A Hybrid Optimization Approach of Single Point Incremental Sheet Forming of AISI 316L Stainless Steel Using Grey Relation Analysis Coupled with Principal Component Analysiss

We investigated the parametric optimization on incremental sheet forming of stainless steel using Grey Relational Analysis(GRA) coupled with Principal Component Analysis(PCA). AISI 316L stainless steel sheets were used to develop double wall angle pyramid with aid of tungsten carbide tool. GRA coupled with PCA was used to plan the experiment conditions. Control factors such as Tool Diameter(TD), Step Depth(SD), Bottom Wall Angle(BWA), Feed Rate(FR) and Spindle Speed(SS) on Top Wall Angle(TWA) and Top Wall Angle Surface Roughness(TWASR) have been studied. Wall angle increases with increasing tool diameter due to large contact area between tool and workpiece. As the step depth, feed rate and spindle speed increase,TWASR decreases with increasing tool diameter. As the step depth increasing, the hydrostatic stress is raised causing severe cracks in the deformed surface. Hence it was concluded that the proposed hybrid method was suitable for optimizing the factors and response.

Investigation of Surface Micro Waviness in Single Point Diamond Fly Cutting

Single point diamond fly cutting is widely used in the manufacture of large-aperture ultra-precision optical elements. However,some micro waviness( amplitude about 30 nm,wavelength about 15 mm) along the cutting direction which will decrease the quality of the optical elements can always be found in the processed surface,and the axial vibration of the spindle caused by the cut-in process is speculated as the immediate cause of this waviness. In this paper,the analytical method of dynamic mesh is applied for simulating the dynamic behavior of the vertical spindle. The consequence is then exerted to the fly cutter and the processed surface profile is simulated. The wavelength of the simulation result coincides well with the experimental result which proves the importance of the cut-in process during the single point diamond fly cutting.

Microstructure and M echanical Properties of Magnesium Alloy Sheet by Friction Heating Single Point Incremental Forming

By friction heating single point incremental forming,truncated square pyramid parts with different draw angles of a magnesium alloy AZ31 B were formed at room temperature.Metallurgical,tensile and micro-hardness tests were carried out to obtain the effects of wall angle on microstructure and mechanical properties. The results show that grain in side wall of the formed parts becomes refined significantly. Furthermore,with the increase of draw angle,grain size increases,but strength,hardness and plasticity decrease. In addition, surface roughness tests were performed on the formed surface to determine the influence of speed of forming tool. The results show that surface roughness has a little increase with the increase of tool rotational speed.

Embedded Programmable Single Point Multiple Output Intelligent Data Acquisition and Transmission System

To effectively solve the problems of inconsistent communication protocols in automatic monitoring equipment,and limited data acquisition transmission and monitoring equipment,this paper developed programmable single point multiple output intelligent data acquisition and transmission system. It made an in-depth elaboration of the data acquisition and transmission system from hardware design,software architecture and principle,main functions and technical parameters. Finally,it came up with four innovation points:(i) intelligent(automatic)matching a variety of communication protocols for environmental monitoring equipment,(ii) realizing multi-protocol and multi-target parallel data transmission,(iii) realizing remote dynamic input of control instructions through wired or wireless network,and(iv) supporting configuration(process) simulation of field equipment DCS operating conditions.

Single point and asymmetric incremental forming

This paper presents an update on single point incremental forming （SPIF） of sheet metal since 2005. It includes a description of the process with new information on the maximum forming angle, Фmax, for 5052-H32. An indepth example of the successful design and production of parts is given for industry. This includes discussion on production times and surface roughness with details that will help designers. A general design guide for users of SPIF is provided. It is based upon experience gained in the last decade. In general, materials show a trend of decreasing formability with increasing initial thickness. It is shown that for thicker sheet metal, it is recommended using large spherical tools （12.7 mm or larger）, or a large fiat-ended tool. The fiat-ended tool provides the best combination of good formability and very low surface roughness. For aluminum, galvanized steel and stainless steel, it is recommended using a fiat-ended tool. Advances in multi-pass techniques and information on successful and useful numerical models which predict forming behaviour are included. Finally, there is a discussion on future work needed in SPIF.

Fluctuation Limits of the Single Point Catalytic Super-stable Processes

We prove a fluctuating limit theorem of a sequence of super-stable processes overR with a single point catalyst.The weak convergence of the processes on the space of Schwartz distributions is established.The limiting process is an Ornstein–Uhlenbeck type process solving a Langevin type equation driven by a one-dimensional stable process.

Zero-sequence Current Suppressing Strategy for Dual Three-phase Permanent Magnet Synchronous Machines Connected with Single Neutral Point

Dual three-phase permanent-magnet synchronous machines(DTP-PMSM)connected with a single neutral point provide a loop for zero-sequence current(ZSC).This paper proposes a novel space vector pulse width modulation(SVPWM)strategy to suppress the ZSC.Five vectors are selected as basic voltage vectors in one switching period.The fundamental and harmonic planes and the zero-sequence plane are taken into consideration to synthesis the reference voltage vector.To suppress the ZSC,a non-zero zero-sequence voltage(ZSV)is generated to compensate the third harmonic back-EMF.Rather than triangular carrier modulation,the sawtooth carrier modulation strategy is used to generate asymmetric PWM signals.The modulation range is investigated to explore the variation of modulation range caused by considering the zero-sequence plane.With the proposed method,the ZSC can be considerably reduced.The simulated and experimental results are presented to validate the effectiveness of the proposed modulation strategy.

Microfluidic-based single cell trapping using a combination of stagnation point flow and physical barrier

Single cell trapping in vitro by microfluidic device is an emerging approach for the study of the relationship between single cells and their dynamic biochemical microenvironments. In this paper, a hydrodynamic-based microfluidic device for single cell trapping is designed using a combination of stagnation point flow and physical barrier.The microfluidic device overcomes the weakness of the traditional ones, which have been only based upon either stagnation point flows or physical barriers, and can conveniently load dynamic biochemical signals to the trapped cell. In addition, it can connect with a programmable syringe pump and a microscope to constitute an integrated experimental system.It is experimentally verified that the microfluidic system can trap single cells in vitro even under flow disturbance and conveniently load biochemical signals to the trapped cell. The designed micro-device would provide a simple yet effective experimental platform for further study of the interactions between single cells and their microenvironments.

Point Groups and Single Forms of Quasicrystals with Eightfold and Twelvefold Symmetry

This paper mainly deals with the point groups and single forms of octagonal quasicrystals and the description of one-dimensional quasilattice. The authors present a new sequence for describing the arrangement of quasiperiods in one-dimensional quasilattice. The first ten numbers of quasiperiods of this sequence are 1, 1, 2, 5, 12, 29, 70, 169, 408 and 985. The arrangement of quasiperiods in the first five steps are a, b, ab. babab and babababbabab. Seven p(?)nt groups and nine single forms for the octagonal system have been deduced, They are as follows: Point groups: 8.8m, 82, 8/m, 8/mmm, 8 and 82m; single forms: octagonal prism, dioctagonal prism. octagonal pyramid. dioctagonal pyramid. octagonal dipyramid, dioctagonal dipyramid, octagonal scalenohedron, dioctagonal scalenohedron and octagonal trapezohedron. Besides seven point groups and nine single forms for the dodecahegonal system have also been deduced.

Unscented Kalman filter for a low-cost GNSS/IMU-based mobile mapping application under demanding conditions

For the last two decades,low-cost Global Navigation Satellite System(GNSS)receivers have been used in various applications.These receivers are mini-size,less expensive than geodetic-grade receivers,and in high demand.Irrespective of these outstanding features,low-cost GNSS receivers are potentially poorer hardwares with internal signal processing,resulting in lower quality.They typically come with low-cost GNSS antenna that has lower performance than their counterparts,particularly for multipath mitigation.Therefore,this research evaluated the low-cost GNSS device performance using a high-rate kinematic survey.For this purpose,these receivers were assembled with an Inertial Measurement Unit(IMU)sensor,which actively transmited data on acceleration and orientation rate during the observation.The position and navigation parameter data were obtained from the IMU readings,even without GNSS signals via the U-blox F9R GNSS/IMU device mounted on a vehicle.This research was conducted in an area with demanding conditions,such as an open sky area,an urban environment,and a shopping mall basement,to examine the device’s performance.The data were processed by two approaches:the Single Point Positioning-IMU(SPP/IMU)and the Differential GNSS-IMU(DGNSS/IMU).The Unscented Kalman Filter(UKF)was selected as a filtering algorithm due to its excellent performance in handling nonlinear system models.The result showed that integrating GNSS/IMU in SPP processing mode could increase the accuracy in eastward and northward components up to 68.28%and 66.64%.Integration of DGNSS/IMU increased the accuracy in eastward and northward components to 93.02%and 93.03%compared to the positioning of standalone GNSS.In addition,the positioning accuracy can be improved by reducing the IMU noise using low-pass and high-pass filters.This application could still not gain the expected position accuracy under signal outage conditions.

Dynamic Analysis for the Global Performance of An SPM-Feeder-Cage System Under Waves and Currents

In the present study, the dynamic response of a coupled SPM-feeder-cage system under irregular waves and shear currents is analyzed. A numerical model is developed by using the commercial software Orca Flex. Hydrodynamics coefficients of the vessel are calculated by using a 3D diffraction/radiation panel program. First- and second-order wave forces are included in the calculations. Morison equation is used to compute the drag force on line elements representing the net. Drag coefficients are determined at every time step in the simulation considering the relative normal velocity between the structural elements and the fluid flow. The dynamic response of the coupled system is analyzed for various environments and net materials. The results of the study show the effects of solidity ratio of the net and vertical positions of the cage on the overall dynamic response of the system, confirming the viability of this type of configuration for future development of offshore aquaculture in deep waters.

Investigation of Internal Turret Mooring System for Oil Production Storage Vessels

The internal turret mooring system for oil production storage vessels is a developing type ofoffshore floating production system suitable for deep water and harsh environmental application. In this paper, some achievements in our research work are presented. The description includes: dynamic analysis of mooring system, research on performance of turret assembly, influence of vessel dimensions and hull forms on mooring performance, model tests under combined action of environmental forces in basin, and hull structural strength analysis.

Attention-Based Multi-Scale Prediction Network for Time-Series Data

Time series data is a kind of data accumulated over time,which can describe the change of phenomenon.This kind of data reflects the degree of change of a certain thing or phenomenon.The existing technologies such as LSTM and ARIMA are better than convolutional neural network in time series prediction,but they are not enough to mine the periodicity of data.In this article,we perform periodic analysis on two types of time series data,select time metrics with high periodic characteristics,and propose a multi-scale prediction model based on the attention mechanism for the periodic trend of the data.A loss calculation method for traffic time series characteristics is proposed as well.Multiple experiments have been conducted on actual data sets.The experiments show that the method proposed in this paper has better performance than commonly used traffic prediction methods(ARIMA,LSTM,etc.)and 3%-5%increase on MAPE.

Some Polar Sets for the Generalized Brownian Sheet

Let W^-（t）（t∈R＋^N） be the d-dimensional N-parameter generalized Brownian sheet. We study the polar sets for W^-（t）. It is proved that for any α∈ R^d, P{W^-（t） = α, for some t∈ R〉^N} = {1, if βd 〈 2N ,0 if αd〉 2N and the probability that W^-（t） has k-multiple points is 1 or 0 according as whether 2kN〉d（k-1）β or 2kN 〈 d（k - 1）α. These results contain and extend the results of the Brownian sheet, where R〉^N = （0,＋∞）U,R＋^N = [0,＋∞）^N,0〈 α ≤1and β〉1.

Study of Disconnectable Riser Turret Mooring System Applied in the South China Sea

The present research has been made on the Disconnectable Riser Turret Mooring (DRTM) System which could be used in the oil fields of the South China Sea. The selection of the principal dimensions and their effect on the characteristics of the system have been discussed. By means of a computer program, the synthetical appraisement has been made in the ultimate mooring condition, disconnecting condition and reconnecting condition respectively. Mean-while, a comparison has been made between DRTM system and CALM system. It has been indicated that DRTM is suitable for the South China Sea and has technological and economical preponderance.

Self-Certificating Root:A Root Zone Security Enhancement Mechanism for DNS

As a critical Internet infrastructure,domain name system(DNS)protects the authenticity and integrity of domain resource records with the introduction of security extensions(DNSSEC).DNSSEC builds a single-center and hierarchical resource authentication architecture,which brings management convenience but places the DNS at risk from a single point of failure.When the root key suffers a leak or misconfiguration,top level domain(TLD)authority cannot independently protect the authenticity of TLD data in the root zone.In this paper,we propose self-certificating root,a lightweight security enhancement mechanism of root zone compatible with DNS/DNSSEC protocol.By adding the TLD public key and signature of the glue records to the root zone,this mechanism enables the TLD authority to certify the self-submitted data in the root zone and protects the TLD authority from the risk of root key failure.This mechanism is implemented on an open-source software,namely,Berkeley Internet Name Domain(BIND),and evaluated in terms of performance,compatibility,and effectiveness.Evaluation results show that the proposed mechanism enables the resolver that only supports DNS/DNSSEC to authenticate the root zone TLD data effectively with minimal performance difference.

Bonding Character and Formation Energy of Point Defects of He and Vacancy on (001) Surface of bcc Iron by First Principle Calculations

The structure and energy of He impurities and vacancy on （001） surface of bcc iron are investigated by an ab initio method. Three cases for stabilities of a He atom at the surface are found： some of He atoms at surface atomic layers （SAL） relax into vacuum gap; some of surface He atoms at octahedral interstitial site relax into more stable tetrahedral interstitial site; some of surface He atoms still stay at tetrahedral interstitial site. The un-stability of the He atom at the surface system can be explained by deformation mechanism of charge densities and electronic densities of states. It is found that formation energy of the point defects from the topmost SAL to bulk-like atomic layer increase gradually, for example, the formation energies of a monovacancy at the first five topmost SALs are equal to 0.33, 1.56, 2.04, 2.02 and 2.11 eV, respectively. The magnetic moments of Fe atoms in the surface atomic layers are also calculated.

A new method of deliverability prediction by steady point in gas wells

Calculating the absolute open flow potential timely and investigating production capacity so as to adjust working system of production wells is one of main means to effectively recovery gas reservoirs during intermediate and late development stage.In order to obtain the open flow potential of gas wells accurately,a new method which utilized a single steady point was proposed in this research,which was based on deliverability formula of a gas well in pseudo-steady state flow with pseudo-pressure form.The influence on factor B in binomial productivity equation caused by the changed permeability was taken into consideration.According to the stable production data,reservoir permeability K can be determined by iterative method firstly,and the coefficient A,B in binomial productivity equation can be calculated with the open flow potential subsequently.It illustrated clearly by a practical example that the new method was suitable for gas wells especially when the producing pressure drop is large.Additionally,the error between the open flow potential value and interpretation result from the multi-point test was small,which proved it to be more simple,economic and effective than the common one.

Fully distributed identity-based threshold signatures with identifiable aborts

Identity-based threshold signature(IDTS)is a forceful primitive to protect identity and data privacy,in which parties can collaboratively sign a given message as a signer without reconstructing a signing key.Nevertheless,most IDTS schemes rely on a trusted key generation center(KGC).Recently,some IDTS schemes can achieve escrow-free security against corrupted KGC,but all of them are vulnerable to denial-of-service attacks in the dishonest majority setting,where cheaters may force the protocol to abort without providing any feedback.In this work,we present a fully decentralized IDTS scheme to resist corrupted KGC and denialof-service attacks.To this end,we design threshold protocols to achieve distributed key generation,private key extraction,and signing generation which can withstand the collusion between KGCs and signers,and then we propose an identification mechanism that can detect the identity of cheaters during key generation,private key extraction and signing generation.Finally,we formally prove that the proposed scheme is threshold unforgeability against chosen message attacks.The experimental results show that the computation time of both key generation and signing generation is<1 s,and private key extraction is about 3 s,which is practical in the distributed environment.

Analysis of Galileo signal-in-space range error and positioning performance during 2015-2018

A long-term analysis of signal-in-space range error (SISRE) is presented for all healthy Galileo satellites, and the first pair of full operational capability satellites in wrong elliptical orbits. Both orbit and clock errors for Galileo show an obvious convergence trend over time. The annual statistical analyses show that the average root mean squares (RMSs) of SISRE for the Galileo constellation are 0.58 m (2015), 0.29 m (2016), 0.23 m (2017), and 0.22 m (2018). Currently, the accuracy of the Galileo signal-in-space is superior to that of the global positioning system (GPS) Block IIF (0.35 m). In addition, the orbit error accounts for the majority of Galileo SISRE, while the clock error accounts for approximately one-third of SISRE due to the high stability of the onboard atomic clock. Single point positioning results show that Galileo achieves an accuracy of 2-3 m, which is comparable to that of GPS despite the smaller number of satellites and worse geometry. Interestingly, the vertical accuracy of Galileo, which uses the NeQuick ionospheric model, is higher than that of GPS. Positioning with single frequency E1 and E5 show a higher precision than E5a and E5b signals. Regarding precise point positioning (PPP), the results indicate that a comparable positioning accuracy can be achieved among different stations with the current Galileo constellation. For static PPP, the RMS values of Galileo-only solutions are within 1 cm horizontally, and the vertical RMSs are mostly within 2 cm horizontally. For kinematic PPP, the RMSs of Galileo-only solutions are mostly within 4 cm horizontally and 6 cm vertically.