The dynamic performances of an ultra-precision fly cutting machine tool(UFCMT)has a dramatic impact on the quality of ultra-precision machining.In this study,the dynamic model of an UFCMT was established based on the ...The dynamic performances of an ultra-precision fly cutting machine tool(UFCMT)has a dramatic impact on the quality of ultra-precision machining.In this study,the dynamic model of an UFCMT was established based on the transfer matrix method for multibody systems.In particular,the large-span scale flow field mesh model was created;and the variation in linear and angular stiffness of journal and thrust bearings with respect to film thickness was investigated by adopting the dynamic mesh technique.The dynamic model was proven to be valid by comparing the dynamic characteristics of the machine tool obtained by numerical simulation with the experimental results.In addition,the power spectrum density estimation method was adopted to simulate the statistical ambient vibration excitation by processing the ambient vibration signal measured over a long period of time.Applying it to the dynamic model,the dynamic response of the tool tip under ambient vibration was investigated.The results elucidated that the tool tip response was significantly affected by ambient vibration,and the isolation foundation had a good effect on vibration isolation.展开更多
Using the axial symmetry results of marker and cell (MAC) method as initial value in this paper, two numerical calculating methods are presented for the late wavemaking response induced by explosion in harbour. One of...Using the axial symmetry results of marker and cell (MAC) method as initial value in this paper, two numerical calculating methods are presented for the late wavemaking response induced by explosion in harbour. One of the methods is the superposition method of the vibration mode based on fluid slosh in container. Another one is the joining method of the MAC results with the shallow wave theory calculation in time domain. As a practical example, it is conducted to the numerical calculation about 1000 ton TNT equivalent explosion within touch of water surface. The results show that it can be rationally described with the methods to the wavemaking progress and character. The numerical results are identical with the observed scene on the spot experiment. The methods are simple and applicable in the engineering design.展开更多
In this paper, using the theory of stochastic analysis of the response to earthquake load, a stochastic analysis method of the response of piled platforms to earthquake load has been established. In the method, the st...In this paper, using the theory of stochastic analysis of the response to earthquake load, a stochastic analysis method of the response of piled platforms to earthquake load has been established. In the method, the strong ground motion is considered as three dimensional stationary white noise process and the pile-soil interaction and water-structure interaction are considered. The stochastic response of a typical platform to earthquake load has been computed with this method and the results compared with those obtained with the response spectrum analysis method. The comparison shows that the stochastic analysis method of the response of piled platforms to earthquake load is suitable for this kind of analysis.展开更多
Accidental eccentricity is a non-standard assumption for seismic design of tall buildings. Taking it into consideration requires reanalysis of seismic resistance, which requires either time consuming computation of na...Accidental eccentricity is a non-standard assumption for seismic design of tall buildings. Taking it into consideration requires reanalysis of seismic resistance, which requires either time consuming computation of natural vibration of eccentric structures or finding a static displacement solution by applying an approximated equivalent torsional moment for each eccentric case. This study proposes an alternative modal response spectrum analysis （MRSA） approach to calculate seismic responses with accidental eccentricity. The proposed approach, called the Rayleigh Ritz Projection-MRSA （RRP-MRSA）, is developed based on MRSA and two strategies： （a） a RRf＂ method to obtain a fast calculation of approximate modes of eccentric structures; and （b） an approach to assemble mass matrices of eccentric structures. The efficiency of RRP-MRSA is tested via engineering examples and compared with the standard MRSA （ST-MRSA） and one approximate method, i.e., the equivalent torsional moment hybrid MRSA （ETM-MRSA）. Numerical results show that RRP-MRSA not only achieves almost the same precision as ST-MRSA, and is much better than ETM-MRSA, but is also more economical. Thus, RRP-MRSA can be in place of current accidental eccentricity computations in seismic design.展开更多
文摘The dynamic performances of an ultra-precision fly cutting machine tool(UFCMT)has a dramatic impact on the quality of ultra-precision machining.In this study,the dynamic model of an UFCMT was established based on the transfer matrix method for multibody systems.In particular,the large-span scale flow field mesh model was created;and the variation in linear and angular stiffness of journal and thrust bearings with respect to film thickness was investigated by adopting the dynamic mesh technique.The dynamic model was proven to be valid by comparing the dynamic characteristics of the machine tool obtained by numerical simulation with the experimental results.In addition,the power spectrum density estimation method was adopted to simulate the statistical ambient vibration excitation by processing the ambient vibration signal measured over a long period of time.Applying it to the dynamic model,the dynamic response of the tool tip under ambient vibration was investigated.The results elucidated that the tool tip response was significantly affected by ambient vibration,and the isolation foundation had a good effect on vibration isolation.
基金Subsidized subject financially supported by the National Natural Science Foundation of China
文摘Using the axial symmetry results of marker and cell (MAC) method as initial value in this paper, two numerical calculating methods are presented for the late wavemaking response induced by explosion in harbour. One of the methods is the superposition method of the vibration mode based on fluid slosh in container. Another one is the joining method of the MAC results with the shallow wave theory calculation in time domain. As a practical example, it is conducted to the numerical calculation about 1000 ton TNT equivalent explosion within touch of water surface. The results show that it can be rationally described with the methods to the wavemaking progress and character. The numerical results are identical with the observed scene on the spot experiment. The methods are simple and applicable in the engineering design.
文摘In this paper, using the theory of stochastic analysis of the response to earthquake load, a stochastic analysis method of the response of piled platforms to earthquake load has been established. In the method, the strong ground motion is considered as three dimensional stationary white noise process and the pile-soil interaction and water-structure interaction are considered. The stochastic response of a typical platform to earthquake load has been computed with this method and the results compared with those obtained with the response spectrum analysis method. The comparison shows that the stochastic analysis method of the response of piled platforms to earthquake load is suitable for this kind of analysis.
基金National Natural Science Foundation of China under Grant No.10972005National Basic Research Program of China under Grant No.2007CB714603
文摘Accidental eccentricity is a non-standard assumption for seismic design of tall buildings. Taking it into consideration requires reanalysis of seismic resistance, which requires either time consuming computation of natural vibration of eccentric structures or finding a static displacement solution by applying an approximated equivalent torsional moment for each eccentric case. This study proposes an alternative modal response spectrum analysis （MRSA） approach to calculate seismic responses with accidental eccentricity. The proposed approach, called the Rayleigh Ritz Projection-MRSA （RRP-MRSA）, is developed based on MRSA and two strategies： （a） a RRf＂ method to obtain a fast calculation of approximate modes of eccentric structures; and （b） an approach to assemble mass matrices of eccentric structures. The efficiency of RRP-MRSA is tested via engineering examples and compared with the standard MRSA （ST-MRSA） and one approximate method, i.e., the equivalent torsional moment hybrid MRSA （ETM-MRSA）. Numerical results show that RRP-MRSA not only achieves almost the same precision as ST-MRSA, and is much better than ETM-MRSA, but is also more economical. Thus, RRP-MRSA can be in place of current accidental eccentricity computations in seismic design.
