simulation Modeling on Emergency Evacuation in High-Speed Railway Stations in China

A simulation study on occupant evacuation in high-speed railway stations(HSRSs) was presented in China.Pathfinder was employed as the simulation platform and a typical HSRS in a medium-sized city in China was selected for model development.The model was carefully calibrated and validated by comparing simulation results with field data.Evacuation efficiency could be improved with the increased door width while such effect decreased when the door width reached a marginal value.And the marginal value varied under different occupant densities.An exponential function between evacuation time and occupant density was fitted,indicating that occupant density significantly affected evacuation efficiency.A set of different evacuation strategies were compared,in terms of their evacuation performances.It was found that a balanced door usage would result in more efficient evacuations in HSRSs.Thus occupant flows were suggested to be managed considering door capacity.To avoid potential safety issues caused by such strategy(e.g.,more occupants could be evacuated from a smaller area designed with higher door capacity),occupants needed to enhance their awareness of following evacuation guidance instead of panic escape in emergencies.Moreover,such safety issues could also be avoided during the design phase that the evacuation capacity was designed to be proportional to the room capacity for each floor.The results of this study provide valuable information for HSRS design and flow management in China.

Simulation Modeling and Analysis of Operator-Machine Ratio

Based on a simulation model of a semiconductor manufacturer, operator-machine ratio （OMR） analysis is made using work study and time study. Through sensitivity analysis, it is found that labor utilization decreases with the increase of lot size. Meanwhile, it is able to identify that the OMR for this company should be improved from 1 ： 3 to 1 ： 5. An application result shows that the proposed model can effectively improve the OMR by 33%.

Analysis of the mechanical transfer characterization between lodged sugarcane and the cutter by simulation modeling with UMAT subroutine

Cutting the roots of sugarcane using cutters is a critical part of sugarcane harvesting,and the degree of breakage of the roots after cutting affects the germination and growth of sugarcane to a certain extent in the following year.However,the intricate interactions between the cutter and the stalk remain unclear.In order to fill this gap,this study first analyzed the conditions for no missed cuts during the operation of a double-disk cutter.Secondly,the research established a model of sugarcane stalk with anisotropy using the User-defined Material Mechanical Behavior(UMAT)subroutine based on the secondary development module of ABAQUS/Explicit.The cutting force curves obtained from simulation and test show a high correlation coefficient(R^(2)=0.9621),indicating the reliability of the model of sugarcane stalk in mechanical transfer.Subsequently,the simulation test of the blade rotating cutting characteristics in this study indicates that at a blade tilt angle of 11.3°,a blade rotating speed of 659.3 r/min,and a forward speed of 1.5 km/h,the maximum shear force on the blade is the largest,while the maximum cutting force is the smallest.Finally,based on the simulation results,this paper discussed the internal factors affecting the breakage rate of sugarcane stalks and predicted the damage location and damage force of the stalks by studying the stress wave transmission effect.Additionally,it analyzed the effects of single-knife cutting and multi-cutting on stalk incisions.The results indicated that multi-cutting causes more damage to the stalks and increases the breakage rate of sugarcane.The results of this study can provide a theoretical basis and technical reference for exploring the reduction of sugarcane residual cutting rate.

Application of Modelica Based Multi- Domain Modeling and Simulation for Gravity-1

In the R&D phase of Gravity-1(YL-1), a multi-domain modeling and simulation technology based on Modelica language was introduced, which was a recent attempt in the practice of modeling and simulation method for launch vehicles in China. It realizes a complex coupling model within a unified model for different domains, so that technologists can work on one model. It ensured the success of YL-1 first launch mission, supports rapid iteration, full validation, and tight design collaboration.

Novel Sum-of-Sinusoids Simulation Channel Modeling for 6G Multiple-Input Multiple-Output Vehicle-to-Everything Communications

In this paper,a statistical cluster-based simulation channel model with a finite number of sinusoids is proposed for depicting the multiple-input multiple-output(MIMO)communications in vehicleto-everything(V2X)environments.In the proposed sum-of-sinusoids(SoS)channel model,the waves that emerge from the transmitter undergo line-of-sight(LoS)and non-line-of-sight(NLoS)propagation to the receiver,which makes the model suitable for describing numerous V2X wireless communication scenarios for sixth-generation(6G).We derive expressions for the real and imaginary parts of the complex channel impulse response(CIR),which characterize the physical propagation characteristics of V2X wireless channels.The statistical properties of the real and imaginary parts of the complex CIRs,i.e.,autocorrelation functions(ACFs),Doppler power spectral densities(PSDs),cross-correlation functions(CCFs),and variances of ACFs and CCFs,are derived and discussed.Simulation results are generated and match those predicted by the underlying theory,demonstrating the accuracy of our derivation and analysis.The proposed framework and underlying theory arise as an efficient tool to investigate the statistical properties of 6G MIMO V2X communication systems.

Complex adaptive system theory,agent-based modeling,and simulation in dominant technology formation

Dominant technology formation is the key for the hightech industry to“cross the chasm”and gain an established foothold in the market(and hence disrupt the regime).Therefore,a stimulus-response model is proposed to investigate the dominant technology by exploring its formation process and mechanism.Specifically,based on complex adaptive system theory and the basic stimulus-response model,we use a combination of agent-based modeling and system dynamics modeling to capture the interactions between dominant technology and the socio-technical landscape.The results indicate the following:(i)The dynamic interaction is“stimulus-reaction-selection”,which promotes the dominant technology’s formation.(ii)The dominant technology’s formation can be described as a dynamic process in which the adaptation intensity of technology standards increases continuously until it becomes the leading technology under the dual action of internal and external mechanisms.(iii)The dominant technology’s formation in the high-tech industry is influenced by learning ability,the number of adopting users and adaptability.Therein,a“critical scale”of learning ability exists to promote the formation of leading technology:a large number of adopting users can promote the dominant technology’s formation by influencing the adaptive response of technology standards to the socio-technical landscape and the choice of technology standards by the socio-technical landscape.There is a minimum threshold and a maximum threshold for the role of adaptability in the dominant technology’s formation.(iv)The socio-technical landscape can promote the leading technology’s shaping in the high-tech industry,and different elements have different effects.This study promotes research on the formation mechanism of dominant technology in the high-tech industry,presents new perspectives and methods for researchers,and provides essential enlightenment for managers to formulate technology strategies.

COVID-19 transmission in U.S.transit buses:A scenario-based approach with agent-based simulation modeling(ABSM)

The transit bus environment is considered one of the primary sources of transmission of the COVID-19(SARSCoV-2)virus.Modeling disease transmission in public buses remains a challenge,especially with uncertainties in passenger boarding,alighting,and onboard movements.Although there are initial findings on the effectiveness of some of the mitigation policies(such as face-covering and ventilation),evidence is scarce on how these policies could affect the onboard transmission risk under a realistic bus setting considering different headways,boarding and alighting patterns,and seating capacity control.This study examines the specific policy regimes that transit agencies implemented during early phases of the COVID-19 pandemic in USA,in which it brings crucial insights on combating current and future epidemics.We use an agent-based simulation model(ABSM)based on standard design characteristics for urban buses in USA and two different service frequency settings(10-min and 20-min headways).We find that wearing face-coverings(surgical masks)significantly reduces onboard transmission rates,from no mitigation rates of 85%in higher-frequency buses and 75%in lower-frequency buses to 12.5%.The most effective prevention outcome is the combination of KN-95 masks,open window policies,and half-capacity seating control during higher-frequency bus services,with an outcome of nearly 0%onboard infection rate.Our results advance understanding of COVID-19 risks in the urban bus environment and contribute to effective mitigation policy design,which is crucial to ensuring passenger safety.The findings of this study provide important policy implications for operational adjustment and safety protocols as transit agencies seek to plan for future emergencies.

Modeling of Large-Scale Hydrogen Storage System Considering Capacity Attenuation and Analysis of Its Efficiency Characteristics

In the existing power system with a large-scale hydrogen storage system,there are problems such as low efficiency of electric-hydrogen-electricity conversion and single modeling of the hydrogen storage system.In order to improve the hydrogen utilization rate of hydrogen storage system in the process of participating in the power grid operation,and speed up the process of electric-hydrogen-electricity conversion.This article provides a detailed introduction to the mathematical and electrical models of various components of the hydrogen storage unit,and also establishes a charging and discharging efficiency model that considers the temperature and internal gas partial pressure of the hydrogen storage unit.These models are of great significance for studying and optimizing gas storage technology.Through these models,the performance of gas storage units can be better understood and improved.These studies are very helpful for improving energy storage efficiency and sustainable development.The factors affecting the charge-discharge efficiency of hydrogen storage units are analyzed.By integrating the models of each unit and considering the capacity degradation of the hydrogen storage system,we can construct an efficiency model for a large hydrogen storage system and power conversion system.In addition,the simulation models of the hydrogen production system and hydrogen consumption system were established in MATLAB/Simulink.The accuracy and effectiveness of the simulation model were proved by comparing the output voltage variation curve of the simulation with the polarization curve of the typical hydrogen production system and hydrogen consumption system.The results show that the charge-discharge efficiency of the hydrogen storage unit increases with the increase of operating temperature,and H2 and O2 partial voltage have little influence on the charge-discharge efficiency.In the process of power conversion system converter rectification operation,its efficiency decreases with the increase of temperature,while in the process of inverter operation,power conversion system efficiency increases with the increase of temperature.Combined with the efficiency of each hydrogen storage unit and power conversion system converter,the upper limit of the capacity loss of different hydrogen storage units was set.The optimal charge-discharge efficiency of the hydrogen storage system was obtained by using the Cplex solver at 36.46%and 66.34%.

Facilitated Prediction of Micropollutant Degradation via UV-AOPs in Various Waters by Combining Model Simulation and Portable Measurement

The degradation of micropollutants in water via ultraviolet(UV)-based advanced oxidation processes(AOPs)is strongly dependent on the water matrix.Various reactive radicals(RRs)formed in UV-AOPs have different reaction selectivities toward water matrices and degradation efficiencies for target micropollutants.Hence,process selection and optimization are crucial.This study developed a facilitated prediction method for the photon fluence-based rate constant for micropollutant degradation(K′_(p,MP))in various UV-AOPs by combining model simulation with portable measurement.Portable methods for measuring the scavenging capacities of the principal RRs(RRSCs)involved in UV-AOPs(i.e.,HO^(·),SO_(4)^(·-),and Cl^(·))using a mini-fluidic photoreaction system were proposed.The simulation models consisted of photochemical,quantitative structure–activity relationship,and radical concentration steady-state approximation models.The RRSCs were determined in eight test waters,and a higher RRSC was found to be associated with a more complex water matrix.Then,by taking sulfamethazine,caffeine,and carbamazepine as model micropollutants,the k′_(p,MP) values in various UV-AOPs were predicted and further verified experimentally.A lower k′_(p,MP) was found to be associated with a higher RRSC for a stronger RR competition;for example,k′_(p,MP) values of 130.9 and 332.5 m^(2) einstein^(–1),respectively,were obtained for carbamazepine degradation by UV/H_(2)O_(2) in the raw water(RRSC=9.47×10^(4) s^(-1))and sand-filtered effluent(RRSC=2.87×10^(4) s^(-1))of a drinking water treatment plant.The developed method facilitates process selection and optimization for UV-AOPs,which is essential for increasing the efficiency and cost-effectiveness of water treatment.

Multi-scenario Simulation of the Impact of Land Use Change on the Ecosystem Service Value in the Suzhou-Wuxi-Changzhou Metropolitan Area,China

As the most economically developed metropolitan area in China’s Yangtze River Delta,the rapid changing land use patterns of Suzhou-Wuxi-Changzhou(Su-Xi-Chang) metropolitan area have profound impacts on the ecosystem service value(ESV).Based on the patterns of land use change and the ESV change in Su-Xi-Chang metropolitan area from 2000 to 2020,we set up four scenarios:natural development scenario,urban development scenario,arable land protection scenario and ecological protection scenario,and simulated the impact of land use changes on the ESV in these scenarios.The results showed that:1) the area of built-up land in the Su-XiChang metropolitan area increased significantly from 2000 to 2020,and the area of other types of land decreased.Arable land underwent the highest transfer-out area,and was primarily converted into built-up land.The total ESV of Su-Xi-Chang metropolitan area increased initially then declined from 2000–2020,and the value of almost all individual ecosystem services decreased.2) Population density,GDP per area,night lighting intensity,and road network density can negatively impact the ESV.3) The total ESV loss under the natural development and urban development scenarios was high,and the expansion of the built-up land and the drastic shrinkage of the arable land contributed to the ESV decline under both scenarios.The total ESV under arable land protection and ecological protection scenarios increases,and therefore these scenarios are suitable for future land use optimization in Su-Xi-Chang.This study could provide a certain reference for land use planning and allocation,and offer guidance for the rational allocation of land resources.

Multi-scenario Simulation and Spatial-temporal Analysis of LUCC in China's Coastal Zone Based on Coupled SD-FLUS Model

Increased human activities in China's coastal zone have resulted in the depletion of ecological land resources.Thus,conducting current and future multi-scenario simulation research on land use and land cover change(LUCC)is crucial for guiding the healthy and sustainable development of coastal zones.System dynamic(SD)-future land use simulation(FLUS)model,a coupled simulation model,was developed to analyze land use dynamics in China's coastal zone.This model encompasses five scenarios,namely,SSP1-RCP2.6(A),SSP2-RCP4.5(B),SSP3-RCP4.5(C),SSP4-RCP4.5(D),and SSP5-RCP8.5(E).The SD model simulates land use demand on an annual basis up to the year 2100.Subsequently,the FLUS model determines the spatial distribution of land use for the near term(2035),medium term(2050),and long term(2100).Results reveal a slowing trend in land use changes in China's coastal zone from 2000–2020.Among these changes,the expansion rate of construction land was the highest and exhibited an annual decrease.By 2100,land use predictions exhibit high accuracy,and notable differences are observed in trends across scenarios.In summary,the expansion of production,living,and ecological spaces toward the sea remains prominent.Scenario A emphasizes reduced land resource dependence,benefiting ecological land protection.Scenario B witnesses an intensified expansion of artificial wetlands.Scenario C sees substantial land needs for living and production,while Scenario D shows coastal forest and grassland shrinkage.Lastly,in Scenario E,the conflict between humans and land intensifies.This study presents pertinent recommendations for the future development,utilization,and management of coastal areas in China.The research contributes valuable scientific support for informed,long-term strategic decision making within coastal regions.

Application of Patient Simulators Combined with Internet plus Scenario Simulation Teaching Models on Intravenous Infusion Nursing Education in China

Objective: To explore the effectiveness of applying patient simulators combined with Internet Plus scenario simulation teaching models on intravenous (IV) infusion nursing education, and to provide scientific evidence for the implementation of advanced teaching models in future nursing education. Methods: Enrolled 60 nurses who took the IV infusion therapy training program in our hospital from January 2022 to December 2023 for research. 30 nurses who were trained in traditional teaching models from January to December 2022 were selected as the control group, and 30 nurses who were trained with simulation-based teaching models with methods including simulated patients, internet, online meetings which can be replayed and scenario simulation, etc. from January to December 2023 were selected as the experimental group. Evaluated the learning outcomes based on the Competency Inventory for Nursing Students (CINS), Problem-Solving Inventory (PSI), comprehensive learning ability, scientific research ability, and proficiency in the theoretical knowledge and practical skills of IV infusion therapy. Nursing quality, the incidence of IV infusion therapy complications and nurse satisfaction with different teaching models were also measured. Results: The scientific research ability, PSI scores, CINS scores, and comprehensive learning ability of the experimental group were better than those of the control group (P 0.05), and their assessment results of practical skills, nursing quality of IV infusion therapy during training, and satisfaction with teaching models were all better than those of the control group with statistical significance (P < 0.05). The incidence of IV infusion therapy complications in the experimental group was lower than that in the control group, indicating statistical significance (P < 0.05). Conclusions: Teaching models based on patient simulators combined with Internet Plus scenario simulation enable nursing students to learn more directly and practice at any time and in any place, and can improve their proficiency in IV infusion theoretical knowledge and skills (e.g. PICC catheterization), core competencies, problem-solving ability, comprehensive learning ability, scientific research ability and the ability to deal with complicated cases. Also, it helps provide high-quality nursing education, improve the nursing quality of IV therapy, reduce the incidence of related complications, and ensure the safety of patients with IV therapy.

Integrating AnyLogic Simulation in Emergency Evacuation Management for Enhanced Security

This study introduces an innovative approach by integrating AnyLogic simulation into emergency evacuation strategies to enhance security protocols.The research focuses on leveraging advanced computational models to simulate and optimize evacuation scenarios in various settings,including public venues,residential areas,and urban environments.By integrating real-world data and behavioral models,the simulation accurately represents human movements,decision-making processes,and traffic flow dynamics during evacuation scenarios.The study evaluates the effectiveness of various evacuation strategies,including route planning,crowd behavior,and emergency response coordination,using a scenario-driven approach within the AnyLogic simulation environment.Furthermore,this research contributes to the establishment of optimized emergency response protocols by systematically evaluating and refining evacuation plans.The research frameworks mentioned in the research imply the efficient use of the AnyLogic simulation model to be used in different sectors and fields to enhance the strategies for saving lives and implementing an efficient evacuation management system.

Refinement of Adaptive Dynamical Simulation of Quantum Mechanical Double Slit Interference Phenomenon

We applied adaptive dynamics to double slit interference phenomenon using particle model and obtained partial successful results in our previous report. The patterns qualitatively corresponded well with experiments. Several properties such as concave single slit pattern and large influence of slight displacement of the emission position were different from the experimental results. In this study we tried other slit conditions and obtained consistent patterns with experiments. We do not claim that the adaptive dynamics is the principle of quantum mechanics, but the present results support the probability of adaptive dynamics as the candidate of the basis of quantum mechanics. We discuss the advantages of the adaptive dynamical view for foundations of quantum mechanics.

Prediction of rice productivity in Kandhamal district of Orissa using simulation modeling

Simulation technique has been employed to predict rice yield of Kandhamal plateaus in Orissa(India)using the data of previous years.Preliminary simulation model has been developed The test for uniformity and independence has been conducted using Kolmogrov–smironov test and auto-correlation test,respectively.The result obtained has been subjected to testing of hypothesis by using two sided test.Data for five years(1995 to 2000)are used for model validation and the sample size is increased to 12 years i.e.,from 1995 to 2007 for prediction up to 2012.Sensitivity analysis is conducted by changing the parameters within feasible limits to find out the effect on the model.

UWB Channel Modeling and Simulation with Continuous Frequency Response

Ultra-wideband(UWB)technology is a prospective technology for high-rate transmission and accurate localization in the future communication systems.State-of-art channel modeling approaches usually divide the UWB channel into several sub-band channels and model them independently.By considering frequency-dependent channel parameters,a novel analytical UWB channel model with continuous frequency response is proposed.The composite effect of all frequency components within the UWB channel on the channel impulse response(CIR)of delay domain is derived based on the continuous channel transfer function(CTF)of frequency domain.On this basis,a closed-form simulation model for UWB channels and geometry-based parameter calculation method are developed,which can guarantee the continuity of channel characteristics on the frequency domain and greatly reduce the simulation complexity.Finally,the proposed method is applied to generate UWB channel with 2 GHz bandwidth at sub-6GHz and millimeter wave(mmWave)bands,respectively.The channel measurements are also carried out to validate the proposed method.The simulated CIR and power gain are shown to be in good agreement with the measurement data.Moreover,the comparison results of power gain and Doppler power spectral density(DPSD)show that the proposed UWB channel model Received:Apr.23,2022 Revised:Jun.09,2022 Editor:Wei Fan achieves a good balance between the simulation accuracy and efficiency.

Modeling and simulation for individualized therapy of amisulpride in Chinese patients with schizophrenia:focus on inter interindi⁃vidual variability,therapeutic reference range and laboratory alert level

OBJECTIVE To explain the high inter-individual variability and the frequency of exceeding the therapeutic reference range and the laboratory alert level of amisulpride,a popula⁃tion pharmacokinetic model in Chinese patients with schizophrenia was built based on therapeu⁃tic drug monitoring data to guide individualized therapy.METHODS Plasma concentration data(330 measurements from 121 patients)were ana⁃lyzed using a nonlinear mixed-effects model⁃ing approach with first-order conditional estima⁃tion with interaction(FOCE I).The concentra⁃tions of amisulpride were detected by HPLC-MS/MS.Age,weight,sex,combination medication history and renal function status were evaluated as main covariates.The model was internally val⁃idated using goodness-of-fit,bootstrap and nor⁃malized prediction distribution error.Recom⁃mended dosage regimens for patients with key covariates were estimated on the basis of Monte Carlo simulations and the established model.RESULTS A one-compartment model with first-order absorption and elimination was found to adequately characterize amisulpride concentra⁃tion in Chinese patients with schizophrenia.The population estimates of the apparent volume of distribution(V/F)and apparent clearance(CL/F)were 12.7 L and 1.12 L·h-1,respectively.Age sig⁃nificantly affected the clearance of amisulpride and the final model was as follow:CL/F=1.04×(AGE/32)-0.624(L·h-1).To avoid exceeding the lab⁃oratory alert level(640μg·L-1),the model-based simulation results showed that the recommended dose of amisulpride was no more than 600 mg per day for patients aged 60 years,800 mg per day for those aged 40 years and 1200 mg per day for those aged 20 years,respectively.CON⁃CLUSION Dosage optimization of amisulpride can be carried out according to age to reduce the risk of adverse reactions.The model can be used as a suitable tool for designing individual⁃ized therapy for Chinese patients with schizo⁃phrenia.

Dynamics modeling and simulation of mechanism with joint clearance

The existence of clearance in the joints of mechanisms system is inevitable.The movements of the real mechanism are deflection from the ideal mechanism due to the clearances and the motion accuracy is decreased.The effects of the hinge clearance on the crank and rocker mechanism system are studied.The system dynamics equation with clearance is presented.The contact dynamics model is established using the nonlinear equivalent spring-damp model and the friction effect is considered by using Coulomb friction model.Then the models are incorporated into ADAMS,and based on the model,large numbers numeric simulations are made.The regularity of contact forces in clearance are studied in detail.And the effects of clearance size,clearance friction on the mechanism dynamics characteristic are analyzed.The simulation results can predict the effects of clearance on the mechanism dynamics characteristic preferably.

A Numerical Convex Lens for the State-Discretized Modeling and Simulation of Megawatt Power Electronics Systems as Generalized Hybrid Systems

Modeling and simulation have emerged as an indispensable approach to create numerical experiment platforms and study engineering systems.However,the increasingly complicated systems that engineers face today dramatically challenge state-of-the-art modeling and simulation approaches.Such complicated systems,which are composed of not only continuous states but also discrete events,and which contain complex dynamics across multiple timescales,are defined as generalized hybrid systems(GHSs)in this paper.As a representative GHS,megawatt power electronics(MPE)systems have been largely integrated into the modern power grid,but MPE simulation remains a bottleneck due to its unacceptable time cost and poor convergence.To address this challenge,this paper proposes the numerical convex lens approach to achieve state-discretized modeling and simulation of GHSs.This approach transforms conventional time-discretized passive simulations designed for pure-continuous systems into state-discretized selective simulations designed for GHSs.When this approach was applied to a largescale MPE-based renewable energy system,a 1000-fold increase in simulation speed was achieved,in comparison with existing software.Furthermore,the proposed approach uniquely enables the switching transient simulation of a largescale megawatt system with high accuracy,compared with experimental results,and with no convergence concerns.The numerical convex lens approach leads to the highly efficient simulation of intricate GHSs across multiple timescales,and thus significantly extends engineers’capability to study systems with numerical experiments.

Numerical modeling and simulation of PEM fuel cells: Progress and perspective

This paper provides a comprehensive review on the research and development in multi-scale numerical modeling and simulation of PEM fuel cells. An overview of recent progress in PEM fuel cell modeling has been provided. Fundamental transport phenomena in PEM fuel cells and the corresponding mathematical formulation of macroscale models are analyzed. Various important issues in PEM fuel cell modeling and simulation are examined in detail, including fluid flow and species transport, electron and proton transport, heat transfer and thermal management, liquid water transport and water management, transient response behaviors, and cold-start processes. Key areas for further improvements have also been discussed.