The surface fracture toughness is an important mechanical parameter for studying the failure behavior of air plasma sprayed(APS)thermal barrier coatings(TBCs).As APS TBCs are typical multilayer porous ceramic material...The surface fracture toughness is an important mechanical parameter for studying the failure behavior of air plasma sprayed(APS)thermal barrier coatings(TBCs).As APS TBCs are typical multilayer porous ceramic materials,the direct applications of the traditional single edge notched beam(SENB)method that ignores those typical structural characters may cause errors.To measure the surface fracture toughness more accurately,the effects of multilayer and porous characters on the fracture toughness of APS TBCs should be considered.In this paper,a modified single edge V-notched beam(MSEVNB)method with typical structural characters is developed.According to the finite element analysis(FEA),the geometry factor of the multilayer structure is recalculated.Owing to the narrower V-notches,a more accurate critical fracture stress is obtained.Based on the Griffith energy balance,the reduction of the crack surface caused by micro-defects is corrected.The MSEVNB method can measure the surface fracture toughness more accurately than the SENB method.展开更多
Limit loads are widely studied and several limit load solutions are proposed to some typical geometry of weldments.However,there are no limit load solutions exist for the single edge crack weldments in tension（SEC（...Limit loads are widely studied and several limit load solutions are proposed to some typical geometry of weldments.However,there are no limit load solutions exist for the single edge crack weldments in tension（SEC（T））,which is also a typical geometry in fracture analysis.The mis-matching limit load for thick plate with SEC（T） are investigated and the special limit load solutions are proposed based on the available mis-matching limit load solutions and systematic finite element analyses.The real weld configurations are simplified as a strip,and different weld strength mis-matching ratio M,crack depth/width ratio a/W and weld width 2H are in consideration.As a result,it is found that there exists excellent agreement between the limit load solutions and the FE results for almost all the mis-matching ration M,a/W and ligament-to-weld width ratio（W-a）/H.Moreover,useful recommendations are given for evaluating the limit loads of the EBW structure with SEC（T）.For the EBW joints with SEC（T）,the mis-matching limit loads can be obtained assuming that the components are wholly made of base metal,when M changing from 1.6 to 0.6.When M decreasing to 0.4,the mis-matching limit loads can be obtained assuming that the components are wholly made of base metal only for large value of（W-a）/H.The recommendations may be useful for evaluating the limit loads of the EBW structures with SEC（T）.The engineering simplifications are given for assessing the limit loads of electron beam welded structure with SEC（T）.展开更多
采用离散元法(Discrete element method,DEM)建立C/C复合板材离散元模型,并对其进行校准。利用DEM的独特优势,能够再现C/C层合板单边切口梁实验中微裂纹生成及扩展现象。DEM模拟与实验结果吻合,验证了此C/C离散元模型的有效性,形象地再...采用离散元法(Discrete element method,DEM)建立C/C复合板材离散元模型,并对其进行校准。利用DEM的独特优势,能够再现C/C层合板单边切口梁实验中微裂纹生成及扩展现象。DEM模拟与实验结果吻合,验证了此C/C离散元模型的有效性,形象地再现了C/C损伤过程,同时表明了用DEM研究更为复杂的复合材料的优势。展开更多
基金Project supported by the National Natural Science Foundation of China(Nos.12172048 and 12027901)the National Science and Technology Major Project of China(Nos.2019-Ⅶ-0007-0147 and 2017-Ⅵ-0020-0093)。
文摘The surface fracture toughness is an important mechanical parameter for studying the failure behavior of air plasma sprayed(APS)thermal barrier coatings(TBCs).As APS TBCs are typical multilayer porous ceramic materials,the direct applications of the traditional single edge notched beam(SENB)method that ignores those typical structural characters may cause errors.To measure the surface fracture toughness more accurately,the effects of multilayer and porous characters on the fracture toughness of APS TBCs should be considered.In this paper,a modified single edge V-notched beam(MSEVNB)method with typical structural characters is developed.According to the finite element analysis(FEA),the geometry factor of the multilayer structure is recalculated.Owing to the narrower V-notches,a more accurate critical fracture stress is obtained.Based on the Griffith energy balance,the reduction of the crack surface caused by micro-defects is corrected.The MSEVNB method can measure the surface fracture toughness more accurately than the SENB method.
基金supported by National Natural Science Foundation of China (Grant No. 50935008)
文摘Limit loads are widely studied and several limit load solutions are proposed to some typical geometry of weldments.However,there are no limit load solutions exist for the single edge crack weldments in tension（SEC（T））,which is also a typical geometry in fracture analysis.The mis-matching limit load for thick plate with SEC（T） are investigated and the special limit load solutions are proposed based on the available mis-matching limit load solutions and systematic finite element analyses.The real weld configurations are simplified as a strip,and different weld strength mis-matching ratio M,crack depth/width ratio a/W and weld width 2H are in consideration.As a result,it is found that there exists excellent agreement between the limit load solutions and the FE results for almost all the mis-matching ration M,a/W and ligament-to-weld width ratio（W-a）/H.Moreover,useful recommendations are given for evaluating the limit loads of the EBW structure with SEC（T）.For the EBW joints with SEC（T）,the mis-matching limit loads can be obtained assuming that the components are wholly made of base metal,when M changing from 1.6 to 0.6.When M decreasing to 0.4,the mis-matching limit loads can be obtained assuming that the components are wholly made of base metal only for large value of（W-a）/H.The recommendations may be useful for evaluating the limit loads of the EBW structures with SEC（T）.The engineering simplifications are given for assessing the limit loads of electron beam welded structure with SEC（T）.
文摘采用离散元法(Discrete element method,DEM)建立C/C复合板材离散元模型,并对其进行校准。利用DEM的独特优势,能够再现C/C层合板单边切口梁实验中微裂纹生成及扩展现象。DEM模拟与实验结果吻合,验证了此C/C离散元模型的有效性,形象地再现了C/C损伤过程,同时表明了用DEM研究更为复杂的复合材料的优势。
