The proposed scheme is based on Discrete Fourier Transform (DFT) domain processing. The key technology of this scheme is jamming parameters' accurate estimation and jamming reconstruction. Compared with the 't...The proposed scheme is based on Discrete Fourier Transform (DFT) domain processing. The key technology of this scheme is jamming parameters' accurate estimation and jamming reconstruction. Compared with the 'threshold exciser' scheme the proposed scheme can eliminate more jamming energy on the whole frequency band with the minimum loss of useful signal energy. As shown in the research and simulation, the proposed scheme is much better than the 'threshold exciser' scheme, especially in the case of high power jamming whereas the 'threshold exciser' scheme might be invalid.展开更多
A single-frequency retrievable phase modulated multi-tone fiber amplifier is presented in theory and demonstrated in experiment. A multi-tone seed laser generated by a sine wave phase modulated single-frequency laser ...A single-frequency retrievable phase modulated multi-tone fiber amplifier is presented in theory and demonstrated in experiment. A multi-tone seed laser generated by a sine wave phase modulated single-frequency laser is employed for stimulated Brillouin scattering suppression in an all-fiber amplifier. A demodulation signal which is π phase shifted with respect to the modulation signal is used to retrieve the single-frequency laser from the multi-tone laser. In experiment, we first optimize the all-fiber master-oscillator power-amplifier. With this amplifier, we demonstrate a single-frequency retrievable multi-tone laser with 330-W output when driven by the multi-tone seed, while the ultimate output power is only 130 W when driven by the single-frequency laser. Then, we carry out an experiment for retrieving the single-frequency laser from the amplified multi-tone laser. Results indicate that the single-frequency laser can be retrieved with a sideband suppression of more than 20 dB. Retrieving an even higher power single-frequency laser is possible if a high power demodulator is available.展开更多
[Objective] This study aimed to investigate the effect of zearalenone (ZEN) on DNA damage of porcine leydig cells. [Method] Porcine leydig cells cultured in vitro were collected to determine the median lethal dose (LD...[Objective] This study aimed to investigate the effect of zearalenone (ZEN) on DNA damage of porcine leydig cells. [Method] Porcine leydig cells cultured in vitro were collected to determine the median lethal dose (LD50) of ZEN with tetrazolium-based colorimetric assay (MTT assay). Comet assay was carried out to detect the DNA damage of porcine leydig cells exposed to at 0 (negative group), 1, 5, 10, 20, 40 μmol/L of ZEN. [Result] The percentage of cell tail was 16.67%, 34.00%, 40.67%, 52.00% and 64.67% under 0, 1, 5, 10 and 20 μmol/L of ZEN, respectively; the differences between the percentages of cell tail in various experimental groups had extremely significant statistical significance compared with the negative group (P<0.01), showing a significant dose-effect relationship; Tail length in various groups was 57.60±4.78, 57.75±6.25, 78.97±5.83, 100.50±6.94 and 146.83±12.31 μm, respectively; Tail DNA % in various groups was 21.29±2.25%, 22.24±2.43%, 31.21±6.27%, 37.45±4.33% and 60.68±9.83%, respectively; Tail length and Tail DNA % in experimental groups with ZEN concentration above 5 μmol/L showed significant differences (P<0.05) compared with the negative group, which showed an upward trend with the increase of ZEN concentration. [Conclusion] ZEN has genotoxic effect on porcine leydig cells, which can cause DNA damage, with a significant dose-effect relationship.展开更多
The vertical two-dimensional non-hydrostatic pressure models with multiple layers can make prediction more accurate than those obtained by the hydrostatic pres- sure assumption. However, they are time-consuming and un...The vertical two-dimensional non-hydrostatic pressure models with multiple layers can make prediction more accurate than those obtained by the hydrostatic pres- sure assumption. However, they are time-consuming and unstable, which makes them unsuitable for wider application. In this study, an efficient model with a single layer is developed. Decomposing the pressure into the hydrostatic and dynamic components and integrating the x-momentum equation from the bottom to the free surface can yield a horizontal momentum equation, in which the terms relevant to the dynamic pressure are discretized semi-implicitly. The convective terms in the vertical momentum equation are ignored, and the rest of the equation is approximated with the Keller-box scheme. The velocities expressed as the unknown dynamic pressure are substituted into the continuity equation, resulting in a tri-diagonal linear system solved by the Thomas algorithm. The validation of solitary and sinusoidal waves indicates that the present model can provide comparable results to the models with multiple layers but at much lower computation cost.展开更多
A Taylor series expansion(TSE) based design for minimum mean-square error(MMSE) and QR decomposition(QRD) of multi-input and multi-output(MIMO) systems is proposed based on application specific instruction set process...A Taylor series expansion(TSE) based design for minimum mean-square error(MMSE) and QR decomposition(QRD) of multi-input and multi-output(MIMO) systems is proposed based on application specific instruction set processor(ASIP), which uses TSE algorithm instead of resource-consuming reciprocal and reciprocal square root(RSR) operations.The aim is to give a high performance implementation for MMSE and QRD in one programmable platform simultaneously.Furthermore, instruction set architecture(ISA) and the allocation of data paths in single instruction multiple data-very long instruction word(SIMD-VLIW) architecture are provided, offering more data parallelism and instruction parallelism for different dimension matrices and operation types.Meanwhile, multiple level numerical precision can be achieved with flexible table size and expansion order in TSE ISA.The ASIP has been implemented to a 28 nm CMOS process and frequency reaches 800 MHz.Experimental results show that the proposed design provides perfect numerical precision within the fixed bit-width of the ASIP, higher matrix processing rate better than the requirements of 5G system and more rate-area efficiency comparable with ASIC implementations.展开更多
基金the National Natural Science Foundation of China(No.60172029)
文摘The proposed scheme is based on Discrete Fourier Transform (DFT) domain processing. The key technology of this scheme is jamming parameters' accurate estimation and jamming reconstruction. Compared with the 'threshold exciser' scheme the proposed scheme can eliminate more jamming energy on the whole frequency band with the minimum loss of useful signal energy. As shown in the research and simulation, the proposed scheme is much better than the 'threshold exciser' scheme, especially in the case of high power jamming whereas the 'threshold exciser' scheme might be invalid.
基金Project supported by the New Century Excellent Talents in University, Ministry of Education of China and the Scientific Research Project in National University Defense of Technology
文摘A single-frequency retrievable phase modulated multi-tone fiber amplifier is presented in theory and demonstrated in experiment. A multi-tone seed laser generated by a sine wave phase modulated single-frequency laser is employed for stimulated Brillouin scattering suppression in an all-fiber amplifier. A demodulation signal which is π phase shifted with respect to the modulation signal is used to retrieve the single-frequency laser from the multi-tone laser. In experiment, we first optimize the all-fiber master-oscillator power-amplifier. With this amplifier, we demonstrate a single-frequency retrievable multi-tone laser with 330-W output when driven by the multi-tone seed, while the ultimate output power is only 130 W when driven by the single-frequency laser. Then, we carry out an experiment for retrieving the single-frequency laser from the amplified multi-tone laser. Results indicate that the single-frequency laser can be retrieved with a sideband suppression of more than 20 dB. Retrieving an even higher power single-frequency laser is possible if a high power demodulator is available.
文摘[Objective] This study aimed to investigate the effect of zearalenone (ZEN) on DNA damage of porcine leydig cells. [Method] Porcine leydig cells cultured in vitro were collected to determine the median lethal dose (LD50) of ZEN with tetrazolium-based colorimetric assay (MTT assay). Comet assay was carried out to detect the DNA damage of porcine leydig cells exposed to at 0 (negative group), 1, 5, 10, 20, 40 μmol/L of ZEN. [Result] The percentage of cell tail was 16.67%, 34.00%, 40.67%, 52.00% and 64.67% under 0, 1, 5, 10 and 20 μmol/L of ZEN, respectively; the differences between the percentages of cell tail in various experimental groups had extremely significant statistical significance compared with the negative group (P<0.01), showing a significant dose-effect relationship; Tail length in various groups was 57.60±4.78, 57.75±6.25, 78.97±5.83, 100.50±6.94 and 146.83±12.31 μm, respectively; Tail DNA % in various groups was 21.29±2.25%, 22.24±2.43%, 31.21±6.27%, 37.45±4.33% and 60.68±9.83%, respectively; Tail length and Tail DNA % in experimental groups with ZEN concentration above 5 μmol/L showed significant differences (P<0.05) compared with the negative group, which showed an upward trend with the increase of ZEN concentration. [Conclusion] ZEN has genotoxic effect on porcine leydig cells, which can cause DNA damage, with a significant dose-effect relationship.
基金Project supported by the Specialized Research Fund for the Doctoral Program of Higher Education(No. 20110142110064)the Ministry of Water Resources’ Science and Technology Promotion Plan Program (No. TG1316)
文摘The vertical two-dimensional non-hydrostatic pressure models with multiple layers can make prediction more accurate than those obtained by the hydrostatic pres- sure assumption. However, they are time-consuming and unstable, which makes them unsuitable for wider application. In this study, an efficient model with a single layer is developed. Decomposing the pressure into the hydrostatic and dynamic components and integrating the x-momentum equation from the bottom to the free surface can yield a horizontal momentum equation, in which the terms relevant to the dynamic pressure are discretized semi-implicitly. The convective terms in the vertical momentum equation are ignored, and the rest of the equation is approximated with the Keller-box scheme. The velocities expressed as the unknown dynamic pressure are substituted into the continuity equation, resulting in a tri-diagonal linear system solved by the Thomas algorithm. The validation of solitary and sinusoidal waves indicates that the present model can provide comparable results to the models with multiple layers but at much lower computation cost.
基金Supported by the Industrial Internet Innovation and Development Project of Ministry of Industry and Information Technology (No.GHBJ2004)。
文摘A Taylor series expansion(TSE) based design for minimum mean-square error(MMSE) and QR decomposition(QRD) of multi-input and multi-output(MIMO) systems is proposed based on application specific instruction set processor(ASIP), which uses TSE algorithm instead of resource-consuming reciprocal and reciprocal square root(RSR) operations.The aim is to give a high performance implementation for MMSE and QRD in one programmable platform simultaneously.Furthermore, instruction set architecture(ISA) and the allocation of data paths in single instruction multiple data-very long instruction word(SIMD-VLIW) architecture are provided, offering more data parallelism and instruction parallelism for different dimension matrices and operation types.Meanwhile, multiple level numerical precision can be achieved with flexible table size and expansion order in TSE ISA.The ASIP has been implemented to a 28 nm CMOS process and frequency reaches 800 MHz.Experimental results show that the proposed design provides perfect numerical precision within the fixed bit-width of the ASIP, higher matrix processing rate better than the requirements of 5G system and more rate-area efficiency comparable with ASIC implementations.
