A Hybrid Optimization Approach of Single Point Incremental Sheet Forming of AISI 316L Stainless Steel Using Grey Relation Analysis Coupled with Principal Component Analysiss

We investigated the parametric optimization on incremental sheet forming of stainless steel using Grey Relational Analysis(GRA) coupled with Principal Component Analysis(PCA). AISI 316L stainless steel sheets were used to develop double wall angle pyramid with aid of tungsten carbide tool. GRA coupled with PCA was used to plan the experiment conditions. Control factors such as Tool Diameter(TD), Step Depth(SD), Bottom Wall Angle(BWA), Feed Rate(FR) and Spindle Speed(SS) on Top Wall Angle(TWA) and Top Wall Angle Surface Roughness(TWASR) have been studied. Wall angle increases with increasing tool diameter due to large contact area between tool and workpiece. As the step depth, feed rate and spindle speed increase,TWASR decreases with increasing tool diameter. As the step depth increasing, the hydrostatic stress is raised causing severe cracks in the deformed surface. Hence it was concluded that the proposed hybrid method was suitable for optimizing the factors and response.

Efficacy comparison of multipoint and single point scanning panretinal laser photocoagulation in non-proliferative diabetic retinopathy treatment

BACKGROUND Non-proliferative diabetic retinopathy(NPDR)poses a significant challenge in diabetes management due to its microvascular changes in the retina.Laser photocoagulation,a conventional therapy,aims to mitigate the risk of progressing to proliferative diabetic retinopathy(PDR).AIM To compare the efficacy and safety of multi-spot vs single-spot scanning panretinal laser photocoagulation in NPDR patients.METHODS Forty-nine NPDR patients(86 eyes)treated between September 2020 and July 2022 were included.They were randomly allocated into single-spot(n=23,40 eyes)and multi-spot(n=26,46 eyes)groups.Treatment outcomes,including bestcorrected visual acuity(BCVA),central macular thickness(CMT),and mean threshold sensitivity,were assessed at predetermined intervals over 12 months.Adverse reactions were also recorded.RESULTS Energy levels did not significantly differ between groups(P>0.05),but the multi-spot group exhibited lower energy density(P<0.05).BCVA and CMT improvements were noted in the multi-spot group at one-month posttreatment(P<0.05).Adverse reaction incidence was similar between groups(P>0.05).CONCLUSION While energy intensity and safety were comparable between modalities,multi-spot scanning demonstrated lower energy density and showed superior short-term improvements in BCVA and CMT for NPDR patients,with reduced laser-induced damage.

Single Point Positioning with Sequential Least-Squares Filter and Estimated Real-Time Stochastic Model

To obtain higher accurate position estimates, the stochastic model is estimated by using residual of observations, hence, the stochastic model describes the noise and bias in measurements more realistically. By using GPS data and broadcast ephemeris, the numerical results indicating the accurate position estimates at sub-meter level are obtainable.

Single exposure passive three-dimensional information reconstruction based on an ordinary imaging system

Existing three-dimensional(3D) imaging technologies have issues such as requiring active illumination, multiple exposures, or coding modulation. We propose a passive single 3D imaging method based on an ordinary imaging system.Using the point spread function of the imaging system to realize the non-coding measurement on the target, the full-focus images and depth information of the 3D target can be extracted from a single two-dimensional(2D) image through the compressed sensing algorithm. Simulation and experiments show that this approach can complete passive 3D imaging based on an ordinary imaging system without any coding operations. This method can achieve millimeter-level vertical resolution under single exposure conditions and has the potential for real-time dynamic 3D imaging. It improves the efficiency of 3D information detection, reduces the complexity of the imaging system, and may be of considerable value to the field of computer vision and other related applications.

Single Point Positioning Using GPS, GLONASS and BeiDou Satellites

This paper introduces the Chinese BeiDou satellite system and its comparison with the actual completed American GPS and the Russian GLONASS systems. The actual BeiDou system consists of 14 satellites covering totally the Asia-Pacific area. A Single Point Positioning (SPP) test has been realised in Changsha, Hunan province, China, to show the advantage of using combined pseudorange solutions from these 3 satellite navigation systems especially in obstructed sites. The test shows that, with an elevation mask angle of 10&#176;, the accuracy is improved by about 20% in horizontal coordinates and nearly 50% in the vertical component using the simultaneous observations of the 3 systems compared to the GPS/GLONASS solution. For the processing with an elevation mask angle of 30°, most of the time less than 4 GPS satellites were available for the GPS-only case and no solution was possible. However, in this difficult situation, the combined GPS/GLONASS/ BeiDou solutions provided an accuracy (rms values) of about 5 m.

Nonlinear Coupled Analysis of a Single Point Mooring System

Coupled effects on a single point mooring(SPM) system subjected to the combined action of wind,waves and current are studied in this paper. Due to the complicatedness of the sea state and the huge size of the vessel,physical experimental study is both time consuming and uneconomical,whereas the numerical study is cost-effective and DNV software provides powerful SESAM software in solving the issues. This paper focuses on the modeling process of the SPM system,catenary equilibrium calculation,static analysis of the vessel in three different scenarios,and dynamic response simulation of the SPM system under environmental excitations. The three scenarios in study are as follows:the SPM is under the combined function of(a) wind,waves and current,(b) wind and waves,(c) current and waves. They are so set that one can compare the contributions of different types of loads in both static and dynamic studies. Numerical study shows that wind and current are the two major factors contributing to the mooring line tension,and surge and sway are the two dominant motions of the moored vessel subjected to environmental excitations.

PET image reconstruction with a system matrix containing point spread function derived from single photon incidence response

A point spread function（PSF） for the blurring component in positron emission tomography（PET） is studied. The PSF matrix is derived from the single photon incidence response function. A statistical iterative reconstruction（IR） method based on the system matrix containing the PSF is developed. More specifically, the gamma photon incidence upon a crystal array is simulated by Monte Carlo（MC） simulation, and then the single photon incidence response functions are calculated. Subsequently, the single photon incidence response functions are used to compute the coincidence blurring factor according to the physical process of PET coincidence detection. Through weighting the ordinary system matrix response by the coincidence blurring factors, the IR system matrix containing the PSF is finally established. By using this system matrix, the image is reconstructed by an ordered subset expectation maximization（OSEM） algorithm. The experimental results show that the proposed system matrix can substantially improve the image radial resolution, contrast,and noise property. Furthermore, the simulated single gamma-ray incidence response function depends only on the crystal configuration, so the method could be extended to any PET scanner with the same detector crystal configuration.

Investigation of Surface Micro Waviness in Single Point Diamond Fly Cutting

Single point diamond fly cutting is widely used in the manufacture of large-aperture ultra-precision optical elements. However,some micro waviness( amplitude about 30 nm,wavelength about 15 mm) along the cutting direction which will decrease the quality of the optical elements can always be found in the processed surface,and the axial vibration of the spindle caused by the cut-in process is speculated as the immediate cause of this waviness. In this paper,the analytical method of dynamic mesh is applied for simulating the dynamic behavior of the vertical spindle. The consequence is then exerted to the fly cutter and the processed surface profile is simulated. The wavelength of the simulation result coincides well with the experimental result which proves the importance of the cut-in process during the single point diamond fly cutting.

Microfluidic-based single cell trapping using a combination of stagnation point flow and physical barrier

Single cell trapping in vitro by microfluidic device is an emerging approach for the study of the relationship between single cells and their dynamic biochemical microenvironments. In this paper, a hydrodynamic-based microfluidic device for single cell trapping is designed using a combination of stagnation point flow and physical barrier.The microfluidic device overcomes the weakness of the traditional ones, which have been only based upon either stagnation point flows or physical barriers, and can conveniently load dynamic biochemical signals to the trapped cell. In addition, it can connect with a programmable syringe pump and a microscope to constitute an integrated experimental system.It is experimentally verified that the microfluidic system can trap single cells in vitro even under flow disturbance and conveniently load biochemical signals to the trapped cell. The designed micro-device would provide a simple yet effective experimental platform for further study of the interactions between single cells and their microenvironments.

Zero-sequence Current Suppressing Strategy for Dual Three-phase Permanent Magnet Synchronous Machines Connected with Single Neutral Point

Dual three-phase permanent-magnet synchronous machines(DTP-PMSM)connected with a single neutral point provide a loop for zero-sequence current(ZSC).This paper proposes a novel space vector pulse width modulation(SVPWM)strategy to suppress the ZSC.Five vectors are selected as basic voltage vectors in one switching period.The fundamental and harmonic planes and the zero-sequence plane are taken into consideration to synthesis the reference voltage vector.To suppress the ZSC,a non-zero zero-sequence voltage(ZSV)is generated to compensate the third harmonic back-EMF.Rather than triangular carrier modulation,the sawtooth carrier modulation strategy is used to generate asymmetric PWM signals.The modulation range is investigated to explore the variation of modulation range caused by considering the zero-sequence plane.With the proposed method,the ZSC can be considerably reduced.The simulated and experimental results are presented to validate the effectiveness of the proposed modulation strategy.

Enhancement of surface wettability via micro-and nanostructures by single point diamond turning

Studies on surface wettability have received tremendous interest due to their potential applications in research and industrial processes. One of the strategies to tune surface wettability is modifying surface topography at micro-and nanoscales. In this research, periodic micro-and nanostructures were patterned on several polymer surfaces by ultra-precision single point diamond turning to investigate the relationships between surface topographies at the micro-and nanoscales and their surface wettability. This research revealed that single-point diamond turning could be used to enhance the wettability of a variety of polymers, including polyvinyl chloride(PVC), polyethylene 1000(PE1000), polypropylene copolymer(PP) and polytetrafluoroethylene(PFTE), which cannot be processed by conventional semiconductor-based manufacturing processes. Materials exhibiting common wettability properties(θ≈ 90°) changed to exhibit "superhydrophobic" behavior(θ > 150°). Compared with the size of the structures, the aspect ratio of the void space between micro-and nanostructures has a strong impact on surface wettability.

The Structure of Background-error Covariance in a Four-dimensional Variational Data Assimilation System:Single-point Experiment

A four dimensional variational data assimilation （4DVar） based on a dimension-reduced projection （DRP-4DVar） has been developed as a hybrid of the 4DVar and Ensemble Kalman filter （EnKF） concepts. Its good flow-dependent features are demonstrated in single-point experiments through comparisons with adjointbased 4DVar and three-dimensional variational data （3DVar） assimilations using the fifth-generation Pennsylvania State University-National Center for Atmospheric Research Mesoscale Model （MM5）. The results reveal that DRP-4DVar can reasonably generate a background error covariance matrix （simply B-matrix） during the assimilation window from an initial estimation using a number of initial condition dependent historical forecast samples. In contrast, flow-dependence in the B-matrix of MM5 4DVar is barely detectable. It is argued that use of diagonal estimation in the B-matrix of the MM5 4DVar method at the initial time leads to this failure. The experiments also show that the increments produced by DRP-4DVar are anisotropic and no longer symmetric with respect to observation location due to the effects of the weather trends captured in its B-matrix. This differs from the MM5 3DVar which does not consider the influence of heterogeneous forcing on the correlation structure of the B-matrix, a condition that is realistic for many situations. Thus, the MM5 3DVar assimilation could only present an isotropic and homogeneous structure in its increments.

Analysis for the Deployment of Single-Point Mooring Buoy System Based on Multi-Body Dynamics Method

Deployment of buoy systems is one of the most important procedures for the operation of buoy system. In the present study, a single-point mooring buoy system which contains surface buoy, cable segments with components, anchor and so on is modeled by applying multi-body dynamics method. The motion equations are developed in discrete node description and fully Cartesian coordinates. Then numerical method is used to solve the ordinary differential equations and dynamics simulations are achieved while anchor is casting from board. The trajectories and velocities of different nodes without current and with current in buoy system are obtained. The transient tension force of each part of the cable is analyzed in the process of deployment. Numerical results indicate that the transient payload increases to a peak value when the anchor is touching the seabed and the maximum tension force will vary with different floating configuration. This work is helpful for design and deployment planning of buoy system.

Microstructure and M echanical Properties of Magnesium Alloy Sheet by Friction Heating Single Point Incremental Forming

By friction heating single point incremental forming,truncated square pyramid parts with different draw angles of a magnesium alloy AZ31 B were formed at room temperature.Metallurgical,tensile and micro-hardness tests were carried out to obtain the effects of wall angle on microstructure and mechanical properties. The results show that grain in side wall of the formed parts becomes refined significantly. Furthermore,with the increase of draw angle,grain size increases,but strength,hardness and plasticity decrease. In addition, surface roughness tests were performed on the formed surface to determine the influence of speed of forming tool. The results show that surface roughness has a little increase with the increase of tool rotational speed.

Cerebral functional imaging of Waiguan (SJ 5) acupoint specificity using single-photon emission computed tomography

The action of needling in acupoint therapy has to first be regulated and integrated by the brain, and then it affects the target organ and manifests its therapeutic effects, which is dependent on the specificity of the acupoints. The authors put forward the hypothesis of the ＂acupoint-related brain＂. Single-photon emission computed tomography was used to explore the activation of brain regions following true needling in true acupoint Waiguan （SJ 5）, sham needling in true acupoint Waiguan, true needling in a sham point, and sham needling in a sham point. The relative specificity of Waiguan in normal persons was analyzed by observing changes in regional cerebral blood flow. Compared with the sham needling in true acupoint group and sham needling in the sham point group, acupuncture at Waiguan can activate brain regions controlling movement. Compared with true needling in the sham point group, acupuncture at Waiguan can also activate brain regions controlling movement. The results suggest that the specificity of needling at an acupoint is related to certain activated cerebral functional regions, which are associated with the clinical application of the acupoint.

Embedded Programmable Single Point Multiple Output Intelligent Data Acquisition and Transmission System

To effectively solve the problems of inconsistent communication protocols in automatic monitoring equipment,and limited data acquisition transmission and monitoring equipment,this paper developed programmable single point multiple output intelligent data acquisition and transmission system. It made an in-depth elaboration of the data acquisition and transmission system from hardware design,software architecture and principle,main functions and technical parameters. Finally,it came up with four innovation points:(i) intelligent(automatic)matching a variety of communication protocols for environmental monitoring equipment,(ii) realizing multi-protocol and multi-target parallel data transmission,(iii) realizing remote dynamic input of control instructions through wired or wireless network,and(iv) supporting configuration(process) simulation of field equipment DCS operating conditions.

FIELD STUDIES OF SINGLE POINT IMPACT ON LIQUEFIABLE SOIL FOUNDATION OF HIGHWAY

A highway in the floodplain of the Abandoned Yellow River in the north of Jiangsu Province is recently remediated to reduce liquefaction potential using the dynamic compaction(DC)method of densification of in-place soils.Firstly,the liquefaction potential of the soil at the project site is analysed according to the code of seismic design.Then the in-situ single point impact tests are performed on the liquefiable soil.Settlement of crater,excess pore pressure,ground heave and lateral deformation under DC impact are measured and analyzed.Subsequently, the standard penetration test(SPT)and cone penetration test(CPT)are used for investigating the compaction effectiveness.At last,the improvement effect of DC is discussed according to the technical specification of dynamic consolidation to ground treatment.The investigation results indicate that the DC technique is an effective way for remediating liquefiable soil in highway engineering practice.

On ionosphere-delay processing methods for single-frequency precise-point positioning

In single-frequency precise-point positioning of a satellite,ionosphere delay is one of the most important factors impacting the accuracy. Because of the instability of the ionosphere and uncertainty of its physical properties, the positioning accuracy is seriously limited when using a precision-limited model for correction. In order to reduce the error, we propose to introduce some ionosphere parameter for real-time ionosphere-delay estimation by applying various mapping functions. Through calculation with data from the IGS（ International GPS Service） tracking station and comparison among results of using several different models and mapping functions, the feasibility and effectiveness of the new method are verified.

Numerical Simulation of Azimuthal Uniformity of Injection Currents in Single-Point-Feed Induction Voltage Adders

In order to investigate the injection current uniformity around the induction cell bores, two fully electromagnetic （EM） models are respectively established for a single-stage induction cell and an induction voltage adder （IVA） with three cells stacked in series, without considering electron emission. By means of these two models, some factors affecting the injection current uni- formity are simulated and analyzed, such as the impedances of adders and loads, cell locations, and feed timing of parallel driving pulses. Simulation results indicate that higher impedances of adder and loads are slightly beneficial to improve injection current uniformity. As the impedances of adder and loads increase from 5 Ω to 30Ω, the asymmetric coefficient of feed currents decreases from 10.3% to 6.6%. The current non-uniformity within the first cell is a little worse than that in other downstream cells. Simulation results also show that the feed timing would greatly affect current waveforms, and consequently cause some distortion in pulse fronts of cell output voltages. For a given driving pulse with duration time of 70-80 ns, the feed timing with a time deviation of less than 20 ns is acceptable for the three-cell IVAs, just causing the rise time of output voltages to increase about 5 ns at most and making the peak voltage decrease by 3.5%.

Common Fixed Point Result of Multivalued and Singlevalued Mappings in Partially Ordered Metric Space

In recent times the fixed point results in partially ordered metric spaces has greatly developed. In this paper we prove common fixed point results for multivalued and singlevalued mappings in partially ordered metric space. Our theorems generalized the theorem in [1] and extends the many more recent results in such spaces.