FAST EVALUATION OF THE CHARACTERISTICS OF SINGLE-MODE OPTICAL FIBERS

This paper describes a method for fast engineering evaluation of the transmission characteristicsof single-mode optical fibers.A versatile microcomputer program is presented which can be utilized to ana-lyze mode field characteristics of single-mode fibers with arbitrary refractive index profiles.Our computationshows that the mathematical algorithm and the corresponding programs developeod in this paper are rela-tively simple and accurate enough for the engineenring design of single-mode fibers for optical communica-tion systems.

Interference of selective higher-order modes in optical fibers

The interference of selective higher-order modes in optical fibers is investigated both theoretically and experimentally. It has been demonstrated that by coupling the LP01 mode in a step-index single-mode fiber (SMF) to the LP0m modes in step-index multimode fibers (MMFs) with different parameters, one can selectively generate higher-order modes and construct all-fiber interferometers. The research presented in this paper forms a basis of a new type of fiber devices with potential applications in fiber sensing, optical fiber communications, and optical signal processing.

High resolution angular-displacement sensor based on whispering gallery mode resonance in bent optical fibers

A simple fiber sensor to measure angular displacement with high resolution, which is based on whispering gallery mode （WGM） resonance in bent optical fibers,is proposed. The sensor is composed of a single loop formed by loosely tying a knot using single mode fiber. To measure the transmission spectra, a tunable laser and an optic power meter are connected to the two ends of fi- ber loop, respectively. Significant WGM resonances occur over the investigated wavelength range for all the sensors with different bend radius. The angular-displacement sensitivity is studied in the range from -0. 1°to 0. 1°. The detection limit of 1.49 × 10 ^-7 rad can be achieved for the detecting system with the resolution of lpm. The simple loop-structure fiber sensor has potential application prospect in the field of architecture or bridge building with low detection limit and low cost.

Modulation instabilities in randomly birefringent two-mode optical fibers

Modulation instabilities in the randomly birefringent two-mode optical fibers （RB-TMFs） are analyzed in detail by accounting the effects of the differential mode group delay （DMGD） and group velocity dispersion （GVD） ratio between the two modes, both of which are absent in the randomly birefringent single-mode optical fibers （RB-SMFs）. New MI characteristics are found in both normal and anomalous dispersion regimes. For the normal dispersion, without DMGD, no MI exists. With DMGD, a completely new MI band is generated as long as the total power is smaller than a critical total power value, named by Per, which increases significantly with the increment of DMGD, and reduces dramatically as GVD ratio and power ratio between the two modes increases. For the anomalous dispersion, there is one MI band without DMGD. In the presence of DMGD, the MI gain is reduced generally. On the other hand, there also exists a critical total power （Per）, which increases （decreases） distinctly with the increment of DMGD （GVD ratio of the two modes） but varies complicatedly with the power ratio between the two modes. Two MI bands are present for total power smaller than Per, and the dominant band can be switched between the low and high frequency bands by adjusting the power ratio between the two modes. The M1 analysis in this paper is verified by numerical simulation.

Influence of Refractive Index Distribution on Brillouin Gain Spectrum in GeO_(2)-Doped Optical Fibers

GeO_(2) is commonly used as dopant to adjust the refractive index profile(RIP)and the acoustic velocity profile(AVP)in the fiber,thereby forming different Brillouin gain spectrum(BGS)characteristics such as Brillouin gain,acoustic mode number and peak intensity difference.When an optical fiber is used in optical fiber sensing or communication system,its BGS characteristics may play an important role in determining the performance of the system.In this paper,finite element analysis(FEA)method is used to study the influence of refractive index distribution and its corresponding AVP on the BGS in step-index,graded-index,and complex-index optical fibers.A new method has also been proposed to efficiently discriminate acoustic mode solution and obtain the new and full images of total Brillouin gain and acoustic modes number of the fiber as a function of the refractive index distribution,considering the influence of changing the refractive index difference and the geometric size simultaneously.For each type of optical fiber,the recommended parameter range is provided for optical fiber sensing and optical fiber communication.Moreover,the suitable optical fiber with close peak intensity in its multi-peak BGS is explored and achieved,which can be used in Brillouin beat spectrum detection systems to improve sensing accuracy.

RESEARCH ON TRANSVERSE STRESS CHARACTER OF SINGLE MODE OPTICAL FIBER

This paperdetails experimental work done to quantify stress measurements made optically utilizing ordinary single mode optical fibers. Strain-induced changes of birefringence for ordinary single mode optical fiber responses are characterized against standard stress measurements in a well understand configuration. The experimental scheme for this work and the results are presented in detaial. In this paper, POssible applications for this transverse stress character of single mode fibers are also proposed.

Wideband All-Polarization-Maintaining Yb-Doped Mode-Locked Fiber Laser Using a Nonlinear Optical Loop Mirror

We report on a wide-band and stable mode-locked all-polarization-maintaining fiber laser configuration using a nonlinear optical loop mirror. The central wavelength of the laser is 1080.14nm and the 3dB bandwidth is 20.29nm. The repetition rate of the pulse is 3.28 MHz and the pulse width is 848ps. By tuning the pump power, which is centered at 980nrn, from 300mW to 380mW, we obtain a linearly changed output power from 6row to 7.12roW. The all-polarization-mMntaining fiber configuration is fundamental to the stability of the output power.

Properties of Single Mode Polymer Optical Fiber

The density,dynamic modulus,Youngs modulus,tensile strength,extension properties,Fourier transform infrared spectrum and differential scanning calorimetry have been measured and discussed for single mode polymethyl-methacrylate optical fiber.The results show that the fiber can provide large strain range for polymeric optical fiber Bragg gratings.

Multimode Optical Fiber Displacement Sensor

The structure of an intensity modulation optical fiber sensor is introduced. The principle of the sensor which can detect minor displacement by use of minor curve in dark ground is described. Complex experiment shows that the multimode optical fiber not only has the abilitly of detecting the displacement of less than 0.1 nm, but also exhibits characteristics of wide dynamic range and good linearety.

New Passenger Services in Railway Stations Based on Mode Group Diversity Multiplexing Optical Fiber Communications

Nowadays, because of its wide bandwidth and high communication capability, the optical fiber is more and more used for high data rate transmission of information in railway environments. Conventionally, only one service is sent over the fiber at a time. However, many different services can be simultaneously conveyed in railway stations such as passenger information service, cellular phone, Wi-Fi... The objective of the work proposed in this paper is to demonstrate the potential benefits of transmitting radio signals over fiber in a railway environment. The main idea is to exploit the full capacity of the fiber by transmitting multiple services using the same fiber. Since, different services are operating in different frequency bands; we propose a new multiplexing technique called Mode Group Diversity Multiplexing （MGDM） to ensure the transmission of multiple services using the same fiber, without additional infrastructure. There are numerous advantages of the proposed technique, e.g., faster and reliable data exchange, high resolution video surveillance capability, high data rate information exchange in railway stations. We present, in this paper, the physical characteristics of optical fibers, performance of MGDM multiplexing technique, and the influence of the laser excitation conditions at the entrance of the fiber on the performances of the system.

Fiber optical parametric oscillator based on photonic crystal fiber pumped with all-normal-dispersion mode-locked Yb:fiber laser

We demonstrate a cost effective, linearly tunable fiber optical parametric oscillator based on a home-made photonic crystal fiber pumped with a mode-locked ytterbium-doped fiber laser, providing linely tuning ranges from 1018 nm to 1038 nm for the idler wavelength and from 1097 nm to 1117 nm for the signal wavelength by tuning the pump wavelength and the cavity length. In order to obtain the desired fiber with a zero dispersion wavelength around 1060 rim, eight sam- ples of photonic crystal fibers with gradually changed structural parameters are fabricated for the reason that it is difficult to accurately customize the structural dimensions during fabrication. We verify the usability of the fabricated fiber experimen- tally via optical parametric generation and conclude a successful procedure of design, fabirication, and verification. A seed source of home-made all-normal-dispersion mode-locked ytterbium-doped fiber laser with 38.57 ps pulsewidth around the 1064 nm wavelength is used to pump the fiber optical parametric oscillator. The wide picosecond pulse pump laser enables a larger walk-off tolerance between the pump light and the oscillating light as well as a longer photonic crystal fiber of 20 m superior to the femtosecond pulse lasers, resulting in a larger parametric amplification and a lower threshold pump power of 15.8 dBm of the fiber optical parametric oscillator.

Modeling of Few-Mode Multi-Core Optical Fiber Channel Based on Non-Uniform Mode Field Distribution

In this paper, the influencing factors that affect few-mode and multi core optical fiber channel are analyzed in a comprehensive way. The theoretical modeling and computer simulation of the information channel are carried out and then the modeling scheme of few-mode multicore optical fiber channel based on non-uniform mode field distribution is put forward. The proposed modeling scheme can not only exponentially increases the system capacity through fewmode multi-core optical fiber channel, but has better transmission performance compared to the channel of the same type to the uniform channel revealing from the simulation results.

Real-Time 4-Mode MDM Transmission Using Commercial 400G OTN Transceivers and All-Fiber Mode Multiplexers

Weakly-coupled mode division multiplexing(MDM)technique is considered a promising candidate to enhance the capacity of an optical transmission system,in which mode multiplexers/demultiplexers(MMUX/MDEMUX)with low insertion loss and modal crosstalk are the key components.In this paper,a low-modal-crosstalk 4-mode MMUX/MDEMUX for the weakly-coupled triple-ring-core few-mode fiber(TRC-FMF)is designed and fabricated with side-polishing processing.The measurement results show that a pair of MMUX/MDEMUX and 25 km weakly-coupled TRC-FMF MDM link achieve low modal crosstalk of lower than−17.5 dB and insertion loss of lower than 11.56 dB for all the four modes.Based on the TRC-FMF and all-fiber MMUX/MDEMUX,an experiment for 25 km real-time 4-mode 3-λwavelength division multiplexing(WDM)-MDM transmission is conducted using commercial 400G optical transport network(OTN)transceivers.The experimental results prove weakly-coupled MDM techniques facilitate a smooth upgrade of the optical transmission system.

Spatial Mode-Division Multiplexing for High-Speed Optical Coherent Detection Systems

Spatial modedivision multiplexing is emerging as a potential solution to further increasing optical fiber capacity and spectral efficiency. We report a dualmode, dualpolarization transmission method based on modeselective excitation and detection over a twomode fiber. In particular, we present 107 Gbit/s coherent optical OFDM （COOFDM） transmission over a 4.5 km twomode fiber using LP and LP. modes in which mode separation is performed optically.

DISTRIBUTED OPTIC－FIBER FORCE SENSOR BASED ON MODE COUPLING EFFECTS IN HIGH－BIREFRINGENT FIBER

An optic-fiber sensor system for measuring distributed forces is presented. The sensor system chooses high-birefringent fiber as sensing e-iement. Based on coupling effects of polarization modes in high-birefringent fiber, the distribution of the force points along the sensing fiber can be measured by detecting mode couplings in the fiber which are caused by external force disturbance. The location and magnitude of the measured forces are determined by a heterodyne interferometry and the technique of optic path scanning. The spatial resolution of the sensor system is better than 0. 15m for a 50m testing fiber.

Convention of Optical Vortices in Two-Helix Long-Period Fiber Gratings

An effective method to fabricate two-helix long-period fiber gratings （TH-LFGs） is presented. Based on the coupling mode theory, the conversion of optical vortices （OVs） in TH-LFGs are analyzed in detail. The conversions of OVs with different topological charges： 0 → ±2 and 1 → 3 are simulated as three examples and the conversion efficiency higher than 98% can be realized.

Frequency-stabilized Yb：fiber comb with a tapered single-mode fiber

We demonstrate a stable Yb：fiber frequency comb with supercontinuum generation by using a specially designed tapered single-mode fiber, in which a spectrum spanning from 500 nm to 1500 nm is produced. The carrier-envelope offset signal of the Yb：fiber comb is measured with a signal-to-noise ratio of more than 40 dB and a linewidth narrower than 120 kHz. The repetition rate and carrier-envelope offset signals are simultaneously phase locked to a microwave reference frequency.

HG-LG Mode Conversion with Stressed 3-Mode Fibers under Polarization

We have coupled an upright HG mode into a fiber-optic waveguide and used the application of stress to generate a Laguerre-Gaussian laser mode. We have generalized previous results by McGloin et al. by using a polarized input beam, a true 3-mode fiber and by applying the stress on a stripped piece of the optical waveguide. These generalizations are necessary in order to perform quantum information experiments and obtain reliable information on the stress imposed on the optical fiber.

Coupling Character of Polarization Maintaining Optical Fiber Under the Condition of Bend

In the field of optical fiber communication and sensing,polarization maintaining optical fiber with special polarization wave transmit character has been taken more and more attentions.It is more important of couple between polarization modes,with the help of microdisturbed and coupled mode theories,the coupled characters of high birefracting Bow-Tie optical fiber in the condition of pure bend are analysed,and power coupling relationships between transmit modes are also derivated.

Design of Photonic Crystal Fiber Capable of Carrying Multiple Orbital Angular Momentum Modes Transmission

For the traditional photonic crystal fibers with circular air holes, rectangular air holes are added to the fiber cladding. The periodic arrangement of the inner rectangular air holes allows the fiber structure to better match the annular mode field distribution of the vortex beam. The fiber structure was analyzed and calculated by COMSOL Multiphysics 5.4 finite element software, and the characteristics of fiber were analyzed, such as the dispersion, confinement loss, effective mode area and nonlinear coefficient. The results reveal that the photonic crystal fiber structure capable of carrying 50 orbital angular momentum (OAM) modes at the wavelength of 1.15 to 2.0 μm (850 nm). The effective refractive index difference Δneff between vector modes can reach 1 × 10-3, and larger difference can effectively separate the vector modes and improve the transmission performance of OAM modes. Moreover, the fiber has good performance, such as flat dispersion distribution of the low-order modes, low confinement loss below 10-9 dB·m-1, large effective mode field area and small nonlinear coefficient in the 850 nm wavelength range. Therefore, this fiber structure can be applied to the high-capacity communication system of fiber multiplexing OAM. In addition, the good characteristics of this fiber structure are of great significance for the transmission of vortex beam in fiber.