Comparison and Selection of Arch-Rib Construction Schemes for Continuous Beam arch Composite Bridge of High Speed Railway

The paper summarizes the four different construction schemes based on engineering cases for the arch rib construction of continuous beam-arch composite bridges for high-speed railways.These methods include in-situ assembly,segmental lifting,incremental launching and longitudinal moving,and vertical rotation.The temporary structural designs,process methods,and technological equipment for each construction scheme are described in detail.The advantages and disadvantages of each scheme and its application scope under various conditions are analyzed,and opinions and suggestions for guiding the application of each scheme are proposed.The comparison and selection analyses show that the four arch rib construction schemes have certain applicability under different conditions such as bridge site status,bridge span,and construction environment.With the continuous increase of bridge span and progress of construction technological equipment,the arch rib construction technology is developing towards the overall erection direction.This leads to more obvious technical advantages of the segmental lifting method,incremental launching and longitudinal moving method,and vertical rotation method.Therefore,it is necessary to select the best construction scheme according to the construction status and technical conditions during application.

连续钢构柔性拱组合桥梁设计研究

为了研究连续钢构柔性拱组合桥梁的设计,以聊泰黄河特大桥(121.26+236.49+121.26)m连续刚构柔性拱组合桥梁作为工程背景,结合该工程实际情况,对桥梁主梁、拱肋、横撑、吊杆、支座、主墩、承台等结构部件进行设计。通过检算,主梁承载力大于最大受压应力,并且桥梁主梁与拱肋挠度均没有超出规范要求,设计符合相关规范要求。

大跨度连续梁-拱组合结构钢管拱肋安装工艺研究

梁-拱结合结构钢管拱肋部位是大跨度连续梁拱组合桥设计的关键部位,其受力性能对全桥承载能力和跨越能力至关重要。文章结合具体工程实例,阐述了大跨度连续梁-拱组合结构拱肋分段布置方案,对支架抗倾覆稳定性进行了分析,并就大跨度连续梁-拱组合结构G2~G5节段拱肋安装施工技术要点展开了详细的研究,以提高钢管拱肋施工效率,确保桥梁工程整体施工质量,促进桥梁工程事业的长远发展。

单拱肋连续梁-拱组合桥的结构设计

以某市轨道交通6号线花溪湖大桥的施工图设计为基础,介绍单拱肋连续梁-拱组合结构的桥型方案及主桥结构设计,并对该结构体系进行了详细的静力和动力分析。分析结果表明,单拱肋连续梁-拱组合结构具有良好的静力和动力性能,其结构强度、应力、刚度、整体稳定性及动力效应均满足规范要求,是轨道交通桥梁设计中一种合适的桥型。

单肋式梁拱组合体系桥梁结构设计

马涌大桥主桥采用一跨100 m单肋式梁拱组合式结构,桥宽40 m,考虑双向四车道通行并预留双向有轨电车车道。现以该桥的初步设计和施工图设计为基础,介绍单肋式梁拱组合式结构的桥型方案研究、主桥结构设计、结构计算分析等内容,并分析该桥的一些技术特点。该桥的河涌交汇口主桥设计方法、梁拱组合式结构的设计思想、结构受力要点、独特拱肋造型的设计方法等,可供类似桥梁设计时参考。