This paper explores and proposes a design solution of an integrated skip cycle mode （SCM） control circuit with a simple structure. The design is simulated and implemented with XD10H-1.0μm modular DIMOS 650 V proces...This paper explores and proposes a design solution of an integrated skip cycle mode （SCM） control circuit with a simple structure. The design is simulated and implemented with XD10H-1.0μm modular DIMOS 650 V process. In order to meet the requirement of a wide temperature range and high yields of products, the schematic extracted from the layout is simulated with five process corners at 27℃ and 90℃. Simulation results demonstrate that the proposed integrated circuit is immune to noise and achieves skipping cycle control when switching mode power supply （SMPS） works with low load or without load.展开更多
The results are presented of an experimental investigation of heat transfer in an air-liquid cooling system for a Switch-Mode Power Supply (SMPS) for TV digital power amplifiers. Since these SMPSs are characterized by...The results are presented of an experimental investigation of heat transfer in an air-liquid cooling system for a Switch-Mode Power Supply (SMPS) for TV digital power amplifiers. Since these SMPSs are characterized by high power and high compactness, thereby making the standard cooling techniques difficult to be used, a new cooling system is developed, using water and air as the cooling media. The active components (MOSFETs) are cooled with a liquid cold-plate, the passive ones (condensers, transformers, coils) with an air flow, in turn cooled by the cold-plate. By inserting the cooling system in an experimental tool where it is possible to control the cooling water, measurements are made of temperature in the significant points of the SMPS. The electric efficiency is also measured. The evaluation of the thermal performance of this cooling system is useful in order to limit its maximum operational temperature. The efficacy of the cooling system is demonstrated;the trends of efficiency and power dissipation are evidenced.展开更多
Voltage and frequency are usually considered and assessed independently in the design and operation of electrical networks. However, these two are linked. Each and every malfunctioning electrical system has an impact ...Voltage and frequency are usually considered and assessed independently in the design and operation of electrical networks. However, these two are linked. Each and every malfunctioning electrical system has an impact on both voltage and frequency. This paper presents the opportunity for monitoring the distributed electrical energy by means of a system that monitors, controls, and provides a breakpoint based on high or low voltage and frequency tripping mechanism that avoids any damage to the load. The designed system comprised a switch mode power supply (SMPS), a direct digital synthesizer (DDS), and PIC16F876A microcontroller techniques for stable voltage and frequency outputs. Proteus design suite version 8.11 software and Benchcope SDS1102CN were used for modeling and simulation. The hardware prototype was implemented at a telecom cell site for data capturing and analysis. Test results showed that the implementation of the prototype provided stable and constant outputs of 222 V/50 Hz and 112 V/60 Hz which constituted 99% and 99.8% efficiency for voltage and frequency performance respectively. The paper also discusses different technologies that can be adopted by the system to mitigate voltage and frequency effects on customer appliances.展开更多
Inertial piezoelectric actuators are widely applied in precision devices with simple structure and accurate movement.However,existing inertial piezoelectric actuators still face the challenges of rollback motion and b...Inertial piezoelectric actuators are widely applied in precision devices with simple structure and accurate movement.However,existing inertial piezoelectric actuators still face the challenges of rollback motion and bulky power supply.In this work,an alternate excitation strategy and a customized small power supply for a bimorph rotary piezoelectric actuator(BRPA)are proposed to solve the problems.The BRPA prototype is designed with a bipedal symmetrical structure,measuring 35 mm in height and 32 mm in diameter,which has a maximum rotation velocity of 0.247 rad/s and a resolution of 0.66μrad.Thanks to the bipedal symmetrical structure,the friction directions between the driving feet and the rotor can be coordinated to suppress the rollback.The rollback ratio is almost zero when the phase difference of the exciting signal is set as 180°.The customized power supply is designed and manufactured,whose size is 58 mm×56 mm×46 mm.It can output signals for the single step mode and the continuous mode,and they are adopted to excite BRPA to achieve a small stroke with one single step and a large stroke with continuous step,respectively.Then,an experimental system for optical fiber alignment is developed based on the BRPA and the customized small power supply,the experiment has verified the practicability of this work in the precision fields,especially in the miniaturized precision systems.展开更多
文摘This paper explores and proposes a design solution of an integrated skip cycle mode （SCM） control circuit with a simple structure. The design is simulated and implemented with XD10H-1.0μm modular DIMOS 650 V process. In order to meet the requirement of a wide temperature range and high yields of products, the schematic extracted from the layout is simulated with five process corners at 27℃ and 90℃. Simulation results demonstrate that the proposed integrated circuit is immune to noise and achieves skipping cycle control when switching mode power supply （SMPS） works with low load or without load.
文摘The results are presented of an experimental investigation of heat transfer in an air-liquid cooling system for a Switch-Mode Power Supply (SMPS) for TV digital power amplifiers. Since these SMPSs are characterized by high power and high compactness, thereby making the standard cooling techniques difficult to be used, a new cooling system is developed, using water and air as the cooling media. The active components (MOSFETs) are cooled with a liquid cold-plate, the passive ones (condensers, transformers, coils) with an air flow, in turn cooled by the cold-plate. By inserting the cooling system in an experimental tool where it is possible to control the cooling water, measurements are made of temperature in the significant points of the SMPS. The electric efficiency is also measured. The evaluation of the thermal performance of this cooling system is useful in order to limit its maximum operational temperature. The efficacy of the cooling system is demonstrated;the trends of efficiency and power dissipation are evidenced.
文摘Voltage and frequency are usually considered and assessed independently in the design and operation of electrical networks. However, these two are linked. Each and every malfunctioning electrical system has an impact on both voltage and frequency. This paper presents the opportunity for monitoring the distributed electrical energy by means of a system that monitors, controls, and provides a breakpoint based on high or low voltage and frequency tripping mechanism that avoids any damage to the load. The designed system comprised a switch mode power supply (SMPS), a direct digital synthesizer (DDS), and PIC16F876A microcontroller techniques for stable voltage and frequency outputs. Proteus design suite version 8.11 software and Benchcope SDS1102CN were used for modeling and simulation. The hardware prototype was implemented at a telecom cell site for data capturing and analysis. Test results showed that the implementation of the prototype provided stable and constant outputs of 222 V/50 Hz and 112 V/60 Hz which constituted 99% and 99.8% efficiency for voltage and frequency performance respectively. The paper also discusses different technologies that can be adopted by the system to mitigate voltage and frequency effects on customer appliances.
基金supported by the National Natural Science Foundation of China(Grant Nos.52105015 and 52225501)the China Postdoctoral Science Foundation(Grant No.2021M690830)the Postdoctoral Science Foundation of Heilongjiang Province,China(Grant No.LBH-Z21018)。
文摘Inertial piezoelectric actuators are widely applied in precision devices with simple structure and accurate movement.However,existing inertial piezoelectric actuators still face the challenges of rollback motion and bulky power supply.In this work,an alternate excitation strategy and a customized small power supply for a bimorph rotary piezoelectric actuator(BRPA)are proposed to solve the problems.The BRPA prototype is designed with a bipedal symmetrical structure,measuring 35 mm in height and 32 mm in diameter,which has a maximum rotation velocity of 0.247 rad/s and a resolution of 0.66μrad.Thanks to the bipedal symmetrical structure,the friction directions between the driving feet and the rotor can be coordinated to suppress the rollback.The rollback ratio is almost zero when the phase difference of the exciting signal is set as 180°.The customized power supply is designed and manufactured,whose size is 58 mm×56 mm×46 mm.It can output signals for the single step mode and the continuous mode,and they are adopted to excite BRPA to achieve a small stroke with one single step and a large stroke with continuous step,respectively.Then,an experimental system for optical fiber alignment is developed based on the BRPA and the customized small power supply,the experiment has verified the practicability of this work in the precision fields,especially in the miniaturized precision systems.
