Channel avulsion is a natural phenomenon that occurs abruptly on alluvial river deltas,which can affect the channel stability.The causes for avulsion could be generally categorized as topography-and flood-driven facto...Channel avulsion is a natural phenomenon that occurs abruptly on alluvial river deltas,which can affect the channel stability.The causes for avulsion could be generally categorized as topography-and flood-driven factors.However,previous studies on avulsion thresholds usually focused on topography-driven factors due to the centurial or millennial avulsion timescales of the world’s most deltas,but neglected the impacts of flood-driven factors.In the current study,a novel demarcation equation including the two driven factors was proposed,with the decadal timescale of avulsion being considered in the Yellow River Estuary(YRE).In order to quantify the contributions of different factors in each category,an entropy-based methodology was used to calculate the contributing weights of these factors.The factor with the highest weight in each category was then used to construct the demarcation equation,based on avulsion datasets associated with the YRE.An avulsion threshold was deduced according to the demarcation equation.This avulsion threshold was then applied to conduct the risk assessment of avulsion in the YRE.The results show that:two dominant factors cover respectively geomorphic coefficient representing the topography-driven factor and fluvial erosion intensity representing the flood-driven factor,which were thus employed to define a two dimensional mathematical space in which the demarcation equation can be obtained;the avulsion threshold derived from the equation was also applied in the risk assessment of avulsion;and the avulsion threshold proposed in this study is more accurate,as compared with the existing thresholds.展开更多
This paper analyzes the characteristics of the output gradient histogram and shortages of several traditional automatic threshold methods in order to segment the gradient image better. Then an improved double-threshol...This paper analyzes the characteristics of the output gradient histogram and shortages of several traditional automatic threshold methods in order to segment the gradient image better. Then an improved double-threshold method is proposed, which is combined with the method of maximum classes variance, estimating-area method and double-threshold method. This method can automatically select two different thresholds to segment gradient images. The computer simulation is performed on the traditional methods and this algorithm and proves that this method can get satisfying result. Key words gradient histogram image - threshold selection - double-threshold method - maximum classes variance method CLC number TP 391. 41 Foundation item: Supported by the National Nature Science Foundation of China (50099620) and the Project of Chenguang Plan in Wuhan (985003062)Biography: YANG Shen (1977-), female, Ph. D. candidate, research direction: multimedia information processing and network technology.展开更多
During the microstructural analysis of weakly cemented sandstone,the granule components and ductile structural parts of the sandstone are typically generalized.Considering the contact between granules in the microstru...During the microstructural analysis of weakly cemented sandstone,the granule components and ductile structural parts of the sandstone are typically generalized.Considering the contact between granules in the microstructure of weakly cemented sandstone,three basic units can be determined:regular tetrahedra,regular hexahedra,and regular octahedra.Renormalization group models with granule-and pore-centered weakly cemented sandstone were established,and,according to the renormalization group transformation rule,the critical stress threshold of damage was calculated.The results show that the renormalization model using regular octahedra as the basic units has the highest critical stress threshold.The threshold obtained by iterative calculations of the granule-centered model is smaller than that obtained by the pore-centered model.The granule-centered calculation provides the lower limit(18.12%),and the pore-centered model provides the upper limit(36.36%).Within this range,the weakly cemented sandstone is in a phase-like critical state.That is,the state of granule aggregation transforms from continuous to discrete.In the relative stress range of 18.12%-36.36%,the weakly cemented sandstone exhibits an increased proportion of high-frequency signals(by 83.3%)and a decreased proportion of low-frequency signals(by 23.6%).The renormalization calculation results for weakly cemented sandstone explain the high-low frequency conversion of acoustic emission signals during loading.The research reported in this paper has important significance for elucidating the damage mechanism of weakly cemented sandstone.展开更多
The purpose of this study is to apply different thresholding in mammogram images, and then we will determine which technique is the best in thresholding (extraction) malignant and benign tumors from the rest breast ti...The purpose of this study is to apply different thresholding in mammogram images, and then we will determine which technique is the best in thresholding (extraction) malignant and benign tumors from the rest breast tissues. The used technique is Otsu method, because it is one of the most effective methods for most real world views with regard to uniformity and shape measures. Also, we present all the thresholding methods that used the concept of between class variance. We found from the experimental results that all the used thresholding techniques work well in detection normal breast tissues. But in abnormal tissues (breast tumors), we found that only neighborhood valley emphasis method gave best detection of malignant tumors. Also, the results demonstrate that variance and intensity contrast technique is the best in extraction the micro calcifications which represent the first signs of breast cancer.展开更多
As an important model for explaining the seismic rupture mode,the asperity model plays an important role in studying the stress accumulation of faults and the location of earthquake initiation.Taking Qilian-Haiyuan fa...As an important model for explaining the seismic rupture mode,the asperity model plays an important role in studying the stress accumulation of faults and the location of earthquake initiation.Taking Qilian-Haiyuan fault as an example,this paper combines geodetic method and b-value method to propose a multi-source observation data fusion detection method that accurately determines the asperity boundary named dual threshold search method.The method is based on the criterion that the b-value asperity boundary should be most consistent with the slip deficit rate asperity boundary.Then the optimal threshold combination of slip deficit rate and b-value is obtained through threshold search,which can be used to determine the boundary of the asperity.Based on this method,the study finds that there are four potential asperities on the Qilian-Haiyuan fault:two asperities(A1 and A2)are on the Tuolaishan segment and the other two asperities(B and C)are on Lenglongling segment and Jinqianghe segment,respectively.Among them,the lengths of asperities A1 and A2 on Tuolaishan segment are 17.0 km and 64.8 km,respectively.And the lower boundaries are 5.5 km and 15.5 km,respectively;The length of asperity B on Lenglongling segment is 70.7 km,and the lower boundary is 10.2 km.The length of asperity C on Jinqianghe segment is 42.3 km,and the lower boundary is 8.3 km.展开更多
To overcome the shortcoming that the traditional minimum error threshold method can obtain satisfactory image segmentation results only when the object and background of the image strictly obey a certain type of proba...To overcome the shortcoming that the traditional minimum error threshold method can obtain satisfactory image segmentation results only when the object and background of the image strictly obey a certain type of probability distribution,one proposes the regularized minimum error threshold method and treats the traditional minimum error threshold method as its special case.Then one constructs the discrete probability distribution by using the separation between segmentation threshold and the average gray-scale values of the object and background of the image so as to compute the information energy of the probability distribution.The impact of the regularized parameter selection on the optimal segmentation threshold of the regularized minimum error threshold method is investigated.To verify the effectiveness of the proposed regularized minimum error threshold method,one selects typical grey-scale images and performs segmentation tests.The segmentation results obtained by the regularized minimum error threshold method are compared with those obtained with the traditional minimum error threshold method.The segmentation results and their analysis show that the regularized minimum error threshold method is feasible and produces more satisfactory segmentation results than the minimum error threshold method.It does not exert much impact on object acquisition in case of the addition of a certain noise to an image.Therefore,the method can meet the requirements for extracting a real object in the noisy environment.展开更多
The research of land use and land cover (LUCC) is an important aspect in the global change research. The goal of this study is to find methods of extraction of LUCC’s change outlined and change type from remotely sen...The research of land use and land cover (LUCC) is an important aspect in the global change research. The goal of this study is to find methods of extraction of LUCC’s change outlined and change type from remotely sensed data. Take the country of Fengxian in Shanghai as an example, it was supposed two steps to finish extraction of LUCC information: the first step was to use different methods, which is used to outline change areas; the second step include methods of false composing of two-temporal and threshold value. Through combining two methods, a model rule is built and the LUCC product is obtained, four kinds of change type within the study area are given, and the results are obvious. Finally, the results support the application of the high resolution image and tasseled cap composition (greenness and wetness) in the specific regional too.展开更多
Background Ultrasonic tactile representation utilizes focused ultrasound to create tactile sensations on the bare skin of a user's hand that is not in contact with a device.This study is a preliminary investigatio...Background Ultrasonic tactile representation utilizes focused ultrasound to create tactile sensations on the bare skin of a user's hand that is not in contact with a device.This study is a preliminary investigation on whether different ultrasonic haptic rendering methods have an impact on the perceptual threshold.Methods This study conducted experiments with the adaptive step method to obtain participants'perceptual thresholds.We examine(1)whether different parts on the palm of the hand have different perceptual thresholds;(2)whether the perceptual threshold is different when the ultrasonic focus point is stationary and when it moves in different trajectories;(3)whether different moving speeds of the ultrasonic focus point have an influence on the perceptual threshold;and(4)whether the addition of a DC offset to the modulating wave has an impact on the perceptual threshold.Results The results show that the center of the palm is more sensitive to ultrasonic haptics than the fingertip;compared with a fast-moving focus point,the palm is more sensitive to a stationary and slow-moving focus point.When the modulating wave has a DC offset,the palm is sensitive to a much smaller modulation amplitude.Conclusion For the future ultrasonic tactile representation systems,dynamic adjustment of intensity is required to compensate the difference in perceptual thresholds under different rendering methods to achieve more realistic ultrasonic haptics.展开更多
基金financially supported by the National Key Research and Development Program of China(Grant No.2023YFC3200026)the National Natural Science Foundation of China(Grant No.U2243238)。
文摘Channel avulsion is a natural phenomenon that occurs abruptly on alluvial river deltas,which can affect the channel stability.The causes for avulsion could be generally categorized as topography-and flood-driven factors.However,previous studies on avulsion thresholds usually focused on topography-driven factors due to the centurial or millennial avulsion timescales of the world’s most deltas,but neglected the impacts of flood-driven factors.In the current study,a novel demarcation equation including the two driven factors was proposed,with the decadal timescale of avulsion being considered in the Yellow River Estuary(YRE).In order to quantify the contributions of different factors in each category,an entropy-based methodology was used to calculate the contributing weights of these factors.The factor with the highest weight in each category was then used to construct the demarcation equation,based on avulsion datasets associated with the YRE.An avulsion threshold was deduced according to the demarcation equation.This avulsion threshold was then applied to conduct the risk assessment of avulsion in the YRE.The results show that:two dominant factors cover respectively geomorphic coefficient representing the topography-driven factor and fluvial erosion intensity representing the flood-driven factor,which were thus employed to define a two dimensional mathematical space in which the demarcation equation can be obtained;the avulsion threshold derived from the equation was also applied in the risk assessment of avulsion;and the avulsion threshold proposed in this study is more accurate,as compared with the existing thresholds.
文摘This paper analyzes the characteristics of the output gradient histogram and shortages of several traditional automatic threshold methods in order to segment the gradient image better. Then an improved double-threshold method is proposed, which is combined with the method of maximum classes variance, estimating-area method and double-threshold method. This method can automatically select two different thresholds to segment gradient images. The computer simulation is performed on the traditional methods and this algorithm and proves that this method can get satisfying result. Key words gradient histogram image - threshold selection - double-threshold method - maximum classes variance method CLC number TP 391. 41 Foundation item: Supported by the National Nature Science Foundation of China (50099620) and the Project of Chenguang Plan in Wuhan (985003062)Biography: YANG Shen (1977-), female, Ph. D. candidate, research direction: multimedia information processing and network technology.
基金the National Natural Science Foundation of China(Grant No.51534002)the Special Funds for Technological Innovation and Entrepreneurship of China Coal Science and Engineering Group Co.Ltd.(2018-TDMS011)。
文摘During the microstructural analysis of weakly cemented sandstone,the granule components and ductile structural parts of the sandstone are typically generalized.Considering the contact between granules in the microstructure of weakly cemented sandstone,three basic units can be determined:regular tetrahedra,regular hexahedra,and regular octahedra.Renormalization group models with granule-and pore-centered weakly cemented sandstone were established,and,according to the renormalization group transformation rule,the critical stress threshold of damage was calculated.The results show that the renormalization model using regular octahedra as the basic units has the highest critical stress threshold.The threshold obtained by iterative calculations of the granule-centered model is smaller than that obtained by the pore-centered model.The granule-centered calculation provides the lower limit(18.12%),and the pore-centered model provides the upper limit(36.36%).Within this range,the weakly cemented sandstone is in a phase-like critical state.That is,the state of granule aggregation transforms from continuous to discrete.In the relative stress range of 18.12%-36.36%,the weakly cemented sandstone exhibits an increased proportion of high-frequency signals(by 83.3%)and a decreased proportion of low-frequency signals(by 23.6%).The renormalization calculation results for weakly cemented sandstone explain the high-low frequency conversion of acoustic emission signals during loading.The research reported in this paper has important significance for elucidating the damage mechanism of weakly cemented sandstone.
文摘The purpose of this study is to apply different thresholding in mammogram images, and then we will determine which technique is the best in thresholding (extraction) malignant and benign tumors from the rest breast tissues. The used technique is Otsu method, because it is one of the most effective methods for most real world views with regard to uniformity and shape measures. Also, we present all the thresholding methods that used the concept of between class variance. We found from the experimental results that all the used thresholding techniques work well in detection normal breast tissues. But in abnormal tissues (breast tumors), we found that only neighborhood valley emphasis method gave best detection of malignant tumors. Also, the results demonstrate that variance and intensity contrast technique is the best in extraction the micro calcifications which represent the first signs of breast cancer.
基金This work is supported by the National Key Research and Development Plan of China under Grants No.2018YFC1503604the National Natural Science Foundation of China under Grants No.41721003,No.42074007the Key Laboratory of Geospace Environment and Geodesy,Ministry of Education,Wuhan University,No.19-01-08。
文摘As an important model for explaining the seismic rupture mode,the asperity model plays an important role in studying the stress accumulation of faults and the location of earthquake initiation.Taking Qilian-Haiyuan fault as an example,this paper combines geodetic method and b-value method to propose a multi-source observation data fusion detection method that accurately determines the asperity boundary named dual threshold search method.The method is based on the criterion that the b-value asperity boundary should be most consistent with the slip deficit rate asperity boundary.Then the optimal threshold combination of slip deficit rate and b-value is obtained through threshold search,which can be used to determine the boundary of the asperity.Based on this method,the study finds that there are four potential asperities on the Qilian-Haiyuan fault:two asperities(A1 and A2)are on the Tuolaishan segment and the other two asperities(B and C)are on Lenglongling segment and Jinqianghe segment,respectively.Among them,the lengths of asperities A1 and A2 on Tuolaishan segment are 17.0 km and 64.8 km,respectively.And the lower boundaries are 5.5 km and 15.5 km,respectively;The length of asperity B on Lenglongling segment is 70.7 km,and the lower boundary is 10.2 km.The length of asperity C on Jinqianghe segment is 42.3 km,and the lower boundary is 8.3 km.
基金supported by the National Natural Science Foundations of China(Nos.61136002,61472324)the Natural Science Foundation of Shanxi Province(No.2014JM8331)
文摘To overcome the shortcoming that the traditional minimum error threshold method can obtain satisfactory image segmentation results only when the object and background of the image strictly obey a certain type of probability distribution,one proposes the regularized minimum error threshold method and treats the traditional minimum error threshold method as its special case.Then one constructs the discrete probability distribution by using the separation between segmentation threshold and the average gray-scale values of the object and background of the image so as to compute the information energy of the probability distribution.The impact of the regularized parameter selection on the optimal segmentation threshold of the regularized minimum error threshold method is investigated.To verify the effectiveness of the proposed regularized minimum error threshold method,one selects typical grey-scale images and performs segmentation tests.The segmentation results obtained by the regularized minimum error threshold method are compared with those obtained with the traditional minimum error threshold method.The segmentation results and their analysis show that the regularized minimum error threshold method is feasible and produces more satisfactory segmentation results than the minimum error threshold method.It does not exert much impact on object acquisition in case of the addition of a certain noise to an image.Therefore,the method can meet the requirements for extracting a real object in the noisy environment.
基金Project (20010101) supported by the Ministry of Landand Resource of China
文摘The research of land use and land cover (LUCC) is an important aspect in the global change research. The goal of this study is to find methods of extraction of LUCC’s change outlined and change type from remotely sensed data. Take the country of Fengxian in Shanghai as an example, it was supposed two steps to finish extraction of LUCC information: the first step was to use different methods, which is used to outline change areas; the second step include methods of false composing of two-temporal and threshold value. Through combining two methods, a model rule is built and the LUCC product is obtained, four kinds of change type within the study area are given, and the results are obvious. Finally, the results support the application of the high resolution image and tasseled cap composition (greenness and wetness) in the specific regional too.
基金the National Key Research and Development Program(2016YFB1001304)and the National Natural Science Foundation of China(61631010).
文摘Background Ultrasonic tactile representation utilizes focused ultrasound to create tactile sensations on the bare skin of a user's hand that is not in contact with a device.This study is a preliminary investigation on whether different ultrasonic haptic rendering methods have an impact on the perceptual threshold.Methods This study conducted experiments with the adaptive step method to obtain participants'perceptual thresholds.We examine(1)whether different parts on the palm of the hand have different perceptual thresholds;(2)whether the perceptual threshold is different when the ultrasonic focus point is stationary and when it moves in different trajectories;(3)whether different moving speeds of the ultrasonic focus point have an influence on the perceptual threshold;and(4)whether the addition of a DC offset to the modulating wave has an impact on the perceptual threshold.Results The results show that the center of the palm is more sensitive to ultrasonic haptics than the fingertip;compared with a fast-moving focus point,the palm is more sensitive to a stationary and slow-moving focus point.When the modulating wave has a DC offset,the palm is sensitive to a much smaller modulation amplitude.Conclusion For the future ultrasonic tactile representation systems,dynamic adjustment of intensity is required to compensate the difference in perceptual thresholds under different rendering methods to achieve more realistic ultrasonic haptics.