SF VECTOR CONTROL SYSTEM WITH TWO SINGLE CHIP MICROPROCESSORS

This paper introduces a SF vector control system of a slip frequency controlled induction mo-tor with simple structure,fair performance and convenient operation.It is realized by two singlechip microprocessors and fed from SPWM-GTR inverter.The whole system is combined by twosubsystems,both of them are 8031 single chip microprocessors.The communication between themis coordinated by the full duplex serial port within the chip and ask-and-answer communicationmanner.The error-corrected means adopted has improved the operation reliability of the system.A series of experimental results on a 3 kW induction motor are given at the end of this paper.

The Temperature Intelligence Control System Based on Single Chip-Microprocessor

The paper introduces a temperature control systembased on AT89C51 single-chip-microprocessor, and discussesthe principle , hardware structure, and software design of thissystem in detail.

The Application of Multitasking Mechanism in Single Chip Computer System

Developed a new program structure using in single chip computer system, which based on multitasking mechanism. Discussed the specific method for realization of the new structure. The applied sample is also provided.

Use of single chip microcomputer in hydraulic digital adaptive control system

Presents a one grade adaptive controller with one reference model which is built according to δ MRACS adaptive control theory and used to control an actual high order hydraulic system, and the whole hardware system used, which includes a AT89C51 single chip microcomputer, 74Ls373 flip latch, 6116 store, eight bit ADC0809, and so on, and the satisfactory results obtained in study on hydraulic control system.

Single-event effects induced by medium-energy protons in 28 nm system-on-chip

Single-event effects(SEEs)induced by mediumenergy protons in a 28 nm system-on-chip(SoC)were investigated at the China Institute of Atomic Energy.An on-chip memory block was irradiated with 90 MeV and 70 MeV protons,respectively.Single-bit upset and multicell upset events were observed,and an uppermost number of nine upset cells were discovered in the 90 MeV proton irradiation test.The results indicate that the SEE sensitivities of the 28 nm SoC to the 90 MeV and 70 MeV protons were similar.Cosmic Ray Effects on Micro-Electronics Monte Carlo simulations were analyzed,and it demonstrates that protons can induce effects in a 28 nm SoC if their energies are greater than 1.4 MeV and that the lowest corresponding linear energy transfer was 0.142 MeV cm^2 mg^-1.The similarities and discrepancies of the SEEs induced by the 90 MeV and 70 MeV protons were analyzed.

Identifying EGFR-Expressed Cells and Detecting EGFR Multi-Mutations at Single-Cell Level by Microfluidic Chip

EGFR mutations companion diagnostics have been proved to be crucial for the efficacy of tyrosine kinase inhibitor targeted cancer therapies. To uncover multiple mutations occurred in minority of EGFR-mutated cells,which may be covered by the noises from majority of unmutated cells, is currently becoming an urgent clinical requirement. Here we present the validation of a microfluidic-chip-based method for detecting EGFR multimutations at single-cell level. By trapping and immunofluorescently imaging single cells in specifically designed silicon microwells, the EGFR-expressed cellswere easily identified. By in situ lysing single cells, the cell lysates of EGFR-expressed cells were retrieved without cross-contamination. Benefited from excluding the noise from cells without EGFR expression, the simple and cost-effective Sanger's sequencing, but not the expensive deep sequencing of the whole cell population, was used to discover multi-mutations. We verified the new method with precisely discovering three most important EGFR drugrelated mutations from a sample in which EGFR-mutated cells only account for a small percentage of whole cell population. The microfluidic chip is capable of discovering not only the existence of specific EGFR multi-mutations,but also other valuable single-cell-level information: on which specific cells the mutations occurred, or whether different mutations coexist on the same cells. This microfluidic chip constitutes a promising method to promote simple and cost-effective Sanger's sequencing to be a routine test before performing targeted cancer therapy.

Gas concentration monitoring system for small and medium-sized coal mines based on gas-sensing detection and single-chip control

这份报纸针对气体在小、中型的煤矿引起的灾难的实际条件。为煤矿监视系统的新煤气的集中根据煤气察觉到的察觉和单个薄片的控制被开发。因为它为易燃、爆炸的气体有好敏感特征，监视系统把锡氧化物用作 N 类型半导体气体传感器的主要材料(例如甲烷，碳一氧化物) 。QM-N5-semiconductor 煤气的传感器被采用在不同煤气的集中下面检测抵抗的产量价值。故意地，系统拿数字薄片抵抗作为处理硬件结构分析并且判定输入的电路的核心珍视的 AT89C51，然后为超出煤气的集中的限制完成控制和警报。监视系统的煤气的集中有许多优点包括在结构，快反应时间，稳定的表演和低费用简单。因此，监视煤气的集中并且在小、中型的煤矿提供早警告能广泛地被用来。

A Single Mode Hybrid Ⅲ-Ⅴ/Silicon On-Chip Laser Based on Flip-Chip Bonding Technology for Optical Interconnection

A single mode hybrid Ⅲ-Ⅴ/silicon on-chip laser based on the flip-chip bonding technology for on-chip optical interconnection is demonstrated. A single mode Fabry-Perot laser structure with micro-structures on an InP ridge waveguide is designed and fabricated on an InP/AIGaInAs multiple quantum well epitaxial layer structure wafer by using i-line lithography. Then, a silicon waveguide platform including a laser mounting stage is designed and fabricated on a silicon-on-insulator substrate. The single mode laser is flip-chip bonded on the laser mounting stage. The lasing light is butt-coupling to the silicon waveguide. The laser power output from a silicon waveguide is 1.3roW, and the threshold is 37mA at room temperature and continuous wave operation.

Development of single-chip fuzzy controller based on FFSI in binary

Length and concise structure of fuzzy logic reasoning program and its real-time reasoning characteris-tic have their effect on the performance of a digital single-chip fuzzy controller. The control effect of a digitalfuzzy controller based on looking up fuzzy control responding table is only relative to the table and not relative tothe fuzzy control rules in the practical control process. Aiming at above problem and having combined fuzzy log-ic reasoning with digital operational characteristics of a single-chip microcomputer, functioning-fuzzy-subset in-ference (FFSI) in binary, in which triangle membership functions of error and error-in-change are all represen-ted in binary and singleton membership functions of control variable is binary too, has been introduced. The cir-cuit principle plans of a single-chip fuzzy controller have been introduced for development of its hardware, andthe primary program structure, fuzzy logic reasoning subroutine, serial communication subroutine with PC andreliability design of the fuzzy controller are all discussed in detail. The control of indoor temperature by a fuzzycontroller has been conducted using a testing-room thermodynamic system. Research results show that the FFSIin binary can exercise a concise fuzzy control in a single-chip fuzzy controller, and the fuzzy controller is there-fore reliable and possesses a high performance-price ratio.

Design and Research of Intelligent Alcohol Detector Based on Single Chip Microcomputer

In order to prevent drunk driving timely and protect personal safety,a kind of vehicle-loaded alcohol concentration detector based on single chip microcomputer control is designed.The detector usesAT89C51 microcontroller as the core,makes use of the gas sensor,A/D converter to detect the alcohol concentration of the breath of the driver,can set different thresholds according to the space of the car model,automatically cut off the ignition circuit for the exceeded threshold,and has the sound and light alarm function,which fundamentally solve the problem of drunk driving.The instrument is compact in size,stable in performance,convenient in installation and debugging,and of practical significance.

Combination of Micro-fluidic Chip with Fluorescence Correlation Spectroscopy for Single Molecule Detection

一种单个分子察觉技术被联合开发作为壁炉隧道 poly (dimethylsiloxane )/glass 微能流动的薄片和荧光关联能谱法(FCS ) 。这个方法成功地被用来在包含荧光黄和玫瑰精绿色 succinimidyl 酉旨的混合决定二个模型部件的比例。

DESIGNOFMULTI┐SLOTANDUNEQUAL┐TEMPERATUREPIDCONTROLLERBASEDONSINGLECHIPMICROCOMPUTER

以一个具体的生产过程为例，介绍以单片机为核心的多段不等温PID控制器的设计。文中讨论了PID算法数学实现的模型及实现该算法的软硬件设计方法。

A Single-Chip UHF RFID Reader Transceiver IC

A single-chip UHF RFID reader transceiver IC has been implemented in 0.18 μm SiGe BiCMOS technology. The chip includes all transceiver blocks as RX/TX RF front-end, RX/TX analog baseband, frequency synthesizer and I2C with fully-compliant China 800/900 MHz RFID draft, ISO/IEC 18000-6C protocol and ETSI 302 208-1 local regulation. The normal mode receiver in the presence of -3 dBm self-jammer achieves -75 dBm 1% PER sensitivity. The linear class-A PA integrated in transmitter has 25 dBm OP1 dB output power for CW. The fully-integrated fractional-N fre-quency synthesizer is designed based on MASH 1-1-1 sigma-delta modulator and 1.8 GHz fundamental frequency LC-VCO for lower in-band and out-of-band phase noise. The measured phase noise is up to -106 dBc/Hz@200 kHz and -131 dBc/Hz@1 MHz offset from center frequency and the integrated RMS jitter from 10 kHz to 10 MHz is less than 1.6 pS. The chip dissipates 330 mA from 3.3 V power supply when transmitting 22.4 dBm CW signal and the PAE of linear PA is up to 26%. The chip die area is 16.8 mm2.

Design of an Automated Sorting System for Apples Based on Single Chip Microcomputer

The grading judgment for apples is related to a variety of factors including,size,shape,color,texture,and scars.Traditional manual sorting methods are time consuming and labor intensive.In addition,the accuracy of the method is easily subjective,not repeatable,error-prone,and affected by the sorting environment.This paper presents a complete and automated grading system for apples.The system uses a single-chip microcomputer as the controller of the system,and a PC as the graphics processing unit.It also includes a conveyor,drive motor,frequency converter for motor control,photoelectric sensors,air compressor,and air jets for ejecting the graded apples.The classification algorithm is implemented by using a convolutional neural network(CNN).In order to eliminate contact damage of apples,the system specifically uses air jets as actuators to eject the graded apples into the corresponding bins.At the same time,in order to ensure that an apple triggers the correct ejecting actuator,this paper designs a jet controller with proper logic.

Design and Implementation of Single Chip WCDMA High Speed Channel Decoder

A memory and driving clock efficient design scheme to achieve WCDMA high-speed channel decoder on a single XILINX’ XVC1000E FPGA chip is presented. Using a modified MAP algorithm, say parallel Sliding Window logarithmic Maximum A Posterior (PSW-log-MAP), the on-chip turbo decoder can decode an information bit by only an average of two clocks per iteration. On the other hand, a high-parallel pipeline Viterbi algorithm is adopted to realize the 256-state convolutional code decoding. The final decoder with an 8×chip-clock (30 72MHz) driving can concurrently process a data rate up to 2 5Mbps of turbo coded sequences and a data rate over 400kbps of convolutional codes. There is no extern memory needed. Test results show that the decoding performance is only 0 2～0 3dB or less lost comparing to float simulation.

Proper In deposition amount for on-demand epitaxy of InAs/GaAs single quantum dots

The test-QD in-situ annealing method could surmount the critical nucleation condition of InAs/GaAs single quantum dots（SQDs） to raise the growth repeatability.Here,through many growth tests on rotating substrates,we develop a proper In deposition amount（θ） for SQD growth,according to the measured critical θ for test QD nucleation（θ;）.The proper ratio θ/θ;,with a large tolerance of the variation of the real substrate temperature(T;),is 0.964-0.971 at the edge and> 0.989 but < 0.996 in the center of a 1/4-piece semi-insulating wafer,and around 0.9709 but < 0.9714 in the center of a 1/4-piece N;wafer as shown in the evolution of QD size and density as θ/θ;varies.Bright SQDs with spectral lines at 905 nm-935 nm nucleate at the edge and correlate with individual 7 nm-8 nm-height QDs in atomic force microscopy,among dense 1 nm-5 nm-height small QDs with a strong spectral profile around 860 nm-880 nm.The higher T;in the center forms diluter,taller and uniform QDs,and very dilute SQDs for a proper θ/θ;:only one 7-nm-height SQD in25 μm;.On a 2-inch（1 inch = 2.54 cm） semi-insulating wafer,by using θ/θ;= 0.961,SQDs nucleate in a circle in 22%of the whole area.More SQDs will form in the broad high-T;region in the center by using a proper θ/θ;.

OBE理念下智慧教室监控系统案例设计

将基于学习产出的教育模式(Outcome Based Education,OBE)引入单片机课程实践教学之中,设计了智慧教室监控系统的教学案例。系统可实现手动控灯和自动控灯、时钟显示、语音播报等功能。在实践中,以目标成果为导向,分功能模块,设计不同难度的学习目标,将虚拟仿真和实物搭建相结合,训练和培养学生基础模块知识、系统分析设计能力、专业素养和人文素养,循序渐进,并将融入思政元素和培养能力贯穿教学全过程,为其他专业课程实践教学提供参考。

基于模糊自适应PID的汽车硅油风扇离合器性能测试系统研究

以汽车硅油风扇离合器为研究对象,结合单片机和传感器技术,开发出性能测试系统.提出模糊自适应PID动态控制算法,设计控制器控制温度,利用速度传感器检测风扇转速,对测试系统进行整体设计,给出了硬件总体设计框图,设计模拟量输入输出电路,并设计对应的软件系统.实验结果表明:测试系统升降温速率最高不超过8.5℃/min,耦合区加温速率约为2.3℃/min,分离区降温速率约为6.6℃/min,系统性能稳定,符合标准.

基于GaAs E/D PHEMT工艺的Ku波段双通道幅相控制多功能芯片

基于GaAs增强/耗尽型赝配高电子迁移率晶体管(E/D PHEMT)工艺设计了一款14~18 GHz的双通道多功能芯片。芯片集成了单刀双掷(SPDT)开关、6 bit数控移相器、4 bit数控衰减器和增益补偿放大器。采用正压控制开关以减小控制位数;优化移相、衰减和放大等电路拓扑结构,以获得良好的幅相特性;采用紧凑布局、双通道对称的版图设计,以实现小尺寸和高性能。测试结果表明,+5 V电压下,接收通道增益大于3 dB,1 dB压缩点输出功率大于8 dBm;发射通道增益大于1 dB,1 dB压缩点输出功率大于2 dBm;64态移相均方根误差小于2.5°,16态衰减均方根误差小于0.3 dB,芯片尺寸为3.90 mm×2.25 mm。该多功能芯片可实现对射频信号幅度和相位的高精度控制,可广泛应用于微波收发模块。

试验液压缸活塞控制器优化开发

针对试验液压缸安装过程中对多点协调加载控制系统的依赖性,提出了一种液压缸活塞控制器研制方法,采用单片机作为处理器核心,实现了液压缸活塞伸缩量的精确控制,且系统响应速度可调。当试验加载点安装空间狭小时,控制器可以提高活塞运行的安全性,在工程中具有可靠的应用价值。